[U-Boot] [PATCH v3 3/4] MX5: Introduce a function for setting the chip select size

[Stefano Babic <sbabic@denx.de>]

On 05/19/2011 01:49 PM, Fabio Estevam wrote:
> Hi Stefano,
> 

Hi Fabio,

>>
>> mmmhhh...it seems to me not complete, because not all combinations are
>> covered.
> 
> Yes, it is complete. Only these four combinations are allowed as per
> the MX53 Reference Manual.
> 
>> And setting fixed values in the switch constraints us to have
>> very long defines, as CS0_32M_CS1_32M_CS2_32M_CS3_32M.
> 
> I can change the very long defines if you want.
> 
> I thought initially on doing the generic function as you described,
> but then we would need to check for only the 4 valid combinations.
> Then I came with this implementation that only handle the 4 possible
> cases.

I made the same mistake and I was convinced that all combinations are
possible. I understand why you changed in this way and I agree with this
implementation, thanks for clarification.

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================