From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 14 Feb 2011 13:17:14 +0100 Subject: [U-Boot] mpc5125: nand flash commands In-Reply-To: <4D591B31.9080702@ronetix.at> References: <4D591B31.9080702@ronetix.at> Message-ID: <4D591D4A.2020103@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/14/2011 01:08 PM, RONETIX - Asen Dimov wrote: > Hello, > Hi, > Have anybody made the nand support for mpc5125, especially commads for > flashing first stage boot loader and U-Boot: > nand_e, nand_w and nand_loader, which are implemented in > /fscale/cys/git-freescale/u-boot-2009.03/drivers/mtd/nand/mpc5125_nfc_mtc.c. They are not part of U-Boot mainline, and for this reason they are not discussed here. There is no mpc5125 NAND driver in u-boot mainline at the moment. > > The BSP from Freescale has these commands as as object file not source. > We need these sources to implement nand programming in our > JTAG programmer. > > Since U-Boot is GPL licensed all sources shout be public. You are right. Ask Freescale to publish those sources. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================