From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Tue, 17 May 2011 15:12:52 +0200
Subject: [U-Boot] [PATCH v2 1/3] MX5: Make the weim structure complete
In-Reply-To: <4DD270F4.90204@freescale.com>
References: <1305584991-13040-1-git-send-email-fabio.estevam@freescale.com>
	<BANLkTik-MU2bUxKTpW+jp9NyjOnkx1wu9w@mail.gmail.com>
	<4DD26DCA.606@denx.de> <4DD270F4.90204@freescale.com>
Message-ID: <4DD27454.8040008@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 05/17/2011 02:58 PM, Fabio Estevam wrote:
> I think what Jason mentions is the fact that I added:
> #define CS1_BASE_ADDR   0xF4000000 and this was only for MX53 because it is protected by
> "elif defined(CONFIG_MX53)"

Ah ok, agree.

> 
> I can add the CS1_BASE_ADDR for MX51 as well on my v3 series.
> 
> The weim layout registers are the same for MX51 and MX53.

Yes, they are.


Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================