* [U-Boot] Write error on fsl_esdhc driver
@ 2011-05-13 12:35 Fabio Estevam
2011-05-13 13:21 ` Stefano Babic
0 siblings, 1 reply; 3+ messages in thread
From: Fabio Estevam @ 2011-05-13 12:35 UTC (permalink / raw)
To: u-boot
Hi,
When trying to save environment variables into a SD card on MX51 and
MX53 boards I am getting the following error:
MX51EVK U-Boot > set ipaddr 192.168.1.1
MX51EVK U-Boot > save
Saving Environment to MMC...
Writing to MMC(0)... MMC: block number 0x6be604 exceeds max(0x3aa000)
failed
I will start debugging it, but just wanted to know if this was
something already known/reported.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] Write error on fsl_esdhc driver
2011-05-13 12:35 [U-Boot] Write error on fsl_esdhc driver Fabio Estevam
@ 2011-05-13 13:21 ` Stefano Babic
2011-05-14 12:54 ` Fabio Estevam
0 siblings, 1 reply; 3+ messages in thread
From: Stefano Babic @ 2011-05-13 13:21 UTC (permalink / raw)
To: u-boot
On 05/13/2011 02:35 PM, Fabio Estevam wrote:
> Hi,
>
Hi Fbio,
> When trying to save environment variables into a SD card on MX51 and
> MX53 boards I am getting the following error:
>
> MX51EVK U-Boot > set ipaddr 192.168.1.1
> MX51EVK U-Boot > save
> Saving Environment to MMC...
> Writing to MMC(0)... MMC: block number 0x6be604 exceeds max(0x3aa000)
> failed
>
> I will start debugging it, but just wanted to know if this was
> something already known/reported.
No, I have not (yet) seen. Was the SD card correctly recognized ?
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] Write error on fsl_esdhc driver
2011-05-13 13:21 ` Stefano Babic
@ 2011-05-14 12:54 ` Fabio Estevam
0 siblings, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2011-05-14 12:54 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Fri, May 13, 2011 at 10:21 AM, Stefano Babic <sbabic@denx.de> wrote:
> On 05/13/2011 02:35 PM, Fabio Estevam wrote:
>> Hi,
>>
> Hi Fbio,
>
>> When trying to save environment variables into a SD card on MX51 and
>> MX53 boards I am getting the following error:
>>
>> MX51EVK U-Boot > set ipaddr 192.168.1.1
>> MX51EVK U-Boot > save
>> Saving Environment to MMC...
>> Writing to MMC(0)... MMC: block number 0x6be604 exceeds max(0x3aa000)
>> failed
>>
>> I will start debugging it, but just wanted to know if this was
>> something already known/reported.
>
> No, I have not (yet) seen. Was the SD card correctly recognized ?
Right after boot I also get the same error:
MMC: FSL_ESDHC: 0
MMC: block number 0x6be604 exceeds max(0x3aa000)
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-14 12:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-13 12:35 [U-Boot] Write error on fsl_esdhc driver Fabio Estevam
2011-05-13 13:21 ` Stefano Babic
2011-05-14 12:54 ` Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox