From mboxrd@z Thu Jan 1 00:00:00 1970 From: Valentin Longchamp Date: Mon, 11 Apr 2011 11:57:12 +0200 Subject: [U-Boot] [PATCH] arm/km: add mkimage config file for uart download In-Reply-To: References: Message-ID: <4DA2D078.7050302@keymile.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Prafulla Wadaskar wrote: > >> -----Original Message----- >> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com] >> Sent: Friday, April 08, 2011 6:18 PM >> To: u-boot at lists.denx.de >> Cc: holger.brunck at keymile.com; hs at denx.de; Valentin Longchamp; Wolfgang >> Denk; Detlev Zundel; Prafulla Wadaskar >> Subject: [PATCH] arm/km: add mkimage config file for uart download >> >> Signed-off-by: Valentin Longchamp >> Signed-off-by: Holger Brunck >> Acked-by: Heiko Schocher >> cc: Wolfgang Denk >> cc: Detlev Zundel >> cc: Prafulla Wadaskar >> --- >> board/keymile/km_arm/kwbimage-uart.cfg | 179 >> ++++++++++++++++++++++++++++++++ >> 1 files changed, 179 insertions(+), 0 deletions(-) >> create mode 100644 board/keymile/km_arm/kwbimage-uart.cfg >> >> diff --git a/board/keymile/km_arm/kwbimage-uart.cfg >> b/board/keymile/km_arm/kwbimage-uart.cfg >> new file mode 100644 >> index 0000000..d8c517c >> --- /dev/null >> +++ b/board/keymile/km_arm/kwbimage-uart.cfg >> @@ -0,0 +1,179 @@ >> +# >> +# (C) Copyright 2010 >> +# Heiko Schocher, DENX Software Engineering, hs at denx.de. >> +# >> +# See file CREDITS for list of people who contributed to this >> +# project. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation; either version 2 of >> +# the License, or (at your option) any later version. >> +# >> +# This program is distributed in the hope that it will be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write to the Free Software >> +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, >> +# MA 02110-1301 USA >> +# >> +# Refer docs/README.kwimage for more details about how-to configure >> +# and create kirkwood boot image >> +# >> + >> +# Boot Media configurations >> +BOOT_FROM uart # Boot from SPI flash > > Comments are wrong here.. > I think this is more over debug support. i.e. if you want to bring up broken board with the help of UART. You are right, the comment definitely is wrong here. I will fix this (it is the same in the memphis SDRAM patch). > > Does it makes sense to mainline? > We indeed use it for development and debug support. What is your usual policy about such config files for marvell boards and u-boot mainlining ? We will stick to it as well. -- Valentin Longchamp Embedded Software Engineer Hardware and Chip Integration ______________________________________ KEYMILE AG Schwarzenburgstr. 73 CH-3097 Liebefeld Phone +41 31 377 1318 Fax +41 31 377 1212 valentin.longchamp at keymile.com www.keymile.com ______________________________________ KEYMILE: A Specialist as a Partner