From mboxrd@z Thu Jan  1 00:00:00 1970
From: llandre <r&d2@dave-tech.it>
Date: Sat, 05 Mar 2011 18:28:52 +0100
Subject: [U-Boot] Microblaze: how to generate correct xparameters.h file
Message-ID: <4D7272D4.5060605@dave-tech.it>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi all,
a colleague is facing the following problem.
When using ISE/EDK 12.4 to build a microblaze-based system, the 
xparameters.h file that is generated do not match u-boot sources so I 
can't build U-Boot. In fact #defines included in this file are prefixed 
by XPAR_ while U-Boot sources expect them to be prefixed by XILINX_. So 
how to generate correct xparameter.h file? I suspect we have some 
misconfigured flag in ISE/EDK environment ...
Any help would be appreciated.

Thanks in advance,
llandre

-- 
DAVE - Simply Embedded
web: www.dave.eu