From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Date: Wed, 13 Apr 2011 22:31:36 +0200 [thread overview]
Message-ID: <4DA60828.8010807@aribaud.net> (raw)
In-Reply-To: <BANLkTimBXHhS9dZFQGTRwj=n+3+2P1wY9w@mail.gmail.com>
Tom,
Le 13/04/2011 22:26, Tom Warren a ?crit :
> Albert,
>
> On Wed, Apr 13, 2011 at 1:14 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>> Hi Tom,
>>
>> Le 13/04/2011 22:07, Tom Warren a ?crit :
>>>
>>> Signed-off-by: Tom Warren<twarren@nvidia.com>
>>> ---
>>> arch/arm/include/asm/arch-tegra2/gpio.h | 59
>>> +++++++++++++++++++++++++++++
>>> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
>>> 2 files changed, 60 insertions(+), 0 deletions(-)
>>> create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h
>>>
>>> diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h
>>> b/arch/arm/include/asm/arch-tegra2/gpio.h
>>> new file mode 100644
>>> index 0000000..0fb8f0d
>>> --- /dev/null
>>> +++ b/arch/arm/include/asm/arch-tegra2/gpio.h
>>> @@ -0,0 +1,59 @@
>>> +/*
>>> + * Copyright (c) 2011, Google Inc. All rights reserved.
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +
>>> +#ifndef _TEGRA2_GPIO_H_
>>> +#define _TEGRA2_GPIO_H_
>>> +
>>> +/*
>>> + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4
>>> ports,
>>> + * each with 8 GPIOs.
>>> + */
>>> +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */
>>> +#define TEGRA_GPIO_BANKS 8 /* The number of banks */
>>> +
>>> +/* GPIO Controller registers for a single bank */
>>> +struct gpio_ctlr_bank {
>>> + uint gpio_config[TEGRA_GPIO_PORTS];
>>> + uint gpio_dir_out[TEGRA_GPIO_PORTS];
>>> + uint gpio_out[TEGRA_GPIO_PORTS];
>>> + uint gpio_in[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_status[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_enable[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_level[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_clear[TEGRA_GPIO_PORTS];
>>> +};
>>> +
>>> +struct gpio_ctlr {
>>> + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
>>> +};
>>> +
>>> +#define GPIO_BANK(x) ((x)>> 5)
>>> +#define GPIO_PORT(x) (((x)>> 3)& 0x3)
>>> +#define GPIO_BIT(x) ((x)& 0x7)
>>> +
>>> +/*
>>> + * GPIO_PI3 = Port I = 8, bit = 3.
>>> + * Seaboard: used for UART/SPI selection
>>> + * Harmony: not used
>>> + */
>>> +#define GPIO_PI3 ((8<< 3) | 3)
>>> +
>>> +#endif /* TEGRA2_GPIO_H_ */
>>> diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> b/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> index 7b0f5cc..742a75a 100644
>>> --- a/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> @@ -30,6 +30,7 @@
>>> #define NV_PA_TMRUS_BASE 0x60005010
>>> #define NV_PA_CLK_RST_BASE 0x60006000
>>> #define NV_PA_FLOW_BASE 0x60007000
>>> +#define NV_PA_GPIO_BASE 0x6000D000
>>> #define NV_PA_EVP_BASE 0x6000F000
>>> #define NV_PA_APB_MISC_BASE 0x70000000
>>> #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000)
>>
>> These are header files only, and they do not even contain function-like
>> macros, so where is the functionality exactly?
> In the next patch (3/3) - the macros are used in seaboard.c to drive
> the UART_DISABLE GPIO low to enable the UART in U-Boot POST.
Could you just rename the patch "Add basic GPIO definitions" then?
Amicalement,
--
Albert.
next prev parent reply other threads:[~2011-04-13 20:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 20:07 [U-Boot] [PATCH 0/3] Fix hang when loading U-Boot from SPI or NAND Tom Warren
2011-04-13 20:07 ` [U-Boot] [PATCH 1/3] arm: Tegra2: Add missing PLLX init Tom Warren
2011-04-13 20:12 ` Albert ARIBAUD
2011-04-13 20:23 ` Tom Warren
2011-04-13 20:07 ` [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality Tom Warren
2011-04-13 20:14 ` Albert ARIBAUD
2011-04-13 20:26 ` Tom Warren
2011-04-13 20:31 ` Albert ARIBAUD [this message]
2011-04-13 20:36 ` Tom Warren
2011-04-13 20:07 ` [U-Boot] [PATCH 3/3] arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init Tom Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA60828.8010807@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox