[U-Boot] Fwd: [STATUS] WARNING: huge ARM board removal pending

[Hong Xu <hong.xu@atmel.com>]

Hi Reinhard,

On 06/07/2011 04:18 PM, Reinhard Meyer wrote:
> Dear Xu, Hong,
>> Dear Reinhard,
>>
>> We just noticed the warning from Wolfgang Denk about the status of the ARM boards.
>
> See http://article.gmane.org/gmane.comp.boot-loaders.u-boot/100918
>>
>> There're quite a lot of AT91 boards listed. We're going to focus on
>
> fixing the current issues to let MAKEALL happy. :-)
>>
>> I know exactly your great work on AT91 and AVR32. The rework you're
>
> doing is quite excellent. We of course want to sync with what you have
>
> done. Could you please describe us the starting point we can begin with?
>
> Do you have special things which we can help? And so on ...
>>
>> Thanks a lot.
>
> If there are SoC specific files to be adapted, they should be adapted
> as done in 9260.
>
> Board specific files should be looking like those of at91sam9260-ek.
>
> Remove fixed boards from the global Makefile and add them to boards.cfg.
>
> I'll put the fix for at91sam9260*-ek on u-boot-atmel/master in the next hours,
> you can have a look at it - or look at the patch I posted yesterday for it.

OK, very nice. I'm just worried because I can not compile at91sam9260ek 
on u-boot-atmel/master and u-boot-atmel/next 3 hrs ago.

So, we're waiting for your work on sam9260 and take it as a starting 
point for other boards.

> Two notes:
> 1. please limit line length in e-Mails to 80 or less - I had to manually
> break your mail to be able to read it.
>
> 2. please post to the u-boot mailing list as well

No problem.

BR,
Eric

> Best Regards,
>
> Reinhard