From: Rogan Dawes <rogan@dawes.za.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [non-working configuraton, post relocation 7/7] DNS323 configuration
Date: Sat, 19 Mar 2011 13:51:02 +0200 [thread overview]
Message-ID: <4D8498A6.1060106@dawes.za.net> (raw)
In-Reply-To: <4D8458FC.4030407@denx.de>
On 2011/03/19 9:19 AM, Heiko Schocher wrote:
>> Marvell>> bootm
>> ## Booting image at 00100000 ...
>> Image Name: UBoot dns323
>> Image Type: ARM U-Boot Kernel Image (uncompressed)
>> Data Size: 170100 Bytes = 166.1 kB
>> Load Address: 03000000
>> Entry Point: 03000000
>> Verifying Checksum ... OK
>> OK
>>
>> Starting kernel ...
>
> With relocation, you must set TEXT_BASE to the value you start
> the image, so please try to set TEXT_BASE = load_addr.
>
> Also, if you do a ram image, don;t forget that with relocation
> the u-boot image gets relocated to the end of ram, so don;t choose
> a TEXT_BASE near the end of ram.
>
> If that not helps, you maybe need a debugger ...
>
> bye,
> Heiko
Hi Heiko,
I did see that, and thought it might have something to do with it. I
also tried building a version with the TEXT_BASE at 0x100000, but had
exactly the same result.
It sounds like a debugger will be my only option. Fortunately, I should
be getting a Segger J-Link JTAG adapter on Tuesday, and then maybe I can
figure out what is going on.
Regards,
Rogan
next prev parent reply other threads:[~2011-03-19 11:51 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 12:28 [U-Boot] Trying again: DNS323 Rogan Dawes
2011-03-18 8:04 ` [U-Boot] Working DNS323 config rogan at dawes.za.net
2011-03-18 19:34 ` Rogan Dawes
2011-03-18 8:04 ` [U-Boot] [PATCH 01/11] Orion5x: Correct DRAM bank detection rogan at dawes.za.net
2011-03-18 8:04 ` [U-Boot] [PATCH 02/11] IDE: Don't assume there are always two devices per bus rogan at dawes.za.net
2011-04-25 21:31 ` Wolfgang Denk
2011-03-18 8:04 ` [U-Boot] [PATCH 03/11] Align linebuf to avoid misaligned aliases of it rogan at dawes.za.net
2011-03-18 8:04 ` [U-Boot] [PATCH 04/11] Orion5x: bugfix: window size (mis)calculation rogan at dawes.za.net
2011-03-18 11:00 ` Prafulla Wadaskar
2011-03-18 8:04 ` [U-Boot] [PATCH 05/11] I2C: add Marvell TWSI simple driver rogan at dawes.za.net
2011-03-18 8:29 ` Heiko Schocher
2011-03-18 8:41 ` Rogan Dawes
2011-03-18 9:22 ` Heiko Schocher
2011-03-18 11:14 ` Rogan Dawes
2011-03-18 16:19 ` Wolfgang Denk
2011-03-18 8:04 ` [U-Boot] [PATCH 06/11] edminiv2: add I2C support using mvtwsi driver rogan at dawes.za.net
2011-03-18 10:57 ` Prafulla Wadaskar
2011-03-18 11:16 ` Rogan Dawes
2011-03-18 8:04 ` [U-Boot] [PATCH 07/11] Allow setting CONFIG_NR_DRAM_BANKS to a larger value rogan at dawes.za.net
2011-04-25 21:38 ` Wolfgang Denk
2011-03-18 8:04 ` [U-Boot] [PATCH 08/11] DNS323 CFI driver changes (hacks, testing only) rogan at dawes.za.net
2011-03-18 8:04 ` [U-Boot] [PATCH 09/11] Support passing a Marvell-specific ATAG rogan at dawes.za.net
2011-04-25 21:43 ` Wolfgang Denk
2011-03-18 8:04 ` [U-Boot] [PATCH 10/11] Copy the ramdisk from flash for the DNS323 rogan at dawes.za.net
2011-04-25 21:44 ` Wolfgang Denk
2011-04-26 7:09 ` Rogan Dawes
2011-03-18 8:09 ` [U-Boot] Non-working Relocated DNS323 config rogan at dawes.za.net
2011-03-18 10:53 ` Prafulla Wadaskar
2011-03-18 11:36 ` Rogan Dawes
2011-03-18 8:09 ` [U-Boot] [PATCH 1/7] Orion5x: Correct DRAM bank detection rogan at dawes.za.net
2011-03-18 10:52 ` Prafulla Wadaskar
2011-03-18 11:40 ` Rogan Dawes
2011-04-13 14:41 ` Prafulla Wadaskar
2011-03-18 8:09 ` [U-Boot] [PATCH 2/7] IDE: Don't assume there are always two devices per bus rogan at dawes.za.net
2011-03-18 8:09 ` [U-Boot] [PATCH 3/7] Allow setting CONFIG_NR_DRAM_BANKS to a larger value rogan at dawes.za.net
2011-03-18 8:10 ` [U-Boot] [PATCH 4/7] DNS323 CFI driver changes (hacks, testing only) rogan at dawes.za.net
2011-03-18 8:10 ` [U-Boot] [PATCH 5/7] Support passing a Marvell-specific ATAG rogan at dawes.za.net
2011-03-18 10:44 ` Prafulla Wadaskar
2011-03-18 11:44 ` Rogan Dawes
2011-03-18 8:10 ` [U-Boot] [PATCH 6/7] Copy the ramdisk from flash for the DNS323 rogan at dawes.za.net
2011-03-18 19:31 ` [U-Boot] [Working configuration, not for application 11/11] DNS323 configuration rogan at dawes.za.net
2011-03-18 19:39 ` [U-Boot] [non-working configuraton, post relocation 7/7] " rogan at dawes.za.net
2011-03-19 7:19 ` Heiko Schocher
2011-03-19 11:51 ` Rogan Dawes [this message]
2011-03-27 20:54 ` Rogan Dawes
2011-03-28 5:32 ` Heiko Schocher
2011-03-31 9:43 ` [U-Boot] how does Linux call the function from u-boot? sywang
2011-03-31 10:01 ` Wolfgang Denk
2011-03-31 23:59 ` sywang
2011-04-01 5:21 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D8498A6.1060106@dawes.za.net \
--to=rogan@dawes.za.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox