[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

please pull from u-boot-imx.

The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:

  Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)

are available in the git repository at:
  git://www.denx.de/git/u-boot-imx.git master

Fabio Estevam (6):
      mx31pdk: Clean up mx31pdk.h file
      MX53: Add initial support for MX53SMD board.
      MX51: vision: Let video mode struct be independant of watchdog.
      MX51: vision2: Fix build for vision2 board.
      MX53: Handle silicon revision 2.1 case
      MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.

Jason Liu (2):
      MX53: support for freescale MX53LOCO board
      mx5: board: code clean up for checkboard code

Shawn Guo (2):
      mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
      mx5: Fix CONFIG_OF_LIBFDT redefined warning

Stefano Babic (3):
      MX31: Make get_reset_cause() static and drop unreachable code
      MX5: drop config.mk from efikamx board
      MX31: drop warnings due to missing prototype for mxc_watchdog_reset()

 MAINTAINERS                                        |    2 +
 arch/arm/cpu/arm1136/mx31/generic.c                |    6 +-
 arch/arm/cpu/armv7/mx5/soc.c                       |   10 +-
 arch/arm/include/asm/arch-mx31/clock.h             |    1 +
 board/efikamx/efikamx.c                            |   42 +---
 board/freescale/mx51evk/mx51evk.c                  |   36 +---
 board/freescale/mx53evk/mx53evk.c                  |   21 +--
 .../config.mk => freescale/mx53loco/Makefile}      |   36 ++-
 board/freescale/mx53loco/imximage.cfg              |   96 ++++++
 board/freescale/mx53loco/mx53loco.c                |  302
++++++++++++++++++++
 .../config.mk => freescale/mx53smd/Makefile}       |   35 ++-
 board/freescale/mx53smd/imximage.cfg               |   96 ++++++
 board/freescale/mx53smd/mx53smd.c                  |  229 +++++++++++++++
 board/ttcontrol/vision2/vision2.c                  |   47 +---
 boards.cfg                                         |    6 +-
 include/configs/mx31pdk.h                          |   32 +-
 include/configs/mx51evk.h                          |    3 -
 include/configs/mx53evk.h                          |    3 -
 include/configs/mx53loco.h                         |  185 ++++++++++++
 include/configs/mx53smd.h                          |  191 ++++++++++++
 include/configs/vision2.h                          |    1 +
 21 files changed, 1191 insertions(+), 189 deletions(-)
 rename board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
 create mode 100644 board/freescale/mx53loco/imximage.cfg
 create mode 100644 board/freescale/mx53loco/mx53loco.c
 rename board/{ttcontrol/vision2/config.mk =>
freescale/mx53smd/Makefile} (50%)
 create mode 100644 board/freescale/mx53smd/imximage.cfg
 create mode 100644 board/freescale/mx53smd/mx53smd.c
 create mode 100644 include/configs/mx53loco.h
 create mode 100644 include/configs/mx53smd.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================