From: Alex Waterman <awaterman@dawning.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build?
Date: Fri, 01 Jul 2011 09:15:12 -0400 [thread overview]
Message-ID: <4E0DC860.2050904@dawning.com> (raw)
In-Reply-To: <657FC3AB549C7F4DB01F4397232ED733A2DACD736C@Exchange2007.techatl.com>
Bill,
On 06/30/2011 04:54 PM, William C. Landolina wrote:
> I start with Atmel's vanilla first stage boot from NAND. I have a much hacked SDCard boot that works as well and that is where I want to head. My target systems do not have NAND or Dataflash. (I can put NAND on my boards for development but I do not want to ship with NAND.)
I see. I have not tried any of the MMC u-boot stuff for my board (a
sam9m10g45ek).
> I hacked the December release to work, but I know I did some things in the wrong places and in a style that is not Wolfgang-compatible. I stopped working on improving the December release because it was clear that a lot of good things were happening to the MMC framework and the underlying AT91 framework was in flux so it seemed like a good idea to wait until that stabilized before I revisit putting a modern U-Boot on my boards "the right way".
Ahh, Wolfgang compatible :). I still haven't really figured out exactly what is
actually correct with the AT91 framework code yet. I just started playing with
this a few weeks ago. There was a patch a little which back which was the
reference implementation for the AT91 framework, but I could not find it when I
searched my mail box.
> I only have one bank of RAM on my custom target so I didn't test the second bank. On my targets the other EBI interface runs a bunch of slow peripherals.
Ah, so dual RAM is no matter for you.
Which config header are you using? Naturally, I am using the sam9m10g45ek
header, but since you have a slightly different board, which doesn't
appear to have a header, how did you proceed?
Best regards,
Alex
--
Alex Waterman
Computer Engineer
Phone: 215-896-4920
Email: awaterman at dawning.com
next prev parent reply other threads:[~2011-07-01 13:15 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 22:47 [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build? William C. Landolina
2011-06-30 12:32 ` Alex Waterman
2011-06-30 13:12 ` Albert ARIBAUD
2011-06-30 20:01 ` Alex Waterman
2011-06-30 19:14 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 1/8] Remove old config stuff from Makefile Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 2/8] Update at91sam9m10g45_devices.c to fix compile errors Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 3/8] Fix compile problem for some boards in the clock code Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 4/8] Updates the at91sam9mg45_matrix.h header to new defines Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 5/8] Updates the board specific files for the at91sam9mg45ek Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 6/8] Adds wait to atmel_usart serial_init function Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 7/8] Updates the at91sam9m10g45ek.h config file Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 8/8] Updates the boards.cfg file Alex.Waterman.awaterman at dawning.com
[not found] ` <657FC3AB549C7F4DB01F4397232ED733A2DACD735E@Exchange2007.techatl.com>
2011-06-30 19:32 ` [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build? Alex Waterman
2011-06-30 20:54 ` William C. Landolina
2011-07-01 13:15 ` Alex Waterman [this message]
2011-07-01 19:37 ` William C. Landolina
2011-06-30 19:32 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 1/8] Remove old config stuff from Makefile Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 2/8] Update at91sam9m10g45_devices.c to fix compile errors Alex Waterman
2011-07-04 7:35 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 3/8] Fix compile problem for some boards in the clock code Alex Waterman
2011-07-04 7:37 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 4/8] Updates the at91sam9mg45_matrix.h header to new defines Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 5/8] Updates the board specific files for the at91sam9mg45ek Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 6/8] Adds wait to atmel_usart serial_init function Alex Waterman
2011-07-01 12:03 ` Sergei Shtylyov
2011-07-01 12:37 ` Alex Waterman
2011-07-01 15:17 ` Albert ARIBAUD
2011-07-04 7:42 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 7/8] Updates the at91sam9m10g45ek.h config file Alex Waterman
2011-07-04 7:50 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 8/8] Updates the boards.cfg file Alex Waterman
2011-07-04 7:52 ` Reinhard Meyer
2011-08-02 8:19 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E0DC860.2050904@dawning.com \
--to=awaterman@dawning.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox