From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Fri, 24 Jun 2011 16:20:11 +0200
Subject: [U-Boot] Run U-boot from Flash!
In-Reply-To: <31920053.post@talk.nabble.com>
References: <31920053.post@talk.nabble.com>
Message-ID: <4E049D1B.8020500@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 06/24/2011 03:53 PM, manojatl wrote:
> 
> Hi,
> 

Hi,

> We are in the process of porting linux to our custom board. We are using
> u-boot-1.1.6 as bootloader.

Before you waste your time: make a pleasure to yourself and update to
the last U-Boot code, better from GIT repository (git.denx.de). Your
version is so old that it is quite difficult to find someone remembering
details about it.

> We are able to successfully port u-boot in RAM
> to our custom board. But we want to run the u-boot from flash. We understand
> that u-boot is capable of relocating the code from flash to ram.

You have not indicated which architecture you have (ARM,PPC, ...), and
from which board you are basing your porting.

> Expecting a postive response. 

Start using last code and check again if you have relevant issues.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================