[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Lukasz Majewski]

This commit adds I2C software support for Samsung's S5PC110
family of processors.
The generic drivers/i2c/soft_i2c framework is used, with
routines provided by this commit.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
 arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h |   52 +++++++++++
 board/samsung/goni/goni.c                    |   33 +++++++-
 drivers/i2c/Makefile                         |    1 +
 drivers/i2c/s5p_gpio_i2c.c                   |  123 ++++++++++++++++++++++++++
 include/configs/s5p_goni.h                   |    8 ++
 5 files changed, 216 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
 create mode 100644 drivers/i2c/s5p_gpio_i2c.c

diff --git a/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h b/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
new file mode 100644
index 0000000..83b8179
--- /dev/null
+++ b/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __I2C_GPIO_H_
+#define __I2C_GPIO_H_
+
+#ifndef __ASSEMBLY__
+struct i2c_gpio_bus_data {
+	unsigned int gpio_base;
+	unsigned int sda_pin;
+	unsigned int scl_pin;
+};
+
+struct i2c_gpio_bus {
+	struct i2c_gpio_bus_data *bus;
+};
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index);
+void i2c_gpio_dir(int dir);
+void i2c_gpio_set(int line, int value);
+int i2c_gpio_get(void);
+void i2c_gpio_set_bus(int index);
+
+#define I2C_SDA(x)		i2c_gpio_set(1, x)
+#define I2C_SCL(x)		i2c_gpio_set(0, x)
+#define I2C_READ		(!!i2c_gpio_get())
+#define I2C_ACTIVE		i2c_gpio_dir(1)
+#define I2C_TRISTATE		i2c_gpio_dir(0)
+#define I2C_DELAY		udelay(5)
+
+#endif
+#endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 581935d..8149ebf 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -1,7 +1,8 @@
 /*
- *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Copyright (C) 2008-2011 Samsung Electronics
  *  Minkyu Kang <mk7.kang@samsung.com>
  *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Lukasz Majewski <l.majewski@samsung.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,6 +24,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
 
@@ -96,3 +98,32 @@ int board_mmc_init(bd_t *bis)
 	return s5p_mmc_init(0, 4);
 }
 #endif
+
+/* Define I2C parameters to handle usb transmission */
+enum { I2C_PMIC, I2C_NUM, };
+
+/*
+ * i2c pmic
+ * SDA: GPJ4[0]
+ * SCL: GPJ4[3]
+ */
+static struct i2c_gpio_bus_data i2c_pmic = {
+	.sda_pin	= 0,
+	.scl_pin	= 3,
+};
+
+static struct i2c_gpio_bus i2c_gpio[] = {
+	{
+		.bus	= &i2c_pmic,
+	},
+};
+
+#define S5PC110_GPIO_J3        0XE02002C0
+
+void i2c_init_board(void)
+{
+	i2c_gpio[I2C_PMIC].bus = &i2c_pmic;
+	i2c_gpio[I2C_PMIC].bus->gpio_base = S5PC110_GPIO_J3;
+
+	i2c_gpio_init(i2c_gpio, I2C_NUM, I2C_PMIC);
+}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a48047a..47e9c56 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -42,6 +42,7 @@ COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
 COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
+COBJS-$(CONFIG_S5P_GPIO_I2C) += s5p_gpio_i2c.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/i2c/s5p_gpio_i2c.c b/drivers/i2c/s5p_gpio_i2c.c
new file mode 100644
index 0000000..309bd4d
--- /dev/null
+++ b/drivers/i2c/s5p_gpio_i2c.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/i2c-gpio.h>
+#include <i2c.h>
+
+#ifdef CONFIG_SOFT_I2C
+
+static struct i2c_gpio_bus *i2c_gpio;
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index)
+{
+	int i;
+	struct s5p_gpio_bank *bank;
+
+	i2c_gpio = bus;
+
+	/* init all i2c gpio buses */
+	for (i = 0; i < len; i++) {
+		if (!i2c_gpio[i].bus)
+			continue;
+
+		bank = (struct s5p_gpio_bank *)i2c_gpio[i].bus->gpio_base;
+		if (!bank)
+			continue;
+
+		/* SDA */
+		gpio_direction_output(bank,
+				i2c_gpio[i].bus->sda_pin, 1);
+
+		/* SCL */
+		gpio_direction_output(bank,
+				i2c_gpio[i].bus->scl_pin, 1);
+	}
+
+	/* set default bus */
+	i2c_set_bus_num(index);
+}
+
+void i2c_gpio_set(int line, int value)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+
+	if (!i2c_gpio[bus_index].bus)
+		return;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return;
+
+	if (line)
+		line = i2c_gpio[bus_index].bus->sda_pin;
+	else
+		line = i2c_gpio[bus_index].bus->scl_pin;
+
+	gpio_set_value(bank, line, value);
+}
+
+int i2c_gpio_get(void)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+	if (!i2c_gpio[bus_index].bus)
+		return 0;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return 0;
+
+	return gpio_get_value(bank, i2c_gpio[bus_index].bus->sda_pin);
+}
+
+void i2c_gpio_dir(int dir)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+	if (!i2c_gpio[bus_index].bus)
+		return;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return;
+
+	if (dir) {
+		gpio_direction_output(bank,
+				i2c_gpio[bus_index].bus->sda_pin, 0);
+	} else {
+		gpio_direction_input(bank,
+				i2c_gpio[bus_index].bus->sda_pin);
+	}
+}
+
+#endif	/* CONFIG_SOFT_I2C */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d648ce8..50726f7 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -221,4 +221,12 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
+/* I2C Soft */
+#include <asm/arch/i2c-gpio.h>
+#define CONFIG_S5P_GPIO_I2C	1
+#define CONFIG_SOFT_I2C		1
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED	50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS	7
 #endif	/* __CONFIG_H */
-- 
1.7.2.3

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Lukasz Majewski]

This commit adds I2C software support for Samsung's S5PC110
family of processors.
The generic drivers/i2c/soft_i2c framework is used, with
routines provided by this commit.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
 arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h |   52 +++++++++++
 board/samsung/goni/goni.c                    |   33 +++++++-
 drivers/i2c/Makefile                         |    1 +
 drivers/i2c/s5p_gpio_i2c.c                   |  123 ++++++++++++++++++++++++++
 include/configs/s5p_goni.h                   |    8 ++
 5 files changed, 216 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
 create mode 100644 drivers/i2c/s5p_gpio_i2c.c

diff --git a/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h b/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
new file mode 100644
index 0000000..83b8179
--- /dev/null
+++ b/arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __I2C_GPIO_H_
+#define __I2C_GPIO_H_
+
+#ifndef __ASSEMBLY__
+struct i2c_gpio_bus_data {
+	unsigned int gpio_base;
+	unsigned int sda_pin;
+	unsigned int scl_pin;
+};
+
+struct i2c_gpio_bus {
+	struct i2c_gpio_bus_data *bus;
+};
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index);
+void i2c_gpio_dir(int dir);
+void i2c_gpio_set(int line, int value);
+int i2c_gpio_get(void);
+void i2c_gpio_set_bus(int index);
+
+#define I2C_SDA(x)		i2c_gpio_set(1, x)
+#define I2C_SCL(x)		i2c_gpio_set(0, x)
+#define I2C_READ		(!!i2c_gpio_get())
+#define I2C_ACTIVE		i2c_gpio_dir(1)
+#define I2C_TRISTATE		i2c_gpio_dir(0)
+#define I2C_DELAY		udelay(5)
+
+#endif
+#endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 581935d..8149ebf 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -1,7 +1,8 @@
 /*
- *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Copyright (C) 2008-2011 Samsung Electronics
  *  Minkyu Kang <mk7.kang@samsung.com>
  *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Lukasz Majewski <l.majewski@samsung.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,6 +24,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
 
@@ -96,3 +98,32 @@ int board_mmc_init(bd_t *bis)
 	return s5p_mmc_init(0, 4);
 }
 #endif
+
+/* Define I2C parameters to handle usb transmission */
+enum { I2C_PMIC, I2C_NUM, };
+
+/*
+ * i2c pmic
+ * SDA: GPJ4[0]
+ * SCL: GPJ4[3]
+ */
+static struct i2c_gpio_bus_data i2c_pmic = {
+	.sda_pin	= 0,
+	.scl_pin	= 3,
+};
+
+static struct i2c_gpio_bus i2c_gpio[] = {
+	{
+		.bus	= &i2c_pmic,
+	},
+};
+
+#define S5PC110_GPIO_J3        0XE02002C0
+
+void i2c_init_board(void)
+{
+	i2c_gpio[I2C_PMIC].bus = &i2c_pmic;
+	i2c_gpio[I2C_PMIC].bus->gpio_base = S5PC110_GPIO_J3;
+
+	i2c_gpio_init(i2c_gpio, I2C_NUM, I2C_PMIC);
+}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a48047a..47e9c56 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -42,6 +42,7 @@ COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
 COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
+COBJS-$(CONFIG_S5P_GPIO_I2C) += s5p_gpio_i2c.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/i2c/s5p_gpio_i2c.c b/drivers/i2c/s5p_gpio_i2c.c
new file mode 100644
index 0000000..309bd4d
--- /dev/null
+++ b/drivers/i2c/s5p_gpio_i2c.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/i2c-gpio.h>
+#include <i2c.h>
+
+#ifdef CONFIG_SOFT_I2C
+
+static struct i2c_gpio_bus *i2c_gpio;
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index)
+{
+	int i;
+	struct s5p_gpio_bank *bank;
+
+	i2c_gpio = bus;
+
+	/* init all i2c gpio buses */
+	for (i = 0; i < len; i++) {
+		if (!i2c_gpio[i].bus)
+			continue;
+
+		bank = (struct s5p_gpio_bank *)i2c_gpio[i].bus->gpio_base;
+		if (!bank)
+			continue;
+
+		/* SDA */
+		gpio_direction_output(bank,
+				i2c_gpio[i].bus->sda_pin, 1);
+
+		/* SCL */
+		gpio_direction_output(bank,
+				i2c_gpio[i].bus->scl_pin, 1);
+	}
+
+	/* set default bus */
+	i2c_set_bus_num(index);
+}
+
+void i2c_gpio_set(int line, int value)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+
+	if (!i2c_gpio[bus_index].bus)
+		return;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return;
+
+	if (line)
+		line = i2c_gpio[bus_index].bus->sda_pin;
+	else
+		line = i2c_gpio[bus_index].bus->scl_pin;
+
+	gpio_set_value(bank, line, value);
+}
+
+int i2c_gpio_get(void)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+	if (!i2c_gpio[bus_index].bus)
+		return 0;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return 0;
+
+	return gpio_get_value(bank, i2c_gpio[bus_index].bus->sda_pin);
+}
+
+void i2c_gpio_dir(int dir)
+{
+	struct s5p_gpio_bank *bank;
+	unsigned int bus_index;
+
+	bus_index = i2c_get_bus_num();
+	if (!i2c_gpio[bus_index].bus)
+		return;
+
+	bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+	if (!bank)
+		return;
+
+	if (dir) {
+		gpio_direction_output(bank,
+				i2c_gpio[bus_index].bus->sda_pin, 0);
+	} else {
+		gpio_direction_input(bank,
+				i2c_gpio[bus_index].bus->sda_pin);
+	}
+}
+
+#endif	/* CONFIG_SOFT_I2C */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d648ce8..50726f7 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -221,4 +221,12 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
+/* I2C Soft */
+#include <asm/arch/i2c-gpio.h>
+#define CONFIG_S5P_GPIO_I2C	1
+#define CONFIG_SOFT_I2C		1
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED	50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS	7
 #endif	/* __CONFIG_H */
-- 
1.7.2.3

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Mike Frysinger]

On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
> This commit adds I2C software support for Samsung's S5PC110
> family of processors.
> The generic drivers/i2c/soft_i2c framework is used, with
> routines provided by this commit.

if you simply implemented the generic gpio layer (asm/gpio.h), the soft_i2c.c 
code already handles gluing to GPIO pins.  then you wouldnt need a sep driver 
at all.  you can see the bf561-ezkit already using this code.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110705/159c7af5/attachment-0001.pgp 

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Heiko Schocher]

Hello Mike,

Mike Frysinger wrote:
> On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
>> This commit adds I2C software support for Samsung's S5PC110
>> family of processors.
>> The generic drivers/i2c/soft_i2c framework is used, with
>> routines provided by this commit.
> 
> if you simply implemented the generic gpio layer (asm/gpio.h), the soft_i2c.c 
> code already handles gluing to GPIO pins.  then you wouldnt need a sep driver 
> at all.  you can see the bf561-ezkit already using this code.
> -mike

Yes, that was my thought too. No seperate i2c driver should be needed
here.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Lukasz Majewski]

On Wed, 06 Jul 2011 07:56:20 +0200
Heiko Schocher <hs@denx.de> wrote:

> Hello Mike,
> 
> Mike Frysinger wrote:
> > On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
> >> This commit adds I2C software support for Samsung's S5PC110
> >> family of processors.
> >> The generic drivers/i2c/soft_i2c framework is used, with
> >> routines provided by this commit.
> > 
> > if you simply implemented the generic gpio layer (asm/gpio.h), the
> > soft_i2c.c code already handles gluing to GPIO pins.  then you
> > wouldnt need a sep driver at all.  you can see the bf561-ezkit
> > already using this code. -mike
> 
> Yes, that was my thought too. No seperate i2c driver should be needed
> here.
> 
> bye,
> Heiko

Thanks Mike and Heiko for reply.

However I've got some extra question.

In the bf651-ezkit.h file I can see the I2C definition:

#define CONFIG_SOFT_I2C
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1

My concern is about the situation when SoC needs more than one Software
I2C run via GPIO?

Please consider following scenario: 
One sensor is connected to pins 1(SCL) and 3(SDA) and another to 4(SCL)
and 5(SDA) in a GPIO port.

As fair as I've understood the software_i2c framework, it is supposed to
run only one instance of GPIO I2C.

Is there any way to "instantiate" more than one I2C GPIO interface via
software_i2c?

-- 
Best regards,

Lukasz Majewski

Samsung Poland R&D Center
Platform Group

[U-Boot] [PATCH] i2c:gpio:s5p: I2C GPIO Software implementation

[Heiko Schocher]

Hello Lukasz,

Lukasz Majewski wrote:
> On Wed, 06 Jul 2011 07:56:20 +0200
> Heiko Schocher <hs@denx.de> wrote:
> 
>> Hello Mike,
>>
>> Mike Frysinger wrote:
>>> On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
>>>> This commit adds I2C software support for Samsung's S5PC110
>>>> family of processors.
>>>> The generic drivers/i2c/soft_i2c framework is used, with
>>>> routines provided by this commit.
>>> if you simply implemented the generic gpio layer (asm/gpio.h), the
>>> soft_i2c.c code already handles gluing to GPIO pins.  then you
>>> wouldnt need a sep driver at all.  you can see the bf561-ezkit
>>> already using this code. -mike
>> Yes, that was my thought too. No seperate i2c driver should be needed
>> here.
>>
>> bye,
>> Heiko
> 
> Thanks Mike and Heiko for reply.
> 
> However I've got some extra question.
> 
> In the bf651-ezkit.h file I can see the I2C definition:
> 
> #define CONFIG_SOFT_I2C
> #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
> #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
> 
> My concern is about the situation when SoC needs more than one Software
> I2C run via GPIO?
> 
> Please consider following scenario: 
> One sensor is connected to pins 1(SCL) and 3(SDA) and another to 4(SCL)
> and 5(SDA) in a GPIO port.
> 
> As fair as I've understood the software_i2c framework, it is supposed to
> run only one instance of GPIO I2C.
> 
> Is there any way to "instantiate" more than one I2C GPIO interface via
> software_i2c?

It should be possible (not tested), but not very nice:

First, you have to define CONFIG_I2C_MULTI_BUS and CONFIG_SYS_MAX_I2C_BUS

Then your CONFIG_SOFT_I2C_GPIO_SDA and CONFIG_SOFT_I2C_GPIO_SCL
should look something like this:

#define CONFIG_SOFT_I2C_GPIO_SDA get_sda_pin

with

int get_sda_pin(void)
{
	int busnr = i2c_get_bus_num();
	switch (busnr) {
		case 0:
			return 3;
			break;
		case 1:
			return 5;
			break;
		[...]
	}
}

Cleaner would be to get the i2c multibus branch to mainline, see:
http://git.denx.de/?p=u-boot/u-boot-i2c.git;a=shortlog;h=refs/heads/multibus_v2

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany