From: Graeme Russ <graeme.russ@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC][Timer API] Revised Specification - Implementation details
Date: Sat, 28 May 2011 10:32:27 +1000 [thread overview]
Message-ID: <4DE0429B.5070409@gmail.com> (raw)
In-Reply-To: <4DDFC820.80302@comcast.net>
On 28/05/11 01:49, J. William Campbell wrote:
> On 5/26/2011 11:54 PM, Graeme Russ wrote:
>> On Fri, May 27, 2011 at 4:33 PM, J. William Campbell
>> <jwilliamcampbell@comcast.net> wrote:
>>> On 5/26/2011 9:33 PM, Graeme Russ wrote:
>>>> Hi Bill,
>>>>
>>> <snip>
>> [massive snip]
[another big snip]
>>>>>> I just realised - the ISR _does not need to call the sync_timebase at
>>>>>> all_
>>>>>> The ISR only needs to call get_ticks(), so it will be fast anyway
>>>>> The problem is that the way we previously detected wrapping does not work
>>>>> if
>>>>> the interrupt rate is == to the counter wrap time, which it essentially
>>>>> always is. If get_ticks is trying to update the wrap count when an
>>>>> interrupt
>>>> Is it, always, on every platform?
>>> Yes, pretty much. You get a terminal count/counter underflow interrupt and
>>> that is it.
>> Not on sc520 - The micro/millisecond counter cannot be used to driver an
>> interrupt - you need to setup a seperate timer. I think the x86 internal
>> performance counters are the same
> What is true, as you have stated, is that the micro/millisecond counter on
> the sc520 does not interrupt at all. Nor do the x86 performance counters.
> The x86 performance counters are a non-problem because they are 64 bits
> long. We don't need interrupts for them. Now, if you choose to use the
> sc520 micro/millisecond counter, then you need another source of
> interrupts. Due to the fact that reading the sc520 counter resets it, we
> must accumulate the elapsed time in software. That means the interrupt
> routine must do a bit more work, but it also allows reading the counters in
I had planned to do _all_ of that in get_ticks(), so all the complicated
code is in one spot which is called by sync_ms_timer() which is in turned
called by either timer_isr() or get_timer()
Of course the problem we have now identified is reentrancy - Looking
forward to seeing your solution
Regards,
Graeme
next prev parent reply other threads:[~2011-05-28 0:32 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-26 13:27 [U-Boot] [RFC][Timer API] Revised Specification - Implementation details Graeme Russ
2011-05-26 15:57 ` Simon Glass
2011-05-26 17:28 ` Wolfgang Denk
2011-05-26 22:44 ` Graeme Russ
2011-05-27 5:23 ` Simon Glass
2011-05-27 7:40 ` Wolfgang Denk
2011-05-27 14:46 ` Simon Glass
2011-05-26 16:56 ` J. William Campbell
2011-05-26 17:53 ` Wolfgang Denk
2011-05-26 18:52 ` J. William Campbell
2011-05-26 19:16 ` Wolfgang Denk
2011-05-26 19:54 ` J. William Campbell
2011-05-26 20:27 ` Wolfgang Denk
2011-05-26 20:39 ` J. William Campbell
2011-05-26 22:59 ` Graeme Russ
2011-05-26 23:28 ` Graeme Russ
2011-05-27 1:26 ` J. William Campbell
2011-05-27 1:51 ` Graeme Russ
2011-05-27 3:54 ` J. William Campbell
2011-05-27 4:33 ` Graeme Russ
2011-05-27 6:33 ` J. William Campbell
2011-05-27 6:54 ` Graeme Russ
2011-05-27 15:49 ` J. William Campbell
2011-05-28 0:32 ` Graeme Russ [this message]
2011-05-27 7:33 ` Wolfgang Denk
2011-05-27 14:16 ` J. William Campbell
2011-05-27 7:28 ` Wolfgang Denk
2011-05-27 14:04 ` J. William Campbell
2011-05-27 7:13 ` Wolfgang Denk
2011-05-27 7:35 ` Graeme Russ
2011-05-27 7:48 ` Wolfgang Denk
2011-05-27 7:57 ` Graeme Russ
2011-05-27 8:01 ` Graeme Russ
2011-05-27 11:27 ` Wolfgang Denk
2011-05-27 12:43 ` Graeme Russ
2011-05-27 13:07 ` Scott McNutt
2011-05-27 15:00 ` J. William Campbell
2011-05-27 15:13 ` Simon Glass
2011-05-27 17:11 ` J. William Campbell
2011-05-27 15:44 ` Scott McNutt
2011-05-27 15:59 ` J. William Campbell
2011-05-29 15:55 ` Wolfgang Denk
2011-05-29 19:12 ` Simon Glass
2011-05-30 10:57 ` Wolfgang Denk
2011-05-30 11:47 ` Graeme Russ
2011-05-30 12:31 ` Wolfgang Denk
2011-05-30 12:46 ` Graeme Russ
2011-05-30 18:57 ` Reinhard Meyer
2011-05-31 0:24 ` Graeme Russ
2011-05-31 4:07 ` Reinhard Meyer
2011-05-31 4:24 ` Graeme Russ
2011-05-31 4:36 ` Reinhard Meyer
2011-05-31 4:53 ` Graeme Russ
2011-05-31 5:56 ` Wolfgang Denk
2011-05-31 4:45 ` Simon Glass
2011-05-31 4:53 ` Reinhard Meyer
2011-05-31 5:03 ` Graeme Russ
2011-05-31 5:16 ` Reinhard Meyer
2011-05-31 6:03 ` Wolfgang Denk
2011-05-31 6:23 ` Graeme Russ
2011-05-31 5:18 ` Wolfgang Denk
2011-05-31 5:37 ` Reinhard Meyer
2011-05-31 6:10 ` Wolfgang Denk
2011-05-31 4:56 ` Simon Glass
2011-05-31 5:49 ` Wolfgang Denk
2011-05-31 6:28 ` Graeme Russ
2011-05-31 6:29 ` Graeme Russ
2011-06-15 13:17 ` Graeme Russ
2011-06-15 16:03 ` Simon Glass
2011-06-15 20:38 ` Graeme Russ
2011-06-15 21:58 ` Simon Glass
2011-06-15 23:09 ` Graeme Russ
2011-06-16 5:53 ` Simon Glass
2011-06-16 6:27 ` Graeme Russ
2011-06-16 13:58 ` Simon Glass
2011-05-27 11:26 ` Wolfgang Denk
2011-05-27 14:23 ` J. William Campbell
2011-05-28 5:53 ` Graeme Russ
2011-05-28 6:18 ` Reinhard Meyer
2011-05-28 8:59 ` Graeme Russ
2011-05-29 1:41 ` J. William Campbell
2011-05-26 17:49 ` Wolfgang Denk
2011-05-26 22:51 ` Graeme Russ
2011-05-27 7:17 ` Wolfgang Denk
2011-05-27 7:33 ` Graeme Russ
2011-05-27 7:45 ` Wolfgang Denk
2011-05-27 14:58 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DE0429B.5070409@gmail.com \
--to=graeme.russ@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox