* [U-Boot] debugging with XDS100v2 Omap 3530
@ 2011-07-02 13:47 Amit kumar
2011-07-02 14:15 ` Albert ARIBAUD
2011-07-04 13:41 ` Nick Thompson
0 siblings, 2 replies; 4+ messages in thread
From: Amit kumar @ 2011-07-02 13:47 UTC (permalink / raw)
To: u-boot
Hi,
I am new to U-Boot and my task involves porting U-Boot to Omap3530. I have
XDS100v2 but I don't have a JTAG Software to support this on Ubuntu host PC.
Please, suggest an open source Jtag Software for this.
--
Thanking you.
From:
Amit kumar
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] debugging with XDS100v2 Omap 3530
2011-07-02 13:47 [U-Boot] debugging with XDS100v2 Omap 3530 Amit kumar
@ 2011-07-02 14:15 ` Albert ARIBAUD
2011-07-04 13:41 ` Nick Thompson
1 sibling, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2011-07-02 14:15 UTC (permalink / raw)
To: u-boot
Hi Amit,
Le 02/07/2011 15:47, Amit kumar a ?crit :
> Hi,
> I am new to U-Boot and my task involves porting U-Boot to Omap3530. I have
> XDS100v2 but I don't have a JTAG Software to support this on Ubuntu host PC.
>
> Please, suggest an open source Jtag Software for this.
OpenOCD supports the xds100v2, but not in the version available in the
Ubuntu 11.04 (Natty) or 11.10 (Oneiric) repositories; you'll have to
git-clone the latest openocd and build it from source.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] debugging with XDS100v2 Omap 3530
2011-07-02 13:47 [U-Boot] debugging with XDS100v2 Omap 3530 Amit kumar
2011-07-02 14:15 ` Albert ARIBAUD
@ 2011-07-04 13:41 ` Nick Thompson
2011-07-04 14:11 ` Amit kumar
1 sibling, 1 reply; 4+ messages in thread
From: Nick Thompson @ 2011-07-04 13:41 UTC (permalink / raw)
To: u-boot
On 02/07/11 14:47, Amit kumar wrote:
> Hi,
> I am new to U-Boot and my task involves porting U-Boot to Omap3530. I have
> XDS100v2 but I don't have a JTAG Software to support this on Ubuntu host PC.
>
> Please, suggest an open source Jtag Software for this.
TI's debugger CCSv5.1.x (not open source) plugs into Eclipse (which is) and, I
understand, comes with a license to use XDS100. So it is free to use, but not
100% open source.
I've only used it on OMAP-L137. And I have and XDS510 not XDS100 because
the 100 is very slow. We have 3530s also but most people are still using CCSv4
here.
Nick.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] debugging with XDS100v2 Omap 3530
2011-07-04 13:41 ` Nick Thompson
@ 2011-07-04 14:11 ` Amit kumar
0 siblings, 0 replies; 4+ messages in thread
From: Amit kumar @ 2011-07-04 14:11 UTC (permalink / raw)
To: u-boot
Hi,
I found openocd and xds100v2 working with omap3530, the issue was related
to libusb version (0.1.12 works fine).
Still trying to use it fully.
Thanks very much.
On Mon, Jul 4, 2011 at 7:11 PM, Nick Thompson <nick.thompson@ge.com> wrote:
> On 02/07/11 14:47, Amit kumar wrote:
> > Hi,
> > I am new to U-Boot and my task involves porting U-Boot to Omap3530. I
> have
> > XDS100v2 but I don't have a JTAG Software to support this on Ubuntu host
> PC.
> >
> > Please, suggest an open source Jtag Software for this.
> TI's debugger CCSv5.1.x (not open source) plugs into Eclipse (which is)
> and, I
> understand, comes with a license to use XDS100. So it is free to use, but
> not
> 100% open source.
>
> I've only used it on OMAP-L137. And I have and XDS510 not XDS100 because
> the 100 is very slow. We have 3530s also but most people are still using
> CCSv4
> here.
>
> Nick.
>
--
Thanking you.
From:
Amit kumar
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-07-04 14:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-02 13:47 [U-Boot] debugging with XDS100v2 Omap 3530 Amit kumar
2011-07-02 14:15 ` Albert ARIBAUD
2011-07-04 13:41 ` Nick Thompson
2011-07-04 14:11 ` Amit kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox