public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Rogan Dawes <rogan@dawes.za.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] CFI flash broken for 8-bit bus
Date: Wed, 30 Mar 2011 10:01:42 +0200	[thread overview]
Message-ID: <4D92E366.8080601@dawes.za.net> (raw)
In-Reply-To: <201103252332.39961.Aaron.Williams@caviumnetworks.com>

On 2011/03/26 8:32 AM, Aaron Williams wrote:
> I am still doing some testing and just added a fix today so that if a flash 
> chip that supports both 8 and 16-bits is on an 8-bit bus the interface is set 
> to 8-bits. I'll try and get patches out next week.
> 
> So far it's working fairly well on all of our boards, most of which have an 8-
> bit bus but one has a 16-bit bus. I had to change all of the defined addresses 
> for AMD parts and calculate the 16 and 32-bit addresses by applying a mask.
> 
> The CFI code *should* work if there's an 8-bit part on a 16-bit bus, but it 
> probably will not support two 8-bit parts in parallel. That should be doable 
> with some work.
> 
> -Aaron

Hi Aaron,

I'm looking forward to seeing your patches. With any luck, they'll also
work on my board, and a nasty hack can go away. :-)

Regards,

Rogan

  reply	other threads:[~2011-03-30  8:01 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-18  4:02 [U-Boot] CFI flash broken for 8-bit bus Aaron Williams
2011-03-18  7:12 ` Rogan Dawes
2011-03-18  7:48   ` Aaron Williams
2011-03-24  3:07   ` Aaron Williams
2011-03-24  5:20     ` Stefan Roese
2011-03-24 16:59     ` Rogan Dawes
2011-03-26  6:32       ` Aaron Williams
2011-03-30  8:01         ` Rogan Dawes [this message]
2011-03-30 11:14           ` Albert ARIBAUD
2011-04-02  6:27           ` Aaron Williams
  -- strict thread matches above, loose matches on Subject: below --
2018-04-19 15:17 Radovan Prodanovic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D92E366.8080601@dawes.za.net \
    --to=rogan@dawes.za.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox