From: Valentin Longchamp <valentin.longchamp@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/8] keymile arm boards update, part 2
Date: Tue, 17 May 2011 16:53:08 +0200 [thread overview]
Message-ID: <4DD28BD4.90309@keymile.com> (raw)
In-Reply-To: <F766E4F80769BD478052FB6533FA745D19FAC96428@SC-VEXCH4.marvell.com>
Hi Prafulla,
Prafulla Wadaskar wrote:
>
>> -----Original Message-----
>> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
>> Sent: Wednesday, May 11, 2011 8:52 PM
>> To: Prafulla Wadaskar
>> Cc: u-boot at lists.denx.de; holger.brunck at keymile.com
>> Subject: Re: [PATCH v3 0/8] keymile arm boards update, part 2
>>
>> Hi Prafulla,
>>
>> Valentin Longchamp wrote:
>>> This series is the second effort of merging the Keymile boards support
>>> back into mainline.
>>>
>>> This series is a subset of the first patch series:
>>> http://lists.denx.de/pipermail/u-boot/2011-April/090013.html
>>> The first large series was split up to three independent series, which
>>> are easier to review and apply for the custodians.
>>>
>>> This series adds the km_arm specific parts of the series. All its
>> changes
>>> concern our marvell based boards and that's why it should go through
>> the
>>> u-boot-marvell git tree.
>>>
>>> Changes for v3: taken Prafulla's comments into account
>> I have posted those one week ago, and I was wondering if you would be
>> able to review/take them in you tree soon ?
>
> Yes Valentin
> I will review them in this week, sorry for delay.
>
Thank you for the review. I guess now the series is ready go into mainline.
With -rc1 to be freezed very soon, we really would like to see it getting pushed before this freeze. This series is the last remaining part of our effort to rationalize our code base for the Keymile boards and integrate it into mainline and thus it would help us for our current/future developments that this series goes as well to mainline for the current approaching release.
Best Regards
--
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________
KEYMILE AG
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318
Fax +41 31 377 1212
valentin.longchamp at keymile.com
www.keymile.com
______________________________________
KEYMILE: A Specialist as a Partner
next prev parent reply other threads:[~2011-05-17 14:53 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-04 15:53 [U-Boot] [PATCH v3 0/8] keymile arm boards update, part 2 Valentin Longchamp
2011-05-04 15:53 ` [U-Boot] [PATCH v3 1/8] arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h Valentin Longchamp
2011-05-12 10:45 ` Prafulla Wadaskar
2011-05-04 15:53 ` [U-Boot] [PATCH v3 2/8] arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file Valentin Longchamp
2011-05-12 10:41 ` Prafulla Wadaskar
2011-05-04 15:53 ` [U-Boot] [PATCH v3 3/8] arm/km: introduce bootcount env variable and clean km_arm Valentin Longchamp
2011-05-12 10:46 ` Prafulla Wadaskar
2011-05-04 15:53 ` [U-Boot] [PATCH v3 4/8] arm/km: disable ls (through jffs2 support) Valentin Longchamp
2011-05-04 15:53 ` [U-Boot] [PATCH v3 5/8] arm/km: add second serial interface for kirkwood Valentin Longchamp
2011-05-12 11:02 ` Prafulla Wadaskar
2011-05-04 15:53 ` [U-Boot] [PATCH v3 6/8] arm/km: rename mgcoge2un to mgcoge3un Valentin Longchamp
2011-05-12 11:01 ` Prafulla Wadaskar
2011-05-04 15:53 ` [U-Boot] [PATCH v3 7/8] mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE Valentin Longchamp
2011-05-04 15:53 ` [U-Boot] [PATCH v3 8/8] arm/km: update mgcoge3un board support Valentin Longchamp
2011-05-12 11:01 ` Prafulla Wadaskar
2011-05-13 14:12 ` Holger Brunck
2011-05-13 18:34 ` Wolfgang Denk
2011-05-11 15:21 ` [U-Boot] [PATCH v3 0/8] keymile arm boards update, part 2 Valentin Longchamp
2011-05-12 8:58 ` Prafulla Wadaskar
2011-05-17 14:53 ` Valentin Longchamp [this message]
2011-05-20 11:54 ` Valentin Longchamp
2011-05-20 13:05 ` Wolfgang Denk
2011-05-20 15:06 ` Prafulla Wadaskar
2011-05-26 13:36 ` Valentin Longchamp
2011-05-30 16:00 ` Holger Brunck
2011-05-30 19:24 ` Wolfgang Denk
2011-05-30 19:49 ` Albert ARIBAUD
2011-05-30 19:57 ` Albert ARIBAUD
2011-05-30 20:15 ` Albert ARIBAUD
2011-05-31 11:49 ` Albert ARIBAUD
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase " Valentin Longchamp
2011-05-31 17:49 ` Albert ARIBAUD
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 1/8] arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 2/8] arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 3/8] arm/km: introduce bootcount env variable and clean km_arm Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 4/8] arm/km: disable ls (through jffs2 support) Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 5/8] arm/km: add second serial interface for kirkwood Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 6/8] arm/km: rename mgcoge2un to mgcoge3un Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 7/8] mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE Valentin Longchamp
2011-05-31 12:12 ` [U-Boot] [PATCH v3 rebase 8/8] arm/km: update mgcoge3un board support Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD28BD4.90309@keymile.com \
--to=valentin.longchamp@keymile.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox