public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Luca Ceresoli <luca.ceresoli@comelit.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"
Date: Mon, 16 May 2011 22:35:03 +0200	[thread overview]
Message-ID: <4DD18A77.1060508@comelit.it> (raw)
In-Reply-To: <4DADAA50.1040008@comelit.it>

Luca Ceresoli wrote:
> Il 19/04/2011 16:18, Detlev Zundel ha scritto:
>> Hi Luca,
>>
>>> With the upcoming TFTP server implementation, the remote node can be
>>> either a client or a server, so avoid ambiguities.
>>>
>>> Signed-off-by: Luca Ceresoli<luca.ceresoli@comelit.it>
>>> Cc: Wolfgang Denk<wd@denx.de>
>>> ---
>>> Changes in v2:
>>>   - fixed checkpatch issues.
>>>
>>>   net/tftp.c |   42 +++++++++++++++++++++---------------------
>>>   1 files changed, 21 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/net/tftp.c b/net/tftp.c
>>> index 00abec3..da545c6 100644
>>> --- a/net/tftp.c
>>> +++ b/net/tftp.c
>>> @@ -55,18 +55,18 @@ enum {
>>>       TFTP_ERR_FILE_ALREADY_EXISTS = 6,
>>>   };
>>>
>>> -static IPaddr_t TftpServerIP;
>>> -static int    TftpServerPort;        /* The UDP port at their 
>>> end        */
>>> -static int    TftpOurPort;        /* The UDP port at our end        */
>>> +static IPaddr_t TftpRemoteIP;
>>> +static int    TftpRemotePort;    /* The UDP port at their 
>>> end        */
>>> +static int    TftpOurPort;    /* The UDP port at our end        */
>>>   static int    TftpTimeoutCount;
>>> -static ulong    TftpBlock;        /* packet sequence number        */
>>> -static ulong    TftpLastBlock;        /* last packet sequence 
>>> number received */
>>> -static ulong    TftpBlockWrap;        /* count of sequence number 
>>> wraparounds */
>>> -static ulong    TftpBlockWrapOffset;    /* memory offset due to 
>>> wrapping    */
>>> +static ulong    TftpBlock;    /* packet sequence number        */
>>> +static ulong    TftpLastBlock;    /* last packet sequence number 
>>> received */
>>> +static ulong    TftpBlockWrap;    /* count of sequence number 
>>> wraparounds */
>>> +static ulong    TftpBlockWrapOffset; /* memory offset due to 
>>> wrapping    */
>> These changes are indentation only changes, so they should be in a
>> separate patch.
>
> It's needed for checkpatch compliance.
>
>
>>>   static int    TftpState;
>>>   #ifdef CONFIG_TFTP_TSIZE
>>> -static int    TftpTsize;        /* The file size reported by the 
>>> server */
>>> -static short    TftpNumchars;        /* The number of hashes we 
>>> printed      */
>>> +static int    TftpTsize;    /* The file size reported by the server */
>>> +static short    TftpNumchars;    /* The number of hashes we 
>>> printed      */
>> dito.
>>
>> [...]
>>
>>> @@ -421,7 +421,7 @@ TftpHandler(uchar *pkt, unsigned dest, IPaddr_t 
>>> sip, unsigned src,
>>>
>>>           /*
>>>            *    Acknoledge the block just received, which will prompt
>>> -         *    the server for the next one.
>>> +         *    the remote for the next one.
>> Hey, while you're at it, please fix the "Acknoledge" typo ;)
>
> Will do.

Done for v3.

I removed the checkpatch-related changes: they are now on the tftp 
cleanup patch series that I submitted on saturday, and on top of which 
v3 of the TFTP server will be based.

Luca

  parent reply	other threads:[~2011-05-16 20:35 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-13  9:08 [U-Boot] [RFC] Act as a TFTP server Luca Ceresoli
2011-04-13 11:37 ` Wolfgang Denk
2011-04-13 12:47   ` Luca Ceresoli
2011-04-30 19:53     ` Wolfgang Denk
2011-05-03 12:23       ` Luca Ceresoli
2011-05-03 12:36         ` Wolfgang Denk
2011-05-16 20:57           ` Luca Ceresoli
2011-04-14 10:31 ` Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 0/6] " Luca Ceresoli
2011-04-14 16:13   ` Albert ARIBAUD
2011-04-18 16:19   ` [U-Boot] [PATCH v2 " Luca Ceresoli
2011-04-19 14:05     ` Detlev Zundel
2011-05-17 10:03     ` [U-Boot] [PATCH v3 0/5] " Luca Ceresoli
2011-05-17 10:03     ` [U-Boot] [PATCH v3 1/5] TFTP: replace "server" with "remote" in local variable names Luca Ceresoli
2011-05-19  8:11       ` Detlev Zundel
2011-05-19 19:39       ` Wolfgang Denk
2011-05-17 10:03     ` [U-Boot] [PATCH v3 2/5] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-05-19  8:12       ` Detlev Zundel
2011-05-19 19:39       ` Wolfgang Denk
2011-05-17 10:03     ` [U-Boot] [PATCH v3 3/5] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-05-19  8:13       ` Detlev Zundel
2011-05-19 19:48       ` Wolfgang Denk
2011-05-17 10:03     ` [U-Boot] [PATCH v3 4/5] TFTP: add tftpsrv command Luca Ceresoli
2011-05-19  8:12       ` Detlev Zundel
2011-05-19 19:48       ` Wolfgang Denk
2011-05-17 10:03     ` [U-Boot] [PATCH v3 5/5] net/tftp.c: fix typo Luca Ceresoli
2011-05-19  8:13       ` Detlev Zundel
2011-05-19 19:48       ` Wolfgang Denk
2011-04-18 16:19   ` [U-Boot] [PATCH v2 1/6] README: remove spurious line Luca Ceresoli
2011-04-19 14:07     ` Detlev Zundel
2011-04-18 16:19   ` [U-Boot] [PATCH v2 2/6] NET: pass source IP address to packet handlers Luca Ceresoli
2011-04-19 14:15     ` Detlev Zundel
2011-04-19 15:26       ` Luca Ceresoli
2011-05-12 17:38     ` Wolfgang Denk
2011-04-18 16:19   ` [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote" Luca Ceresoli
2011-04-19 14:18     ` Detlev Zundel
2011-04-19 15:29       ` Luca Ceresoli
2011-04-19 16:28         ` Detlev Zundel
2011-04-19 21:56           ` Luca Ceresoli
2011-04-20  8:17             ` Detlev Zundel
2011-05-04  7:58               ` Luca Ceresoli
2011-05-04 10:37                 ` Detlev Zundel
2011-04-20  8:41         ` Detlev Zundel
2011-04-20 10:55           ` Luca Ceresoli
2011-04-20 13:27             ` [U-Boot] checkpatch - theory and practice [was: [PATCH v2 3/6] TFTP: rename "server" to "remote"] Detlev Zundel
2011-05-16 20:35         ` Luca Ceresoli [this message]
2011-05-17  9:38           ` [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote" Detlev Zundel
2011-04-30  4:36     ` Mike Frysinger
2011-05-16 20:16       ` Luca Ceresoli
2011-05-12 17:46     ` Wolfgang Denk
2011-05-13  7:36       ` Luca Ceresoli
2011-05-14 16:07         ` Luca Ceresoli
2011-04-18 16:19   ` [U-Boot] [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-04-19 14:22     ` Detlev Zundel
2011-04-18 16:19   ` [U-Boot] [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-04-19 14:37     ` Detlev Zundel
2011-05-17  8:06       ` Luca Ceresoli
2011-05-17  9:41         ` Detlev Zundel
2011-04-18 16:19   ` [U-Boot] [PATCH v2 6/6] TFTP: add tftpsrv command Luca Ceresoli
2011-04-19 14:39     ` Detlev Zundel
2011-04-30  4:32     ` Mike Frysinger
2011-05-04  7:02     ` Mike Frysinger
2011-04-14 15:52 ` [U-Boot] [PATCH 1/6] README: remove spurious line Luca Ceresoli
2011-04-30 20:19   ` Wolfgang Denk
2011-04-14 15:52 ` [U-Boot] [PATCH 2/6] NET: pass source IP address to packet handlers Luca Ceresoli
2011-04-30 20:22   ` Wolfgang Denk
2011-04-30 20:24   ` Wolfgang Denk
2011-05-03  8:54     ` Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 3/6] TFTP: rename "server" to "remote" Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 5/6] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 6/6] TFTP: add tftpsrv command Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DD18A77.1060508@comelit.it \
    --to=luca.ceresoli@comelit.it \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox