From: Shinya Kuribayashi <skuribay@pobox.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] MIPS patches
Date: Sat, 02 Apr 2011 22:20:59 +0900 [thread overview]
Message-ID: <4D9722BB.2090704@pobox.com> (raw)
Hi,
Please pull the MIPS updates, thanks in advance.
--- 8< ---
The following changes since commit 67a490d60d70f2b01d55976440ba30154af96965:
atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN (2011-04-01 14:49:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mips.git master
Daniel Schwierzeck (5):
MIPS: Purple: Remove Purple support
MIPS: Move content of arch/mips/cpu to arch/mips/cpu/mips32
MIPS: Optimize the setup of CPU optimization flags
MIPS: IncaIP: Move all IncaIP specific code to separate subdirectory
MIPS: Au1x00: Move all Au1x00 specific code to separate subdirectory
MAINTAINERS | 1 -
MAKEALL | 4 +-
arch/mips/cpu/{ => mips32}/Makefile | 5 -
.../mips/cpu/mips32/au1x00}/Makefile | 15 +-
arch/mips/cpu/{ => mips32/au1x00}/au1x00_eth.c | 0
arch/mips/cpu/{ => mips32/au1x00}/au1x00_serial.c | 0
.../mips/cpu/{ => mips32/au1x00}/au1x00_usb_ohci.c | 0
.../mips/cpu/{ => mips32/au1x00}/au1x00_usb_ohci.h | 0
.../mips/cpu/mips32/au1x00}/config.mk | 12 +-
arch/mips/cpu/{ => mips32}/cache.S | 4 -
arch/mips/cpu/{ => mips32}/config.mk | 15 +-
arch/mips/cpu/{ => mips32}/cpu.c | 0
.../mips/cpu/mips32/incaip}/Makefile | 16 +-
arch/mips/cpu/{ => mips32/incaip}/asc_serial.c | 83 ---
arch/mips/cpu/{ => mips32/incaip}/asc_serial.h | 0
.../mips/cpu/mips32/incaip}/config.mk | 12 +-
arch/mips/cpu/{ => mips32/incaip}/incaip_clock.c | 0
arch/mips/cpu/{ => mips32/incaip}/incaip_wdt.S | 0
arch/mips/cpu/{ => mips32}/interrupts.c | 0
arch/mips/cpu/{ => mips32}/start.S | 32 -
arch/mips/include/asm/inca-ip.h | 10 -
arch/mips/lib/board.c | 10 -
board/purple/flash.c | 595 --------------------
board/purple/lowlevel_init.S | 36 --
board/purple/purple.c | 284 ----------
board/purple/sconsole.c | 125 ----
board/purple/sconsole.h | 46 --
board/purple/u-boot.lds | 75 ---
boards.cfg | 51 +-
doc/README.Purple | 84 ---
include/configs/purple.h | 173 ------
31 files changed, 53 insertions(+), 1635 deletions(-)
rename arch/mips/cpu/{ => mips32}/Makefile (87%)
copy {board/purple => arch/mips/cpu/mips32/au1x00}/Makefile (83%)
rename arch/mips/cpu/{ => mips32/au1x00}/au1x00_eth.c (100%)
rename arch/mips/cpu/{ => mips32/au1x00}/au1x00_serial.c (100%)
rename arch/mips/cpu/{ => mips32/au1x00}/au1x00_usb_ohci.c (100%)
rename arch/mips/cpu/{ => mips32/au1x00}/au1x00_usb_ohci.h (100%)
copy {board/purple => arch/mips/cpu/mips32/au1x00}/config.mk (83%)
rename arch/mips/cpu/{ => mips32}/cache.S (98%)
rename arch/mips/cpu/{ => mips32}/config.mk (83%)
rename arch/mips/cpu/{ => mips32}/cpu.c (100%)
rename {board/purple => arch/mips/cpu/mips32/incaip}/Makefile (83%)
rename arch/mips/cpu/{ => mips32/incaip}/asc_serial.c (77%)
rename arch/mips/cpu/{ => mips32/incaip}/asc_serial.h (100%)
rename {board/purple => arch/mips/cpu/mips32/incaip}/config.mk (83%)
rename arch/mips/cpu/{ => mips32/incaip}/incaip_clock.c (100%)
rename arch/mips/cpu/{ => mips32/incaip}/incaip_wdt.S (100%)
rename arch/mips/cpu/{ => mips32}/interrupts.c (100%)
rename arch/mips/cpu/{ => mips32}/start.S (92%)
delete mode 100644 board/purple/flash.c
delete mode 100644 board/purple/lowlevel_init.S
delete mode 100644 board/purple/purple.c
delete mode 100644 board/purple/sconsole.c
delete mode 100644 board/purple/sconsole.h
delete mode 100644 board/purple/u-boot.lds
delete mode 100644 doc/README.Purple
delete mode 100644 include/configs/purple.h
next reply other threads:[~2011-04-02 13:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-02 13:20 Shinya Kuribayashi [this message]
2011-04-05 10:17 ` [U-Boot] [GIT PULL] MIPS patches Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-07-31 15:05 Shinya Kuribayashi
2011-08-02 19:46 ` Wolfgang Denk
2011-05-09 15:17 Shinya Kuribayashi
2011-05-10 20:35 ` Wolfgang Denk
2011-02-12 5:10 Shinya Kuribayashi
2011-02-12 19:38 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D9722BB.2090704@pobox.com \
--to=skuribay@pobox.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox