[U-Boot] [PATCH V7 2/3] PMIC: Add dialog pmic support

[Stefano Babic <sbabic@denx.de>]

On 05/13/2011 10:41 AM, Jason Liu wrote:

>> The patch adds several functions that are strictly related to the
>> processor and I am checking with the reference manuals to understand
>> them. I need more time for it.
> 
> If that, can we consider that I just add the basic mx53loco support:
> which exclude:
> 
> Dialog PMIC support, which is just useful to increase the CPU to 1GHZ,
> by default voltage,
> CPU can only run up to 800MHZ,
> 
> clock code(patch 1/3) , which is just useful to increase DDR run up to
> 400Mhz, by default it's 333Mhz.
> 
> I just don't want to break the basic mx53loco board support to
> mainline for so-long time.
> 
> Please advise, thanks,

If you prefer to proceed in this way, no problem at all, we can do it.
You can add support for clock/dialog later. In the meantime I will send
to you my feedback for the clock patch.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================