* [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?
@ 2011-04-18 10:53 Orjan Friberg
0 siblings, 0 replies; only message in thread
From: Orjan Friberg @ 2011-04-18 10:53 UTC (permalink / raw)
To: u-boot
Hi,
The mux configuration in board/ti/beagle/beagle.h says
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/
MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/
The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6.
(Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2
working on a custom 3730 board.)
Thanks,
Orjan
--
Orjan Friberg
FlatFrog Laboratories AB
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-04-18 10:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-18 10:53 [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2? Orjan Friberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox