* [U-Boot] [PATCH] mx31ads: Fix environment location on flash
@ 2011-06-06 15:06 Felix Radensky
2011-06-07 13:10 ` Stefano Babic
0 siblings, 1 reply; 2+ messages in thread
From: Felix Radensky @ 2011-06-06 15:06 UTC (permalink / raw)
To: u-boot
At the moment u-boot and u-boot environment on flash
have overlapping addresses, so each u-boot update erases
the environment. Fix this by placing evironment right
after u-boot. Also, remove confusing comment about environment
location.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
---
include/configs/mx31ads.h | 10 +++-------
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 6d6c1bd..3c61911 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -182,18 +182,14 @@
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE (32 * 1024)
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
- * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
- * if we put environment next to it, we will have to occupy 128KiB for it.
- * Putting it at the top of flash we use only 32KiB. */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
--
1.7.4.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] mx31ads: Fix environment location on flash
2011-06-06 15:06 [U-Boot] [PATCH] mx31ads: Fix environment location on flash Felix Radensky
@ 2011-06-07 13:10 ` Stefano Babic
0 siblings, 0 replies; 2+ messages in thread
From: Stefano Babic @ 2011-06-07 13:10 UTC (permalink / raw)
To: u-boot
On 06/06/2011 05:06 PM, Felix Radensky wrote:
> At the moment u-boot and u-boot environment on flash
> have overlapping addresses, so each u-boot update erases
> the environment. Fix this by placing evironment right
> after u-boot. Also, remove confusing comment about environment
> location.
>
> Signed-off-by: Felix Radensky <felix@embedded-sol.com>
> ---
> include/configs/mx31ads.h | 10 +++-------
> 1 files changed, 3 insertions(+), 7 deletions(-)
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-06-07 13:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-06 15:06 [U-Boot] [PATCH] mx31ads: Fix environment location on flash Felix Radensky
2011-06-07 13:10 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox