From: Valentin Longchamp <valentin.longchamp@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Keymile boards mainlining, part 2
Date: Mon, 11 Apr 2011 12:05:18 +0200 [thread overview]
Message-ID: <4DA2D25E.2050806@keymile.com> (raw)
In-Reply-To: <F766E4F80769BD478052FB6533FA745D19F9A2A827@SC-VEXCH4.marvell.com>
Prafulla Wadaskar wrote:
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>> On Behalf Of Valentin Longchamp
>> Sent: Friday, April 08, 2011 6:23 PM
>> To: u-boot at lists.denx.de
>> Cc: hs at denx.de; holger.brunck at keymile.com
>> Subject: Re: [U-Boot] [PATCH] Keymile boards mainlining, part 2
>>
>> Sorry, the whole series is not numbered, -N statt -n ... it will be
>> corrected for the very likely v2 of the series posting.
>
> It would be good if you can split patch series in to small group as per functionality/SoC, so that it is easy to pull.
>
I agree with you about this point. We did it this way since even if some
patches affect only one SoC/functionality, there may be some
dependancies between patches that are not in the same SoC/functionality
group.
I'll see what I can do.
--
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________
KEYMILE AG
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318
Fax +41 31 377 1212
valentin.longchamp at keymile.com
www.keymile.com
______________________________________
KEYMILE: A Specialist as a Partner
prev parent reply other threads:[~2011-04-11 10:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 12:47 [U-Boot] [PATCH] Keymile boards mainlining, part 2 Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] lib, vsprintf: introduce strict_strtoul Valentin Longchamp
2011-04-29 23:12 ` Wolfgang Denk
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: add DIP switch detection Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: remove hdlc_enet implementation Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: cleanup coding style for mgcoge.c Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge files to km82xx Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: move SDRAM config to board config Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] poweprc/km82xx: add board specific environment variable Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] arm/km: add addbootcount " Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] cramfs: make cramfs usable without a NOR flash Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] i2c, soft_i2c: deblock bus if switching to another i2c bus Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: fix initial_boot_bank for bootpackages Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] common/hush: make get_local_var visible for other users Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: implement setboardid as a command Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: replace env var checkboardidlist by function Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: add pnvramsize to default environment Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: fix coding style issues in generic header Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: simplify default environment Valentin Longchamp
2011-04-08 12:52 ` [U-Boot] [PATCH] Keymile boards mainlining, part 2 Valentin Longchamp
2011-04-08 14:19 ` Valentin Longchamp
2011-04-09 9:29 ` Prafulla Wadaskar
2011-04-11 10:05 ` Valentin Longchamp [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA2D25E.2050806@keymile.com \
--to=valentin.longchamp@keymile.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox