* [U-Boot] U-Boot Digest, Vol 35, Issue 28
[not found] <mailman.8146.1303201532.8190.u-boot@lists.denx.de>
@ 2011-04-19 9:27 ` ByteLee
0 siblings, 0 replies; only message in thread
From: ByteLee @ 2011-04-19 9:27 UTC (permalink / raw)
To: u-boot
? 4/19/11 4:25 PM, u-boot-request at lists.denx.de ??:
> Send U-Boot mailing list submissions to
> u-boot at lists.denx.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.denx.de/mailman/listinfo/u-boot
> or, via email, send a message with subject or body 'help' to
> u-boot-request at lists.denx.de
>
> You can reach the person managing the list at
> u-boot-owner at lists.denx.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of U-Boot digest..."
>
>
> Today's Topics:
>
> 1. [PATCH v2] S5P: GPIO Macro Values Corrected. (Chander Kashyap)
> 2. Ticket number: YG764T 854R (COCA-COLA at une-pmta04.une.net.co)
> 3. Re: [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash
> driver (Reinhard Meyer)
> 4. Re: [PATCH 1/4] atmel_dataflash: remove use of
> get_timer_masked (Reinhard Meyer)
> 5. Re: [PATCH 2/3] avr32: fix linking (Reinhard Meyer)
> 6. Beagle mux config: nCS5 vs. DMAREQ2? (Orjan Friberg)
> 7. Re: [PATCH 1/3] ARM: don't panic if no flash is there
> (Albert ARIBAUD)
> 8. subscribe me to this list (Ratheendran R)
> 9. Re: subscribe me to this list (Anatolij Gustschin)
> 10. Re: [PATCH 00/15] [REWORK AVR32/AT91] additional changes for
> avr32 (Reinhard Meyer)
> 11. Re: [PATCH 00/15] [REWORK AVR32/AT91] additional changes for
> avr32 (Andreas Bie?mann)
> 12. [PATCH V2 01/15] avr32/config.mk: simplify PLATFORM_RELFLAGS
> (Andreas Bie?mann)
> 13. [PATCH V2 11/15] atngw100: move CONFIG_SYS_TEXT_BASE to
> header (Andreas Bie?mann)
> 14. [PATCH V2 13/15] favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to
> header (Andreas Bie?mann)
> 15. [PATCH V2 08/15] favr-32-ezkit: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 16. [PATCH V2 15/15] hammerhead: move CONFIG_SYS_TEXT_BASE to
> header (Andreas Bie?mann)
> 17. [PATCH V2 07/15] atstk1006: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 18. [PATCH-V2 1/2] at91: reworked support for meesc board
> (Daniel Gorsulowski)
> 19. [PATCH V2 09/15] hammerhead: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 20. [PATCH V2 03/15] atngw100: fix "#define XXXX 1" (Andreas Bie?mann)
> 21. [PATCH V2 00/15] *** SUBJECT HERE *** (Andreas Bie?mann)
> 22. [PATCH V2 04/15] atstk1002: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 23. [PATCH V2 10/15] mimc200: fix "#define XXXX 1" (Andreas Bie?mann)
> 24. [PATCH V2 12/15] atstk100x: move CONFIG_SYS_TEXT_BASE to
> header (Andreas Bie?mann)
> 25. [PATCH V2 05/15] atstk1003: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 26. [PATCH V2 06/15] atstk1004: fix "#define XXXX 1"
> (Andreas Bie?mann)
> 27. [PATCH V2 14/15] mimc200: move CONFIG_SYS_TEXT_BASE to header
> (Andreas Bie?mann)
> 28. [PATCH V2 02/15] avr32: use single linker script
> (Andreas Bie?mann)
> 29. [PATCH-V2 2/2] at91: reworked support for otc570 board
> (Daniel Gorsulowski)
> 30. Re: [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard.
> (Srinath R)
> 31. [PATCHv2 1/2] MMC: make b_max unconditional (John Rigby)
> 32. [PATCHv2 2/2] mmc: omap_hsmmc.c: disable multiblock rw on old
> rev omap34xx silicon (John Rigby)
> 33. [PATCH v2 0/6] TFTP server (Luca Ceresoli)
> 34. [PATCH v2 1/6] README: remove spurious line (Luca Ceresoli)
> 35. [PATCH v2 2/6] NET: pass source IP address to packet handlers
> (Luca Ceresoli)
> 36. [PATCH v2 3/6] TFTP: rename "server" to "remote" (Luca Ceresoli)
> 37. [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ
> (Luca Ceresoli)
> 38. [PATCH v2 6/6] TFTP: add tftpsrv command (Luca Ceresoli)
> 39. [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive
> (Luca Ceresoli)
> 40. [PATCH] MX31: mx31pdk: Make the board name simpler.
> (Fabio Estevam)
> 41. [PATCH v5] MX31: Introduce get_reset_cause() (Fabio Estevam)
> 42. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address
> framework to usbnet (Remy Bohmer)
> 43. Loan Offer... (Norton Finance Loan)
> 44. Re: [PATCH v4 1/5] Add support for SMSC95XX USB 2.0
> 10/100MBit Ethernet Adapter (Wolfgang Denk)
> 45. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address
> framework to usbnet (Wolfgang Denk)
> 46. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address
> framework to usbnet (Wolfgang Denk)
> 47. [PATCH] GPIO: Tegra2: add GPIO driver for Seaboard and
> Harmony (Tom Warren)
> 48. Re: [PATCH] BeagleBoard: Added LED driver (Paulraj, Sandeep)
> 49. Re: [PATCH v3] omap3_beagle: enable the use of a plain text
> file named uEnv.txt instead of boot.scr (Paulraj, Sandeep)
> 50. Re: [PATCH v3] OMAP3: BeagleBoard: Enable pullups on i2c2.
> (Paulraj, Sandeep)
> 51. Re: [PATCH v2] OMAP3: BeagleBoard: add xM rev B to ID table
> (Paulraj, Sandeep)
> 52. Re: [PATCH v2] OMAP3: BeagleBoard: add more expansionboard
> IDs (Paulraj, Sandeep)
> 53. Re: [PATCH] BeagleBoard: add xM rev C to ID table
> (Paulraj, Sandeep)
> 54. Re: [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard.
> (Paulraj, Sandeep)
> 55. Re: [PATCH 0/9] Update support for CM-T35 (Paulraj, Sandeep)
> 56. ATM pin is 822 (ATM CARD DEPARTMENT)
> 57. Re: [PATCH v3] omap3_beagle: enable the use of a plain text
> file named uEnv.txt instead of boot.scr (Wolfgang Denk)
> 58. Please pull u-boot-ti/master (s-paulraj at ti.com)
> 59. Re: [PATCH v3] omap3_beagle: enable the use of a plain text
> file named uEnv.txt instead of boot.scr (Paulraj, Sandeep)
> 60. Please pull u-boot-ti/master (s-paulraj at ti.com)
> 61. Fix for overlapping sections? (Ciummo, Larry (DS-1))
> 62. Re: [V1 0/3] OpenRD-Client and OpenRD-Ultimate support
> (Clint Adams)
> 63. [PATCH v2 0/4] support for OpenRD-Client and OpenRD-Ultimate
> (Clint Adams)
> 64. [PATCH v2 2/4] Add definitions for OpenRD-Client and
> OpenRD-Ultimate (Clint Adams)
> 65. [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and
> OpenRD-Ultimate (Clint Adams)
> 66. [PATCH v2 1/4] Rename openrd_base files to openrd (Clint Adams)
> 67. [PATCH v2 4/4] Enable multiple fs options for Marvell SoC
> family on OpenRD boards (Clint Adams)
> 68. [PATCH] ehci-pci: Fix PCI EHCI driver for 36-bit (Zhao Chenhui)
> 69. Re: [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and
> OpenRD-Ultimate (Prafulla Wadaskar)
> 70. Issue with ehci-pci on MPC8548 (Sandeep Kumar Gopalpet)
> 71. Re: Please pull u-boot-ti/master (Albert ARIBAUD)
> 72. help for porting u-boot (Ratheendran R)
> 73. PLEASE ACCEPT MY REGUEST (PLEASE ACCEPT MY REGUEST)
> 74. [PATCH 0/9] Patch set for some Freescale ColdFire boards
> (Jason Jin)
> 75. [PATCH 1/9] Fix the configuration broken for ColdFire boards.
> (Jason Jin)
> 76. [PATCH V2 2/9] ColdFire: Change the way to set platform CPP
> flags (Jason Jin)
> 77. [PATCH V2 3/9] Env and lds file clean up for ColdFire M5445x
> and M547x/8x boards. (Jason Jin)
> 78. [PATCH 6/9] Disable the NFS define for 52277 board. (Jason Jin)
> 79. [PATCH 4/9] Clean up lds files for some ColdFire nommu chips
> (Jason Jin)
> 80. [PATCH V2 5/9] Enable the dm9000 on ColdFire 5253DEMO board.
> (Jason Jin)
> 81. [PATCH 7/9] ColdFire:Add mb for 5253 dram initialization
> (Jason Jin)
> 82. [PATCH 8/9] Change the env settings for u-boot update (Jason Jin)
> 83. [PATCH 9/9] sync the buffer descriptor IO for coldfire FEC
> (Jason Jin)
> 84. Status of ethernet support for Beagleboard xM ? (Bids O'Bids)
> 85. Status of ethernet support for Beagleboard xM ? (Bids O'Bids)
> 86. UEC phy not working on first try (DUNDA Matthias)
> 87. [PATCH] Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE
> comments (Michael Jones)
> 88. Re: [PATCH] S5P:SROM config code moved to s5p-common
> directory (Minkyu Kang)
> 89. Re: [PATCH v2] S5P: GPIO Macro Values Corrected. (Minkyu Kang)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Apr 2011 15:38:43 +0530
> From: Chander Kashyap<chander.kashyap@linaro.org>
> Subject: [U-Boot] [PATCH v2] S5P: GPIO Macro Values Corrected.
> To: u-boot at lists.denx.de
> Cc: linaro-dev at lists.linaro.org, bjlee at samsung.com,
> patches at linaro.org, mk7.kang at samsung.com, Chander Kashyap
> <chander.kashyap@linaro.org>, samsung at lists.linaro.org
> Message-ID:
> <1303121323-22997-1-git-send-email-chander.kashyap@linaro.org>
>
> S5PC2XX: Macro values for Pull Up and Driver Strength were wrong.
> S5PC1XX: Macro values for Driver Strength were wrong.
>
> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org>
> ---
>
> Changes for V2:
> - Macro value order fixed.
> - Added Changes for S5PC1XX.
>
> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 4 ++--
> arch/arm/include/asm/arch-s5pc2xx/gpio.h | 7 +++----
> 2 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
> index 2df33a6..485b9bf 100644
> --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
> +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
> @@ -149,8 +149,8 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
>
> /* Drive Strength level */
> #define GPIO_DRV_1X 0x0
> -#define GPIO_DRV_2X 0x1
> -#define GPIO_DRV_3X 0x2
> +#define GPIO_DRV_3X 0x1
> +#define GPIO_DRV_2X 0x2
> #define GPIO_DRV_4X 0x3
> #define GPIO_DRV_FAST 0x0
> #define GPIO_DRV_SLOW 0x1
> diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
> index 05e5b3e..38303e4 100644
> --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h
> +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
> @@ -99,14 +99,13 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
> /* Pull mode */
> #define GPIO_PULL_NONE 0x0
> #define GPIO_PULL_DOWN 0x1
> -#define GPIO_PULL_UP 0x2
> +#define GPIO_PULL_UP 0x3
>
> /* Drive Strength level */
> #define GPIO_DRV_1X 0x0
> -#define GPIO_DRV_2X 0x1
> -#define GPIO_DRV_3X 0x2
> +#define GPIO_DRV_3X 0x1
> +#define GPIO_DRV_2X 0x2
> #define GPIO_DRV_4X 0x3
> #define GPIO_DRV_FAST 0x0
> #define GPIO_DRV_SLOW 0x1
> -
> #endif
> --
> 1.7.1
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 18 Apr 2011 03:18:19 -0700
> From: COCA-COLA at une-pmta04.une.net.co, "INC."@une-pmta04.une.net.co
> Subject: [U-Boot] Ticket number: YG764T 854R
> To: Recipients<COCA-COLA@une-pmta04.une.net.co>
> Message-ID:<20110418101852.97039213DE4@une-pmta04.une.net.co>
> Content-Type: text/plain; charset="iso-8859-1"
>
> COCA-COLA INC.
> PO Box 1010,Great Britain.
> L70 1NL,United Kingdom
>
> Seria No: 110922
> Ticket number: YG764T 854R
>
> Congratulations!!!
>
> Your email address has just won you the sum of ?200, 000. 00 (Great British Pounds Sterlings) In the on going Coca-Cola Inc. Season's Promotion UK 2011.In line with The commemorating event marking our 25th anniversary, We rolled out over 75,000.000.00 (Seventy Five Million Great Britain Pounds) for our 25TH Anniversary Draws you are among the 7 lucky winners.
>
> To claim your prize contact our Claims Department via email with Personal details. E-mail: clearingpaymenthouse at gmail.com
>
> 1. Scan copy of your identity Proof.
> 2. Complete Names:
> 3. Address:
> 4. Age:
> 5. Occupation:
> 6. Telephone:
> 7. Sex: Male
> 8. Marital Status:
> 9. Country:
> 10: State:
>
> IMPORTANT:Please fill the below verification form required for authentication and verification by the India High Commission in London:
>
> ANNOUNCER.
> Sir Edward C. N. Branson
> +44-704-579-2572
> Copyright ? Coca-Cola Inc 2011 Times Internet Limited. All rights reserved
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 18 Apr 2011 12:36:23 +0200
> From: Reinhard Meyer<u-boot@emk-elektronik.de>
> Subject: Re: [U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI
> dataflash driver
> To: Remy Bohmer<linux@bohmer.net>
> Cc: u-boot at lists.denx.de
> Message-ID:<4DAC1427.7060706@emk-elektronik.de>
> Content-Type: text/plain; charset=ISO-8859-15
>
> Dear Remy Bohmer,
>> Signed-off-by: Remy Bohmer<linux@bohmer.net>
>> ---
>> drivers/spi/atmel_dataflash_spi.c | 8 ++++----
>> 1 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
>> index 4a5c4aa..2f23f54 100644
>> --- a/drivers/spi/atmel_dataflash_spi.c
>> +++ b/drivers/spi/atmel_dataflash_spi.c
>> @@ -133,7 +133,7 @@ unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
>>
>> unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
>> {
>> - unsigned int timeout;
>> + u32 time_start, timeout;
>>
>> pDesc->state = BUSY;
>>
>> @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
>> }
>>
>> /* arm simple, non interrupt dependent timer */
>> - reset_timer_masked();
>> - timeout = 0;
>> + time_start = get_timer(0);
>>
>> writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
>> while (!(readl(AT91_BASE_SPI + AT91_SPI_SR)& AT91_SPI_RXBUFF)&&
>> - ((timeout = get_timer_masked())< CONFIG_SYS_SPI_WRITE_TOUT));
>> + ((timeout = get_timer(time_start))< CONFIG_SYS_SPI_WRITE_TOUT));
>> +
>> writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
>> pDesc->state = IDLE;
> This issue had already been fixed by the ATMEL rework.
>
> But you are welcome to further "fix" this driver to use structure SoC access ;)
>
> Best Regards, Reinhard
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 18 Apr 2011 12:41:14 +0200
> From: Reinhard Meyer<u-boot@emk-elektronik.de>
> Subject: Re: [U-Boot] [PATCH 1/4] atmel_dataflash: remove use of
> get_timer_masked
> To: Alessandro Rubini<rubini@gnudd.com>
> Cc: u-boot at lists.denx.de
> Message-ID:<4DAC154A.6080500@emk-elektronik.de>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Dear Alessandro Rubini:
>> Commit 5dca710a3d7703e41da0e9894f2d71f9e25bea6b removed
>> get_timer_masked for at91. The dataflash driver was still
>> using it and so stopped compiling. This blindly fixes
>> the compilation problem (I am not currently using dataflash).
>>
>> Signed-off-by: Alessandro Rubini<rubini@gnudd.com>
>> ---
>> drivers/spi/atmel_dataflash_spi.c | 4 ++--
>> 1 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
>> index 4a5c4aa..d5215c0 100644
>> --- a/drivers/spi/atmel_dataflash_spi.c
>> +++ b/drivers/spi/atmel_dataflash_spi.c
>> @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
>> }
>>
>> /* arm simple, non interrupt dependent timer */
>> - reset_timer_masked();
>> + reset_timer();
>> timeout = 0;
>>
>> writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
>> while (!(readl(AT91_BASE_SPI + AT91_SPI_SR)& AT91_SPI_RXBUFF)&&
>> - ((timeout = get_timer_masked())< CONFIG_SYS_SPI_WRITE_TOUT));
>> + ((timeout = get_timer(0))< CONFIG_SYS_SPI_WRITE_TOUT));
>> writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
>> pDesc->state = IDLE;
>>
> a) reset_timer(), and all *_masked() timer functions are depreciated and have been
> removed from AT91 timer code
> b) the problem has already been fixed in current u-boot-atmel/next
>
> Best Regards,
> Reinhard
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 18 Apr 2011 12:53:12 +0200
> From: Reinhard Meyer<u-boot@emk-elektronik.de>
> Subject: Re: [U-Boot] [PATCH 2/3] avr32: fix linking
> To: Andreas Bie?mann<biessmann@corscience.de>
> Cc: u-boot at lists.denx.de
> Message-ID:<4DAC1818.9050709@emk-elektronik.de>
> Content-Type: text/plain; charset=UTF-8
>
> Dear Andreas Bie?mann:
>> This patch fixes following error:
>>
>> ---8<---
>> avr32-linux-ld: --gc-sections and -r may not be used together
>> --->8---
>>
>> Since 8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken due
>> to linking error as seen above.
>>
>> Signed-off-by: Andreas Bie?mann<biessmann@corscience.de>
>> ---
>> arch/avr32/config.mk | 2 +-
>> board/atmel/atngw100/config.mk | 1 -
>> board/atmel/atstk1000/config.mk | 1 -
>> board/earthlcd/favr-32-ezkit/config.mk | 1 -
>> board/mimc/mimc200/config.mk | 1 -
>> board/miromico/hammerhead/config.mk | 1 -
>> 6 files changed, 1 insertions(+), 6 deletions(-)
> Applied to u-boot-atmel/next, thanks.
>
> Reinhard
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 18 Apr 2011 12:53:53 +0200
> From: Orjan Friberg<orjan.friberg@flatfrog.com>
> Subject: [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?
> To: "u-boot at lists.denx.de"<u-boot@lists.denx.de>
> Message-ID:<4DAC1841.2030408@flatfrog.com>
> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed
>
> Hi,
>
> The mux configuration in board/ti/beagle/beagle.h says
>
> MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/
> MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/
>
> The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6.
>
> (Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2
> working on a custom 3730 board.)
>
> Thanks,
> Orjan
>
^ permalink raw reply [flat|nested] only message in thread