From: Luca Ceresoli <luca.ceresoli@comelit.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC] Act as a TFTP server
Date: Mon, 16 May 2011 22:57:41 +0200 [thread overview]
Message-ID: <4DD18FC5.3070601@comelit.it> (raw)
In-Reply-To: <20110503123622.DE256126DAF@gemini.denx.de>
Wolfgang Denk wrote:
> Dear Luca Ceresoli,
>
> In message<4DBFF3AF.4040505@comelit.it> you wrote:
>>> So assuming we never see any incoming packets - how long will we wait?
>> Once it has started, the server is stopped like the client is:
>> - on a complete file reception
>> - pressing Ctrl-C
>> - after waiting 5 seconds for 10 times.
> OK, fine. Can you please document thisn, then. Thanks.
Incorporating also Mike's suggestion for the one-line help, I propose this:
U_BOOT_CMD(
tftpsrv, 2, 1, do_tftpsrv,
"act as a TFTP server and boot the first received file",
"[loadAddress]\n"
"Listen for an incoming TFTP transfer, receive a file and boot it.\n"
"The transfer is aborted if a transfer has not been started after\n"
"about 50 seconds or if Ctrl-C is pressed."
);
Comments?
Luca
next prev parent reply other threads:[~2011-05-16 20:57 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 9:08 [U-Boot] [RFC] Act as a TFTP server Luca Ceresoli
2011-04-13 11:37 ` Wolfgang Denk
2011-04-13 12:47 ` Luca Ceresoli
2011-04-30 19:53 ` Wolfgang Denk
2011-05-03 12:23 ` Luca Ceresoli
2011-05-03 12:36 ` Wolfgang Denk
2011-05-16 20:57 ` Luca Ceresoli [this message]
2011-04-14 10:31 ` Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 0/6] " Luca Ceresoli
2011-04-14 16:13 ` Albert ARIBAUD
2011-04-18 16:19 ` [U-Boot] [PATCH v2 " Luca Ceresoli
2011-04-19 14:05 ` Detlev Zundel
2011-05-17 10:03 ` [U-Boot] [PATCH v3 0/5] " Luca Ceresoli
2011-05-17 10:03 ` [U-Boot] [PATCH v3 1/5] TFTP: replace "server" with "remote" in local variable names Luca Ceresoli
2011-05-19 8:11 ` Detlev Zundel
2011-05-19 19:39 ` Wolfgang Denk
2011-05-17 10:03 ` [U-Boot] [PATCH v3 2/5] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-05-19 8:12 ` Detlev Zundel
2011-05-19 19:39 ` Wolfgang Denk
2011-05-17 10:03 ` [U-Boot] [PATCH v3 3/5] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-05-19 8:13 ` Detlev Zundel
2011-05-19 19:48 ` Wolfgang Denk
2011-05-17 10:03 ` [U-Boot] [PATCH v3 4/5] TFTP: add tftpsrv command Luca Ceresoli
2011-05-19 8:12 ` Detlev Zundel
2011-05-19 19:48 ` Wolfgang Denk
2011-05-17 10:03 ` [U-Boot] [PATCH v3 5/5] net/tftp.c: fix typo Luca Ceresoli
2011-05-19 8:13 ` Detlev Zundel
2011-05-19 19:48 ` Wolfgang Denk
2011-04-18 16:19 ` [U-Boot] [PATCH v2 1/6] README: remove spurious line Luca Ceresoli
2011-04-19 14:07 ` Detlev Zundel
2011-04-18 16:19 ` [U-Boot] [PATCH v2 2/6] NET: pass source IP address to packet handlers Luca Ceresoli
2011-04-19 14:15 ` Detlev Zundel
2011-04-19 15:26 ` Luca Ceresoli
2011-05-12 17:38 ` Wolfgang Denk
2011-04-18 16:19 ` [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote" Luca Ceresoli
2011-04-19 14:18 ` Detlev Zundel
2011-04-19 15:29 ` Luca Ceresoli
2011-04-19 16:28 ` Detlev Zundel
2011-04-19 21:56 ` Luca Ceresoli
2011-04-20 8:17 ` Detlev Zundel
2011-05-04 7:58 ` Luca Ceresoli
2011-05-04 10:37 ` Detlev Zundel
2011-04-20 8:41 ` Detlev Zundel
2011-04-20 10:55 ` Luca Ceresoli
2011-04-20 13:27 ` [U-Boot] checkpatch - theory and practice [was: [PATCH v2 3/6] TFTP: rename "server" to "remote"] Detlev Zundel
2011-05-16 20:35 ` [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote" Luca Ceresoli
2011-05-17 9:38 ` Detlev Zundel
2011-04-30 4:36 ` Mike Frysinger
2011-05-16 20:16 ` Luca Ceresoli
2011-05-12 17:46 ` Wolfgang Denk
2011-05-13 7:36 ` Luca Ceresoli
2011-05-14 16:07 ` Luca Ceresoli
2011-04-18 16:19 ` [U-Boot] [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-04-19 14:22 ` Detlev Zundel
2011-04-18 16:19 ` [U-Boot] [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-04-19 14:37 ` Detlev Zundel
2011-05-17 8:06 ` Luca Ceresoli
2011-05-17 9:41 ` Detlev Zundel
2011-04-18 16:19 ` [U-Boot] [PATCH v2 6/6] TFTP: add tftpsrv command Luca Ceresoli
2011-04-19 14:39 ` Detlev Zundel
2011-04-30 4:32 ` Mike Frysinger
2011-05-04 7:02 ` Mike Frysinger
2011-04-14 15:52 ` [U-Boot] [PATCH 1/6] README: remove spurious line Luca Ceresoli
2011-04-30 20:19 ` Wolfgang Denk
2011-04-14 15:52 ` [U-Boot] [PATCH 2/6] NET: pass source IP address to packet handlers Luca Ceresoli
2011-04-30 20:22 ` Wolfgang Denk
2011-04-30 20:24 ` Wolfgang Denk
2011-05-03 8:54 ` Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 3/6] TFTP: rename "server" to "remote" Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 5/6] TFTP: net/tftp.c: add server mode receive Luca Ceresoli
2011-04-14 15:52 ` [U-Boot] [PATCH 6/6] TFTP: add tftpsrv command Luca Ceresoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD18FC5.3070601@comelit.it \
--to=luca.ceresoli@comelit.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox