From: Felix Radensky <felix@embedded-sol.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] mx31ads: Use the new relocation scheme
Date: Sun, 05 Jun 2011 01:18:15 +0300 [thread overview]
Message-ID: <4DEAAF27.8080406@embedded-sol.com> (raw)
Hi Fabio,
On 01/-10/-28163 09:59 PM, wrote:
> Signed-off-by: Fabio Estevam fabio.estevam at freescale.com
> ---
> Changes since v2:
> - Use PHYS_SDRAM_1 in get_ram_size
> - Remove local config.mk
>
> Changes since v1:
>
> - Fixed lines over 80 characters.
>
> Build tested only.
>
> Do not have the hardware handy to test.
>
I've tested your patch on mx31ads. Unfortunately it bricks the board.
There are no messages on console. The latest u-boot version that
works on this board is 2010.09. I've compiled u-boot using ELDK-4.2.
If you have any ideas, I'm ready to test your patches.
Felix.
next reply other threads:[~2011-06-04 22:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-04 22:18 Felix Radensky [this message]
2011-06-04 23:24 ` [U-Boot] [PATCH v3] mx31ads: Use the new relocation scheme Fabio Estevam
2011-06-05 7:28 ` Felix Radensky
2011-06-05 14:47 ` Fabio Estevam
2011-06-12 21:58 ` Fabio Estevam
2011-06-12 22:31 ` Fabio Estevam
2011-06-13 4:34 ` Felix Radensky
-- strict thread matches above, loose matches on Subject: below --
2011-06-02 19:26 Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DEAAF27.8080406@embedded-sol.com \
--to=felix@embedded-sol.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox