From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 19 May 2011 17:03:03 +0200 Subject: [U-Boot] [PATCH 2/2] mx53smd: Configure two banks of DDR In-Reply-To: <1305812698-3955-2-git-send-email-fabio.estevam@freescale.com> References: <1305812698-3955-1-git-send-email-fabio.estevam@freescale.com> <1305812698-3955-2-git-send-email-fabio.estevam@freescale.com> Message-ID: <4DD53127.9050304@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/19/2011 03:44 PM, Fabio Estevam wrote: > Signed-off-by: Fabio Estevam > --- > board/freescale/mx53smd/mx53smd.c | 18 +++++++++++++++--- > include/configs/mx53smd.h | 3 +++ > 2 files changed, 18 insertions(+), 3 deletions(-) > > diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c > index 2d158f7..f3c433f 100644 > --- a/board/freescale/mx53smd/mx53smd.c > +++ b/board/freescale/mx53smd/mx53smd.c > @@ -42,11 +42,23 @@ u32 get_board_rev(void) > > int dram_init(void) > { > - /* dram_init must store complete ramsize in gd->ram_size */ > - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, > - PHYS_SDRAM_1_SIZE); > + u32 size1, size2; > + > + size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); > + size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); > + > + gd->ram_size = size1 + size2; > + > return 0; mmmhhh...I merged your first patch on this board, but I have not yet request a pull to u-boot arm. These two patches solved two problems with the first patch. What do you think if I squash all three patches together ? Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================