From: Reinhard Meyer <u-boot@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] at91sam9260ek: pull up on gpio
Date: Mon, 06 Jun 2011 08:13:19 +0200 [thread overview]
Message-ID: <4DEC6FFF.8040803@emk-elektronik.de> (raw)
In-Reply-To: <4DB7B9CE.1030002@aksignal.cz>
Dear Prchal Ji??,
> This fixes floating pin PB14 (DRXD) if it is unconnected, witch cause sometimes to stop autoboot by receiving char
> (noise). It turns internal pull up on this pin.
> It turns pull up on all other pins where should be pull up and is set in driver too.
>
> Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
>
> --- u-boot-2010.09/include/configs/at91sam9260ek.h.orig 2010-09-28 23:20:55.000000000 +0200
> +++ u-boot-2010.09/include/configs/at91sam9260ek.h 2011-04-27 08:05:16.231133740 +0200
> @@ -55,6 +55,7 @@
> * Hardware drivers
> */
> #define CONFIG_AT91_GPIO 1
> +#define CONFIG_AT91_GPIO_PULLUP 1
> #define CONFIG_ATMEL_USART 1
> #undef CONFIG_USART0
> #undef CONFIG_USART1
This is based on old code.
Anyway, the Pull-Ups are enabled in the current (not yet in mainline) at91sam9260ek port.
Best Regards,
Reinhard
prev parent reply other threads:[~2011-06-06 6:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-27 6:38 [U-Boot] [PATCH] at91sam9260ek: pull up on gpio Prchal Jiří
2011-06-06 6:13 ` Reinhard Meyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DEC6FFF.8040803@emk-elektronik.de \
--to=u-boot@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox