From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Wed, 20 Apr 2011 07:56:37 +0200
Subject: [U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI
	or NAND
In-Reply-To: <1302818981-28270-1-git-send-email-twarren@nvidia.com>
References: <1302818981-28270-1-git-send-email-twarren@nvidia.com>
Message-ID: <4DAE7595.2060305@aribaud.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Tom,

Le 15/04/2011 00:09, Tom Warren a ?crit :
> This series of patches fixes a hang seen when loading U-Boot from SPI
> or NAND on Seaboard and Harmony due to a missing PLLX init. It also
> corrects a UARTD bit error in clk_rst.h, and adds rudimentary GPIO
> support so that the UART on Seaboard can be used by U-Boot (UARTD&
> SPIFLASH are muxed, and the default POR setting is for SPI access, so
> GPIO_PI3 has to be driven low to enable serial console I/O over UARTD).
> Harmony has no SPIFLASH, so the issue doesn't exist there.
>
> With these changes, I can write U-Boot to SPI on Seaboard and boot with
> it to the U-Boot cmd prompt. This should also apply to loading from NAND
> on Seaboard and Harmony - testing to follow.
>
> Changes in V2:
> 	- Change 2nd patch's description to 'Add basic GPIO definitions'
> 	- Add more descriptive comment for CPCON use in init_pllx
>
> Tom Warren (3):
>    arm: Tegra2: Add missing PLLX init
>    arm: Tegra2: GPIO: Add basic GPIO definitions
>    arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init
>
>   arch/arm/cpu/armv7/tegra2/ap20.c           |   29 ++++++++++++++
>   arch/arm/include/asm/arch-tegra2/clk_rst.h |    6 ++-
>   arch/arm/include/asm/arch-tegra2/gpio.h    |   59 ++++++++++++++++++++++++++++
>   arch/arm/include/asm/arch-tegra2/tegra2.h  |    1 +
>   board/nvidia/common/board.c                |   32 ++++++++++-----
>   board/nvidia/common/board.h                |    4 ++
>   board/nvidia/harmony/Makefile              |    1 +
>   board/nvidia/harmony/harmony.c             |   34 ++++++++++++++++
>   board/nvidia/seaboard/Makefile             |    1 +
>   board/nvidia/seaboard/seaboard.c           |   52 ++++++++++++++++++++++++
>   10 files changed, 206 insertions(+), 13 deletions(-)
>   create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h
>   create mode 100644 board/nvidia/harmony/harmony.c
>   create mode 100644 board/nvidia/seaboard/seaboard.c

Applied to u-boot-arm, thanks.

Amicalement,
-- 
Albert.