[U-Boot] U-boot is not working in Beagle xM board.

[U-Boot] U-boot is not working in Beagle xM board.

[chinnathambi]

Hai,

          I cant boot the board in the Beable xM board. The board is having
processor ARM cortex A8. Please see the below error log.

 

Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)

Beagle xM Rev A

Reading boot sector

u-boot.bin not found or blank nand contents - attempting serial boot . . .

## Ready for binary (kermit) download to 0x80008000 at 115200 bps...

 

 

I copied the u-boot.bin file into the micro SD card as given in their order.
Please clarify in this regard.

Regards, 
Chinnathambi M 
  

 

[U-Boot] U-boot is not working in Beagle xM board.

[Albert ARIBAUD]

Hi,

Le 17/02/2011 05:47, chinnathambi a ?crit :
> Hai,
>
>            I cant boot the board in the Beable xM board. The board is having
> processor ARM cortex A8. Please see the below error log.
>
>
>
> Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)
>
> Beagle xM Rev A
>
> Reading boot sector
>
> u-boot.bin not found or blank nand contents - attempting serial boot . . .
>
> ## Ready for binary (kermit) download to 0x80008000 at 115200 bps...
>
>
>
>
>
> I copied the u-boot.bin file into the micro SD card as given in their order.
> Please clarify in this regard.

If I'm not mistaken, this is an issue with the loader already on the 
board, not with u-boot, since precisely u-boot.bin is not found. You 
should ask the question to the board manufacturer, or whoever is 
supposed to provide you support for it.

> Regards,
> Chinnathambi M

Amicalement,
-- 
Albert.