From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 15 Apr 2011 20:07:55 +0200 Subject: [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version In-Reply-To: <1302574692-28134-1-git-send-email-festevam@gmail.com> References: <1302574692-28134-1-git-send-email-festevam@gmail.com> Message-ID: <4DA8897B.70202@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 04/12/2011 04:18 AM, Fabio Estevam wrote: > Use the same method of the Linux kernel to print the MX31 silicon version on > boot. > > Tested on a MX31PDK with a 2.0 silicon, where it shows: > > CPU: Freescale i.MX31 rev 2.0 at 531 MHz > > Signed-off-by: Fabio Estevam > Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================