[U-Boot] [PATCH 3/3] mx31pdk: Make the full boot log visible

Fabio Estevam
2011-02-09T11:17:56Z

Use board_early_init_f so that the full boot log output can be displayed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
board/freescale/mx31pdk/mx31pdk.c | 7 ++++++-
include/configs/mx31pdk.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 2756e5a..a9f0fb4 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -45,7 +45,7 @@ void dram_init_banksize(void)
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
}

-int board_init(void)
+int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
__REG(CSCR_U(5)) = 0x0000d843;
@@ -56,6 +56,11 @@ int board_init(void)
mx31_uart1_hw_init();
mx31_spi2_hw_init();

+ return 0;
+}
+
+int board_init(void)
+{
gd->bd->bi_arch_number = MACH_TYPE_MX31_3DS; /* board id for linux */
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index d7286c0..86c758f 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -154,6 +154,7 @@
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 CSD0_BASE
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F 1

#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
--
1.6.0.4