[U-Boot] [PATCH 2/2] mx53smd: Configure two banks of DDR

[Stefano Babic <sbabic@denx.de>]

On 05/19/2011 03:44 PM, Fabio Estevam wrote:
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  board/freescale/mx53smd/mx53smd.c |   18 +++++++++++++++---
>  include/configs/mx53smd.h         |    3 +++
>  2 files changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
> index 2d158f7..f3c433f 100644
> --- a/board/freescale/mx53smd/mx53smd.c
> +++ b/board/freescale/mx53smd/mx53smd.c
> @@ -42,11 +42,23 @@ u32 get_board_rev(void)
>  
>  int dram_init(void)
>  {
> -	/* dram_init must store complete ramsize in gd->ram_size */
> -	gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
> -				PHYS_SDRAM_1_SIZE);
> +	u32 size1, size2;
> +
> +	size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
> +	size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
> +
> +	gd->ram_size = size1 + size2;
> +
>  	return 0;

mmmhhh...I merged your first patch on this board, but I have not yet
request a pull to u-boot arm. These two patches solved two problems with
the first patch. What do you think if I squash all three patches together ?

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================