[U-Boot] OMAP3 clocks initialization not consistent with x-loader?

[Igor Grinberg <grinberg@compulab.co.il>]

Hi,


x-loader has the following comment and if statement for all boards supporting omap36xx SoC:

----------------------cut----------------------------------------

    /*

     * On OMAP3630, DDR data corruption has been observed on OFF mode
     * exit if the sys clock was lower than 26M. As a work around,
     * OMAP3630 is operated at 26M sys clock and this internal division
     * is not performed.
     */
    if((is_cpu_family() != CPU_OMAP36XX) && (sys_clkin_sel > 2)) {
        sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
        clk_index = sys_clkin_sel/2;
    } else {
        sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
        clk_index = sys_clkin_sel;
    }
----------------------cut----------------------------------------


U-Boot's omap3 clock initialization does not have that check for omap36xx.

Shouldn't we have it also in U-Boot to workaround that DDR data corruption issue?



-- 
Regards,
Igor.