* [U-Boot] Atmel pull request?
@ 2011-06-09 7:06 Wolfgang Denk
2011-06-09 7:13 ` Eric Bénard
2011-06-09 7:59 ` Reinhard Meyer
0 siblings, 2 replies; 6+ messages in thread
From: Wolfgang Denk @ 2011-06-09 7:06 UTC (permalink / raw)
To: u-boot
Dear Reinhard,
what are the chances to see a pull request for the Atmel boards any
time soon? As is, theyu still form the majority of broken ARM boards,
and I would like to get the release out as soon as possible.
So I'd appreciate if we could have your pull request ASAP, then I
could make a -rc3 and allow for a few days of testing, before
releasing v2011.06.
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
After a time, you may find that "having" is not so pleasing a thing,
after all, as "wanting." It is not logical, but it is often true.
-- Spock, "Amok Time", stardate 3372.7
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Atmel pull request?
2011-06-09 7:06 [U-Boot] Atmel pull request? Wolfgang Denk
@ 2011-06-09 7:13 ` Eric Bénard
2011-06-09 9:03 ` Andreas Bießmann
2011-06-09 7:59 ` Reinhard Meyer
1 sibling, 1 reply; 6+ messages in thread
From: Eric Bénard @ 2011-06-09 7:13 UTC (permalink / raw)
To: u-boot
Hi,
On 09/06/2011 09:06, Wolfgang Denk wrote:
> what are the chances to see a pull request for the Atmel boards any
> time soon? As is, theyu still form the majority of broken ARM boards,
> and I would like to get the release out as soon as possible.
>
> So I'd appreciate if we could have your pull request ASAP, then I
> could make a -rc3 and allow for a few days of testing, before
> releasing v2011.06.
>
here are pending patches to unbreak several AT91 boards :
http://patchwork.ozlabs.org/patch/99096/
http://patchwork.ozlabs.org/patch/99097/
http://patchwork.ozlabs.org/patch/99099/
http://patchwork.ozlabs.org/patch/99098/
http://patchwork.ozlabs.org/patch/99400/
And the clock update for AT91RM9200 :
http://patchwork.ozlabs.org/patch/99344/
http://patchwork.ozlabs.org/patch/99550/
Thanks,
Eric
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Atmel pull request?
2011-06-09 7:13 ` Eric Bénard
@ 2011-06-09 9:03 ` Andreas Bießmann
2011-06-09 11:17 ` Wolfgang Denk
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2011-06-09 9:03 UTC (permalink / raw)
To: u-boot
Dear Eric B?nard,
Am 09.06.2011 09:13, schrieb Eric B?nard:
> Hi,
>
> On 09/06/2011 09:06, Wolfgang Denk wrote:
>> what are the chances to see a pull request for the Atmel boards any
>> time soon? As is, theyu still form the majority of broken ARM boards,
>> and I would like to get the release out as soon as possible.
>>
>> So I'd appreciate if we could have your pull request ASAP, then I
>> could make a -rc3 and allow for a few days of testing, before
>> releasing v2011.06.
>>
> And the clock update for AT91RM9200 :
> http://patchwork.ozlabs.org/patch/99344/
> http://patchwork.ozlabs.org/patch/99550/
These are not really required. These two are the first steps to get
atmel_usart working (I've got it now since yesterday evening on my
at91rm9200ek!). After another patch (replace at91rm9200_usart by
atmel_usart) we can remove at91rm9200_usart. The next step would be to
remove the whole a/a/c/arm920t/at91rm9200 directory and complete the
transition to at91 for at91rm9200 devices as described in README.at91-soc.
But I do not want to get these changes in precipitately. I'm fine with
an integration for 2011.09.
@Wolfgang: Deletion of defective ARM boards will start after 2011.06
release. Is that correct?
regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Atmel pull request?
2011-06-09 9:03 ` Andreas Bießmann
@ 2011-06-09 11:17 ` Wolfgang Denk
0 siblings, 0 replies; 6+ messages in thread
From: Wolfgang Denk @ 2011-06-09 11:17 UTC (permalink / raw)
To: u-boot
Dear Andreas,
In message <4DF08C57.8080901@gmail.com> you wrote:
>
> @Wolfgang: Deletion of defective ARM boards will start after 2011.06
> release. Is that correct?
Correct - though probably not right immediately (depending on
available time / current workload), and excluding boards where patches
have been announced.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Don't try to outweird me, three-eyes. I get stranger things than you
free with my breakfast cereal."
- Zaphod Beeblebrox in "Hitchhiker's Guide to the Galaxy"
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Atmel pull request?
2011-06-09 7:06 [U-Boot] Atmel pull request? Wolfgang Denk
2011-06-09 7:13 ` Eric Bénard
@ 2011-06-09 7:59 ` Reinhard Meyer
2011-06-09 11:11 ` Wolfgang Denk
1 sibling, 1 reply; 6+ messages in thread
From: Reinhard Meyer @ 2011-06-09 7:59 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
> Dear Reinhard,
>
> what are the chances to see a pull request for the Atmel boards any
> time soon? As is, theyu still form the majority of broken ARM boards,
> and I would like to get the release out as soon as possible.
>
> So I'd appreciate if we could have your pull request ASAP, then I
> could make a -rc3 and allow for a few days of testing, before
> releasing v2011.06.
I will be checking the latest patches on the list by today, accept them if
possible and issue a pull to Albert after that.
Best Regards,
Reinhard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Atmel pull request?
2011-06-09 7:59 ` Reinhard Meyer
@ 2011-06-09 11:11 ` Wolfgang Denk
0 siblings, 0 replies; 6+ messages in thread
From: Wolfgang Denk @ 2011-06-09 11:11 UTC (permalink / raw)
To: u-boot
Dear Reinhard Meyer,
In message <4DF07D45.2050902@emk-elektronik.de> you wrote:
>
> > what are the chances to see a pull request for the Atmel boards any
> > time soon? As is, theyu still form the majority of broken ARM boards,
> > and I would like to get the release out as soon as possible.
> >
> > So I'd appreciate if we could have your pull request ASAP, then I
> > could make a -rc3 and allow for a few days of testing, before
> > releasing v2011.06.
>
> I will be checking the latest patches on the list by today, accept them if
> possible and issue a pull to Albert after that.
Thanks a lot.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"What terrible way to die."
"There are no good ways."
-- Sulu and Kirk, "That Which Survives", stardate unknown
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-06-09 11:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-09 7:06 [U-Boot] Atmel pull request? Wolfgang Denk
2011-06-09 7:13 ` Eric Bénard
2011-06-09 9:03 ` Andreas Bießmann
2011-06-09 11:17 ` Wolfgang Denk
2011-06-09 7:59 ` Reinhard Meyer
2011-06-09 11:11 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox