[U-Boot] [PATCH v3 0/6] OMAP: fix build breaks on OMAP boards

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Le 13/06/2011 13:17, Aneesh V a ?crit :
> Hi Albert,
>
> On Monday 13 June 2011 04:29 PM, Albert ARIBAUD wrote:
>> Hi Aneesh,
>>
>> Le 09/06/2011 13:24, Aneesh V a ?crit :
>>> Fix build breaks for OMAP boards.
>>> All the build breaks were due to couple of missing
>>> defines in the config file, namely:
>>>
>>> CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR
>>>
>>> They have been fixed by providing the right SDRAM
>>> base address and by using SRAM base as the initial
>>> stack address.
>>>
>>> None of these have been tested as I do not have any of
>>> these boards.
>>>
>>> V2:
>>> * Replaced the magic number used for CONFIG_SYS_INIT_SP_ADDR
>>> with a symbolic name - PHYS_SRAM - indicating that SRAM is
>>> used for the intial stack. Made this change in all the
>>> patches.
>>> V3:
>>> * Missed doing the V2 change for omap1610inn. Fixed that
>>>
>>> Aneesh V (6):
>>> omap1610h2: fix build breaks
>>> omap5912osk: fix build breaks
>>> omap1510inn: fix build breaks
>>> omap1610inn: fix build breaks
>>> omap2420h4: fix build breaks
>>> omap730p2: fix build breaks
>>>
>>> include/configs/omap1510inn.h | 5 +++++
>>> include/configs/omap1610h2.h | 5 +++++
>>> include/configs/omap1610inn.h | 5 +++++
>>> include/configs/omap2420h4.h | 4 ++++
>>> include/configs/omap5912osk.h | 5 +++++
>>> include/configs/omap730p2.h | 5 +++++
>>> 6 files changed, 29 insertions(+), 0 deletions(-)
>>
>> Hmm, seems like they don't apply cleanly above current
>> u-boot-arm/master. Can you rebase and resend as V4 ?
>
> I see that my patches are already applied there?
>
> br,
> Aneesh

Oops. They were in the u-boot-ti pull request I /just/ applied. Please 
bear with me while I hit my forehead on my desk repeatedly.

Amicalement,
-- 
Albert.