[U-Boot] [PATCH] scb9328: Add ARM relocation support

[Torsten Koschorrek <koschorrek@synertronixx.de>]

Hello,

Stefano Babic wrote:
> On 06/10/2011 07:44 AM, Torsten Koschorrek wrote:
> Hi Torsten,
>
> send your answer to the ML, too. Someone else can help you ;-)
>

Oh, yes, right. This little 'Reply All' Button, sorry :-)

>>> size1 = get_ram_size((volatile void *)SCB9328_SDRAM_1,
>>>      SCB9328_SDRAM_1_SIZE);
>>> #if ( CONFIG_NR_DRAM_BANKS>   1 )
>>> size2 = get_ram_size((volatile void *)SCB9328_SDRAM_2,
>>>      SCB9328_SDRAM_2_SIZE);
>>> .....
>>>
>>> and then:
>>>      gd->ram_size = size1 + size2 + size3 + size4;
>>>
>>
>> Yes, I thought about it. The thing is, we only have one bank on the
>> system. So, dram_init_banksize() needs a cleanup, but that's a problem
>> for another cleanup-patch, which will be committed in a next step.
>>
>> (If it's needed I could do a minor cleanup first...)
>
> You decide. However, the code in the patch is wrong. If you have only
> one bank, you could directly simplify your code, I think.
>

Good point.

>>
>> Unfortunately I have to work on another project today and next week and
>> I think I'm not able to solve the hanging problem.
>
> Understood, I tried only to give you some hints where to check ;-)
>

... and I appreciate that very much :-) Above all, your answers showed 
me, that I was looking in the right direction so far.

>> Minor fixes (such as
>> config.mk) for the above patch should be possible, though.
>
> Ok, agree. Fix first the problem to make MAKEALL happy and build the
> board again.
>

OK, I just tested it again, MAKEALL is happy.

'include/configs/scb9328.h' is the only file that has to be patched with 
the patch already send to the ml. 'board/scb9328/config.mk' and 
'board/scb9328/scb9328.c' definately need a cleanup, but compilation is 
ok. The cleanup of those two files 'll be done next week. And hopefully 
I find some time next week to work on the hangup problem, too.

> Best regards,
> Stefano Babic
>

Thanks
Torsten