[U-Boot] [PATCH] Fix: if using crc32 command watchdog timed out

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Hi Jens,

Le 17/07/2011 08:25, Jens Scharsig a ?crit :
> Hello,
> Am 2011-07-16 11:53, schrieb Albert ARIBAUD:
>> Hi Jens,
>>
>> Le 05/07/2011 09:26, Jens Scharsig a ?crit :
>>
>>> * Fix: if using crc32 command watchdog timed out
>>>
>>>
>>> Signed-off-by: Jens Scharsig<esw@bus-elektronik.de>
>>> ---
>>
>> Nitpick: in addition to describing which issue the patch fixes, can you
>> describe how it fixes it?
>
> If your board is using a watchdog and you try to calculate/check a CRC2
> with crc32 command, the watchdog timed out on large data blocks.
> The commands around uboot-images also uses crc32, but don't time out.
> The difference between:
>
> CRC32 command calls the the crc32 function and the"image" commands
> crc32_wd (i think _wd stands for watchdog). So this patch changes the
> the function call from crc32 to crc_32 to support watchdog reset in  the
> same way as "image" commands.

Sorry, I meant: describe what the fix does in the commit message, not on 
the list.

Generally, a patch commit message should always describe what the patch 
does.

> Best regards
>
> Jens

Amicalement,
-- 
Albert.