From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Eric_B=E9nard?= Date: Sat, 04 Jun 2011 22:50:07 +0200 Subject: [U-Boot] Question re: Bluewater Systems Snapper 9260 and 9G20 modules patch In-Reply-To: References: Message-ID: <4DEA9A7F.4020504@eukrea.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Simon, On 04/06/2011 20:47, Simon Glass wrote: > Hi Reinhard, > > I have been asked to have a quick look at this patch, which is showing > accepted here: > > http://patchwork.ozlabs.org/patch/81422/ > > The diffstat on patchwork is: > > MAINTAINERS | 5 + > board/bluewater/snapper9260/Makefile | 53 ++++++++ > board/bluewater/snapper9260/snapper9260.c | 169 +++++++++++++++++++++++++ > boards.cfg | 2 + > include/configs/snapper9260.h | 191 +++++++++++++++++++++++++++++ > 5 files changed, 420 insertions(+), 0 deletions(-) > create mode 100644 board/bluewater/snapper9260/Makefile > create mode 100644 board/bluewater/snapper9260/snapper9260.c > create mode 100644 include/configs/snapper9260.h > > but when I look at the commit I only see this: > > git log --author=Ryan --stat > commit 74cd9777f8dd44fd944a9ac75cfbc24eeb206453 > Author: Ryan Mallon > Date: Tue Feb 1 16:18:00 2011 +0000 > > Add support for Bluewater Systems Snapper 9260 and 9G20 modules > > Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 > single board computer modules. Includes NAND flash and Ethernet > support. > > Signed-off-by: Ryan Mallon > > boards.cfg | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > > As a result it does not build. Has something been dropped by mistake? > 9260 seems broken (and also arch/arm/cpu/arm926ejs/at91/lowlevel_init.S), this may help : diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 6bdc75c..ace1ca8 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -24,9 +24,10 @@ #include #include +#include #include #include -#include +#include /* * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all