[U-Boot] [U-Boot PATCH MX31:] mxc_spi.c: typo fixed

[U-Boot] [U-Boot PATCH MX31:] mxc_spi.c: typo fixed

[Helmut.Raiger at hale.at]

From: Helmut Raiger <helmut.raiger@hale.at>


Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
---
 drivers/spi/mxc_spi.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index f909e07..698e726 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -31,7 +31,7 @@
 /* i.MX27 has a completely wrong register layout and register definitions in the
  * datasheet, the correct one is in the Freescale's Linux driver */
 
-#error "i.MX27 CSPI not supported due to drastic differences in register definisions" \
+#error "i.MX27 CSPI not supported due to drastic differences in register definitions" \
 "See linux mxc_spi driver from Freescale for details."
 
 #elif defined(CONFIG_MX31)
-- 
1.7.4.4



--
Scanned by MailScanner.

[U-Boot] [U-Boot PATCH MX31:] mxc_spi.c: typo fixed

[Stefano Babic]

On 06/15/2011 01:45 PM, Helmut.Raiger at hale.at wrote:
> From: Helmut Raiger <helmut.raiger@hale.at>
> 
> 
> Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================