[U-Boot] Pull request u-boot-marvell.git

Albert ARIBAUD
2011-09-13T17:43:01Z

Hi Prafulla,

Le 13/09/2011 15:08, Prafulla Wadaskar a ?crit :
> Hi Albert
>
> Please kindly pull
> The following changes since commit 07db205b5186ac9722a1f141d97c9a67c43c4ae1:
> Joe Hershberger (1):
> omap4_panda: Ignore omap4 SPL called MLO
>
> are available in the git repository at:
>
> u-boot-marvell.git next branch.
>
> Ajay Bhargav (3):
> net: Adds Fast Ethernet Controller driver for Armada100
> Armada100: Enable Ethernet support for GplugD
> Armada100: Enable 88E3015 PHY support for GplugD
>
> arch/arm/include/asm/arch-armada100/armada100.h | 58 ++
> arch/arm/include/asm/arch-armada100/mfp.h | 19 +
> board/Marvell/gplugd/gplugd.c | 71 +++
> drivers/net/Makefile | 1 +
> drivers/net/armada100_fec.c | 736 +++++++++++++++++++++++
> drivers/net/armada100_fec.h | 232 +++++++
> include/configs/gplugd.h | 30 +-
> include/netdev.h | 1 +
> 8 files changed, 1146 insertions(+), 2 deletions(-)
> create mode 100644 drivers/net/armada100_fec.c
> create mode 100644 drivers/net/armada100_fec.h
>
> Regards..
> Prafulla . .

I assume that this 'next' branch is actually your 'master' for the
upcoming release, and you want me to apply it to u-boot-arm/master, right?

If so, please use 'master' as the branch to pull next time, so that
there is no doubt what you are asking.

Amicalement,
--
Albert.