From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date: Fri, 04 Mar 2011 17:27:12 +0100
Subject: [U-Boot] MPC837x PCIe no link
Message-ID: <4D7112E0.30603@matrix-vision.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

All,

sorry to bother you again.
After my harddisk died I'm porting my latest 8377 work to TOT.
Unfortunately I'm lacking some commits that haven't been pushed to backup.


But everything's fine so far and the system is up and running, except PCIe.

Using the "old" binary left on the server PCIe has been working fine :

U-Boot 2010.12-rc1-00596-gcef659f-dirty (Nov 22 2010 - 17:22:20) MPC83XX
...
PCIE1: link

and the Wifi card is present and usable by Linux.

=> pci 2
Scanning PCI devices on bus 2
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
_____________________________________________________________
02.00.00   0x168c     0x001c     Network controller      0x00



With latest code running on the *same piece of hardware*

U-Boot 2011.03-rc1-00129-g1ce1ed1-dirty (Mar 04 2011 - 16:31:40) MPC83XX

I get "PCIE1: No link"


Dumping SerDes (e3000 + e3100) and PCIe core (400-7ff) registers shows 
now difference between both versions.

Any ideas what might be responsible for the link not being established ?



Regards,
Andr?

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner