[U-Boot] [IXP42x PATCH series v4 04/17] Fix IXP code to work after relocation was added

[Michael Schwingen <rincewind@discworld.dascon.de>]

Am 05/21/2011 01:58 AM, schrieb Marek Vasut:
>
>> -int timer_init (void)
>> +unsigned long long get_ticks(void)
>>  {
>> -	/* install interrupt handler for timer */
>> -	irq_install_handler(IXP425_TIMER_2_IRQ, timer_isr, (void *)&timestamp);
>> -
>> -	/* setup the Timer counter value */
>> -	*IXP425_OSRT2 = (LATCH & ~IXP425_OST_RELOAD_MASK) | IXP425_OST_ENABLE;
>> +	ulong now = *IXP425_OSTS_B;
> Aren't you missing an IO accessor here ?
Oops - you are correct.


>> diff --git a/arch/arm/include/asm/arch-ixp/ixp425.h
>> b/arch/arm/include/asm/arch-ixp/ixp425.h index 2114437..5132607 100644
>> --- a/arch/arm/include/asm/arch-ixp/ixp425.h
>> +++ b/arch/arm/include/asm/arch-ixp/ixp425.h
>> @@ -391,9 +391,8 @@
>>  #define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
>>  #endif
>>
>> -#if 0 /* test-only: also defined in npe/include/... */
>> -#define IXP425_OSTS	IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
>> -#endif
>> +/* _B to avoid collision: also defined in npe/include/... */
>> +#define IXP425_OSTS_B	IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
>>  #define IXP425_OST1	IXP425_TIMER_REG(IXP425_OST1_OFFSET)
>>  #define IXP425_OSRT1	IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
>>  #define IXP425_OST2	IXP425_TIMER_REG(IXP425_OST2_OFFSET)
> This will eventually enjoy being converted to struct ixp_timer_regset { ... } 
> goo. If you already did it in some further patch, sorry, I didn't get there yet 
> ;-)
That would probably require a major rework of all the Intel access/NPE
library code - this is not something I want to touch now.
Most of these defines are used inside the Intel code, so cleaning up
only outside of that area would not improve the code much.

cu
Michael