public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Orjan Friberg <of@flatfrog.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] musb_cfg.extvbus = 1 reverted by bus reset?
Date: Thu, 30 Jun 2011 14:19:23 +0200	[thread overview]
Message-ID: <4E0C69CB.1010400@flatfrog.com> (raw)

Hi,

Using external VBUS on the OTG port in host mode, I have set 
musb_cfg.extvbus = 1.

However, after a 'usb start', the DRVVBUS bit in OTG_CTRL is always set 
to 1 (regardless of the value of musb_cfg.extvbus).  Immediately after 
boot it is 0.  (I ran 'i2c md 0x48 0xa 1'.)

In musb_hcd.c, the extvbus setting is done *before* the usb bus is 
reset.  The TPS65920 TRM says that DRVVBUS is turned on when the chip 
acts as a host.  It seems to me that the DRVVBUS setting is reverted by 
the chip going into host mode.

Any ideas?

(This is on 2011.03, but latest git seems to have the same construct.)


Thanks,
Orjan

-- 
Orjan Friberg
FlatFrog Laboratories AB

                 reply	other threads:[~2011-06-30 12:19 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E0C69CB.1010400@flatfrog.com \
    --to=of@flatfrog.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox