* [U-Boot] [PATCH 01/52] ARM: remove broken "assabet" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 02/52] ARM: remove broken "dnp1110" board Wolfgang Denk
` (52 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: George G. Davis <gdavis@mvista.com>
---
MAINTAINERS | 1 -
board/assabet/Makefile | 53 --------------
board/assabet/assabet.c | 131 ----------------------------------
board/assabet/config.mk | 7 --
board/assabet/setup.S | 136 -----------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/assabet.h | 173 ---------------------------------------------
8 files changed, 1 insertions(+), 502 deletions(-)
delete mode 100644 board/assabet/Makefile
delete mode 100644 board/assabet/assabet.c
delete mode 100644 board/assabet/config.mk
delete mode 100644 board/assabet/setup.S
delete mode 100644 include/configs/assabet.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 143f31b..3bcfc32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -625,7 +625,6 @@ Eric Cooper <ecc@cmu.edu>
George G. Davis <gdavis@mvista.com>
- assabet SA1100
gcplus SA1100
Wolfgang Denk <wd@denx.de>
diff --git a/board/assabet/Makefile b/board/assabet/Makefile
deleted file mode 100644
index b3cf4aa..0000000
--- a/board/assabet/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# 2004 (c) MontaVista Software, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := assabet.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
deleted file mode 100644
index 753c8d2..0000000
--- a/board/assabet/assabet.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Board dependent initialisation
- */
-
-#define ECOR 0x8000
-#define ECOR_RESET 0x80
-#define ECOR_LEVEL_IRQ 0x40
-#define ECOR_WR_ATTRIB 0x04
-#define ECOR_ENABLE 0x01
-
-#define ECSR 0x8002
-#define ECSR_IOIS8 0x20
-#define ECSR_PWRDWN 0x04
-#define ECSR_INT 0x02
-#define SMC_IO_SHIFT 2
-#define NCR_0 (*((volatile u_char *)(0x100000a0)))
-#define NCR_ENET_OSC_EN (1<<3)
-
-static inline u8
-readb(volatile u8 * p)
-{
- return *p;
-}
-
-static inline void
-writeb(u8 v, volatile u8 * p)
-{
- *p = v;
-}
-
-static void
-smc_init(void)
-{
- u8 ecor;
- u8 ecsr;
- volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25));
-
- NCR_0 |= NCR_ENET_OSC_EN;
- udelay(100);
-
- ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
- writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
- udelay(100);
-
- /*
- * The device will ignore all writes to the enable bit while
- * reset is asserted, even if the reset bit is cleared in the
- * same write. Must clear reset first, then enable the device.
- */
- writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
- writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
-
- /*
- * Set the appropriate byte/word mode.
- */
- ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
- ecsr |= ECSR_IOIS8;
- writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
- udelay(100);
-}
-
-static void
-neponset_init(void)
-{
- smc_init();
-}
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
- gd->bd->bi_boot_params = 0xc0000100;
-
- neponset_init();
-
- return 0;
-}
-
-int
-dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/assabet/config.mk b/board/assabet/config.mk
deleted file mode 100644
index d9866a0..0000000
--- a/board/assabet/config.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# SA-1110 based Intel Assabet board
-#
-# The Intel Assabet 1 bank of 32 MiB SDRAM
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
diff --git a/board/assabet/setup.S b/board/assabet/setup.S
deleted file mode 100644
index 56ea0dd..0000000
--- a/board/assabet/setup.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/*-----------------------------------------------------------------------
- * Board defines:
- */
-
-#define MDCNFG 0x00
-#define MDCAS00 0x04
-#define MDCAS01 0x08
-#define MDCAS02 0x0C
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-#define MDREFR 0x1C
-#define MDCAS20 0x20
-#define MDCAS21 0x24
-#define MDCAS22 0x28
-#define MSC2 0x2C
-#define SMCNFG 0x30
-
-#define ASSABET_BCR (0x12000000)
-#define ASSABET_BCR_DB1110 (0x00a07490 | (0<<16) | (0<<17))
-#define ASSABET_SCR_nNEPONSET (1 << 9)
-#define NEPONSET_LEDS (0x10000010)
-
-
-/*-----------------------------------------------------------------------
- * Setup parameters for the board:
- */
-
-
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-
-mdcnfg: .long 0x72547254
-mdcas00: .long 0xaaaaaa7f
-mdcas01: .long 0xaaaaaaaa
-mdcas02: .long 0xaaaaaaaa
-msc0: .long 0x4b384370
-msc1: .long 0x22212419
-mecr: .long 0x994a994a
-mdrefr: .long 0x04340327
-mdcas20: .long 0xaaaaaa7f
-mdcas21: .long 0xaaaaaaaa
-mdcas22: .long 0xaaaaaaaa
-msc2: .long 0x42196669
-smcnfg: .long 0x00000000
-
-BCR: .long ASSABET_BCR
-BCR_DB1110: .long ASSABET_BCR_DB1110
-LEDS: .long NEPONSET_LEDS
-
-
- .globl lowlevel_init
-lowlevel_init:
-
- /* Setting up the memory and stuff */
-
- ldr r0, MEM_BASE
- ldr r1, mdcas00
- str r1, [r0, #MDCAS00]
- ldr r1, mdcas01
- str r1, [r0, #MDCAS01]
- ldr r1, mdcas02
- str r1, [r0, #MDCAS02]
- ldr r1, mdcas20
- str r1, [r0, #MDCAS20]
- ldr r1, mdcas21
- str r1, [r0, #MDCAS21]
- ldr r1, mdcas22
- str r1, [r0, #MDCAS22]
- ldr r1, mdrefr
- str r1, [r0, #MDREFR]
- ldr r1, mecr
- str r1, [r0, #MECR]
- ldr r1, msc0
- str r1, [r0, #MSC0]
- ldr r1, msc1
- str r1, [r0, #MSC1]
- ldr r1, msc2
- str r1, [r0, #MSC2]
- ldr r1, smcnfg
- str r1, [r0, #SMCNFG]
-
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
-
- /* Load something to activate bank */
- ldr r2, MEM_START
-.rept 8
- ldr r3, [r2]
-.endr
-
- /* Enable SDRAM */
- orr r1, r1, #0x00000001
- str r1, [r0, #MDCNFG]
-
- ldr r1, BCR
- ldr r2, BCR_DB1110
- str r2, [r1]
-
- ldr r1, LEDS
- mov r0, #0x3
- str r0, [r1]
-
- /* All done... */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 4522ea7..81f451b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-assabet arm sa1100
dnp1110 arm sa1100
gcplus arm sa1100
jornada arm sa1100
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4cb727f..e2b2596 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
deleted file mode 100644
index dc9bd88..0000000
--- a/include/configs/assabet.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * Configuation settings for the Intel Assabet board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
-#define CONFIG_ASSABET 1 /* on an Intel Assabet Board */
-
-#undef CONFIG_USE_IRQ
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
-#define CONFIG_LAN91C96_BASE 0x18000000
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on Intel Assabet */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
-#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Intel Assabet # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
-
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_RAMSTART
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
-#undef CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-#define CONFIG_ENV_IN_OWN_SECTOR 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 02/52] ARM: remove broken "dnp1110" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 01/52] ARM: remove broken "assabet" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 03/52] ARM: remove broken "gcplus" board Wolfgang Denk
` (51 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Alex Z?pke <azu@sysgo.de>
---
MAINTAINERS | 1 -
board/dnp1110/Makefile | 51 -----
board/dnp1110/config.mk | 17 --
board/dnp1110/dnp1110.c | 67 -------
board/dnp1110/flash.c | 424 -----------------------------------------
board/dnp1110/lowlevel_init.S | 135 -------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/dnp1110.h | 162 ----------------
9 files changed, 1 insertions(+), 858 deletions(-)
delete mode 100644 board/dnp1110/Makefile
delete mode 100644 board/dnp1110/config.mk
delete mode 100644 board/dnp1110/dnp1110.c
delete mode 100644 board/dnp1110/flash.c
delete mode 100644 board/dnp1110/lowlevel_init.S
delete mode 100644 include/configs/dnp1110.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3bcfc32..5ead405 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -911,7 +911,6 @@ Richard Woodruff <r-woodruff2@ti.com>
Alex Z?pke <azu@sysgo.de>
lart SA1100
- dnp1110 SA1110
Syed Mohammed Khasim <sm.khasim@gmail.com>
Sughosh Ganu <urwithsughosh@gmail.com>
diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile
deleted file mode 100644
index 8a86c0f..0000000
--- a/board/dnp1110/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := dnp1110.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/dnp1110/config.mk b/board/dnp1110/config.mk
deleted file mode 100644
index ccf8277..0000000
--- a/board/dnp1110/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# DNP/1110 board with SA1100 cpu
-#
-# http://www.dilnetpc.com
-#
-
-#
-# DILNETPC has 1 banks of 32 MB DRAM
-#
-# c000'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c1f8'0000, the upper 1 MB of the first (only) bank
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1f80000
diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c
deleted file mode 100644
index c215f5f..0000000
--- a/board/dnp1110/dnp1110.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of DNP1110-Board */
- gd->bd->bi_arch_number = MACH_TYPE_DNP1110;
-
- /* flash vpp on */
- PPDR |= 0x80; /* assumes LCD controller is off */
- PPSR |= 0x80;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/dnp1110/flash.c b/board/dnp1110/flash.c
deleted file mode 100644
index c81abc5..0000000
--- a/board/dnp1110/flash.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel(void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- switch (i)
- {
- case 0:
- flash_get_size((FPW *)PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n"); break;
- default: printf ("Unknown Chip Type\n"); break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
- volatile FPW value;
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW)0x00AA00AA;
- addr[0x2AAA] = (FPW)0x00550055;
- addr[0x5555] = (FPW)0x00900090;
-
- mb();
- value = addr[0];
-
- switch (value) {
-
- case (FPW)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW)0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb();
- value = addr[1]; /* device ID */
- switch (value) {
-
- case (FPW)INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW)0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *)(info->start[sect]);
- FPW status;
-
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- *addr = (FPW)0x00500050; /* clear status register */
- *addr = (FPW)0x00200020; /* erase setup */
- *addr = (FPW)0x00D000D0; /* erase confirm */
-
- while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW)0x00B000B0; /* suspend erase */
- *addr = (FPW)0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = (FPW)0x00500050; /* clear status register cmd. */
- *addr = (FPW)0x00FF00FF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<port_width && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i=0; i<port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800)
- {
- spin_wheel();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_data(info, wp, SWAP(data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *)dest;
- ulong status;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf("not erased@%08lx (%x)\n",(ulong)addr,*addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = (FPW)0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW)0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW)0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-void inline
-spin_wheel(void)
-{
- static int p=0;
- static char w[] = "\\/-";
-
- printf("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/dnp1110/lowlevel_init.S b/board/dnp1110/lowlevel_init.S
deleted file mode 100644
index 7730be3..0000000
--- a/board/dnp1110/lowlevel_init.S
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/* some parameters for the board */
-
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-
-#define MDCNFG 0x00
-#define MDCAS00 0x04 /* CAS waveform rotate reg 0 */
-#define MDCAS01 0x08 /* CAS waveform rotate reg 1 bank */
-#define MDCAS02 0x0C /* CAS waveform rotate reg 2 bank */
-#define MDREFR 0x1C /* DRAM refresh control reg */
-#define MDCAS20 0x20 /* CAS waveform rotate reg 0 bank */
-#define MDCAS21 0x24 /* CAS waveform rotate reg 1 bank */
-#define MDCAS22 0x28 /* CAS waveform rotate reg 2 bank */
-#define MECR 0x18 /* Expansion memory (PCMCIA) bus configuration register */
-#define MSC0 0x10 /* static memory control reg 0 */
-#define MSC1 0x14 /* static memory control reg 1 */
-#define MSC2 0x2C /* static memory control reg 2 */
-#define SMCNFG 0x30 /* SMROM configuration reg */
-
-mdcas00: .long 0x5555557F
-mdcas01: .long 0x55555555
-mdcas02: .long 0x55555555
-mdcas20: .long 0x5555557F
-mdcas21: .long 0x55555555
-mdcas22: .long 0x55555555
-mdcnfg: .long 0x0000B25C
-mdrefr: .long 0x007000C1
-mecr: .long 0x10841084
-msc0: .long 0x00004774
-msc1: .long 0x00000000
-msc2: .long 0x00000000
-smcnfg: .long 0x00000000
-
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
-
- ldr r0, MEM_BASE
-
- /* Set up the DRAM */
-
- /* MDCAS00 */
- ldr r1, mdcas00
- str r1, [r0, #MDCAS00]
-
- /* MDCAS01 */
- ldr r1, mdcas01
- str r1, [r0, #MDCAS01]
-
- /* MDCAS02 */
- ldr r1, mdcas02
- str r1, [r0, #MDCAS02]
-
- /* MDCAS20 */
- ldr r1, mdcas20
- str r1, [r0, #MDCAS20]
-
- /* MDCAS21 */
- ldr r1, mdcas21
- str r1, [r0, #MDCAS21]
-
- /* MDCAS22 */
- ldr r1, mdcas22
- str r1, [r0, #MDCAS22]
-
- /* MDREFR */
- ldr r1, mdrefr
- str r1, [r0, #MDREFR]
-
- /* Set up PCMCIA space */
- ldr r1, mecr
- str r1, [r0, #MECR]
-
- /* Setup the flash memory and other */
- ldr r1, msc0
- str r1, [r0, #MSC0]
-
- ldr r1, msc1
- str r1, [r0, #MSC1]
-
- ldr r1, msc2
- str r1, [r0, #MSC2]
-
- ldr r1, smcnfg
- str r1, [r0, #SMCNFG]
-
- /* MDCNFG */
- ldr r1, mdcnfg
- bic r1, r1, #0x00000001
- str r1, [r0, #MDCNFG]
-
- /* Load something to activate bank */
- ldr r2, MEM_START
-.rept 8
- ldr r1, [r2]
-.endr
-
- /* MDCNFG */
- ldr r1, mdcnfg
- orr r1, r1, #0x00000001
- str r1, [r0, #MDCNFG]
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 81f451b..0ffc88c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-dnp1110 arm sa1100
gcplus arm sa1100
jornada arm sa1100
lart arm sa1100
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e2b2596..9b2b0ff 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+dnp1110 arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
deleted file mode 100644
index 7d79d57..0000000
--- a/include/configs/dnp1110.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Rolf Offermanns <rof@sysgo.de>
- *
- * Configuation settings for the SSV DNP1110 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA1110 CPU */
-#define CONFIG_DNP1110 1 /* on an DNP/1110 Board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x20000300
-
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
-#define CONFIG_ETHADDR 02:80:ad:20:31:b8
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 172.22.2.23
-#define CONFIG_SERVERIP 172.22.2.22
-#define CONFIG_BOOTFILE "dnp1110"
-#define CONFIG_BOOTCOMMAND "tftp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "DNP1110 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0200000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 03/52] ARM: remove broken "gcplus" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 01/52] ARM: remove broken "assabet" board Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 02/52] ARM: remove broken "dnp1110" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board Wolfgang Denk
` (50 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: George G. Davis <gdavis@mvista.com>
---
MAINTAINERS | 4 -
board/gcplus/Makefile | 53 -----
board/gcplus/config.mk | 13 --
board/gcplus/flash.c | 440 ------------------------------------------
board/gcplus/gcplus.c | 82 --------
board/gcplus/lowlevel_init.S | 77 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/gcplus.h | 185 ------------------
9 files changed, 1 insertions(+), 855 deletions(-)
delete mode 100644 board/gcplus/Makefile
delete mode 100644 board/gcplus/config.mk
delete mode 100644 board/gcplus/flash.c
delete mode 100644 board/gcplus/gcplus.c
delete mode 100644 board/gcplus/lowlevel_init.S
delete mode 100644 include/configs/gcplus.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ead405..ce0f57e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -623,10 +623,6 @@ Eric Cooper <ecc@cmu.edu>
dockstar ARM926EJS (Kirkwood SoC)
-George G. Davis <gdavis@mvista.com>
-
- gcplus SA1100
-
Wolfgang Denk <wd@denx.de>
imx27lite i.MX27
qong i.MX31
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
deleted file mode 100644
index e62aa1b..0000000
--- a/board/gcplus/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# 2003 (c) MontaVista Software, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := gcplus.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/gcplus/config.mk b/board/gcplus/config.mk
deleted file mode 100644
index a9bd3ff..0000000
--- a/board/gcplus/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# ADS GCPlus board with SA1110 cpu
-#
-# The ADS GCPlus has 2 banks of 16 MiB SDRAM
-#
-# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
-# at c020'0000 and then move ourself to c8f0'0000. Basically, just
-# install the U-Boot binary as you would the Linux zImage and then
-# reap the benfits of more convenient Linux development cycles, i.e.
-# bootp;tftp;bootm, repeat, etc.,.
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc8f00000
diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c
deleted file mode 100644
index 8511582..0000000
--- a/board/gcplus/flash.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * 2003 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPW * addr, flash_info_t * info);
-static int write_data(flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-void inline spin_wheel(void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long
-flash_init(void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info(flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf("INTEL ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf("28F128J3A\n");
- break;
- case FLASH_28F640J5:
- printf("28F640J5\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong
-flash_get_size(FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb();
- value = addr[1]; /* device ID */
- switch (value) {
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* => 16 MB */
- case (FPW) INTEL_ID_28F640J5:
- info->flash_id += FLASH_28F640J5;
- info->sector_count = 64;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = (FPW) 0x00500050; /* clear status register cmd. */
- *addr = (FPW) 0x00FF00FF; /* resest to read mode */
-
- printf(" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int
-write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data(info, wp, SWAP(data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_data(flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf("not erased@%08lX (%lX)\n", (ulong) addr, *addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-void inline
-spin_wheel(void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c
deleted file mode 100644
index 71607f2..0000000
--- a/board/gcplus/gcplus.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2003-2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT;
-
- gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
-
- /* Most of the ADS GCPlus I/O is connected to Static nCS2.
- * So I'm brute forcing nCS2 timiming here for worst case.
- */
- MSC1 &= ~0xFFFF;
- MSC1 |= 0x8649;
-
- /* Nothing is connected to Static nCS4 or nCS5. But I'm using
- * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high
- * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm
- * paranoid and lack decent tools to alleviate my fear. I sure
- * do wish I had a logic analyzer. : (
- */
-
- MSC2 = 0xfff9fff9;
-
- return 0;
-}
-
-int
-dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/gcplus/lowlevel_init.S b/board/gcplus/lowlevel_init.S
deleted file mode 100644
index f292c4d..0000000
--- a/board/gcplus/lowlevel_init.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- * 2003-2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
- .globl lowlevel_init
-lowlevel_init:
- /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us.
- * However the darn thing leaves the MMU enabled before handing control
- * over to us. So we need to disable the MMU and we use lowlevel_init
- * to do it.
- */
-
-@ The following code segment was borrowed with gratitude from:
-@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S
-
- @ Data cache might be active.
- @ Be sure to flush kernel binary out of the cache,
- @ whatever state it is, before it is turned off.
- @ This is done by fetching through currently executed
- @ memory to be sure we hit the same cache.
- bic r2, pc, #0x1f
- add r3, r2, #0x4000 @ 16 kb is quite enough...
-1: ldr r0, [r2], #32
- teq r2, r3
- bne 1b
- mcr p15, 0, r0, c7, c10, 4 @ drain WB
- mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches
-
- @ disabling MMU and caches
- mrc p15, 0, r0, c1, c0, 0 @ read control reg
- bic r0, r0, #0x0d @ clear WB, DC, MMU
- bic r0, r0, #0x1000 @ clear Icache
- mcr p15, 0, r0, c1, c0, 0
-
- nop
- nop
- nop
- nop
- nop
-
- b 2f
-2:
- nop
- nop
- nop
- nop
- nop
-
-
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 0ffc88c..0f5182e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-gcplus arm sa1100
jornada arm sa1100
lart arm sa1100
shannon arm sa1100
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 9b2b0ff..7d96f99 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
dnp1110 arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
deleted file mode 100644
index 9412daa..0000000
--- a/include/configs/gcplus.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2003-2004 (c) MontaVista Software, Inc.
- *
- * Configuation settings for the ADS GraphicsClient+ board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
- * We don't actually init RAM in this case since we're using U-Boot as
- * an secondary boot loader during Linux kernel development and testing,
- * e.g. bootp/tftp download of the kernel is a far more convenient
- * when testing new kernels on this target. However the ADS GCPlus Linux
- * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
- * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem.
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
-#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
-#define CONFIG_LAN91C96_BASE 0x100e0000
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on ADS GCPlus */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m at 0(zImage),3m at 1m(ramdisk.gz),12m at 4m(userfs) root=/dev/nfs ip=bootp"
-#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "ADS GCPlus # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-#define PHYS_SDRAM_2 0xc8000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */
-
-
-#define PHYS_FLASH_1 0x08000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
-#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#if 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-#else
-/* REVISIT: This doesn't work on ADS GCPlus just yet: */
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
-/*#define CONFIG_SYS_FLASH_PROTECTION 1 /--* hardware flash protection */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#endif
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (2 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 03/52] ARM: remove broken "gcplus" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-18 11:20 ` Kristoffer Ericson
2011-07-17 22:16 ` [U-Boot] [PATCH 05/52] ARM: remove broken "lart" board Wolfgang Denk
` (49 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
---
MAINTAINERS | 4 -
board/jornada/Makefile | 53 -----------
board/jornada/jornada.c | 60 -------------
board/jornada/setup.S | 210 ---------------------------------------------
board/jornada/u-boot.lds | 58 -------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/jornada.h | 153 ---------------------------------
8 files changed, 1 insertions(+), 539 deletions(-)
delete mode 100644 board/jornada/Makefile
delete mode 100644 board/jornada/jornada.c
delete mode 100644 board/jornada/setup.S
delete mode 100644 board/jornada/u-boot.lds
delete mode 100644 include/configs/jornada.h
diff --git a/MAINTAINERS b/MAINTAINERS
index ce0f57e..af641d2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -631,10 +631,6 @@ Thomas Elste <info@elste.org>
modnet50 ARM720T (NET+50)
-Kristoffer Ericson <kristoffer.ericson@gmail.com>
-
- jornada SA1110
-
Fabio Estevam <fabio.estevam@freescale.com>
mx31pdk i.MX31
diff --git a/board/jornada/Makefile b/board/jornada/Makefile
deleted file mode 100644
index e017692..0000000
--- a/board/jornada/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# 2004 (c) MontaVista Software, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := jornada.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/jornada/jornada.c b/board/jornada/jornada.c
deleted file mode 100644
index fab1068..0000000
--- a/board/jornada/jornada.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_JORNADA720;
- gd->bd->bi_boot_params = 0xc0000100;
-
-
- /*
- * Turn on flashing.
- * Would be nice to have some protection but
- * that would have to be implemented in the
- * flash init function, which isnt possible yet.
- */
- PPSR |= (1 << 7);
- PPDR |= (1 << 7);
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
- return (0);
-}
diff --git a/board/jornada/setup.S b/board/jornada/setup.S
deleted file mode 100644
index cdf5f54..0000000
--- a/board/jornada/setup.S
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/*-----------------------------------------------------------------------
- * Board defines:
- */
-
-#define MDCNFG 0x00
-#define MDCAS00 0x04
-#define MDCAS01 0x08
-#define MDCAS02 0x0C
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-#define MDREFR 0x1C
-#define MDCAS20 0x20
-#define MDCAS21 0x24
-#define MDCAS22 0x28
-#define MSC2 0x2C
-#define SMCNFG 0x30
-
-#define GPDR 0x04
-#define GPSR 0x08
-#define GPCR 0x0C
-#define GAFR 0x1C
-
-#define PPDR 0x00
-#define PPSR 0x04
-#define PPAR 0x08
-
-#define MDREFR_TRASR(n_) (n_ & (0x0000000f))
-#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4)
-#define MDREFR_K0DB2 (1 << 18)
-#define MDREFR_K1DB2 (1 << 22)
-#define MDREFR_K2DB2 (1 << 26)
-
-#define MDREFR_K0RUN (1 << 17)
-#define MDREFR_K1RUN (1 << 21)
-#define MDREFR_K2RUN (1 << 25)
-
-#define MDREFR_SLFRSH (1 << 31)
-#define MDREFR_E1PIN (1 << 20)
-
-#define PSSR 0x04
-#define PSSR_DH 0x00000008
-#define POSR 0x08
-#define RCSR 0x04
-
-/*-----------------------------------------------------------------------
- * Setup parameters for the board:
- */
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-PWR_BASE: .word 0x90020000
-RST_BASE: .long 0x90030000
-PPC_BASE: .long 0x90060000
-GPIO_BASE: .long 0x90040000
-IC_BASE: .word 0x90050000
-
-cpuspeed: .word 0xa0
-/* calculated from old blob bootloader */
-mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */
-mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */
-mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */
-mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */
-msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */
-msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */
-mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */
-mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */
-mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */
-mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */
-mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */
-msc2: .long 0x201d2959 /* msc2 0x201d2959 */
-smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */
-
-pin_set_out: .long 0x37ff70
-pin_set_dir: .long 0x11480
-
-gpdr_set: .long 0x0B3A0900
-gpsr_set: .long 0x02100800
-gpcr_set: .long 0x092A0100
-gafr_set: .long 0x08600000
-
-.globl lowlevel_init
-lowlevel_init:
-
-
- /* this is required for flashing */
- ldr r0, PPC_BASE
- ldr r1, pin_set_out
- str r1, [r0, #PPSR]
- ldr r1, pin_set_dir
- str r1, [r0, #PPDR]
-
- /* Setting up the memory and stuff */
- /***********************************/
-
- ldr r0, MEM_BASE
-
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
- ldr r1, mdcas00
- str r1, [r0, #MDCAS00]
- ldr r1, mdcas01
- str r1, [r0, #MDCAS01]
- ldr r1, mdcas02
- str r1, [r0, #MDCAS02]
- ldr r1, mdcas20
- str r1, [r0, #MDCAS20]
- ldr r1, mdcas21
- str r1, [r0, #MDCAS21]
- ldr r1, mdcas22
- str r1, [r0, #MDCAS22]
-
- /* clear kxDB2 */
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_K0DB2
- bic r2, r2, #MDREFR_K1DB2
- bic r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_TRASR(7)
-
- mov r4, #0x2000
- spin: subs r4, r4, #1
- bne spin
-
- ldr r1, PWR_BASE
- mov r2, #PSSR_DH
- str r2, [r1, #PSSR]
-
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_K0DB2
- bic r2, r2, #MDREFR_K1DB2
- bic r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_TRASR(7)
- orr r2, r2, #MDREFR_DRI(12)
- orr r2, r2, #MDREFR_K0DB2
- orr r2, r2, #MDREFR_K1DB2
- orr r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_K0RUN
- orr r2, r2, #MDREFR_K1RUN
- orr r2, r2, #MDREFR_K2RUN
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_SLFRSH
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_E1PIN
- str r2, [r0, #MDREFR]
-
- ldr r2, MEM_START
-.rept 8
- ldr r3, [r2]
-.endr
-
- ldr r2, [r0, #MDCNFG]
- orr r2, r2, #0x00000003
- orr r2, r2, #0x00030000
- str r2, [r0, #MDCNFG]
-
- ldr r1, msc0
- str r1, [r0, #MSC0]
- ldr r1, msc1
- str r1, [r0, #MSC1]
- ldr r1, msc2
- str r1, [r0, #MSC2]
- ldr r1, smcnfg
- str r1, [r0, #SMCNFG]
- ldr r1, mecr
- str r1, [r0, #MECR]
-
- mov pc, lr
diff --git a/board/jornada/u-boot.lds b/board/jornada/u-boot.lds
deleted file mode 100644
index c75b21f..0000000
--- a/board/jornada/u-boot.lds
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/sa1100/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- __bss_end__ = .;
-}
diff --git a/boards.cfg b/boards.cfg
index 0f5182e..d2c3574 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-jornada arm sa1100
lart arm sa1100
shannon arm sa1100
atngw100 avr32 at32ap - atmel at32ap700x
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7d96f99..851754c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
dnp1110 arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
diff --git a/include/configs/jornada.h b/include/configs/jornada.h
deleted file mode 100644
index 84ad2d8..0000000
--- a/include/configs/jornada.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright 2010 (C)
- * Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA110 CPU */
-#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */
-#define CONFIG_SYS_FLASH_PROTECTION 1
-
-#define CONFIG_SYS_TEXT_BASE 0xC1F00000
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_USE_IRQ
-
-/* Console setting */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL 1
-#define CONFIG_SERIAL3 1 /* we use serial 3 */
-#define CONFIG_BAUDRATE 19200
-#define CONFIG_LOADS_ECHO 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1"
-#define CONFIG_BOOTCOMMAND "run boot_kernel"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_SYS_LOAD_ADDR 0xc0000000
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "HP Jornada# "
-#define CONFIG_SYS_CBSIZE 256 /* console buffsize */
-#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */
-#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_ERASE_TOUT (4096)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (4096)
-#define CONFIG_SYS_FLASH_INCREMENT 0x02000000
-#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 260
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_FLASH_SHOW_PROGRESS 1
-
-/* Environment */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x00040000
-#define CONFIG_ENV_OFFSET 0x00040000
-#define CONFIG_ENV_SIZE 0x00040000
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- Monitor - 0x00000000 - 0x00040000 (256kb)
- Environment - 0x00040000 - 0x00080000 (256kb)
- Kernel - 0x00080000 - 0x00380000 (3mb)
- Rootfs - 0x00380000 - 0x........ (rest)
-*/
-
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_INIT_SP_ADDR 0x0
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=jornada7xx-0"
-#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\
- "3m(kernel),-(user);"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "flash_kernel=protect off all; " \
- "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \
- "flash_uboot=protect off all; " \
- "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \
- "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0"
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board
2011-07-17 22:16 ` [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board Wolfgang Denk
@ 2011-07-18 11:20 ` Kristoffer Ericson
2011-07-18 12:11 ` Wolfgang Denk
0 siblings, 1 reply; 90+ messages in thread
From: Kristoffer Ericson @ 2011-07-18 11:20 UTC (permalink / raw)
To: u-boot
Please dont. I have the patches here, will send them during the week.
Best wishes
Kristoffer
On Mon, Jul 18, 2011 at 12:16:32AM +0200, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
> ---
> MAINTAINERS | 4 -
> board/jornada/Makefile | 53 -----------
> board/jornada/jornada.c | 60 -------------
> board/jornada/setup.S | 210 ---------------------------------------------
> board/jornada/u-boot.lds | 58 -------------
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> include/configs/jornada.h | 153 ---------------------------------
> 8 files changed, 1 insertions(+), 539 deletions(-)
> delete mode 100644 board/jornada/Makefile
> delete mode 100644 board/jornada/jornada.c
> delete mode 100644 board/jornada/setup.S
> delete mode 100644 board/jornada/u-boot.lds
> delete mode 100644 include/configs/jornada.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ce0f57e..af641d2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -631,10 +631,6 @@ Thomas Elste <info@elste.org>
>
> modnet50 ARM720T (NET+50)
>
> -Kristoffer Ericson <kristoffer.ericson@gmail.com>
> -
> - jornada SA1110
> -
> Fabio Estevam <fabio.estevam@freescale.com>
>
> mx31pdk i.MX31
> diff --git a/board/jornada/Makefile b/board/jornada/Makefile
> deleted file mode 100644
> index e017692..0000000
> --- a/board/jornada/Makefile
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -#
> -# (C) Copyright 2000-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# 2004 (c) MontaVista Software, Inc.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB = $(obj)lib$(BOARD).o
> -
> -COBJS := jornada.o
> -SOBJS := setup.o
> -
> -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS := $(addprefix $(obj),$(COBJS))
> -SOBJS := $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): $(obj).depend $(OBJS) $(SOBJS)
> - $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - rm -f $(SOBJS) $(OBJS)
> -
> -distclean: clean
> - rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/jornada/jornada.c b/board/jornada/jornada.c
> deleted file mode 100644
> index fab1068..0000000
> --- a/board/jornada/jornada.c
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -/*
> - * (C) Copyright 2002
> - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> - * Marius Groeger <mgroeger@sysgo.de>
> - *
> - * 2004 (c) MontaVista Software, Inc.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <SA-1100.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -/* ------------------------------------------------------------------------- */
> -
> -int board_init(void)
> -{
> - gd->bd->bi_arch_number = MACH_TYPE_JORNADA720;
> - gd->bd->bi_boot_params = 0xc0000100;
> -
> -
> - /*
> - * Turn on flashing.
> - * Would be nice to have some protection but
> - * that would have to be implemented in the
> - * flash init function, which isnt possible yet.
> - */
> - PPSR |= (1 << 7);
> - PPDR |= (1 << 7);
> -
> - return 0;
> -}
> -
> -int dram_init(void)
> -{
> - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> - gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> -
> - return (0);
> -}
> diff --git a/board/jornada/setup.S b/board/jornada/setup.S
> deleted file mode 100644
> index cdf5f54..0000000
> --- a/board/jornada/setup.S
> +++ /dev/null
> @@ -1,210 +0,0 @@
> -/*
> - * Memory Setup stuff - taken from blob memsetup.S
> - *
> - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
> - * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
> - * 2004 (c) MontaVista Software, Inc.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -
> -#include "config.h"
> -#include "version.h"
> -
> -
> -/*-----------------------------------------------------------------------
> - * Board defines:
> - */
> -
> -#define MDCNFG 0x00
> -#define MDCAS00 0x04
> -#define MDCAS01 0x08
> -#define MDCAS02 0x0C
> -#define MSC0 0x10
> -#define MSC1 0x14
> -#define MECR 0x18
> -#define MDREFR 0x1C
> -#define MDCAS20 0x20
> -#define MDCAS21 0x24
> -#define MDCAS22 0x28
> -#define MSC2 0x2C
> -#define SMCNFG 0x30
> -
> -#define GPDR 0x04
> -#define GPSR 0x08
> -#define GPCR 0x0C
> -#define GAFR 0x1C
> -
> -#define PPDR 0x00
> -#define PPSR 0x04
> -#define PPAR 0x08
> -
> -#define MDREFR_TRASR(n_) (n_ & (0x0000000f))
> -#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4)
> -#define MDREFR_K0DB2 (1 << 18)
> -#define MDREFR_K1DB2 (1 << 22)
> -#define MDREFR_K2DB2 (1 << 26)
> -
> -#define MDREFR_K0RUN (1 << 17)
> -#define MDREFR_K1RUN (1 << 21)
> -#define MDREFR_K2RUN (1 << 25)
> -
> -#define MDREFR_SLFRSH (1 << 31)
> -#define MDREFR_E1PIN (1 << 20)
> -
> -#define PSSR 0x04
> -#define PSSR_DH 0x00000008
> -#define POSR 0x08
> -#define RCSR 0x04
> -
> -/*-----------------------------------------------------------------------
> - * Setup parameters for the board:
> - */
> -MEM_BASE: .long 0xa0000000
> -MEM_START: .long 0xc0000000
> -PWR_BASE: .word 0x90020000
> -RST_BASE: .long 0x90030000
> -PPC_BASE: .long 0x90060000
> -GPIO_BASE: .long 0x90040000
> -IC_BASE: .word 0x90050000
> -
> -cpuspeed: .word 0xa0
> -/* calculated from old blob bootloader */
> -mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */
> -mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */
> -mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */
> -mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */
> -msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */
> -msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */
> -mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */
> -mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */
> -mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */
> -mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */
> -mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */
> -msc2: .long 0x201d2959 /* msc2 0x201d2959 */
> -smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */
> -
> -pin_set_out: .long 0x37ff70
> -pin_set_dir: .long 0x11480
> -
> -gpdr_set: .long 0x0B3A0900
> -gpsr_set: .long 0x02100800
> -gpcr_set: .long 0x092A0100
> -gafr_set: .long 0x08600000
> -
> -.globl lowlevel_init
> -lowlevel_init:
> -
> -
> - /* this is required for flashing */
> - ldr r0, PPC_BASE
> - ldr r1, pin_set_out
> - str r1, [r0, #PPSR]
> - ldr r1, pin_set_dir
> - str r1, [r0, #PPDR]
> -
> - /* Setting up the memory and stuff */
> - /***********************************/
> -
> - ldr r0, MEM_BASE
> -
> - ldr r1, mdcnfg
> - str r1, [r0, #MDCNFG]
> - ldr r1, mdcas00
> - str r1, [r0, #MDCAS00]
> - ldr r1, mdcas01
> - str r1, [r0, #MDCAS01]
> - ldr r1, mdcas02
> - str r1, [r0, #MDCAS02]
> - ldr r1, mdcas20
> - str r1, [r0, #MDCAS20]
> - ldr r1, mdcas21
> - str r1, [r0, #MDCAS21]
> - ldr r1, mdcas22
> - str r1, [r0, #MDCAS22]
> -
> - /* clear kxDB2 */
> - ldr r2, [r0, #MDREFR]
> - bic r2, r2, #MDREFR_K0DB2
> - bic r2, r2, #MDREFR_K1DB2
> - bic r2, r2, #MDREFR_K2DB2
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, [r0, #MDREFR]
> - orr r2, r2, #MDREFR_TRASR(7)
> -
> - mov r4, #0x2000
> - spin: subs r4, r4, #1
> - bne spin
> -
> - ldr r1, PWR_BASE
> - mov r2, #PSSR_DH
> - str r2, [r1, #PSSR]
> -
> - ldr r2, [r0, #MDREFR]
> - bic r2, r2, #MDREFR_K0DB2
> - bic r2, r2, #MDREFR_K1DB2
> - bic r2, r2, #MDREFR_K2DB2
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, [r0, #MDREFR]
> - orr r2, r2, #MDREFR_TRASR(7)
> - orr r2, r2, #MDREFR_DRI(12)
> - orr r2, r2, #MDREFR_K0DB2
> - orr r2, r2, #MDREFR_K1DB2
> - orr r2, r2, #MDREFR_K2DB2
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, [r0, #MDREFR]
> - orr r2, r2, #MDREFR_K0RUN
> - orr r2, r2, #MDREFR_K1RUN
> - orr r2, r2, #MDREFR_K2RUN
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, [r0, #MDREFR]
> - bic r2, r2, #MDREFR_SLFRSH
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, [r0, #MDREFR]
> - orr r2, r2, #MDREFR_E1PIN
> - str r2, [r0, #MDREFR]
> -
> - ldr r2, MEM_START
> -.rept 8
> - ldr r3, [r2]
> -.endr
> -
> - ldr r2, [r0, #MDCNFG]
> - orr r2, r2, #0x00000003
> - orr r2, r2, #0x00030000
> - str r2, [r0, #MDCNFG]
> -
> - ldr r1, msc0
> - str r1, [r0, #MSC0]
> - ldr r1, msc1
> - str r1, [r0, #MSC1]
> - ldr r1, msc2
> - str r1, [r0, #MSC2]
> - ldr r1, smcnfg
> - str r1, [r0, #SMCNFG]
> - ldr r1, mecr
> - str r1, [r0, #MECR]
> -
> - mov pc, lr
> diff --git a/board/jornada/u-boot.lds b/board/jornada/u-boot.lds
> deleted file mode 100644
> index c75b21f..0000000
> --- a/board/jornada/u-boot.lds
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -/*
> - * (C) Copyright 2000-2004
> - * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> - * 2004 (c) MontaVista Software, Inc.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> -OUTPUT_ARCH(arm)
> -ENTRY(_start)
> -SECTIONS
> -{
> - . = 0x00000000;
> -
> - . = ALIGN(4);
> - .text :
> - {
> - cpu/sa1100/start.o (.text)
> - *(.text)
> - }
> -
> - . = ALIGN(4);
> - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> -
> - . = ALIGN(4);
> - .data : { *(.data) }
> -
> - . = ALIGN(4);
> - .got : { *(.got) }
> -
> -
> - . = .;
> - __u_boot_cmd_start = .;
> - .u_boot_cmd : { *(.u_boot_cmd) }
> - __u_boot_cmd_end = .;
> -
> - . = ALIGN(4);
> - __bss_start = .;
> - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
> - __bss_end__ = .;
> -}
> diff --git a/boards.cfg b/boards.cfg
> index 0f5182e..d2c3574 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -202,7 +202,6 @@ xm250 arm pxa
> zipitz2 arm pxa
> zylonite arm pxa
> B2 arm s3c44b0 - dave
> -jornada arm sa1100
> lart arm sa1100
> shannon arm sa1100
> atngw100 avr32 at32ap - atmel at32ap700x
> diff --git a/doc/README.scrapyard b/doc/README.scrapyard
> index 7d96f99..851754c 100644
> --- a/doc/README.scrapyard
> +++ b/doc/README.scrapyard
> @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
>
> Board Arch CPU removed Commit last known maintainer/contact
> =============================================================================
> +jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
> gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
> dnp1110 arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
> assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
> diff --git a/include/configs/jornada.h b/include/configs/jornada.h
> deleted file mode 100644
> index 84ad2d8..0000000
> --- a/include/configs/jornada.h
> +++ /dev/null
> @@ -1,153 +0,0 @@
> -/*
> - * Copyright 2010 (C)
> - * Kristoffer Ericson <kristoffer.ericson@gmail.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Configuration Options
> - * (easy to change)
> - */
> -#define CONFIG_SA1110 1 /* This is an SA110 CPU */
> -#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */
> -#define CONFIG_SYS_FLASH_PROTECTION 1
> -
> -#define CONFIG_SYS_TEXT_BASE 0xC1F00000
> -
> -/* we will never enable dcache, because we have to setup MMU first */
> -#define CONFIG_SYS_DCACHE_OFF
> -#undef CONFIG_USE_IRQ
> -
> -/* Console setting */
> -
> -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> -#define CONFIG_SETUP_MEMORY_TAGS 1
> -#define CONFIG_INITRD_TAG 1
> -
> -/*
> - * Size of malloc() pool
> - */
> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
> -
> -/*
> - * select serial console configuration
> - */
> -#define CONFIG_SA1100_SERIAL 1
> -#define CONFIG_SERIAL3 1 /* we use serial 3 */
> -#define CONFIG_BAUDRATE 19200
> -#define CONFIG_LOADS_ECHO 1
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -#define CONFIG_CMD_FLASH
> -#define CONFIG_CMD_JFFS2
> -#undef CONFIG_CMD_NET
> -#undef CONFIG_CMD_NFS
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_MISC
> -#undef CONFIG_CMD_SETGETDCR
> -#undef CONFIG_CMD_XIMG
> -
> -#define CONFIG_BOOTDELAY 5
> -#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1"
> -#define CONFIG_BOOTCOMMAND "run boot_kernel"
> -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
> -#define CONFIG_SYS_LOAD_ADDR 0xc0000000
> -
> -/*
> - * Miscellaneous configurable options
> - */
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> -#define CONFIG_SYS_PROMPT "HP Jornada# "
> -#define CONFIG_SYS_CBSIZE 256 /* console buffsize */
> -#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16)
> -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> -#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */
> -#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */
> -#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */
> -#define CONFIG_SYS_HZ 1000
> -#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */
> -#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
> -
> -/*-----------------------------------------------------------------------
> - * Stack sizes
> - *
> - * The stack sizes are set up in start.S using the settings below
> - */
> -#define CONFIG_STACKSIZE (128*1024) /* regular stack */
> -#define CONFIG_SYS_FLASH_CFI 1
> -#define CONFIG_FLASH_CFI_DRIVER 1
> -#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
> -#define CONFIG_SYS_FLASH_BASE 0x00000000
> -#define CONFIG_SYS_FLASH_ERASE_TOUT (4096)
> -#define CONFIG_SYS_FLASH_WRITE_TOUT (4096)
> -#define CONFIG_SYS_FLASH_INCREMENT 0x02000000
> -#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */
> -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
> -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */
> -#define CONFIG_SYS_MAX_FLASH_BANKS 1
> -#define CONFIG_SYS_MAX_FLASH_SECT 260
> -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
> -#define CONFIG_SYS_FLASH_EMPTY_INFO 1
> -#define CONFIG_SYS_MONITOR_LEN 0x00040000
> -#define CONFIG_SYS_MONITOR_BASE 0x00000000
> -#define CONFIG_FLASH_SHOW_PROGRESS 1
> -
> -/* Environment */
> -#define CONFIG_ENV_IS_IN_FLASH 1
> -#define CONFIG_ENV_ADDR 0x00040000
> -#define CONFIG_ENV_OFFSET 0x00040000
> -#define CONFIG_ENV_SIZE 0x00040000
> -#define CONFIG_ENV_SECT_SIZE 0x00040000
> -#define CONFIG_ENV_OVERWRITE 1
> -
> -/*
> - Monitor - 0x00000000 - 0x00040000 (256kb)
> - Environment - 0x00040000 - 0x00080000 (256kb)
> - Kernel - 0x00080000 - 0x00380000 (3mb)
> - Rootfs - 0x00380000 - 0x........ (rest)
> -*/
> -
> -#define CONFIG_NR_DRAM_BANKS 2
> -#define CONFIG_SYS_SDRAM_BASE 0x00000000
> -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
> -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
> -#define CONFIG_SYS_INIT_SP_ADDR 0x0
> -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
> -#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */
> -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
> -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
> -
> -#define CONFIG_CMD_MTDPARTS
> -#define CONFIG_MTD_DEVICE
> -#define CONFIG_FLASH_CFI_MTD
> -#define MTDIDS_DEFAULT "nor0=jornada7xx-0"
> -#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\
> - "3m(kernel),-(user);"
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - "flash_kernel=protect off all; " \
> - "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \
> - "flash_uboot=protect off all; " \
> - "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \
> - "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0"
> -#endif /* __CONFIG_H */
> --
> 1.7.6
^ permalink raw reply [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board
2011-07-18 11:20 ` Kristoffer Ericson
@ 2011-07-18 12:11 ` Wolfgang Denk
2011-07-18 16:38 ` Kristoffer Ericson
0 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 12:11 UTC (permalink / raw)
To: u-boot
Dear Kristoffer Ericson,
In message <20110718112058.GA2596@Boggieman> you wrote:
> Please dont. I have the patches here, will send them during the week.
You are late. Board removal has been announced a number of times,
several months ago. Why do you wake up only now, after letting me
spend the efforts to prepare the removal patches?
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"What the scientists have in their briefcases is terrifying."
- Nikita Khrushchev
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board
2011-07-18 12:11 ` Wolfgang Denk
@ 2011-07-18 16:38 ` Kristoffer Ericson
0 siblings, 0 replies; 90+ messages in thread
From: Kristoffer Ericson @ 2011-07-18 16:38 UTC (permalink / raw)
To: u-boot
On Mon, Jul 18, 2011 at 02:11:55PM +0200, Wolfgang Denk wrote:
> Dear Kristoffer Ericson,
>
> In message <20110718112058.GA2596@Boggieman> you wrote:
> > Please dont. I have the patches here, will send them during the week.
>
> You are late. Board removal has been announced a number of times,
> several months ago. Why do you wake up only now, after letting me
> spend the efforts to prepare the removal patches?
>
I do not regulary check the mailinglist messages and wasnt being CC:ed
until now.
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> "What the scientists have in their briefcases is terrifying."
> - Nikita Khrushchev
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 05/52] ARM: remove broken "lart" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (3 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 04/52] ARM: remove broken "jornada" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 06/52] ARM: remove broken "shannon" board Wolfgang Denk
` (48 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Alex Z?pke <azu@sysgo.de>
---
MAINTAINERS | 4 -
board/lart/Makefile | 51 -----
board/lart/config.mk | 23 ---
board/lart/flash.c | 474 --------------------------------------------
board/lart/flashasm.S | 177 -----------------
board/lart/lart.c | 76 -------
board/lart/lowlevel_init.S | 94 ---------
boards.cfg | 1 -
doc/README.scrapyard | 9 +-
include/configs/lart.h | 160 ---------------
10 files changed, 5 insertions(+), 1064 deletions(-)
delete mode 100644 board/lart/Makefile
delete mode 100644 board/lart/config.mk
delete mode 100644 board/lart/flash.c
delete mode 100644 board/lart/flashasm.S
delete mode 100644 board/lart/lart.c
delete mode 100644 board/lart/lowlevel_init.S
delete mode 100644 include/configs/lart.h
diff --git a/MAINTAINERS b/MAINTAINERS
index af641d2..00beed7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -900,10 +900,6 @@ Richard Woodruff <r-woodruff2@ti.com>
omap2420h4 ARM1136EJS
-Alex Z?pke <azu@sysgo.de>
-
- lart SA1100
-
Syed Mohammed Khasim <sm.khasim@gmail.com>
Sughosh Ganu <urwithsughosh@gmail.com>
diff --git a/board/lart/Makefile b/board/lart/Makefile
deleted file mode 100644
index 463bc0b..0000000
--- a/board/lart/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := lart.o flash.o
-SOBJS := flashasm.o lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lart/config.mk b/board/lart/config.mk
deleted file mode 100644
index b6b5e4d..0000000
--- a/board/lart/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# LART board with SA1100 cpu
-#
-# see http://www.lart.tudelft.nl/ for more information on LART
-#
-
-#
-# LART has 4 banks of 8 MB DRAM
-#
-# c000'0000
-# c100'0000
-# c800'0000
-# c900'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c178'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0xc1780000
diff --git a/board/lart/flash.c b/board/lart/flash.c
deleted file mode 100644
index 29a331e..0000000
--- a/board/lart/flash.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-#define FLASH_BANK_SIZE 0x800000
-#define MAIN_SECT_SIZE 0x20000
-#define PARAM_SECT_SIZE 0x4000
-
-/* puzzle magic for lart
- * data_*_flash are def'd in flashasm.S
- */
-
-extern u32 data_from_flash(u32);
-extern u32 data_to_flash(u32);
-
-#define PUZZLE_FROM_FLASH(x) data_from_flash((x))
-#define PUZZLE_TO_FLASH(x) data_to_flash((x))
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++)
- {
- if (j <= 7)
- {
- flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
- }
- else
- {
- flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
- printf("2x 28F160F3B (16Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
- if ((i % 5) == 0)
- {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done:
- ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT)
- {
- printf ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY)
- {
- printf ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR)
- {
- printf ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR)
- {
- printf ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR)
- {
- printf ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR)
- {
- printf ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR)
- {
- printf ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND)
- {
- printf ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND)
- {
- printf ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
- {
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- if (info->protect[sect] == 0)
- { /* not protected */
- vu_long *addr = (vu_long *)(info->start[sect]);
-
- *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
- *addr = PUZZLE_TO_FLASH(CMD_ERASE_SETUP);
- *addr = PUZZLE_TO_FLASH(CMD_ERASE_CONFIRM);
-
- /* wait until flash is ready */
- do
- {
- /* check timeout */
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
- {
- *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
- result = BIT_TIMEOUT;
- break;
- }
-
- result = PUZZLE_FROM_FLASH(*addr);
- } while (~result & BIT_BUSY);
-
- *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
-
- if ((rc = flash_error(result)) != ERR_OK)
- goto outahere;
-
- printf("ok.\n");
- }
- else /* it was protected */
- {
- printf("protected!\n");
- }
- }
-
- if (ctrlc())
- printf("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *)dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
-
- /* Check if Flash is (sufficiently) erased
- */
- result = PUZZLE_FROM_FLASH(*addr);
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
- *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
- *addr = PUZZLE_TO_FLASH(CMD_PROGRAM);
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait until flash is ready */
- do
- {
- /* check timeout */
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
- {
- *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
- result = BIT_TIMEOUT;
- break;
- }
-
- result = PUZZLE_FROM_FLASH(*addr);
- } while (~result & BIT_BUSY);
-
- *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
-
- rc = flash_error(result);
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- return write_word(info, wp, data);
-}
diff --git a/board/lart/flashasm.S b/board/lart/flashasm.S
deleted file mode 100644
index 9021972..0000000
--- a/board/lart/flashasm.S
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * flashasm.S: flash magic for LART
- *
- * Copyright (C) 1999 2000 2001 Jan-Derk bakker (J.D.Bakker@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-.text
-
-
-.globl data_to_flash
-.globl data_from_flash
- /* Subroutine that takes data in r0 and formats it so it will be in */
- /* the correct order for the internal flash */
- /* used for LART only */
-data_to_flash:
- mov r1, #0x0
-
- tst r0, #0x00000001
- orrne r1, r1, #0x00001000
- tst r0, #0x00000002
- orrne r1, r1, #0x00004000
- tst r0, #0x00000004
- orrne r1, r1, #0x00000800
- tst r0, #0x00000008
- orrne r1, r1, #0x00000200
- tst r0, #0x00000010
- orrne r1, r1, #0x00000001
- tst r0, #0x00000020
- orrne r1, r1, #0x00000004
- tst r0, #0x00000040
- orrne r1, r1, #0x00000080
- tst r0, #0x00000080
- orrne r1, r1, #0x00000020
-
- tst r0, #0x00000100
- orrne r1, r1, #0x00002000
- tst r0, #0x00000200
- orrne r1, r1, #0x00008000
- tst r0, #0x00000400
- orrne r1, r1, #0x00000400
- tst r0, #0x00000800
- orrne r1, r1, #0x00000100
- tst r0, #0x00001000
- orrne r1, r1, #0x00000002
- tst r0, #0x00002000
- orrne r1, r1, #0x00000008
- tst r0, #0x00004000
- orrne r1, r1, #0x00000040
- tst r0, #0x00008000
- orrne r1, r1, #0x00000010
-
- tst r0, #0x00010000
- orrne r1, r1, #0x00100000
- tst r0, #0x00020000
- orrne r1, r1, #0x00400000
- tst r0, #0x00040000
- orrne r1, r1, #0x00080000
- tst r0, #0x00080000
- orrne r1, r1, #0x00020000
- tst r0, #0x00100000
- orrne r1, r1, #0x01000000
- tst r0, #0x00200000
- orrne r1, r1, #0x04000000
- tst r0, #0x00400000
- orrne r1, r1, #0x80000000
- tst r0, #0x00800000
- orrne r1, r1, #0x20000000
-
- tst r0, #0x01000000
- orrne r1, r1, #0x00200000
- tst r0, #0x02000000
- orrne r1, r1, #0x00800000
- tst r0, #0x04000000
- orrne r1, r1, #0x00040000
- tst r0, #0x08000000
- orrne r1, r1, #0x00010000
- tst r0, #0x10000000
- orrne r1, r1, #0x02000000
- tst r0, #0x20000000
- orrne r1, r1, #0x08000000
- tst r0, #0x40000000
- orrne r1, r1, #0x40000000
- tst r0, #0x80000000
- orrne r1, r1, #0x10000000
-
- mov r0, r1
- mov pc, lr
-
- /* Takes data received from the flash, and unshuffles it. */
-data_from_flash:
- mov r1, #0x00
-
- tst r0, #0x00000001
- orrne r1, r1, #0x00000010
- tst r0, #0x00000002
- orrne r1, r1, #0x00001000
- tst r0, #0x00000004
- orrne r1, r1, #0x00000020
- tst r0, #0x00000008
- orrne r1, r1, #0x00002000
- tst r0, #0x00000010
- orrne r1, r1, #0x00008000
- tst r0, #0x00000020
- orrne r1, r1, #0x00000080
- tst r0, #0x00000040
- orrne r1, r1, #0x00004000
- tst r0, #0x00000080
- orrne r1, r1, #0x00000040
-
- tst r0, #0x00000100
- orrne r1, r1, #0x00000800
- tst r0, #0x00000200
- orrne r1, r1, #0x00000008
- tst r0, #0x00000400
- orrne r1, r1, #0x00000400
- tst r0, #0x00000800
- orrne r1, r1, #0x00000004
- tst r0, #0x00001000
- orrne r1, r1, #0x00000001
- tst r0, #0x00002000
- orrne r1, r1, #0x00000100
- tst r0, #0x00004000
- orrne r1, r1, #0x00000002
- tst r0, #0x00008000
- orrne r1, r1, #0x00000200
-
- tst r0, #0x00010000
- orrne r1, r1, #0x08000000
- tst r0, #0x00020000
- orrne r1, r1, #0x00080000
- tst r0, #0x00040000
- orrne r1, r1, #0x04000000
- tst r0, #0x00080000
- orrne r1, r1, #0x00040000
- tst r0, #0x00100000
- orrne r1, r1, #0x00010000
- tst r0, #0x00200000
- orrne r1, r1, #0x01000000
- tst r0, #0x00400000
- orrne r1, r1, #0x00020000
- tst r0, #0x00800000
- orrne r1, r1, #0x02000000
-
- tst r0, #0x01000000
- orrne r1, r1, #0x00100000
- tst r0, #0x02000000
- orrne r1, r1, #0x10000000
- tst r0, #0x04000000
- orrne r1, r1, #0x00200000
- tst r0, #0x08000000
- orrne r1, r1, #0x20000000
- tst r0, #0x10000000
- orrne r1, r1, #0x80000000
- tst r0, #0x20000000
- orrne r1, r1, #0x00800000
- tst r0, #0x40000000
- orrne r1, r1, #0x40000000
- tst r0, #0x80000000
- orrne r1, r1, #0x00400000
-
- mov r0, r1
- mov pc, lr
diff --git a/board/lart/lart.c b/board/lart/lart.c
deleted file mode 100644
index a0b459f..0000000
--- a/board/lart/lart.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of LART-Board */
- gd->bd->bi_arch_number = MACH_TYPE_LART;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- bd_t *bd = gd->bd;
-
- bd->bi_dram[0].start = PHYS_SDRAM_1;
- bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- bd->bi_dram[1].start = PHYS_SDRAM_2;
- bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- bd->bi_dram[2].start = PHYS_SDRAM_3;
- bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- bd->bi_dram[3].start = PHYS_SDRAM_4;
- bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/lart/lowlevel_init.S b/board/lart/lowlevel_init.S
deleted file mode 100644
index db9fd63..0000000
--- a/board/lart/lowlevel_init.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-
-#define MDCNFG 0x00
-#define MDCAS0 0x04
-#define MDCAS1 0x08
-#define MDCAS2 0x0c
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-
-mdcas0: .long 0xc71c703f
-mdcas1: .long 0xffc71c71
-mdcas2: .long 0xffffffff
-/* mdcnfg: .long 0x0bb2bcbf */
-mdcnfg: .long 0x0334b22f @ alt
-/* mcs0: .long 0xfff8fff8 */
-msc0: .long 0xad8c4888 @ alt
-mecr: .long 0x00060006
-/* mecr: .long 0x994a994a @ alt */
-
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
- ldr r0, MEM_BASE
-
- /* Setup the flash memory */
- ldr r1, msc0
- str r1, [r0, #MSC0]
-
- /* Set up the DRAM */
-
- /* MDCAS0 */
- ldr r1, mdcas0
- str r1, [r0, #MDCAS0]
-
- /* MDCAS1 */
- ldr r1, mdcas1
- str r1, [r0, #MDCAS1]
-
- /* MDCAS2 */
- ldr r1, mdcas2
- str r1, [r0, #MDCAS2]
-
- /* MDCNFG */
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
-
- /* Set up PCMCIA space */
- ldr r1, mecr
- str r1, [r0, #MECR]
-
- /* Load something to activate bank */
- ldr r1, MEM_START
-
-.rept 8
- ldr r0, [r1]
-.endr
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index d2c3574..06dc73e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-lart arm sa1100
shannon arm sa1100
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 851754c..d810ba7 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -4,22 +4,23 @@ negligence in combination with ordinary bitrot. Sometimes this goes
by unnoticed, but often build errors will result. If nobody cares any
more to resolve such problems, then the code is really dead and will
be removed from the U-Boot source tree. The remainders rest in piece
-in the imperishable depths of the git history. This document tries to
+in the imperishable depths of the git history. This document tries to
maintain a list of such former fellows, so archeologists can check
easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
-jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
-gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
+lart arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
+jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
dnp1110 arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
delta ARM PXA2xx 75e2035 2010-10-20
-mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
+mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
diff --git a/include/configs/lart.h b/include/configs/lart.h
deleted file mode 100644
index 7316b23..0000000
--- a/include/configs/lart.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the LART board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
-#define CONFIG_LART 1 /* on an LART Board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20008300
-#define CONFIG_CS8900_BUS16
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on LART */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 9600
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 172.22.2.131
-#define CONFIG_SERVERIP 172.22.2.126
-#define CONFIG_BOOTFILE "elinos-lart"
-#define CONFIG_BOOTCOMMAND "tftp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LART # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc8000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_2 0xc1000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_3 0xc8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_4 0xc9000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00800000 /* 8 MB */
-
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (31+8) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 06/52] ARM: remove broken "shannon" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (4 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 05/52] ARM: remove broken "lart" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 07/52] ARM: remove broken "ap7" board Wolfgang Denk
` (47 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rolf Offermanns <rof@sysgo.de>
---
MAINTAINERS | 4 -
board/shannon/Makefile | 51 -----
board/shannon/config.mk | 23 --
board/shannon/flash.c | 473 -----------------------------------------
| Bin 128 -> 0 bytes
board/shannon/lowlevel_init.S | 92 --------
board/shannon/shannon.c | 99 ---------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/shannon.h | 223 -------------------
10 files changed, 1 insertions(+), 966 deletions(-)
delete mode 100644 board/shannon/Makefile
delete mode 100644 board/shannon/config.mk
delete mode 100644 board/shannon/flash.c
delete mode 100644 board/shannon/inferno.header
delete mode 100644 board/shannon/lowlevel_init.S
delete mode 100644 board/shannon/shannon.c
delete mode 100644 include/configs/shannon.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 00beed7..97963ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -753,10 +753,6 @@ Nagendra T S <nagendra@mistralsolutions.com>
am3517_crane ARM ARMV7 (AM35x SoC)
-Rolf Offermanns <rof@sysgo.de>
-
- shannon SA1100
-
Kyungmin Park <kyungmin.park@samsung.com>
apollon ARM1136EJS
diff --git a/board/shannon/Makefile b/board/shannon/Makefile
deleted file mode 100644
index 23ac987..0000000
--- a/board/shannon/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := shannon.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/shannon/config.mk b/board/shannon/config.mk
deleted file mode 100644
index 6afa2d3..0000000
--- a/board/shannon/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# LART board with SA1100 cpu
-#
-# see http://www.lart.tudelft.nl/ for more information on LART
-#
-
-#
-# Tuxscreen has 4 banks of 4 MB DRAM each
-#
-# c000'0000
-# c800'0000
-# d000'0000
-# d800'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to d838'0000, the upper 1 MB of the last (4th) bank
-#
-# download areas is c800'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0xd8380000
diff --git a/board/shannon/flash.c b/board/shannon/flash.c
deleted file mode 100644
index 0455afa..0000000
--- a/board/shannon/flash.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-#define FLASH_BANK_SIZE 0x400000 /* 4 MB */
-#define MAIN_SECT_SIZE 0x20000 /* 128 KB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00F000F0
-#define CMD_UNLOCK1 0x00AA00AA
-#define CMD_UNLOCK2 0x00550055
-#define CMD_ERASE_SETUP 0x00800080
-#define CMD_ERASE_CONFIRM 0x00300030
-#define CMD_PROGRAM 0x00A000A0
-#define CMD_UNLOCK_BYPASS 0x00200020
-
-#define MEM_FLASH_ADDR1 (*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 2)))
-#define MEM_FLASH_ADDR2 (*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 2)))
-
-#define BIT_ERASE_DONE 0x00800080
-#define BIT_RDY_MASK 0x00800080
-#define BIT_PROGRAM_ERROR 0x00200020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV160B & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++)
- {
-
- if (j <= 3)
- {
- /* 1st one is 32 KB */
- if (j == 0)
- {
- flash_info[i].start[j] = flashbase + 0;
- }
-
- /* 2nd and 3rd are both 16 KB */
- if ((j == 1) || (j == 2))
- {
- flash_info[i].start[j] = flashbase + 0x8000 + (j-1)*0x4000;
- }
-
- /* 4th 64 KB */
- if (j == 3)
- {
- flash_info[i].start[j] = flashbase + 0x10000;
- }
- }
- else
- {
- flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- * Inferno is complicated, it's hardware locked
- */
-#ifdef CONFIG_INFERNO
- /* first one, 0x00000 to 0x07fff */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE + 0x00000,
- CONFIG_SYS_FLASH_BASE + 0x08000 - 1,
- &flash_info[0]);
-
- /* third to 10th, 0x0c000 - 0xdffff */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE + 0x0c000,
- CONFIG_SYS_FLASH_BASE + 0xe0000 - 1,
- &flash_info[0]);
-#else
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf("AMD: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case (AMD_ID_LV160B & FLASH_TYPEMASK):
- printf("2x Amd29F160BB (16Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
- if ((i % 5) == 0)
- {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done:
- ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip1, chip2;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (AMD_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
- {
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- if (info->protect[sect] == 0)
- { /* not protected */
- vu_long *addr = (vu_long *)(info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip1 = chip2 = 0;
-
- do
- {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
- {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip1 = TMO;
- break;
- }
-
- if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip1 = READY;
-
- if (!chip1 && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
- chip1 = ERR;
-
- if (!chip2 && (result >> 16) & BIT_ERASE_DONE)
- chip2 = READY;
-
- if (!chip2 && (result >> 16) & BIT_PROGRAM_ERROR)
- chip2 = ERR;
-
- } while (!chip1 || !chip2);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip1 == ERR || chip2 == ERR)
- {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip1 == TMO)
- {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf("ok.\n");
- }
- else /* it was protected */
- {
- printf("protected!\n");
- }
- }
-
- if (ctrlc())
- printf("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *)dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip1, chip2;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait until flash is ready */
- chip1 = chip2 = 0;
- do
- {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
- {
- chip1 = ERR | TMO;
- break;
- }
- if (!chip1 && ((result & 0x80) == (data & 0x80)))
- chip1 = READY;
-
- if (!chip1 && ((result & 0xFFFF) & BIT_PROGRAM_ERROR))
- {
- result = *addr;
-
- if ((result & 0x80) == (data & 0x80))
- chip1 = READY;
- else
- chip1 = ERR;
- }
-
- if (!chip2 && ((result & (0x80 << 16)) == (data & (0x80 << 16))))
- chip2 = READY;
-
- if (!chip2 && ((result >> 16) & BIT_PROGRAM_ERROR))
- {
- result = *addr;
-
- if ((result & (0x80 << 16)) == (data & (0x80 << 16)))
- chip2 = READY;
- else
- chip2 = ERR;
- }
-
- } while (!chip1 || !chip2);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip1 == ERR || chip2 == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- return write_word(info, wp, data);
-}
diff --git a/board/shannon/inferno.header b/board/shannon/inferno.header
deleted file mode 100644
index 28ee85afd18671652d08020b9404f0dec1b616a6..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001
literal 128
ucmZQzSn!Ymh<O+oUP}Y9AOpjD1_mYuEZ_u4OaVgzq90@ishID>f`<SKbszWu
diff --git a/board/shannon/lowlevel_init.S b/board/shannon/lowlevel_init.S
deleted file mode 100644
index 0655c42..0000000
--- a/board/shannon/lowlevel_init.S
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-
-#define MDCNFG 0x00
-#define MDCAS0 0x04
-#define MDCAS1 0x08
-#define MDCAS2 0x0c
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-
-mdcas0: .long 0xc71c703f @ cccccccf
-mdcas1: .long 0xffc71c71 @ fffffffc
-mdcas2: .long 0xffffffff @ ffffffff
-mdcnfg: .long 0x0334b21f @ 9326991f
-msc0: .long 0xfff84458 @ 42304230
-msc1: .long 0xffffffff @ 20182018
-mecr: .long 0x7fff7fff @ 01000000
-
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
- ldr r0, MEM_BASE
-
- /* Setup the flash memory */
- ldr r1, msc0
- str r1, [r0, #MSC0]
-
- /* Set up the DRAM */
-
- /* MDCAS0 */
- ldr r1, mdcas0
- str r1, [r0, #MDCAS0]
-
- /* MDCAS1 */
- ldr r1, mdcas1
- str r1, [r0, #MDCAS1]
-
- /* MDCAS2 */
- ldr r1, mdcas2
- str r1, [r0, #MDCAS2]
-
- /* MDCNFG */
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
-
- /* Set up PCMCIA space */
- ldr r1, mecr
- str r1, [r0, #MECR]
-
- /* Load something to activate bank */
- ldr r1, MEM_START
-
-.rept 8
- ldr r0, [r1]
-.endr
-
- /* everything is fine now */
- mov pc, lr
diff --git a/board/shannon/shannon.c b/board/shannon/shannon.c
deleted file mode 100644
index 8cd1fc3..0000000
--- a/board/shannon/shannon.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* but if we use InfernoLoader, we must do some inits here */
-
-#ifdef CONFIG_INFERNO
- {
- unsigned long temp;
- __asm__ __volatile__(/* disable MMU, enable icache */
- "mrc p15, 0, %0, c1, c0\n"
- "bic %0, %0, #0x00002000\n"
- "bic %0, %0, #0x0000000f\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000002\n"
- "mcr p15, 0, %0, c1, c0\n"
- /* flush caches */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c7, 0\n"
- "mcr p15, 0, %0, c8, c7, 0\n"
- : "=r" (temp)
- :
- : "memory");
- /* setup PCMCIA timing */
- temp = 0xa0000018;
- *(unsigned long *)temp = 0x00060006;
-
- }
-#endif /* CONFIG_INFERNO */
-
- /* arch number for shannon */
- gd->bd->bi_arch_number = MACH_TYPE_SHANNON;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
-#if defined(PHYS_SDRAM_1) || defined(PHYS_SDRAM_2) || \
- defined(PHYS_SDRAM_3) || defined(PHYS_SDRAM_4)
- bd_t *bd = gd->bd;
-#endif
-
-#ifdef PHYS_SDRAM_1
- bd->bi_dram[0].start = PHYS_SDRAM_1;
- bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-#endif
-
-#ifdef PHYS_SDRAM_2
- bd->bi_dram[1].start = PHYS_SDRAM_2;
- bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
-
-#ifdef PHYS_SDRAM_3
- bd->bi_dram[2].start = PHYS_SDRAM_3;
- bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-#endif
-
-#ifdef PHYS_SDRAM_4
- bd->bi_dram[3].start = PHYS_SDRAM_4;
- bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-#endif
-
- return (0);
-}
diff --git a/boards.cfg b/boards.cfg
index 06dc73e..0cf7e8c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,7 +202,6 @@ xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
B2 arm s3c44b0 - dave
-shannon arm sa1100
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d810ba7..d13dfd2 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+shannon arm sa1100 - 2011-07-16 Rolf Offermanns <rof@sysgo.de>
lart arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
gcplus arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
deleted file mode 100644
index fce4121..0000000
--- a/include/configs/shannon.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Since we use the Inferno-Loader to bring us to live,
- * we skip the lowlevel init stuff.
- * But U-Boot still relocates itself into RAM
- */
-#define CONFIG_INFERNO /* we are using the inferno bootldr */
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
-#define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_3C589 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_BOOTCOMMAND "help"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "TuxScreen # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xd0000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x09 /* 190 MHz for Shannon */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_DOS_PARTITION 1 /* DOS partitiion support */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-/* BE CAREFUL */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of EDORAM */
-#define PHYS_SDRAM_1 0xc0000000 /* RAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_2 0xc8000000 /* RAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_3 0xd0000000 /* RAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_4 0xd8000000 /* RAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00400000 /* 4 MB */
-
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (31+4) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_INFERNO
-/* we take the last sector, 128 KB in size, but we only use 16 KB of it for stack reasons */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x003E0000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#define CONFIG_ENV_SECT_SIZE (128 << 10) /* size of environment sector */
-#else
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-
-/* we pick the upper one */
-
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0x20000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0x24000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0x2C000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0x28000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-
-/* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-/* it's simple, all regs are in I/O space */
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_ATTRB_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0
-
-/*-----------------------------------------------------------------------
- */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 07/52] ARM: remove broken "ap7" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (5 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 06/52] ARM: remove broken "shannon" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 08/52] ARM: remove broken "ap720t" board Wolfgang Denk
` (46 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 4adaeb8..1fef0b0 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ap7 \
ap720t \
armadillo \
B2 \
diff --git a/Makefile b/Makefile
index e56fa02..fd135b1 100644
--- a/Makefile
+++ b/Makefile
@@ -899,7 +899,6 @@ ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
-ap7_config \
ap720t_config \
ap920t_config \
ap926ejs_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d13dfd2..c18dcad 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap7 arm ? - 2011-07-16
shannon arm sa1100 - 2011-07-16 Rolf Offermanns <rof@sysgo.de>
lart arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
jornada arm sa1100 - 2011-07-16 Kristoffer Ericson <kristoffer.ericson@gmail.com>
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 08/52] ARM: remove broken "ap720t" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (6 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 07/52] ARM: remove broken "ap7" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 09/52] ARM: remove broken "armadillo" board Wolfgang Denk
` (45 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 1fef0b0..e8579f3 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ap720t \
armadillo \
B2 \
ep7312 \
diff --git a/Makefile b/Makefile
index fd135b1..760111b 100644
--- a/Makefile
+++ b/Makefile
@@ -899,7 +899,6 @@ ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
-ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index c18dcad..d6f40f4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap720t arm ? - 2011-07-16
ap7 arm ? - 2011-07-16
shannon arm sa1100 - 2011-07-16 Rolf Offermanns <rof@sysgo.de>
lart arm sa1100 - 2011-07-16 Alex Z?pke <azu@sysgo.de>
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 09/52] ARM: remove broken "armadillo" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (7 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 08/52] ARM: remove broken "ap720t" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 10/52] ARM: remove broken "B2" board Wolfgang Denk
` (44 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rowel Atienza <rowel@diwalabs.com>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/armadillo/Makefile | 55 -------
board/armadillo/armadillo.c | 72 ---------
board/armadillo/config.mk | 29 ----
board/armadillo/flash.c | 338 ---------------------------------------
board/armadillo/lowlevel_init.S | 66 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/armadillo.h | 157 ------------------
10 files changed, 1 insertions(+), 723 deletions(-)
delete mode 100644 board/armadillo/Makefile
delete mode 100644 board/armadillo/armadillo.c
delete mode 100644 board/armadillo/config.mk
delete mode 100644 board/armadillo/flash.c
delete mode 100644 board/armadillo/lowlevel_init.S
delete mode 100644 include/configs/armadillo.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 97963ff..a9dc04f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -562,10 +562,6 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
-Rowel Atienza <rowel@diwalabs.com>
-
- armadillo ARM720T
-
Stefano Babic <sbabic@denx.de>
ea20 davinci
diff --git a/MAKEALL b/MAKEALL
index e8579f3..b7d9455 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- armadillo \
B2 \
ep7312 \
evb4510 \
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
deleted file mode 100644
index 3b52452..0000000
--- a/board/armadillo/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := armadillo.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
deleted file mode 100644
index a825144..0000000
--- a/board/armadillo/armadillo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_ARMADILLO - not official*/
- gd->bd->bi_arch_number = 83;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk
deleted file mode 100644
index ecb8b74..0000000
--- a/board/armadillo/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
deleted file mode 100644
index cdbbfd0..0000000
--- a/board/armadillo/flash.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Flash driver for armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x400000
-
-/*value used by hermit is 0x200*/
-/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
-#define MAIN_SECT_SIZE 0x10000
-
-#define UNALIGNED_MASK (3)
-#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
-#define FLASH_TIMEOUT 20000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
- /*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] =
- flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (FUJ_MANUFACT & FLASH_VENDMASK):
- printf ("Fujitsu: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-/*
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf ("28F128J3 (128Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-*/
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-/*
-Done: ;
-*/
-}
-
-/*
- * * Loop until both write state machines complete.
- * */
-static unsigned short flash_status_wait (unsigned long addr,
- unsigned short value)
-{
- unsigned short status;
- long timeout = FLASH_TIMEOUT;
-
- while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
- timeout--;
- }
- return status;
-}
-
-/*
- * Loop until the Write State machine is ready, then do a full error
- * check. Clear status and leave the flash in Read Array mode; return
- * 0 for no error, -1 for error.
- */
-static int flash_status_full_check (unsigned long addr, unsigned short value1,
- unsigned short value2)
-{
- unsigned short status1, status2;
-
- status1 = flash_status_wait (addr, value1);
- status2 = flash_status_wait (addr + 2, value2);
- return (status1 != value1 || status2 != value2) ? -1 : 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
- unsigned long base;
- unsigned long addr;
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FUJ_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first, sect);
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- /* ARM simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
-
- addr = sect * MAIN_SECT_SIZE;
- addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */
- base = addr & 0xF0000000;
-
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0x80;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (addr) = 0x30;
- if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
- return ERR_PROTECTED;
- }
- }
- printf ("\nDone.\n");
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- int flag;
- unsigned long base;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((FL_WORD (dest) & data) != data)
- return ERR_NOT_ERASED;
-
- /*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- base = dest & 0xF0000000;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0xA0;
- FL_WORD (dest) = data;
- /*printf("writing 0x%p = 0x%x\n",dest,data); */
- if (flash_status_wait (dest, data) != data)
- return ERR_PROG_ERROR;
-
- if (flag)
- enable_interrupts ();
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
- printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- printf ("\nDone.\n");
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
deleted file mode 100644
index e7d373d..0000000
--- a/board/armadillo/lowlevel_init.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Initialization stuff - taken from hermit
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-/* setting up the memory */
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0x0000c000
-
-.globl lowlevel_init
-lowlevel_init:
- mov r0, #0x70 /* 32-bit code + data, MMU mandatory */
- mcr p15, 0, r0, c1, c0, 0 /* MMU init */
-
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- mov r0, #0x80000000 /* I/O base */
-
- mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */
- add r2, r0, #0x2200 /* address of SYSCON3 in r2 */
- str r1, [r2] /* set clock speed to 73.728 MHz */
-
- mov r1, #0x81 /* 64KHz DRAM refresh period */
- str r1, [r0, #0x200] /* set DRFPR */
-
- mov r1, #0x500 /* permanent enable, 16bits wide */
- add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */
- add r2, r0, #0x2300 /* load address in r2 */
- str r1, [r2]
-
- mov r1, #0x100 /* SDRAM refresh rate */
- add r2, r0, #0x2340 /* load address in r2 */
- str r1, [r2]
-
- mov sp, #SRAM_START /* init stack pointer */
- add sp, sp, #SRAM_SIZE
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 0cf7e8c..30aabff 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -41,7 +41,6 @@ imx31_litekit arm arm1136 - logicpd
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-armadillo arm arm720t
ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d6f40f4..db64ff7 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
ap720t arm ? - 2011-07-16
ap7 arm ? - 2011-07-16
shannon arm sa1100 - 2011-07-16 Rolf Offermanns <rof@sysgo.de>
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
deleted file mode 100644
index d0d0998..0000000
--- a/include/configs/armadillo.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel at diwalabs.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000300 /* armadillo board */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
-
-#define CONFIG_BOOTCOMMAND "bootm 40000 180000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "ARMADILLO # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
-
-#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 10/52] ARM: remove broken "B2" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (8 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 09/52] ARM: remove broken "armadillo" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 11/52] ARM: remove broken "ep7312" board Wolfgang Denk
` (43 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/dave/B2/B2.c | 139 --------------------------
board/dave/B2/Makefile | 55 -----------
board/dave/B2/config.mk | 30 ------
board/dave/B2/flash.c | 76 --------------
board/dave/B2/lowlevel_init.S | 167 -------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/B2.h | 216 -----------------------------------------
10 files changed, 1 insertions(+), 689 deletions(-)
delete mode 100644 board/dave/B2/B2.c
delete mode 100644 board/dave/B2/Makefile
delete mode 100644 board/dave/B2/config.mk
delete mode 100644 board/dave/B2/flash.c
delete mode 100644 board/dave/B2/lowlevel_init.S
delete mode 100644 include/configs/B2.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a9dc04f..4538ce0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -829,10 +829,6 @@ Michael Schwingen <michael@schwingen.org>
actux4 xscale/ixp
dvlhost xscale/ixp
-Andrea Scian <andrea.scian@dave-tech.it>
-
- B2 ARM7TDMI (S3C44B0X)
-
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
diff --git a/MAKEALL b/MAKEALL
index b7d9455..c59ebcf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- B2 \
ep7312 \
evb4510 \
impa7 \
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
deleted file mode 100644
index 096ebbd..0000000
--- a/board/dave/B2/B2.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialization
- */
-
-int board_init (void)
-{
- u32 temp;
-
- /* Configuration Port Control Register*/
- /* Port A */
- PCONA = 0x3ff;
-
- /* Port B */
- PCONB = 0xff;
- PDATB = 0xFFFF;
-
- /* Port C */
- /*
- PCONC = 0xff55ff15;
- PDATC = 0x0;
- PUPC = 0xffff;
- */
-
- /* Port D */
- /*
- PCOND = 0xaaaa;
- PUPD = 0xff;
- */
-
- /* Port E */
- PCONE = 0x0001aaa9;
- PDATE = 0x0;
- PUPE = 0xff;
-
- /* Port F */
- PCONF = 0x124955;
- PDATF = 0xff; /* B2-eth_reset tied high level */
- /*
- PUPF = 0x1e3;
- */
-
- /* Port G */
- PUPG = 0x1;
- PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
-
- INTMSK = 0x03fffeff;
- INTCON = 0x05;
-
- /*
- Configure chip ethernet interrupt as High level
- Port G EINT 0-7 EINT0 -> CHIP ETHERNET
- */
- temp = EXTINT;
- temp &= ~0x7;
- temp |= 0x1; /*LEVEL_HIGH*/
- EXTINT = temp;
-
- /*
- Reset SMSC LAN91C96 chip
- */
- temp= PCONF;
- temp |= 0x00000040;
- PCONF = temp;
-
- /* Reset high */
- temp = PDATF;
- temp |= (1 << 3);
- PDATF = temp;
-
- /* Short delay */
- for (temp=0;temp<10;temp++)
- {
- /* NOP */
- }
-
- /* Reset low */
- temp = PDATF;
- temp &= ~(1 << 3);
- PDATF = temp;
-
- /* arch number MACH_TYPE_MBA44B0 */
- gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0x0c000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
deleted file mode 100644
index b981579..0000000
--- a/board/dave/B2/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := B2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/dave/B2/config.mk b/board/dave/B2/config.mk
deleted file mode 100644
index f7b686a..0000000
--- a/board/dave/B2/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0C100000
-
-PLATFORM_CPPFLAGS += -Uarm
diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c
deleted file mode 100644
index bb892e6..0000000
--- a/board/dave/B2/flash.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese at esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-#ifdef __DEBUG_START_FROM_SRAM__
- return CONFIG_SYS_DUMMY_FLASH_SIZE;
-#else
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Setup offsets */
- flash_get_offsets (0, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-#endif
-}
diff --git a/board/dave/B2/lowlevel_init.S b/board/dave/B2/lowlevel_init.S
deleted file mode 100644
index 2f3a364..0000000
--- a/board/dave/B2/lowlevel_init.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
- * Modified By MATTO
- *
- * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- * Documentation:
- * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
- * Advanced Developer's manual, December 1999
- *
- * Intel has a very hard to find SDRAM configurator on their web site:
- * http://appzone.intel.com/hcd/sa1110/memory/index.asp
- *
- * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
- * appears to be true, but it might be possible that somebody designs a
- * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
- *
- * 04-10-2001: SELETZ
- * - separated memory config for multiple platform support
- * - perform SA1110 Hardware Reset Procedure
- *
- */
-
-.equ B0_Tacs, 0x0 /* 0clk */
-.equ B0_Tcos, 0x0 /* 0clk */
-.equ B0_Tacc, 0x4 /* 6clk */
-.equ B0_Tcoh, 0x0 /* 0clk */
-.equ B0_Tah, 0x0 /* 0clk */
-.equ B0_Tacp, 0x0 /* 0clk */
-.equ B0_PMC, 0x0 /* normal(1data) */
-/* Bank 1 parameter */
-.equ B1_Tacs, 0x3 /* 4clk */
-.equ B1_Tcos, 0x3 /* 4clk */
-.equ B1_Tacc, 0x7 /* 14clkv */
-.equ B1_Tcoh, 0x3 /* 4clk */
-.equ B1_Tah, 0x3 /* 4clk */
-.equ B1_Tacp, 0x3 /* 6clk */
-.equ B1_PMC, 0x0 /* normal(1data) */
-
-/* Bank 2 parameter - LAN91C96 */
-.equ B2_Tacs, 0x3 /* 4clk */
-.equ B2_Tcos, 0x3 /* 4clk */
-.equ B2_Tacc, 0x7 /* 14clk */
-.equ B2_Tcoh, 0x3 /* 4clk */
-.equ B2_Tah, 0x3 /* 4clk */
-.equ B2_Tacp, 0x3 /* 6clk */
-.equ B2_PMC, 0x0 /* normal(1data) */
-
-/* Bank 3 parameter */
-.equ B3_Tacs, 0x3 /* 4clk */
-.equ B3_Tcos, 0x3 /* 4clk */
-.equ B3_Tacc, 0x7 /* 14clk */
-.equ B3_Tcoh, 0x3 /* 4clk */
-.equ B3_Tah, 0x3 /* 4clk */
-.equ B3_Tacp, 0x3 /* 6clk */
-.equ B3_PMC, 0x0 /* normal(1data) */
-
-/* Bank 4 parameter */
-.equ B4_Tacs, 0x3 /* 4clk */
-.equ B4_Tcos, 0x3 /* 4clk */
-.equ B4_Tacc, 0x7 /* 14clk */
-.equ B4_Tcoh, 0x3 /* 4clk */
-.equ B4_Tah, 0x3 /* 4clk */
-.equ B4_Tacp, 0x3 /* 6clk */
-.equ B4_PMC, 0x0 /* normal(1data) */
-
-/* Bank 5 parameter */
-.equ B5_Tacs, 0x3 /* 4clk */
-.equ B5_Tcos, 0x3 /* 4clk */
-.equ B5_Tacc, 0x7 /* 14clk */
-.equ B5_Tcoh, 0x3 /* 4clk */
-.equ B5_Tah, 0x3 /* 4clk */
-.equ B5_Tacp, 0x3 /* 6clk */
-.equ B5_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6(if SROM) parameter */
-.equ B6_Tacs, 0x3 /* 4clk */
-.equ B6_Tcos, 0x3 /* 4clk */
-.equ B6_Tacc, 0x7 /* 14clk */
-.equ B6_Tcoh, 0x3 /* 4clk */
-.equ B6_Tah, 0x3 /* 4clk */
-.equ B6_Tacp, 0x3 /* 6clk */
-.equ B6_PMC, 0x0 /* normal(1data) */
-
-/* Bank 7(if SROM) parameter */
-.equ B7_Tacs, 0x3 /* 4clk */
-.equ B7_Tcos, 0x3 /* 4clk */
-.equ B7_Tacc, 0x7 /* 14clk */
-.equ B7_Tcoh, 0x3 /* 4clk */
-.equ B7_Tah, 0x3 /* 4clk */
-.equ B7_Tacp, 0x3 /* 6clk */
-.equ B7_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6 parameter */
-.equ B6_MT, 0x3 /* SDRAM */
-.equ B6_Trcd, 0x0 /* 2clk */
-.equ B6_SCAN, 0x0 /* 10bit */
-
-.equ B7_MT, 0x3 /* SDRAM */
-.equ B7_Trcd, 0x0 /* 2clk */
-.equ B7_SCAN, 0x0 /* 10bit */
-
-
-/* REFRESH parameter */
-.equ REFEN, 0x1 /* Refresh enable */
-.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */
-.equ Trp, 0x0 /* 2clk */
-.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/
-.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */
-.equ REFCNT, 879
-
-MEMORY_CONFIG:
- .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
- .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/
- .word 0x20 /*MRSR6 CL=2clk*/
- .word 0x20 /*MRSR7*/
-
-
-.globl lowlevel_init
-lowlevel_init:
-
- /*
- the next instruction fail due memory relocation...
- we'll find the right MEMORY_CONFIG address with the next 3 lines...
- */
- /*ldr r0, =MEMORY_CONFIG*/
- mov r0, pc
- ldr r1, =(0x38+4)
- sub r0, r0, r1
-
- ldmia r0, {r1-r13}
- ldr r0, =0x01c80000
- stmia r0, {r1-r13}
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 30aabff..373e17f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -200,7 +200,6 @@ xaeniax arm pxa
xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
-B2 arm s3c44b0 - dave
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index db64ff7..6a82a06 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
ap720t arm ? - 2011-07-16
ap7 arm ? - 2011-07-16
diff --git a/include/configs/B2.h b/include/configs/B2.h
deleted file mode 100644
index e181fa8..0000000
--- a/include/configs/B2.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * Configuation settings for the B2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_B2 1 /* on an B2 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
-
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 )
-
-/*
- * Hardware drivers
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
-#define CONFIG_SMC_USE_32_BIT
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C44B0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-#define CONFIG_S3C44B0_I2C
-#define CONFIG_RTC_S3C44B0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_NET_MULTI
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
-#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
- ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.70
-#define CONFIG_SERVERIP 192.168.0.23
-#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot"
-#define CONFIG_BOOTCOMMAND "bootm 20000 f0000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0c700000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* 1 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-/*-----------------------------------------------------------------------
- * Environment Variable setup
- */
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CONFIG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (STM24C02W6) for environment
- */
-#define CONFIG_HARD_I2C /* I2c with hardware support */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
- /* 16 byte page write mode using*/
- /* last 4 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-/* Flash banks JFFS2 should use */
-/*
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 2
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-*/
-
-/*
- Linux TAGs (see arch/arm/lib/armlinux.c)
-*/
-#define CONFIG_CMDLINE_TAG
-#undef CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 11/52] ARM: remove broken "ep7312" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (9 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 10/52] ARM: remove broken "B2" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 12/52] ARM: remove broken "evb4510" board Wolfgang Denk
` (42 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Marius Gr?ger <mag@sysgo.de>
---
MAINTAINERS | 1 -
MAKEALL | 1 -
board/ep7312/Makefile | 55 -------
board/ep7312/config.mk | 28 ----
board/ep7312/ep7312.c | 66 --------
board/ep7312/flash.c | 341 ------------------------------------------
board/ep7312/lowlevel_init.S | 95 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/ep7312.h | 173 ---------------------
10 files changed, 1 insertions(+), 761 deletions(-)
delete mode 100644 board/ep7312/Makefile
delete mode 100644 board/ep7312/config.mk
delete mode 100644 board/ep7312/ep7312.c
delete mode 100644 board/ep7312/flash.c
delete mode 100644 board/ep7312/lowlevel_init.S
delete mode 100644 include/configs/ep7312.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4538ce0..a7a246a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -651,7 +651,6 @@ Simon Guinot <simon.guinot@sequanux.org>
Marius Gr?ger <mag@sysgo.de>
impa7 ARM720T (EP7211)
- ep7312 ARM720T (EP7312)
Igor Grinberg <grinberg@compulab.co.il>
diff --git a/MAKEALL b/MAKEALL
index c59ebcf..4edf61d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ep7312 \
evb4510 \
impa7 \
integratorap \
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
deleted file mode 100644
index f2d8cf5..0000000
--- a/board/ep7312/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := ep7312.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep7312/config.mk b/board/ep7312/config.mk
deleted file mode 100644
index bdd08b8..0000000
--- a/board/ep7312/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c
deleted file mode 100644
index 8ed14ad..0000000
--- a/board/ep7312/ep7312.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_EDB7312 */
- gd->bd->bi_arch_number = MACH_TYPE_EDB7312;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0020100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c
deleted file mode 100644
index 0c2b3ae..0000000
--- a/board/ep7312/flash.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x1000000
-#define MAIN_SECT_SIZE 0x20000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf ("28F128J3 (128Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done: ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *) (info->start[sect]);
-
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while ((*addr & 0x80) != 0x80) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- /* clear status register command */
- *addr = 0x50;
- /* reset to read mode */
- *addr = 0xFF;
- }
- printf ("ok.\n");
- }
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) dest, val;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((*addr & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* clear status register command */
- *addr = 0x50;
-
- /* program set-up command */
- *addr = 0x40;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait while polling the status register */
- while (((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0xB0;
- goto outahere;
- }
- }
-
- if (val & 0x1A) { /* check for error */
- printf ("\nFlash write error %02x at address %08lx\n",
- (int) val, (unsigned long) dest);
- if (val & (1 << 3)) {
- printf ("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (val & (1 << 1)) {
- printf ("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if (val & (1 << 4)) {
- printf ("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
- outahere:
- /* read array command */
- *addr = 0xFF;
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/ep7312/lowlevel_init.S b/board/ep7312/lowlevel_init.S
deleted file mode 100644
index 5dadb31..0000000
--- a/board/ep7312/lowlevel_init.S
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Memory Setup stuff - taken from ???
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-SYSCON1: .long 0x80000100
-SYSCON2: .long 0x80001100
-SYSCON3: .long 0x80002200
-MEMCFG1: .long 0x80000180
-MEMCFG2: .long 0x800001C0
-SDCONF: .long 0x80002300
-SDRFPR: .long 0x80002340
-
-syscon1_val: .long 0x00040100
-syscon2_val: .long 0x00000102
-syscon3_val: .long 0x0000020E
-memcfg1_val: .long 0x1f101710
-memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits
-memcfg2_val: .long 0x00001f13 @ upper 16 bits are reserved for CS7 + CS6
-sdrfpr_val: .long 0x00000240
-sdconf_val: .long 0x00000522
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
- /*
- * SYSCON1-3
- */
- ldr r0, SYSCON1
- ldr r1, syscon1_val
- str r1, [r0]
-
- ldr r0, SYSCON2
- ldr r1, syscon2_val
- str r1, [r0]
-
- ldr r0, SYSCON3
- ldr r1, syscon3_val
- str r1, [r0]
-
- /*
- * MEMCFG1
- */
- ldr r0, MEMCFG1
- ldr r1, memcfg1_val
- str r1, [r0]
-
- /*
- * MEMCFG2
- */
- ldr r0, MEMCFG2
- ldr r2, [r0]
- ldr r1, memcfg2_mask
- bic r2, r2, r1
- ldr r1, memcfg2_val
- orr r2, r2, r1
- str r2, [r0]
-
- /*
- * SDRFPR,SDCONF
- */
- ldr r0, SDCONF
- ldr r1, sdconf_val
- str r1, [r0]
-
- ldr r0, SDRFPR
- ldr r1, sdrfpr_val
- str r1, [r0]
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 373e17f..b5ad378 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -41,7 +41,6 @@ imx31_litekit arm arm1136 - logicpd
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 6a82a06..7200f16 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ep7312 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
ap720t arm ? - 2011-07-16
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
deleted file mode 100644
index fdb98b5..0000000
--- a/include/configs/ep7312.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_EP7312 1 /* on an EP7312 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000000
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
-#define CONFIG_ETHADDR 08:00:3e:21:c7:f7
-/*#define CONFIG_NETMASK 255.255.0.0 */
-/*#define CONFIG_IPADDR 172.22.2.128 */
-/*#define CONFIG_SERVERIP 172.22.2.126 */
-/*#define CONFIG_BOOTFILE "impa7" */
-#define CONFIG_BOOTCOMMAND "bootp;bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "EP7312 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0500000 /* default load address */
-
-#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=ep7312-0"
-#define MTDPARTS_DEFAULT "mtdparts=ep7312-0:-(jffs2)"
-*/
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 12/52] ARM: remove broken "evb4510" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (10 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 11/52] ARM: remove broken "ep7312" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 13/52] ARM: remove broken "impa7" board Wolfgang Denk
` (41 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/evb4510/Makefile | 51 ----
board/evb4510/config.mk | 27 --
board/evb4510/evb4510.c | 64 -----
board/evb4510/flash.c | 539 -----------------------------------------
board/evb4510/lowlevel_init.S | 157 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/evb4510.h | 180 --------------
9 files changed, 1 insertions(+), 1020 deletions(-)
delete mode 100644 board/evb4510/Makefile
delete mode 100644 board/evb4510/config.mk
delete mode 100644 board/evb4510/evb4510.c
delete mode 100644 board/evb4510/flash.c
delete mode 100644 board/evb4510/lowlevel_init.S
delete mode 100644 include/configs/evb4510.h
diff --git a/MAKEALL b/MAKEALL
index 4edf61d..832119e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- evb4510 \
impa7 \
integratorap \
lpc2292sodimm \
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
deleted file mode 100644
index 102eade..0000000
--- a/board/evb4510/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := evb4510.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/evb4510/config.mk b/board/evb4510/config.mk
deleted file mode 100644
index 140c989..0000000
--- a/board/evb4510/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
-# Curt Brune <curt@cucy.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x007d0000
diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c
deleted file mode 100644
index 13abbb7..0000000
--- a/board/evb4510/evb4510.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_EVB4510
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- icache_enable();
-
- /* address for the kernel command line */
- gd->bd->bi_boot_params = 0x800;
-
- /* enable board LEDs for output */
- PUT_REG( REG_IOPDATA, 0x0);
- PUT_REG( REG_IOPMODE, 0xFFFF);
- PUT_REG( REG_IOPDATA, 0xFF);
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-#if CONFIG_NR_DRAM_BANKS == 2
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
- return 0;
-}
-
-#endif
diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c
deleted file mode 100644
index c9c6e02..0000000
--- a/board/evb4510/flash.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/*
- *
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-typedef enum {
- FLASH_DEV_U9_512KB = 0,
- FLASH_DEV_U7_2MB = 1
-} FLASH_DEV;
-
-#define FLASH_DQ7 (0x80)
-#define FLASH_DQ5 (0x20)
-
-#define PROG_ADDR (0xAAA)
-#define SETUP_ADDR (0xAAA)
-#define ID_ADDR (0xAAA)
-#define UNLOCK_ADDR1 (0xAAA)
-#define UNLOCK_ADDR2 (0x555)
-
-#define UNLOCK_CMD1 (0xAA)
-#define UNLOCK_CMD2 (0x55)
-#define ERASE_SUSPEND_CMD (0xB0)
-#define ERASE_RESUME_CMD (0x30)
-#define RESET_CMD (0xF0)
-#define ID_CMD (0x90)
-#define SELECT_CMD (0x90)
-#define CHIPERASE_CMD (0x10)
-#define BYPASS_CMD (0x20)
-#define SECERASE_CMD (0x30)
-#define PROG_CMD (0xa0)
-#define SETUP_CMD (0x80)
-
-#if 0
-#define WRITE_UNLOCK(addr) { \
- PUT__U8( addr + UNLOCK_ADDR1, UNLOCK_CMD1); \
- PUT__U8( addr + UNLOCK_ADDR2, UNLOCK_CMD2); \
-}
-
-/* auto select command */
-#define CMD_ID(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, ID_CMD); \
-}
-
-#define CMD_RESET(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, RESET_CMD); \
-}
-
-#define CMD_ERASE_SEC(base, addr) WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
- WRITE_UNLOCK(base); \
- PUT__U8( addr, SECERASE_CMD);
-
-#define CMD_ERASE_CHIP(base) WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
- WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, CHIPERASE_CMD);
-
-/* prepare for bypass programming */
-#define CMD_UNLOCK_BYPASS(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, 0x20); \
-}
-
-/* terminate bypass programming */
-#define CMD_BYPASS_RESET(addr) { \
- PUT__U8(addr, 0x90); \
- PUT__U8(addr, 0x00); \
-}
-#endif
-
-inline static void FLASH_CMD_UNLOCK (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- PUT__U8 (base + 0xAAA, 0xAA);
- PUT__U8 (base + 0x555, 0x55);
- break;
- case FLASH_DEV_U9_512KB:
- PUT__U8 (base + 0x555, 0xAA);
- PUT__U8 (base + 0x2AA, 0x55);
- break;
- }
-}
-
-inline static void FLASH_CMD_SELECT (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SELECT_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SELECT_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_RESET (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, RESET_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, RESET_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_ERASE_SEC (FLASH_DEV dev, u32 base, u32 addr)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (addr, SECERASE_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (addr, SECERASE_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_ERASE_CHIP (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base, CHIPERASE_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base, CHIPERASE_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_UNLOCK_BYPASS (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, BYPASS_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, BYPASS_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_BYPASS_RESET (FLASH_DEV dev, u32 base)
-{
- PUT__U8 (base, SELECT_CMD);
- PUT__U8 (base, 0x0);
-}
-
-/* poll for flash command completion */
-static u16 _flash_poll (FLASH_DEV dev, u32 addr, u16 data, ulong timeOut)
-{
- u32 done = 0;
- ulong t0;
-
- u16 error = 0;
- volatile u16 flashData;
-
- data = data & 0xFF;
- t0 = get_timer (0);
- while (get_timer (t0) < timeOut) {
- /* for( i = 0; i < POLL_LOOPS; i++) { */
- /* Read the Data */
- flashData = GET__U8 (addr);
-
- /* FLASH_DQ7 = Data? */
- if ((flashData & FLASH_DQ7) == (data & FLASH_DQ7)) {
- done = 1;
- break;
- }
-
- /* Check Timeout (FLASH_DQ5==1) */
- if (flashData & FLASH_DQ5) {
- /* Read the Data */
- flashData = GET__U8 (addr);
-
- /* FLASH_DQ7 = Data? */
- if (!((flashData & FLASH_DQ7) == (data & FLASH_DQ7))) {
- printf ("_flash_poll(): FLASH_DQ7 & flashData not equal to write value\n");
- error = ERR_PROG_ERROR;
- }
- FLASH_CMD_RESET (dev, addr);
- done = 1;
- break;
- }
- /* spin delay */
- udelay (10);
- }
-
-
- /* error update */
- if (!done) {
- printf ("_flash_poll(): Timeout\n");
- error = ERR_TIMOUT;
- }
-
- /* Check the data */
- if (!error) {
- /* Read the Data */
- flashData = GET__U8 (addr);
- if (flashData != data) {
- error = ERR_PROG_ERROR;
- printf ("_flash_poll(): flashData(0x%04x) not equal to data(0x%04x)\n",
- flashData, data);
- }
- }
-
- return error;
-}
-
-/*-----------------------------------------------------------------------
- */
-static int _flash_check_protection (flash_info_t * info, int s_first, int s_last)
-{
- int sect, prot = 0;
-
- for (sect = s_first; sect <= s_last; sect++)
- if (info->protect[sect]) {
- printf (" Flash sector %d protected.\n", sect);
- prot++;
- }
- return prot;
-}
-
-static int _detectFlash (FLASH_DEV dev, u32 base, u8 venId, u8 devId)
-{
-
- u32 baseAddr = base | CACHE_DISABLE_MASK;
- u8 vendorId, deviceId;
-
- /* printf(__FUNCTION__"(): detecting flash @ 0x%08x\n", base); */
-
- /* Send auto select command and read manufacturer info */
- FLASH_CMD_SELECT (dev, baseAddr);
- vendorId = GET__U8 (baseAddr);
- FLASH_CMD_RESET (dev, baseAddr);
-
- /* Send auto select command and read device info */
- FLASH_CMD_SELECT (dev, baseAddr);
-
- if (dev == FLASH_DEV_U7_2MB) {
- deviceId = GET__U8 (baseAddr + 2);
- } else if (dev == FLASH_DEV_U9_512KB) {
- deviceId = GET__U8 (baseAddr + 1);
- } else {
- return 0;
- }
-
- FLASH_CMD_RESET (dev, baseAddr);
-
- /* printf (__FUNCTION__"(): found vendorId 0x%04x, deviceId 0x%04x\n",
- vendorId, deviceId);
- */
-
- return (vendorId == venId) && (deviceId == devId);
-
-}
-
-/******************************************************************************
- *
- * Public u-boot interface functions below
- *
- *****************************************************************************/
-
-/***************************************************************************
- *
- * Flash initialization
- *
- * This board has two banks of flash, but the base addresses depend on
- * how the board is jumpered.
- *
- * The two flash types are:
- *
- * AMD Am29LV160DB (2MB) sectors layout 16KB, 2x8KB, 32KB, 31x64KB
- *
- * AMD Am29LV040B (512KB) sectors: 8x64KB
- *****************************************************************************/
-
-unsigned long flash_init (void)
-{
- flash_info_t *info;
- u16 i;
- u32 flashtest;
- s16 amd160 = -1;
- u32 amd160base = 0;
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- s16 amd040 = -1;
- u32 amd040base = 0;
-#endif
-
- /* configure PHYS_FLASH_1 */
- if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) {
- amd160 = 0;
- amd160base = PHYS_FLASH_1;
-#if CONFIG_SYS_MAX_FLASH_BANKS == 1
- }
-#else
- if (_detectFlash
- (FLASH_DEV_U9_512KB, PHYS_FLASH_2, 0x1, 0x4F)) {
- amd040 = 1;
- amd040base = PHYS_FLASH_2;
- } else {
- printf (__FUNCTION__
- "(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
- PHYS_FLASH_2);
- }
- } else if (_detectFlash (FLASH_DEV_U9_512KB, PHYS_FLASH_1, 0x1, 0x4F)) {
- amd040 = 0;
- amd040base = PHYS_FLASH_1;
- if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_2, 0x1, 0x49)) {
- amd160 = 1;
- amd160base = PHYS_FLASH_2;
- } else {
- printf (__FUNCTION__
- "(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
- PHYS_FLASH_2);
- }
- }
-#endif
- else {
- printf ("flash_init(): Unable to detect PHYS_FLASH_1: 0x%08x\n",
- PHYS_FLASH_1);
- }
-
- /* Configure AMD Am29LV160DB (2MB) */
- info = &flash_info[amd160];
- info->flash_id = FLASH_DEV_U7_2MB;
- info->sector_count = 35;
- info->size = 2 * 1024 * 1024; /* 2MB */
- /* 1*16K Boot Block
- 2*8K Parameter Block
- 1*32K Small Main Block */
- info->start[0] = amd160base;
- info->start[1] = amd160base + 0x4000;
- info->start[2] = amd160base + 0x6000;
- info->start[3] = amd160base + 0x8000;
- for (i = 1; i < info->sector_count; i++)
- info->start[3 + i] = amd160base + i * (64 * 1024);
-
- for (i = 0; i < info->sector_count; i++) {
- /* Write auto select command sequence and query sector protection */
- FLASH_CMD_SELECT (info->flash_id,
- info->start[i] | CACHE_DISABLE_MASK);
- flashtest =
- GET__U8 (((info->start[i] + 4) | CACHE_DISABLE_MASK));
- FLASH_CMD_RESET (info->flash_id,
- amd160base | CACHE_DISABLE_MASK);
- info->protect[i] = (flashtest & 0x0001);
- }
-
- /*
- * protect monitor and environment sectors in 2MB flash
- */
- flash_protect (FLAG_PROTECT_SET,
- amd160base, amd160base + monitor_flash_len - 1, info);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, info);
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- /* Configure AMD Am29LV040B (512KB) */
- info = &flash_info[amd040];
- info->flash_id = FLASH_DEV_U9_512KB;
- info->sector_count = 8;
- info->size = 512 * 1024; /* 512KB, 8 x 64KB */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = amd040base + i * (64 * 1024);
- /* Write auto select command sequence and query sector protection */
- FLASH_CMD_SELECT (info->flash_id,
- info->start[i] | CACHE_DISABLE_MASK);
- flashtest =
- GET__U8 (((info->start[i] + 2) | CACHE_DISABLE_MASK));
- FLASH_CMD_RESET (info->flash_id,
- amd040base | CACHE_DISABLE_MASK);
- info->protect[i] = (flashtest & 0x0001);
- }
-#endif
-
- return flash_info[0].size
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- + flash_info[1].size
-#endif
- ;
-}
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_DEV_U7_2MB) {
- printf ("AMD Am29LV160DB (2MB) 16KB,2x8KB,32KB,31x64KB\n");
- } else if (info->flash_id == FLASH_DEV_U9_512KB) {
- printf ("AMD Am29LV040B (512KB) 8x64KB\n");
- } else {
- printf ("Unknown flash_id ...\n");
- return;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 4) == 0)
- printf ("\n ");
- printf (" S%02d @ 0x%08lX%s", i,
- info->start[i], info->protect[i] ? " !" : " ");
- }
- printf ("\n");
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- u16 i, error = 0;
-
- printf ("\n");
-
- /* check flash protection bits */
- if (_flash_check_protection (info, s_first, s_last)) {
- printf (" Flash erase aborted due to protected sectors\n");
- return ERR_PROTECTED;
- }
-
- if ((s_first < info->sector_count) && (s_first <= s_last)) {
- for (i = s_first; i <= s_last && !error; i++) {
- printf (" Erasing Sector %d @ 0x%08lx ... ", i,
- info->start[i]);
- /* bypass the cache to access the flash memory */
- FLASH_CMD_ERASE_SEC (info->flash_id,
- (info->
- start[0] | CACHE_DISABLE_MASK),
- (info->
- start[i] | CACHE_DISABLE_MASK));
- /* look for sector to become 0xFF after erase */
- error = _flash_poll (info->flash_id,
- info->
- start[i] | CACHE_DISABLE_MASK,
- 0xFF, CONFIG_SYS_FLASH_ERASE_TOUT);
- FLASH_CMD_RESET (info->flash_id,
- (info->
- start[0] | CACHE_DISABLE_MASK));
- printf ("done\n");
- if (error) {
- break;
- }
- }
- } else
- error = ERR_INVAL;
-
- return error;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- u16 error = 0, i;
- u32 n;
- u8 *bp, *bps;
-
- /* Write Setup */
- /* bypass the cache to access the flash memory */
- FLASH_CMD_UNLOCK_BYPASS (info->flash_id,
- (info->start[0] | CACHE_DISABLE_MASK));
-
- /* Write the Data to Flash */
-
- bp = (u8 *) (addr | CACHE_DISABLE_MASK);
- bps = (u8 *) src;
-
- for (n = 0; n < cnt && !error; n++, bp++, bps++) {
-
- if (!(n % (cnt / 15))) {
- printf (".");
- }
-
- /* write the flash command for flash memory */
- *bp = 0xA0;
-
- /* Write the data */
- *bp = *bps;
-
- /* Check if the write is done */
- for (i = 0; i < 0xff; i++);
- error = _flash_poll (info->flash_id, (u32) bp, *bps,
- CONFIG_SYS_FLASH_WRITE_TOUT);
- if (error) {
- return error;
- }
- }
-
- /* Reset the Flash Mode to read */
- FLASH_CMD_BYPASS_RESET (info->flash_id, info->start[0]);
-
- printf (" ");
-
- return error;
-}
diff --git a/board/evb4510/lowlevel_init.S b/board/evb4510/lowlevel_init.S
deleted file mode 100644
index 7184d72..0000000
--- a/board/evb4510/lowlevel_init.S
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-#include <asm/hardware.h>
-
-/***********************************************************************
- * Configure Memory Map
- *
- * This memory map allows us to relocate from FLASH to SRAM. After
- * power-on reset the CPU only knows about the FLASH memory at address
- * 0x00000000. After lowlevel_init completes the memory map will be:
- *
- * Memory Addr
- * 0x00000000
- * to 8MB SRAM (U5) -- 8MB Map
- * 0x00800000
- *
- * 0x01000000
- * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map
- * 0x01200000
- *
- * 0x02000000
- * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map
- * 0x02080000
- *
- * Load all 12 memory registers with the STMIA instruction since
- * memory access is disabled once these registers are written. The
- * last register written re-enables memory access. For more info see
- * the user's manual for the S3C4510B, available from Samsung's web
- * site. Search for part number "S3C4510B".
- *
- ***********************************************************************/
-
-.globl lowlevel_init
-lowlevel_init:
-
- /* preserve the temp register (r12 AKA ip) and remap it. */
- ldr r1, =SRAM_BASE+0xC
- add r0, r12, #0x01000000
- str r0, [r1]
-
- /* remap the link register for when we return */
- add lr, lr, #0x01000000
-
- /* store a short program in the on chip SRAM, which is
- * unaffected when remapping memory. Note the cache must be
- * disabled for the on chip SRAM to be available.
- */
- ldr r1, =SRAM_BASE
- ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */
- str r0, [r1]
- add r1, r1, #4
- ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */
- str r0, [r1]
- add r1, r1, #4
- ldr r0, =0xe1a0f00e /* mov pc, lr */
- str r0, [r1]
-
- adr r0, memory_map_data
- ldmia r0, {r1-r12}
- ldr r0, =REG_EXTDBWTH
-
- ldr pc, =SRAM_BASE
-
-.globl reset_cpu
-reset_cpu:
- /*
- * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to
- * address 0x0. We accomplish this by storing a few
- * instructions into the on chip SRAM (8KB) and run from
- * there. Note the cache must be disabled for the on chip
- * SRAM to be available.
- *
- * load r2 with REG_ROMCON0
- * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000
- * load r4 with REG_DRAMCON0
- * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000
- * load r6 with REG_REFEXTCON
- * load r7 with 0x9c218360
- * load r8 with 0x0
- * store str r3,[r2] @ SRAM_BASE
- * store str r5,[r4] @ SRAM_BASE + 0x4
- * store str r7,[r6] @ SRAM_BASE + 0x8
- * store mov pc,r8 @ SRAM_BASE + 0xC
- * mov pc, SRAM_BASE
- *
- */
-
- /* disable cache */
- ldr r0, =REG_SYSCFG
- ldr r1, =0x83ffffa0 /* cache-disabled */
- str r1, [r0]
-
- ldr r2, =REG_ROMCON0
- ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */
- ldr r4, =REG_DRAMCON0
- ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */
- ldr r6, =REG_REFEXTCON
- ldr r7, =0xce278360
- ldr r8, =0x00000000
- ldr r1, =SRAM_BASE
- ldr r0, =0xe5823000 /* str r3, [r2] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+4
- ldr r0, =0xe5845000 /* str r5, [r4] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+8
- ldr r0, =0xe5867000 /* str r7, [r6] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+0xC
- ldr r0, =0xe1a0f008 /* mov pc, r8 */
- str r0, [r1]
- ldr r1, =SRAM_BASE
- mov pc, r1
-
- /* never return */
-
-/************************************************************************
- * Below are twelve 32-bit values for the twelve memory registers of
- * the system manager, starting with register REG_EXTDBWTH.
- ***********************************************************************/
-memory_map_data:
- .long 0x00f03005 /* memory widths */
- .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */
- .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x9c218360 /* enable memory */
diff --git a/boards.cfg b/boards.cfg
index b5ad378..6e24534 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,7 +45,6 @@ impa7 arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
SMN42 arm arm720t - siemens lpc2292
-evb4510 arm arm720t - - s3c4510b
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7200f16..8ccda3b 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+evb4510 arm arm720t - 2011-07-16
ep7312 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
deleted file mode 100644
index 23a2efa..0000000
--- a/include/configs/evb4510.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * Configuation settings for evb4510 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- *
- * Also swap the flash1 and flash2 addresses during debug.
- *
- * #define CONFIG_SKIP_LOWLEVEL_INIT
- */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */
-#define CONFIG_EVB4510 1 /* on an EVB4510 Board */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024)
-#define CONFIG_STACKSIZE_FIQ (4*1024)
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_S3C4510_ETH 1
-#define CONFIG_DRIVER_S3C4510_I2C 1
-#define CONFIG_DRIVER_S3C4510_UART 1
-#define CONFIG_DRIVER_S3C4510_FLASH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use Serial line 1, could also use 2 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 19200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ETHADDR 00:40:95:36:35:33
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.11
-#define CONFIG_SERVERIP 10.0.0.1
-#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTCOMMAND "tftp 100000 uImage"
-/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "evb4510 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_CMDLINE_TAG /* allow passing of command line args to linux */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00000000 /* default load address */
-
-#define CONFIG_SYS_SYS_CLK_FREQ 50000000 /* CPU freq: 50 MHz */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 KHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map after relocation
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1 0x01000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip, 8bit access) */
-
-#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
-#define PHYS_FLASH_2_SIZE 0x00080000 /* 512KB (one chip, 8bit access) */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (4*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000) /* environment start address */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE 0x1000 /* max size for environment */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 13/52] ARM: remove broken "impa7" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (11 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 12/52] ARM: remove broken "evb4510" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board Wolfgang Denk
` (40 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Marius Gr?ger <mag@sysgo.de>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/impa7/Makefile | 51 ------
board/impa7/config.mk | 28 ----
board/impa7/flash.c | 357 -------------------------------------------
board/impa7/impa7.c | 71 ---------
board/impa7/lowlevel_init.S | 85 ----------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/impa7.h | 174 ---------------------
10 files changed, 1 insertions(+), 772 deletions(-)
delete mode 100644 board/impa7/Makefile
delete mode 100644 board/impa7/config.mk
delete mode 100644 board/impa7/flash.c
delete mode 100644 board/impa7/impa7.c
delete mode 100644 board/impa7/lowlevel_init.S
delete mode 100644 include/configs/impa7.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a7a246a..a3d34a2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -648,10 +648,6 @@ Simon Guinot <simon.guinot@sequanux.org>
netspace_v2 ARM926EJS (Kirkwood SoC)
netspace_max_v2 ARM926EJS (Kirkwood SoC)
-Marius Gr?ger <mag@sysgo.de>
-
- impa7 ARM720T (EP7211)
-
Igor Grinberg <grinberg@compulab.co.il>
cm-t35 ARM ARMV7 (OMAP3xx Soc)
diff --git a/MAKEALL b/MAKEALL
index 832119e..9134c00 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- impa7 \
integratorap \
lpc2292sodimm \
modnet50 \
diff --git a/board/impa7/Makefile b/board/impa7/Makefile
deleted file mode 100644
index 79b12a2..0000000
--- a/board/impa7/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := impa7.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/impa7/config.mk b/board/impa7/config.mk
deleted file mode 100644
index 15e7f04..0000000
--- a/board/impa7/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1780000
diff --git a/board/impa7/flash.c b/board/impa7/flash.c
deleted file mode 100644
index d0c5880..0000000
--- a/board/impa7/flash.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x800000
-#define MAIN_SECT_SIZE 0x20000
-#define PARAM_SECT_SIZE 0x4000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F320B3T & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else if (i == 1)
- flashbase = PHYS_FLASH_2;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j <= 7) {
- flash_info[i].start[j] =
- flashbase + j * PARAM_SECT_SIZE;
- } else {
- flash_info[i].start[j] =
- flashbase + (j - 7) * MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F320B3T & FLASH_TYPEMASK):
- printf ("28F320F3B (16Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
- Done:;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
-
- *addr = 0x00200020; /* erase setup */
- *addr = 0x00D000D0; /* erase confirm */
-
- while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer_masked () >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = 0x00B000B0; /* suspend erase */
- *addr = 0x00FF00FF; /* reset to read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- *addr = 0x00FF00FF; /* reset to read mode */
- }
- printf ("ok.\n");
- }
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong barf;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((*addr & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* clear status register command */
- *addr = 0x00500050;
-
- /* program set-up command */
- *addr = 0x00400040;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* read status register command */
- *addr = 0x00700070;
-
- /* wait while polling the status register */
- while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0x00B000B0;
- goto outahere;
- }
-
- if (*addr & 0x003A003A) { /* check for error */
- barf = *addr;
- if (barf & 0x003A0000) {
- barf >>= 16;
- } else {
- barf &= 0x0000003A;
- }
- printf ("\nFlash write error %02lx at address %08lx\n", barf, (unsigned long) dest);
- if (barf & 0x0002) {
- printf ("Block locked, not erased.\n");
- rc = ERR_NOT_ERASED;
- goto outahere;
- }
- if (barf & 0x0010) {
- printf ("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (barf & 0x0008) {
- printf ("Vpp Low error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- }
-
-
- outahere:
- /* read array command */
- *addr = 0x00FF00FF;
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c
deleted file mode 100644
index 205b1b3..0000000
--- a/board/impa7/impa7.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number of EP7111 */
- gd->bd->bi_arch_number = MACH_TYPE_EDB7211;
-
- /* location of boot parameters for EP7111 */
- gd->bd->bi_boot_params = 0xc0020100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/impa7/lowlevel_init.S b/board/impa7/lowlevel_init.S
deleted file mode 100644
index 7ce10a2..0000000
--- a/board/impa7/lowlevel_init.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Memory Setup stuff - taken from ???
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-SYSCON2: .long 0x80001100
-MEMCFG1: .long 0x80000180
-MEMCFG2: .long 0x800001C0
-DRFPR: .long 0x80000200
-
-syscon2_mask: .long 0x00000004
-memcfg1_val: .long 0x160c1414
-memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits
-memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6
-drfpr_val: .long 0x00000081
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
- /*
- * DRFPR
- * 64kHz DRAM refresh
- */
- ldr r0, DRFPR
- ldr r1, drfpr_val
- str r1, [r0]
-
- /*
- * SYSCON2: clear bit 2, DRAM is 32 bits wide
- */
- ldr r0, SYSCON2
- ldr r2, [r0]
- ldr r1, syscon2_mask
- bic r2, r2, r1
- str r2, [r0]
-
- /*
- * MEMCFG1
- * Setting up Keyboard at CS3, 8 Bit, 3 Waitstates
- * Setting up CS8900 (Ethernet) at CS2, 32 Bit, 5 Waitstates
- * Setting up flash at CS0 and CS1, 32 Bit, 3 Waitstates
- */
- ldr r0, MEMCFG1
- ldr r1, memcfg1_val
- str r1, [r0]
-
- /*
- * MEMCFG2
- * Setting up ? with 0
- *
- */
- ldr r0, MEMCFG2
- ldr r2, [r0]
- ldr r1, memcfg2_mask
- bic r2, r2, r1
- ldr r1, memcfg2_val
- orr r2, r2, r1
- str r2, [r0]
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 6e24534..2d484b8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -41,7 +41,6 @@ imx31_litekit arm arm1136 - logicpd
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-impa7 arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
SMN42 arm arm720t - siemens lpc2292
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 8ccda3b..778eb97 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+impa7 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
evb4510 arm arm720t - 2011-07-16
ep7312 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
deleted file mode 100644
index 3328e63..0000000
--- a/include/configs/impa7.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the implementa impA7 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_IMPA7 1 /* on an impA7 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#define CONFIG_ARM7_REVD 1 /* enable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000000
-#define CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
-/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5a */
-/*#define CONFIG_NETMASK 255.255.0.0 */
-/*#define CONFIG_IPADDR 172.22.2.128 */
-/*#define CONFIG_SERVERIP 172.22.2.126 */
-/*#define CONFIG_BOOTFILE "impa7" */
-#define CONFIG_BOOTCOMMAND "bootp;bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "impA7 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* default load address */
-
-#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_2 0xc1000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x10000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 16 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00020000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1"
-#define MTDPARTS_DEFAULT "mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)"
-*/
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (12 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 13/52] ARM: remove broken "impa7" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:46 ` Linus Walleij
2011-07-17 22:16 ` [U-Boot] [PATCH 15/52] ARM: remove broken "SMN42" board Wolfgang Denk
` (39 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 3 +--
2 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 9134c00..f1f1ad3 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- integratorap \
lpc2292sodimm \
modnet50 \
SMN42 \
diff --git a/Makefile b/Makefile
index 760111b..89b3832 100644
--- a/Makefile
+++ b/Makefile
@@ -894,7 +894,6 @@ TNY_A9260_config : unconfig
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
-integratorap_config \
ap_config \
ap966_config \
ap922_config \
@@ -1071,7 +1070,7 @@ clean:
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
- $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
+ $(obj)board/armltd/integratorcp/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-17 22:16 ` [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board Wolfgang Denk
@ 2011-07-17 22:46 ` Linus Walleij
2011-07-18 8:33 ` Albert ARIBAUD
0 siblings, 1 reply; 90+ messages in thread
From: Linus Walleij @ 2011-07-17 22:46 UTC (permalink / raw)
To: u-boot
As mentioned I'm assuming maintainership for the integratorap,
patch is on the list since two days or so.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-17 22:46 ` Linus Walleij
@ 2011-07-18 8:33 ` Albert ARIBAUD
2011-07-18 12:00 ` Wolfgang Denk
0 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 8:33 UTC (permalink / raw)
To: u-boot
Hi all,
Le 18/07/2011 00:46, Linus Walleij a ?crit :
> As mentioned I'm assuming maintainership for the integratorap,
> patch is on the list since two days or so.
Patch 14/52 marked 'deferred' in patchwork pending inclusion of
integratorap patches.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-18 8:33 ` Albert ARIBAUD
@ 2011-07-18 12:00 ` Wolfgang Denk
2011-07-18 19:33 ` Linus Walleij
0 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 12:00 UTC (permalink / raw)
To: u-boot
Dear Linus, dear Albert ARIBAUD,
In message <4E23EFE4.8030409@aribaud.net> Albert ARIBAUD wrote:
>
> Le 18/07/2011 00:46, Linus Walleij a ?crit :
> > As mentioned I'm assuming maintainership for the integratorap,
> > patch is on the list since two days or so.
>
> Patch 14/52 marked 'deferred' in patchwork pending inclusion of
> integratorap patches.
The situation is more complex here.
The patches that have been submitted jus tfix the immediate compile
problems, but they don't fix the mess we have with the
board/armltd/integrator/split_by_variant.sh script. Actually nobody
ever bothered to convert these boards to use boards.cfg instead.
And split_by_variant.sh makes it virtually impossible to see which
board is doing what, so I decided to get rid of this alltogether.
Linus, do you see a way to adapt the board(s) you are taking
responibility for to using configuration through bopards.cfg, so we
can get rid of the split_by_variant.sh stuff?
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Microsoft Compatibility:
your old Windows 3.11 application crash exactly as the new ones.
^ permalink raw reply [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-18 12:00 ` Wolfgang Denk
@ 2011-07-18 19:33 ` Linus Walleij
2011-08-12 13:05 ` Albert ARIBAUD
0 siblings, 1 reply; 90+ messages in thread
From: Linus Walleij @ 2011-07-18 19:33 UTC (permalink / raw)
To: u-boot
On Mon, Jul 18, 2011 at 2:00 PM, Wolfgang Denk <wd@denx.de> wrote:
> Linus, do you see a way to adapt the board(s) you are taking
> responibility for to using configuration through bopards.cfg, so we
> can get rid of the split_by_variant.sh stuff?
I will try, it doesn't look too hard.
The integrator[ap|cp] are special in that any core module (CM)
can be plugged onto the actual board itself, so the same board
permutes in a number of variants. But I guess I can just give
them all unique names like integratorap_cm920t etc and it'll
just work, I'll hack something up so we can see what it'll look
like.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board
2011-07-18 19:33 ` Linus Walleij
@ 2011-08-12 13:05 ` Albert ARIBAUD
0 siblings, 0 replies; 90+ messages in thread
From: Albert ARIBAUD @ 2011-08-12 13:05 UTC (permalink / raw)
To: u-boot
Hi Linus, Wolfgang,
On 18/07/2011 21:33, Linus Walleij wrote:
> On Mon, Jul 18, 2011 at 2:00 PM, Wolfgang Denk<wd@denx.de> wrote:
>
>> Linus, do you see a way to adapt the board(s) you are taking
>> responibility for to using configuration through bopards.cfg, so we
>> can get rid of the split_by_variant.sh stuff?
>
> I will try, it doesn't look too hard.
>
> The integrator[ap|cp] are special in that any core module (CM)
> can be plugged onto the actual board itself, so the same board
> permutes in a number of variants. But I guess I can just give
> them all unique names like integratorap_cm920t etc and it'll
> just work, I'll hack something up so we can see what it'll look
> like.
>
> Thanks,
> Linus Walleij
Boards now build again thanks to Linus' patchset. Therefore I have
marked this patch 14/52 'Not Applicable'.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 15/52] ARM: remove broken "SMN42" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (13 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 14/52] ARM: remove broken "integratorap" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 16/52] ARM: remove broken "lpc2292sodimm" board Wolfgang Denk
` (38 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/SMN42.h | 201 -----------------------------------------------
4 files changed, 1 insertions(+), 203 deletions(-)
delete mode 100644 include/configs/SMN42.h
diff --git a/MAKEALL b/MAKEALL
index f1f1ad3..02a6614 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM7=" \
lpc2292sodimm \
modnet50 \
- SMN42 \
"
#########################################################################
diff --git a/boards.cfg b/boards.cfg
index 2d484b8..6d06d03 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -43,7 +43,6 @@ omap2420h4 arm arm1136 - ti
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
-SMN42 arm arm720t - siemens lpc2292
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 778eb97..5561f77 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+SMN42 arm arm720t - 2011-07-16
impa7 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
evb4510 arm arm720t - 2011-07-16
ep7312 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
deleted file mode 100644
index 4a8acab..0000000
--- a/include/configs/SMN42.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Configuation settings for the SMN42 board from Siemens.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#define CONFIG_LPC2292
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LPC2292_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-/* this would be 0xAE if E0, E1 and E2 were pulled high */
-#define CONFIG_SYS_I2C_SLAVE 0xA0
-#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA0 >> 1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-/* not used but required by devices.c */
-#define CONFIG_SYS_I2C_SPEED 10000
-
-#ifdef CONFIG_SOFT_I2C
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define SCL 0x00000004 /* P0.2 */
-#define SDA 0x00000008 /* P0.3 */
-
-#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0)
-#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); }
-#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); }
-#define I2C_DELAY { udelay(100); }
-#define I2C_ACTIVE { unsigned int i2ctmp; \
- i2ctmp = GET32(IO0DIR); \
- i2ctmp |= SDA; \
- PUT32(IO0DIR, i2ctmp); }
-#define I2C_TRISTATE { unsigned int i2ctmp; \
- i2ctmp = GET32(IO0DIR); \
- i2ctmp &= ~SDA; \
- PUT32(IO0DIR, i2ctmp); }
-#endif /* CONFIG_SOFT_I2C */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_BOOTDELAY 5
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMN42 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x81800000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
- /* for uClinux img is here*/
-
-#define CONFIG_SYS_SYS_CLK_FREQ 58982400 /* Hz */
-#define CONFIG_SYS_HZ 2048 /* decrementer freq in Hz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */
-#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */
-
-/* This is the external flash */
-#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/*
- * The first entry in CONFIG_SYS_FLASH_BANKS_LIST is a dummy, but it must be present.
- */
-#define CONFIG_SYS_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 }
-#define CONFIG_SYS_FLASH_ADDR0 0x555
-#define CONFIG_SYS_FLASH_ADDR1 0x2AA
-#define CONFIG_SYS_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-/* The Environment Sector is in the CPU-internal flash */
-#define CONFIG_SYS_FLASH_BASE 0
-#define CONFIG_ENV_OFFSET 0x3C000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_MMC 1
-/* we use this ethernet chip */
-#define CONFIG_ENC28J60_LPC2292
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 16/52] ARM: remove broken "lpc2292sodimm" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (14 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 15/52] ARM: remove broken "SMN42" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 17/52] ARM: remove broken "modnet50" board Wolfgang Denk
` (37 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/lpc2292sodimm/Makefile | 51 -------
board/lpc2292sodimm/config.mk | 30 ----
board/lpc2292sodimm/flash.c | 252 -----------------------------------
board/lpc2292sodimm/lowlevel_init.S | 87 ------------
board/lpc2292sodimm/lpc2292sodimm.c | 57 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/lpc2292sodimm.h | 159 ----------------------
9 files changed, 1 insertions(+), 638 deletions(-)
delete mode 100644 board/lpc2292sodimm/Makefile
delete mode 100644 board/lpc2292sodimm/config.mk
delete mode 100644 board/lpc2292sodimm/flash.c
delete mode 100644 board/lpc2292sodimm/lowlevel_init.S
delete mode 100644 board/lpc2292sodimm/lpc2292sodimm.c
delete mode 100644 include/configs/lpc2292sodimm.h
diff --git a/MAKEALL b/MAKEALL
index 02a6614..a54b46b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- lpc2292sodimm \
modnet50 \
"
diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile
deleted file mode 100644
index c1a5b0b..0000000
--- a/board/lpc2292sodimm/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := flash.o lpc2292sodimm.o
-SOBJTS := lowlevel_init.o
-
-SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJTS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpc2292sodimm/config.mk b/board/lpc2292sodimm/config.mk
deleted file mode 100644
index 4891792..0000000
--- a/board/lpc2292sodimm/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x81500000
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
deleted file mode 100644
index fd5389f..0000000
--- a/board/lpc2292sodimm/flash.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * Modified to use the routines in arch/arm/cpu/arm720t/lpc2292/flash.c by
- * Gary Jennejohn <garyj@denx,de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-#define SST_BASEADDR 0x80000000
-#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1)))
-#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
-extern int lpc2292_flash_erase(flash_info_t *, int, int);
-extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
-
-/*-----------------------------------------------------------------------
- *
- */
-void write_word_sst(ulong addr, ushort data)
-{
- ushort tmp;
-
- *SST_ADDR1 = 0x00AA;
- *SST_ADDR2 = 0x0055;
- *SST_ADDR1 = 0x00A0;
- *((volatile ushort*)addr) = data;
- /* do data polling */
- do {
- tmp = *((volatile ushort*)addr);
- } while (tmp != data);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int j, k;
- ulong size = 0;
- ulong flashbase = 0;
-
- flash_info[0].flash_id = (PHILIPS_LPC2292 & FLASH_VENDMASK);
- flash_info[0].size = 0x003E000; /* 256 - 8 KB */
- flash_info[0].sector_count = 17;
- memset (flash_info[0].protect, 0, 17);
- flashbase = 0x00000000;
- for (j = 0, k = 0; j < 8; j++, k++) {
- flash_info[0].start[k] = flashbase;
- flashbase += 0x00002000;
- }
- for (j = 0; j < 2; j++, k++) {
- flash_info[0].start[k] = flashbase;
- flashbase += 0x00010000;
- }
- for (j = 0; j < 7; j++, k++) {
- flash_info[0].start[k] = flashbase;
- flashbase += 0x00002000;
- }
- size += flash_info[0].size;
-
- flash_info[1].flash_id = (SST_MANUFACT & FLASH_VENDMASK);
- flash_info[1].size = 0x00200000; /* 2 MB */
- flash_info[1].sector_count = 512;
- memset (flash_info[1].protect, 0, 512);
- flashbase = SST_BASEADDR;
- for (j=0; j<512; j++) {
- flash_info[1].start[j] = flashbase;
- flashbase += 0x1000; /* 4 KB sectors */
- }
- size += flash_info[1].size;
-
- /* Protect monitor and environment sectors */
- flash_protect (FLAG_PROTECT_SET,
- 0x0,
- 0x0 + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
- int erased = 0;
- unsigned long j;
- unsigned long count;
- unsigned char *p;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (SST_MANUFACT & FLASH_VENDMASK):
- printf("SST: ");
- break;
- case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- printf("Philips: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- if (i < (info->sector_count - 1)) {
- count = info->start[i+1] - info->start[i];
- }
- else {
- count = info->start[0] + info->size - info->start[i];
- }
- p = (unsigned char*)(info->start[i]);
- erased = 1;
- for (j = 0; j < count; j++) {
- if (*p != 0xFF) {
- erased = 0;
- break;
- }
- p++;
- }
- printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ",
- erased ? " E" : " ");
- }
- printf ("\n");
-}
-
-int flash_erase_sst (flash_info_t * info, int s_first, int s_last)
-{
- int i;
-
- for (i = s_first; i <= s_last; i++) {
- *SST_ADDR1 = 0x00AA;
- *SST_ADDR2 = 0x0055;
- *SST_ADDR1 = 0x0080;
- *SST_ADDR1 = 0x00AA;
- *SST_ADDR2 = 0x0055;
- *((volatile ushort*)(info->start[i])) = 0x0030;
- /* wait for erase to finish */
- udelay(25000);
- }
-
- return ERR_OK;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- switch (info->flash_id & FLASH_VENDMASK) {
- case (SST_MANUFACT & FLASH_VENDMASK):
- return flash_erase_sst(info, s_first, s_last);
- case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return lpc2292_flash_erase(info, s_first, s_last);
- default:
- return ERR_PROTECTED;
- }
- return ERR_PROTECTED;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- *
- * cnt is in bytes
- */
-
-int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ushort tmp;
- ulong i;
- uchar* src_org;
- uchar* dst_org;
- ulong cnt_org = cnt;
- int ret = ERR_OK;
-
- src_org = src;
- dst_org = (uchar*)addr;
-
- if (addr & 1) { /* if odd address */
- tmp = *((uchar*)(addr - 1)); /* little endian */
- tmp |= (*src << 8);
- write_word_sst(addr - 1, tmp);
- addr += 1;
- cnt -= 1;
- src++;
- }
- while (cnt > 1) {
- tmp = ((*(src+1)) << 8) + (*src); /* little endian */
- write_word_sst(addr, tmp);
- addr += 2;
- src += 2;
- cnt -= 2;
- }
- if (cnt > 0) {
- tmp = (*((uchar*)(addr + 1))) << 8;
- tmp |= *src;
- write_word_sst(addr, tmp);
- }
-
- for (i = 0; i < cnt_org; i++) {
- if (*dst_org != *src_org) {
- printf("Write failed. Byte %lX differs\n", i);
- ret = ERR_PROG_ERROR;
- break;
- }
- dst_org++;
- src_org++;
- }
-
- return ret;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- switch (info->flash_id & FLASH_VENDMASK) {
- case (SST_MANUFACT & FLASH_VENDMASK):
- return write_buff_sst(info, src, addr, cnt);
- case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return lpc2292_write_buff(info, src, addr, cnt);
- default:
- return ERR_PROG_ERROR;
- }
- return ERR_PROG_ERROR;
-}
diff --git a/board/lpc2292sodimm/lowlevel_init.S b/board/lpc2292sodimm/lowlevel_init.S
deleted file mode 100644
index f579a1a..0000000
--- a/board/lpc2292sodimm/lowlevel_init.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/hardware.h>
-
-/* some parameters for the board */
-/* setting up the memory */
-#define SRAM_START 0x40000000
-#define SRAM_SIZE 0x00004000
-#define BCFG0_VALUE 0x1000ffef
-#define BCFG1_VALUE 0x10001C61
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-MEMMAP_ADR:
- .word MEMMAP
-BCFG0_ADR:
- .word BCFG0
-_BCFG0_VALUE:
- .word BCFG0_VALUE
-BCFG1_ADR:
- .word BCFG1
-_BCFG1_VALUE:
- .word BCFG1_VALUE
-PINSEL2_ADR:
- .word PINSEL2
-PINSEL2_MASK:
- .word 0x00000000
-PINSEL2_VALUE:
- .word 0x0F800914
-
-.extern _start
-
-.globl lowlevel_init
-lowlevel_init:
- /* set up memory control register for bank 0 */
- ldr r0, _BCFG0_VALUE
- ldr r1, BCFG0_ADR
- str r0, [r1]
-
- /* set up memory control register for bank 1 */
- ldr r0, _BCFG1_VALUE
- ldr r1, BCFG1_ADR
- str r0, [r1]
-
- /* set up PINSEL2 for bus-pins */
- ldr r0, PINSEL2_ADR
- ldr r1, [r0]
- ldr r2, PINSEL2_MASK
- ldr r3, PINSEL2_VALUE
- and r1, r1, r2
- orr r1, r1, r3
- str r1, [r0]
-
- /* move vectors to beginning of SRAM */
- mov r2, #SRAM_START
- mov r0, #0 /*_start*/
- ldmneia r0!, {r3-r10}
- stmneia r2!, {r3-r10}
- ldmneia r0, {r3-r9}
- stmneia r2, {r3-r9}
-
- /* Set-up MEMMAP register, so vectors are taken from SRAM */
- ldr r0, MEMMAP_ADR
- mov r1, #0x02 /* vectors re-mapped to static RAM */
- str r1, [r0]
-
- /* everything is fine now */
- mov pc, lr
diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c
deleted file mode 100644
index 9c2d1af..0000000
--- a/board/lpc2292sodimm/lpc2292sodimm.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_ARMADILLO - not official*/
- gd->bd->bi_arch_number = 83;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
diff --git a/boards.cfg b/boards.cfg
index 6d06d03..6140a72 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -42,7 +42,6 @@ mx35pdk arm arm1136 - freesca
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
modnet50 arm arm720t
-lpc2292sodimm arm arm720t - - lpc2292
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5561f77..0020ff4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+lpc2292sodimm arm arm720t - 2011-07-16
SMN42 arm arm720t - 2011-07-16
impa7 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
evb4510 arm arm720t - 2011-07-16
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
deleted file mode 100644
index 17972d7..0000000
--- a/include/configs/lpc2292sodimm.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#define CONFIG_LPC2292
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LPC2292_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_BOOTDELAY 5
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPC2292SODIMM # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x40000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for */
- /* armadillo: kernel img is here*/
-
-#define CONFIG_SYS_SYS_CLK_FREQ 58982400 /* Hz */
-#define CONFIG_SYS_HZ 2048 /* decrementer freq in Hz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x81000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB SDRAM */
-
-#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00200000 /* 2 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (0x0 + 0x3C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_MMC 1
-/* we use this ethernet chip */
-#define CONFIG_ENC28J60_LPC2292
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 17/52] ARM: remove broken "modnet50" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (15 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 16/52] ARM: remove broken "lpc2292sodimm" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 18/52] ARM: remove broken "ap920t" board Wolfgang Denk
` (36 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Thomas Elste <info@elste.org>
---
MAINTAINERS | 4 -
MAKEALL | 9 -
board/modnet50/Makefile | 51 ----
board/modnet50/config.mk | 29 ---
board/modnet50/flash.c | 536 ----------------------------------------
board/modnet50/lowlevel_init.S | 204 ---------------
board/modnet50/modnet50.c | 49 ----
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/modnet50.h | 196 ---------------
10 files changed, 1 insertions(+), 1079 deletions(-)
delete mode 100644 board/modnet50/Makefile
delete mode 100644 board/modnet50/config.mk
delete mode 100644 board/modnet50/flash.c
delete mode 100644 board/modnet50/lowlevel_init.S
delete mode 100644 board/modnet50/modnet50.c
delete mode 100644 include/configs/modnet50.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a3d34a2..c4c77d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -623,10 +623,6 @@ Wolfgang Denk <wd@denx.de>
imx27lite i.MX27
qong i.MX31
-Thomas Elste <info@elste.org>
-
- modnet50 ARM720T (NET+50)
-
Fabio Estevam <fabio.estevam@freescale.com>
mx31pdk i.MX31
diff --git a/MAKEALL b/MAKEALL
index a54b46b..e8ca904 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -299,14 +299,6 @@ LIST_ppc=" \
LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
-## ARM7 Systems
-#########################################################################
-
-LIST_ARM7=" \
- modnet50 \
-"
-
-#########################################################################
## ARM9 Systems
#########################################################################
@@ -467,7 +459,6 @@ LIST_ixp="$(boards_by_cpu ixp)
LIST_arm=" \
${LIST_SA} \
- ${LIST_ARM7} \
${LIST_ARM9} \
${LIST_ARM10} \
${LIST_ARM11} \
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
deleted file mode 100644
index d5a541f..0000000
--- a/board/modnet50/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := modnet50.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/modnet50/config.mk b/board/modnet50/config.mk
deleted file mode 100644
index 4e4d305..0000000
--- a/board/modnet50/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x00f00000
-#CROSS_COMPILE = arm-elf-
diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c
deleted file mode 100644
index 4c31143..0000000
--- a/board/modnet50/flash.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * (C) Copyright 2002
- * MAZeT GmbH <www.mazet.de>
- * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- *
- * The most stuff comes from PPCBoot and Linux.
- *
- * IMMS gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * Modifications for ModNET50 Board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/netarm_registers.h>
-
-#define SCR (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
-
-#define ALIGN_ABORT_OFF SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
-#define ALIGN_ABORT_ON SCR = SCR | NETARM_GEN_SYS_CFG_ALIGN_ABORT
-
-#define PROG_ADDR (0x555*2)
-#define SETUP_ADDR (0x555*2)
-#define ID_ADDR (0x555*2)
-#define UNLOCK_ADDR1 (0x555*2)
-#define UNLOCK_ADDR2 (0x2AA*2)
-
-#define UNLOCK_CMD1 (0xAA)
-#define UNLOCK_CMD2 (0x55)
-#define ERASE_SUSPEND_CMD (0xB0)
-#define ERASE_RESUME_CMD (0x30)
-#define RESET_CMD (0xF0)
-#define ID_CMD (0x90)
-#define SECERASE_CMD (0x30)
-#define CHIPERASE_CMD (0x10)
-#define PROG_CMD (0xa0)
-#define SETUP_CMD (0x80)
-
-#define DQ2 (0x04)
-#define DQ3 (DQ2*2)
-#define DQ5 (DQ3*4)
-#define DQ6 (DQ5*2)
-
-#define WRITE_UNLOCK(addr) { \
- *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
- *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
-}
-
-#define CONFIG_AM29_RESERVED (0)
-#define K (1024)
-#define MB (4)
-
-#define CELL_SIZE (64*K)
-#define DEVICE_SIZE (MB*K*K)
-#define CELLS_PER_DEVICE (DEVICE_SIZE/CELL_SIZE)
-#define RESERVED_CELLS (CONFIG_AM29_RESERVED*K)/CELL_SIZE
-#define MAX_FLASH_DEVICES (1)
-#define AVAIL_SIZE (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-static __u16 toggling_bits;
-
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
- short i;
- __u16 flashtest;
-
- /* Write auto select command sequence and test FLASH answer */
- WRITE_UNLOCK (baseaddr);
- *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
- flashtest /* manufacturer ID */ = *(volatile __u16 *) (baseaddr);
- *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
-
- switch ((__u32) ((flashtest << 16) + flashtest)) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- /* Write auto select command sequence and test FLASH answer */
- WRITE_UNLOCK (baseaddr);
- *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
- flashtest /* device ID */ = *(volatile __u16 *) (baseaddr + 2);
- *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
-
- /* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
- toggling_bits = (DQ2 | DQ6);
-
- switch ((__u32) ((flashtest << 16) + flashtest)) {
- case AMD_ID_LV160B:
- info->flash_id +=
- (FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- info->size = CONFIG_SYS_FLASH_SIZE;
- /* 1*16K Boot Block
- 2*8K Parameter Block
- 1*32K Small Main Block */
- info->start[0] = baseaddr;
- info->start[1] = baseaddr + 0x4000;
- info->start[2] = baseaddr + 0x6000;
- info->start[3] = baseaddr + 0x8000;
- for (i = 1; i < info->sector_count; i++)
- info->start[3 + i] = baseaddr + i * CONFIG_SYS_MAIN_SECT_SIZE;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* no or unknown flash */
- }
-
- for (i = 0; i < info->sector_count; i++) {
- /* Write auto select command sequence and test FLASH answer */
- WRITE_UNLOCK (info->start[i]);
- *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
- flashtest /* protected verify */ = *(volatile __u16 *) (info->start[i] + 4);
- *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
- if (flashtest & 0x0001) {
- info->protect[i] = 1; /* D0 = 1 if protected */
- } else {
- info->protect[i] = 0;
- }
- }
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_init (void)
-{
- ulong size = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here (only one bank) */
- size = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size >> 20);
- }
-
- /*
- * protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf ("Fujitsu ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMDL323B:
- printf ("29DL323B (32 M, bottom sector)\n");
- break;
- case (FLASH_AM160LV | FLASH_AM160B):
- printf ("29LV160BE (1M x 16, bottom sector)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 4) == 0)
- printf ("\n ");
- printf (" S%02d @ 0x%08lX%s", i,
- info->start[i], info->protect[i] ? " !" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_check_protection (flash_info_t * info, int s_first, int s_last)
-{
- int sect, prot = 0;
-
- for (sect = s_first; sect <= s_last; sect++)
- if (info->protect[sect])
- prot++;
- if (prot)
- printf ("- can't erase %d protected sectors\n", prot);
- return prot;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_check_erase_amd (ulong start)
-{
- __u16 v1, v2;
-
- v1 = *(volatile __u16 *) (start);
- v2 = *(volatile __u16 *) (start);
-
- if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
- if (((v1 | v2) & DQ5) == DQ5) {
- printf ("[DQ5] ");
- /* OOPS: exceeded timing limits */
-
- v1 = *(volatile __u16 *) (start);
- v2 = *(volatile __u16 *) (start);
-
- if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
-
- printf ("[%s] ",
- ((toggling_bits & (DQ2 | DQ6)) ==
- (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
-
- /* OOPS: there is an erasure in progress,
- * try to reset chip */
- *(volatile __u16 *) (start) =
- (__u16) RESET_CMD;
-
- return 1; /* still busy */
- }
- }
- return 1; /* still busy */
- }
- return 0; /* be free */
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, sect, setup_offset = 0;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- return ERR_UNKNOWN_FLASH_TYPE;
- }
-
- if ((s_first < 0) || (s_first > s_last)) {
- printf ("- no sectors to erase\n");
- return ERR_INVAL;
- }
-
- if (flash_check_protection (info, s_first, s_last))
- return ERR_PROTECTED;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_FUJ:
- case FLASH_MAN_AMD:
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (FLASH_AM160LV | FLASH_AM160B):
- setup_offset = UNLOCK_ADDR1; /* just the adress for setup_cmd differs */
- case FLASH_AMDL323B:
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc ();
- sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- if (info->protect[sect] == 0) {
- /* not protected */
- /* Write sector erase command sequence */
- WRITE_UNLOCK (info->start[0]);
- *(volatile __u16 *) (info->start[0] +
- setup_offset) =
- (__u16) SETUP_CMD;
- WRITE_UNLOCK (info->start[0]);
- *(volatile __u16 *) (info->
- start[sect]) =
- (__u16) SECERASE_CMD;
-
- /* wait some time */
- reset_timer_masked ();
- while (get_timer_masked () < 1000) {
- }
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
- while (flash_check_erase_amd (info->start[sect])) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("timeout!\n");
- /* OOPS: reach timeout,
- * try to reset chip
- */
- *(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
- rc = ERR_TIMOUT;
- goto outahere_323B;
- }
- }
- printf ("ok.\n");
- } else {
- printf ("protected!\n");
- }
- }
- if (ctrlc ())
- printf ("User Interrupt!\n");
-outahere_323B:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
- if (flag)
- enable_interrupts ();
- return rc;
- default:
- printf ("- unknown chip type\n");
- return ERR_UNKNOWN_FLASH_TYPE;
- }
- break;
- default:
- printf ("- unknown vendor ");
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_check_write_amd (ulong dest)
-{
- __u16 v1, v2;
-
- v1 = *(volatile __u16 *) (dest);
- v2 = *(volatile __u16 *) (dest);
-
- /* DQ6 toggles during write */
- if (((v1 ^ v2) & DQ6) == DQ6) {
- if (((v1 | v2) & DQ5) == DQ5) {
- printf ("[DQ5] @ %08lX\n", dest);
-
- /* OOPS: exceeded timing limits,
- * try to reset chip */
- *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
- return 0; /* be free */
- }
- return 1; /* still busy */
- }
-
- return 0; /* be free */
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*(__u16 *) (dest) & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* Write program command sequence */
- WRITE_UNLOCK (info->start[0]);
-
- /* Flash dependend program seqence */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_FUJ:
- case FLASH_MAN_AMD:
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (FLASH_AM160LV | FLASH_AM160B):
- *(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
- (__u16) PROG_CMD;
- *(volatile __u16 *) (dest) = (__u16) data;
- break;
- case FLASH_AMDL323B:
- *(volatile __u16 *) (dest) = (__u16) PROG_CMD;
- *(volatile __u16 *) (dest) = (__u16) data;
- break;
- }
- }
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- while (flash_check_write_amd (dest)) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- printf ("timeout! @ %08lX\n", dest);
- /* OOPS: reach timeout,
- * try to reset chip */
- *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
-
- rc = ERR_TIMOUT;
- goto outahere_323B;
- }
- }
-
- /* Check if Flash was (accurately) written */
- if (*(__u16 *) (dest) != data)
- rc = ERR_PROG_ERROR;
-
-outahere_323B:
- if (flag)
- enable_interrupts ();
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((ushort *) src);
- if ((rc = write_word (info, wp, data)) != 0)
- return (rc);
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0)
- return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/modnet50/lowlevel_init.S b/board/modnet50/lowlevel_init.S
deleted file mode 100644
index 52ef2a8..0000000
--- a/board/modnet50/lowlevel_init.S
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Memory Setup stuff - taken from Linux
- *
- * Copyright (c) 2002 Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/netarm_registers.h>
-
-
-/* some parameters for the board */
-#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3)
-#define FLASH_70ns_WAIT_STATES 4
-
-#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1)
-#if 1
-#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1))
-#else
-#define NETARM_MMAP_CS0_MASK (~(1000000 - 1))
-#endif
-#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1)
-#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1))
-#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2)
-#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1))
-#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
-#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1)
-#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1))
-#endif
-#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1)
-#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1))
-
-/* setting up the memory */
-.globl lowlevel_init
-lowlevel_init:
-
-#if defined(CONFIG_MODNET50)
- ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - CONFIG_SYS_TEXT_BASE)
-
-_jump_to_high:
- /*
- * MEM Config Reg
- * ---------------------------------------------------
- */
- ldr r0, =NETARM_MEM_MODULE_BASE
- ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \
- NETARM_MEM_CFG_REFRESH_EN | \
- NETARM_MEM_CFG_REFR_CYCLE_5CLKS )
- str r1, [r0, #+NETARM_MEM_MODULE_CONFIG]
-
-
-memsetup_cs0:
- /*
- * Base Addr / Option Reg 0 (Flash)
- * ---------------------------------------------------
- */
- ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \
- NETARM_MEM_BAR_DRAM_FP | \
- NETARM_MEM_BAR_DRAM_MUX_INT | \
- NETARM_MEM_BAR_DRAM_MUX_BAL | \
- NETARM_MEM_BAR_VALID )
- str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR]
-
- /* trust that the bus size for flash was strapped correctly */
- /* this saves the bus width in r2 and then ORs it back in */
- /* it's pretty safe assumption, otherwise it wouldn't boot */
- ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS]
- and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK
-
-/* just a test: assume 32 bit flash mem */
-/* mov r2, #NETARM_MEM_OPT_32BIT */
-
- ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \
- NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \
- NETARM_MEM_OPT_BCYC_4 | \
- NETARM_MEM_OPT_BSIZE_16 | \
- NETARM_MEM_OPT_16BIT | \
- NETARM_MEM_OPT_READ_ASYNC | \
- NETARM_MEM_OPT_WRITE_ASYNC )
-
- orr r1, r1, r2
- str r1, [r0, #+NETARM_MEM_CS0_OPTIONS]
-
-
-memsetup_cs1:
- /*
- * Base Addr / Option Reg 1 (DRAM #1)
- * ---------------------------------------------------
- */
-#ifdef CONFIG_NETARM_NET40_REV2
- /* we have to config SDRAM in burst mode */
- ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
- NETARM_MEM_OPT_BCYC_2 | \
- NETARM_MEM_OPT_BSIZE_16 | \
- NETARM_MEM_OPT_WAIT_STATES(0) | \
- NETARM_MEM_OPT_32BIT | \
- NETARM_MEM_OPT_READ_ASYNC | \
- NETARM_MEM_OPT_WRITE_ASYNC )
- str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
-
- ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
- NETARM_MEM_BAR_DRAM_SYNC | \
- NETARM_MEM_BAR_DRAM_MUX_INT | \
- NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
- NETARM_MEM_BAR_DRAM_SEL | \
- NETARM_MEM_BAR_BURST_EN | \
- NETARM_MEM_BAR_VALID )
- str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
-#else
- /* we have to config FPDRAM in burst mode with smaller burst access size */
- ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
- NETARM_MEM_OPT_BCYC_2 | \
- NETARM_MEM_OPT_BSIZE_16 | \
- NETARM_MEM_OPT_WAIT_STATES(0) | \
- NETARM_MEM_OPT_32BIT | \
- NETARM_MEM_OPT_READ_ASYNC | \
- NETARM_MEM_OPT_WRITE_ASYNC )
- str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
-
- ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
- NETARM_MEM_BAR_DRAM_SYNC | \
- NETARM_MEM_BAR_DRAM_MUX_INT | \
- NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
- NETARM_MEM_BAR_DRAM_SEL | \
- NETARM_MEM_BAR_BURST_EN | \
- NETARM_MEM_BAR_VALID )
- str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
-
-#endif /* CONFIG_NETARM_NET40_REV2 */
-
-
-memsetup_cs3:
- /*
- * Base Addr / Option Reg 3 (EEPROM, NVRAM)
- * ---------------------------------------------------
- */
-#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
- ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \
- NETARM_MEM_OPT_BCYC_3 | \
- NETARM_MEM_OPT_BSIZE_2 | \
- NETARM_MEM_OPT_WAIT_STATES(10) | \
- NETARM_MEM_OPT_8BIT | \
- NETARM_MEM_OPT_READ_ASYNC | \
- NETARM_MEM_OPT_WRITE_ASYNC )
- str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
-
- ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \
- NETARM_MEM_BAR_DRAM_FP | \
- NETARM_MEM_BAR_DRAM_MUX_INT | \
- NETARM_MEM_BAR_DRAM_MUX_BAL | \
- NETARM_MEM_BAR_VALID )
- str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
-#else
- /* we don't need EEPROM --> no config */
- ldr r1, =( 0 )
- str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
-
- ldr r1, =( 0 )
- str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
-#endif
-
-
-#else
-/*
-#error "missing CONFIG_MODNET50 (see your config.h)"
-*/
-#endif /* CONFIG_MODNET50 */
-
-
-lowlevel_init_end:
- /*
- * manipulate address in lr and ip to match new
- * address space
- */
- ldr r3, =(NETARM_MMAP_CS0_BASE)
- mov r0, lr
- add r0, r3, r0
- mov lr, r0
- mov r0, ip
- add r0, r3, r0
- mov ip, r0
-
- /* everything is fine now */
- mov pc, lr
diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c
deleted file mode 100644
index 4544069..0000000
--- a/board/modnet50/modnet50.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* address for the kernel command line */
- gd->bd->bi_boot_params = 0x800;
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- if (CONFIG_NR_DRAM_BANKS == 2) {
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- }
- return (0);
-}
diff --git a/boards.cfg b/boards.cfg
index 6140a72..f47e9ae 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -41,7 +41,6 @@ imx31_litekit arm arm1136 - logicpd
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-modnet50 arm arm720t
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 0020ff4..5214e30 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+modnet50 arm arm720t - 2011-07-16 Thomas Elste <info@elste.org>
lpc2292sodimm arm arm720t - 2011-07-16
SMN42 arm arm720t - 2011-07-16
impa7 arm arm720t - 2011-07-16 Marius Gr?ger <mag@sysgo.de>
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
deleted file mode 100644
index 57707f3..0000000
--- a/include/configs/modnet50.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2004
- * IMMS, gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * Configuation settings for ModNET50 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */
-#undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */
-#undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */
-#define CONFIG_NETARM_NET50 /* it's a Net+50 */
-
-#define CONFIG_MODNET50 1 /* on an ModNET50 Board */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_NETARMETH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_NETARM_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.30.2
-#define CONFIG_SERVERIP 192.168.30.122
-#define CONFIG_SYS_ETH_PHY_ADDR 0x100
-#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */
-
-/*#define CONFIG_BOOTDELAY 10*/
-/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
-#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
-#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \
- "root=/dev/ram keepinitrd"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */
-
-#define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-#define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */
-
-#define PHYS_FLASH_2 0x10200001
-#define PHYS_FLASH_2_SIZE 0x00200000
-
-#define CONFIG_NETARM_EEPROM
-/* #ifdef CONFIG_NETARM_EEPROM */
-#define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */
-#define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */
-/* #endif */
-
-#define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */
-#define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR 0x1001C000 /* environment start address */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* max size for environment */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00080000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=modnet50-0"
-#define MTDPARTS_DEFAULT "mtdparts=modnet50-0:- at 512k(jffs2)"
-*/
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 18/52] ARM: remove broken "ap920t" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (16 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 17/52] ARM: remove broken "modnet50" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 19/52] ARM: remove broken "ap922_XA10" board Wolfgang Denk
` (35 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index e8ca904..3303b63 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -304,7 +304,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
- ap920t \
ap922_XA10 \
ap926ejs \
ap946es \
diff --git a/Makefile b/Makefile
index 89b3832..efd84d8 100644
--- a/Makefile
+++ b/Makefile
@@ -898,7 +898,6 @@ ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
-ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5214e30..db0bfd2 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap920t arm ? - 2011-07-16
modnet50 arm arm720t - 2011-07-16 Thomas Elste <info@elste.org>
lpc2292sodimm arm arm720t - 2011-07-16
SMN42 arm arm720t - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 19/52] ARM: remove broken "ap922_XA10" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (17 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 18/52] ARM: remove broken "ap920t" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 20/52] ARM: remove broken "ap926ejs" board Wolfgang Denk
` (34 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 3303b63..bd20fb5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -304,7 +304,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
- ap922_XA10 \
ap926ejs \
ap946es \
ap966 \
diff --git a/Makefile b/Makefile
index efd84d8..520ca23 100644
--- a/Makefile
+++ b/Makefile
@@ -897,7 +897,6 @@ TNY_A9260_config : unconfig
ap_config \
ap966_config \
ap922_config \
-ap922_XA10_config \
ap926ejs_config \
ap946es_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index db0bfd2..5b40d0e 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap922_XA10 arm ? - 2011-07-16
ap920t arm ? - 2011-07-16
modnet50 arm arm720t - 2011-07-16 Thomas Elste <info@elste.org>
lpc2292sodimm arm arm720t - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 20/52] ARM: remove broken "ap926ejs" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (18 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 19/52] ARM: remove broken "ap922_XA10" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 21/52] ARM: remove broken "ap946es" board Wolfgang Denk
` (33 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index bd20fb5..3ee1422 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -304,7 +304,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
- ap926ejs \
ap946es \
ap966 \
aspenite \
diff --git a/Makefile b/Makefile
index 520ca23..76d2abf 100644
--- a/Makefile
+++ b/Makefile
@@ -897,7 +897,6 @@ TNY_A9260_config : unconfig
ap_config \
ap966_config \
ap922_config \
-ap926ejs_config \
ap946es_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5b40d0e..e300a41 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap926ejs arm ? - 2011-07-16
ap922_XA10 arm ? - 2011-07-16
ap920t arm ? - 2011-07-16
modnet50 arm arm720t - 2011-07-16 Thomas Elste <info@elste.org>
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 21/52] ARM: remove broken "ap946es" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (19 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 20/52] ARM: remove broken "ap926ejs" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 22/52] ARM: remove broken "ap966" board Wolfgang Denk
` (32 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 3 +--
doc/README.scrapyard | 1 +
3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 3ee1422..20aa157 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -304,7 +304,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
- ap946es \
ap966 \
aspenite \
cp920t \
diff --git a/Makefile b/Makefile
index 76d2abf..d268d1d 100644
--- a/Makefile
+++ b/Makefile
@@ -896,8 +896,7 @@ TNY_A9260_config : unconfig
## ARM Integrator boards - see doc/README-integrator for more info.
ap_config \
ap966_config \
-ap922_config \
-ap946es_config: unconfig
+ap922_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
integratorcp_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e300a41..e3bb81c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap946es arm ? - 2011-07-16
ap926ejs arm ? - 2011-07-16
ap922_XA10 arm ? - 2011-07-16
ap920t arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 22/52] ARM: remove broken "ap966" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (20 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 21/52] ARM: remove broken "ap946es" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 23/52] ARM: remove broken "cp920t" board Wolfgang Denk
` (31 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 20aa157..afeac08 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -304,7 +304,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
- ap966 \
aspenite \
cp920t \
cp922_XA10 \
diff --git a/Makefile b/Makefile
index d268d1d..5c7d035 100644
--- a/Makefile
+++ b/Makefile
@@ -895,7 +895,6 @@ TNY_A9260_config : unconfig
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
ap_config \
-ap966_config \
ap922_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e3bb81c..c4becff 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ap966 arm ? - 2011-07-16
ap946es arm ? - 2011-07-16
ap926ejs arm ? - 2011-07-16
ap922_XA10 arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 23/52] ARM: remove broken "cp920t" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (21 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 22/52] ARM: remove broken "ap966" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 24/52] ARM: remove broken "cp922_XA10" board Wolfgang Denk
` (30 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index afeac08..a63ca4f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
aspenite \
- cp920t \
cp922_XA10 \
cp926ejs \
cp946es \
diff --git a/Makefile b/Makefile
index 5c7d035..031b441 100644
--- a/Makefile
+++ b/Makefile
@@ -900,7 +900,6 @@ ap922_config: unconfig
integratorcp_config \
cp_config \
-cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index c4becff..acf1a7b 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cp920t arm ? - 2011-07-16
ap966 arm ? - 2011-07-16
ap946es arm ? - 2011-07-16
ap926ejs arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 24/52] ARM: remove broken "cp922_XA10" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (22 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 23/52] ARM: remove broken "cp920t" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 25/52] ARM: remove broken "cp926ejs" board Wolfgang Denk
` (29 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index a63ca4f..bd1255d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
aspenite \
- cp922_XA10 \
cp926ejs \
cp946es \
cp966 \
diff --git a/Makefile b/Makefile
index 031b441..ffd50a0 100644
--- a/Makefile
+++ b/Makefile
@@ -905,7 +905,6 @@ cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
-cp922_XA10_config \
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index acf1a7b..41b1afc 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cp922_XA10 arm ? - 2011-07-16
cp920t arm ? - 2011-07-16
ap966 arm ? - 2011-07-16
ap946es arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 25/52] ARM: remove broken "cp926ejs" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (23 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 24/52] ARM: remove broken "cp922_XA10" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 26/52] ARM: remove broken "cp946es" board Wolfgang Denk
` (28 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index bd1255d..225dc59 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
aspenite \
- cp926ejs \
cp946es \
cp966 \
da830evm \
diff --git a/Makefile b/Makefile
index ffd50a0..2892117 100644
--- a/Makefile
+++ b/Makefile
@@ -900,7 +900,6 @@ ap922_config: unconfig
integratorcp_config \
cp_config \
-cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 41b1afc..280cf40 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cp926ejs arm ? - 2011-07-16
cp922_XA10 arm ? - 2011-07-16
cp920t arm ? - 2011-07-16
ap966 arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 26/52] ARM: remove broken "cp946es" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (24 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 25/52] ARM: remove broken "cp926ejs" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 27/52] ARM: remove broken "cp966" board Wolfgang Denk
` (27 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 225dc59..233568f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
aspenite \
- cp946es \
cp966 \
da830evm \
da850evm \
diff --git a/Makefile b/Makefile
index 2892117..c49a336 100644
--- a/Makefile
+++ b/Makefile
@@ -900,7 +900,6 @@ ap922_config: unconfig
integratorcp_config \
cp_config \
-cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 280cf40..5551b2e 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cp946es arm ? - 2011-07-16
cp926ejs arm ? - 2011-07-16
cp922_XA10 arm ? - 2011-07-16
cp920t arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 27/52] ARM: remove broken "cp966" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (25 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 26/52] ARM: remove broken "cp946es" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 28/52] ARM: remove broken "edb93xx" boards Wolfgang Denk
` (26 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
doc/README.scrapyard | 1 +
3 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 233568f..a72f3c6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -305,7 +305,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9=" \
a320evb \
aspenite \
- cp966 \
da830evm \
da850evm \
edb9301 \
diff --git a/Makefile b/Makefile
index c49a336..df93567 100644
--- a/Makefile
+++ b/Makefile
@@ -901,7 +901,6 @@ ap922_config: unconfig
integratorcp_config \
cp_config \
cp1136_config \
-cp966_config \
cp922_config \
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5551b2e..9cd826c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cp966 arm ? - 2011-07-16
cp946es arm ? - 2011-07-16
cp926ejs arm ? - 2011-07-16
cp922_XA10 arm ? - 2011-07-16
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 28/52] ARM: remove broken "edb93xx" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (26 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 27/52] ARM: remove broken "cp966" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 29/52] ARM: remove broken "lpd7a40x" boards Wolfgang Denk
` (25 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312,
edb9315 and edb9315a boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 8 --
Makefile | 10 --
board/edb93xx/Makefile | 50 --------
board/edb93xx/config.mk | 33 -----
board/edb93xx/early_udelay.h | 34 ------
board/edb93xx/edb93xx.c | 110 -----------------
board/edb93xx/flash_cfg.c | 38 ------
board/edb93xx/pll_cfg.c | 58 ---------
board/edb93xx/pll_cfg.h | 72 -----------
board/edb93xx/sdram_cfg.c | 146 -----------------------
board/edb93xx/sdram_cfg.h | 144 ----------------------
doc/README.scrapyard | 8 ++
include/configs/edb93xx.h | 269 ------------------------------------------
13 files changed, 8 insertions(+), 972 deletions(-)
delete mode 100644 board/edb93xx/Makefile
delete mode 100644 board/edb93xx/config.mk
delete mode 100644 board/edb93xx/early_udelay.h
delete mode 100644 board/edb93xx/edb93xx.c
delete mode 100644 board/edb93xx/flash_cfg.c
delete mode 100644 board/edb93xx/pll_cfg.c
delete mode 100644 board/edb93xx/pll_cfg.h
delete mode 100644 board/edb93xx/sdram_cfg.c
delete mode 100644 board/edb93xx/sdram_cfg.h
delete mode 100644 include/configs/edb93xx.h
diff --git a/MAKEALL b/MAKEALL
index a72f3c6..38ffe50 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -307,14 +307,6 @@ LIST_ARM9=" \
aspenite \
da830evm \
da850evm \
- edb9301 \
- edb9302 \
- edb9302a \
- edb9307 \
- edb9307a \
- edb9312 \
- edb9315 \
- edb9315a \
edminiv2 \
guruplug \
imx27lite \
diff --git a/Makefile b/Makefile
index df93567..01bd96a 100644
--- a/Makefile
+++ b/Makefile
@@ -958,16 +958,6 @@ tx25_config : unconfig
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
-
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile
deleted file mode 100644
index dcaed06..0000000
--- a/board/edb93xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk
deleted file mode 100644
index fab59ef..0000000
--- a/board/edb93xx/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
-
-ifdef CONFIG_EDB9301
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302A
-CONFIG_SYS_TEXT_BASE = 0xc5700000
-endif
-
-ifdef CONFIG_EDB9307
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9307A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
-
-ifdef CONFIG_EDB9312
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
diff --git a/board/edb93xx/early_udelay.h b/board/edb93xx/early_udelay.h
deleted file mode 100644
index 185283d..0000000
--- a/board/edb93xx/early_udelay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/* delay execution before timers are initialized */
-static inline void early_udelay(uint32_t usecs)
-{
- /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */
- register uint32_t loops = usecs * (1000 / 20);
-
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c
deleted file mode 100644
index dde30ff..0000000
--- a/board/edb93xx/edb93xx.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * (C) Copyright 2002 2003
- * Network Audio Technologies, Inc. <www.netaudiotech.com>
- * Adam Bezanson <bezanson@netaudiotech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MAX_BANK_SIZE 0x04000000 /* 64 MB */
-
-static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
- PHYS_SDRAM_1,
-#ifdef PHYS_SDRAM_2
- PHYS_SDRAM_2,
-#endif
-#ifdef PHYS_SDRAM_3
- PHYS_SDRAM_3,
-#endif
-#ifdef PHYS_SDRAM_4
- PHYS_SDRAM_4
-#endif
-};
-
-int board_init(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- icache_enable();
-
-#ifdef USE_920T_MMU
- dcache_enable();
-#endif
-
- /*
- * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
- * 14.7456/2 MHz
- */
- uint32_t value = readl(&syscon->pwrcnt);
- value |= SYSCON_PWRCNT_UART_BAUD;
- writel(value, &syscon->pwrcnt);
-
- /* Enable the uart in devicecfg */
- value = readl(&syscon->devicecfg);
- value |= 1<<18 /* U1EN */;
- writel(0xAA, &syscon->sysswlock);
- writel(value, &syscon->devicecfg);
-
- /* Machine number, as defined in linux/arch/arm/tools/mach-types */
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* We have a console */
- gd->have_console = 1;
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ep93xx_eth_initialize(0, MAC_BASE);
-}
-
-int dram_init(void)
-{
- unsigned int *src, *dst;
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- const ulong bank_size = get_ram_size((long *)bank_addr[i],
- MAX_BANK_SIZE);
- if (bank_size) {
- gd->bd->bi_dram[i].start = bank_addr[i];
- gd->bd->bi_dram[i].size = bank_size;
- }
- }
-
- /* copy exception vectors */
- src = (unsigned int *)_armboot_start;
- dst = (unsigned int *)PHYS_SDRAM_1;
- memcpy(dst, src, 16 * sizeof(unsigned int));
-
- return 0;
-}
diff --git a/board/edb93xx/flash_cfg.c b/board/edb93xx/flash_cfg.c
deleted file mode 100644
index a4c2048..0000000
--- a/board/edb93xx/flash_cfg.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Flash setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \
- SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \
- 1 << SMC_BCR_MW_SHIFT)
-
-void flash_cfg(void)
-{
- struct smc_regs *smc = (struct smc_regs *)SMC_BASE;
-
- writel(SMC_BCR6_VALUE, &smc->bcr6);
-}
diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c
deleted file mode 100644
index a687af0..0000000
--- a/board/edb93xx/pll_cfg.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PLL setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include "pll_cfg.h"
-#include "early_udelay.h"
-
-void pll_cfg(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- /* setup PLL1 */
- writel(CLKSET1_VAL, &syscon->clkset1);
-
- /*
- * flush the pipeline
- * writing to CLKSET1 causes the EP93xx to enter standby for between
- * 8 ms to 16 ms, until PLL1 stabilizes
- */
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
-
- /* setup PLL2 */
- writel(CLKSET2_VAL, &syscon->clkset2);
-
- /*
- * the user's guide recommends to wait at least 1 ms for PLL2 to
- * stabilize
- */
- early_udelay(1000);
-}
diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h
deleted file mode 100644
index 0b6f469..0000000
--- a/board/edb93xx/pll_cfg.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * PLL register values for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2
- * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000,
- * pll1_x2: 331776000.000000, pll1_out: 331776000.000000
- */
-#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2
- * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000,
- * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000
- */
-#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#else
-#error "Undefined board"
-#endif
-
-/*
- * usb_div: 4, nbyp2: 1, pll2_en: 1
- * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000,
- * pll2_x2: 384000000.000000, pll2_out: 192000000.000000
- */
-#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \
- SYSCON_CLKSET2_PLL2_EN | \
- SYSCON_CLKSET2_NBYP2 | \
- 3 << SYSCON_CLKSET2_USB_DIV_SHIFT)
diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c
deleted file mode 100644
index 440ad11..0000000
--- a/board/edb93xx/sdram_cfg.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/io.h>
-#include "sdram_cfg.h"
-#include "early_udelay.h"
-
-#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
-
-#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0
-
-static void precharge_all_banks(void);
-static void setup_refresh_timer(void);
-static void program_mode_registers(void);
-
-void sdram_cfg(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
-
- /* Issue continous NOP commands */
- writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- early_udelay(200);
-
- precharge_all_banks();
-
- setup_refresh_timer();
-
- program_mode_registers();
-
- /* Select normal operation mode */
- writel(GLCONFIG_CKE, &sdram->glconfig);
-}
-
-static void precharge_all_banks(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Issue PRECHARGE ALL commands */
- writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always
- * issued
- *
- * Cirrus proposes a workaround which consists in performing a read from
- * each bank to force the precharge. This causes some boards to hang.
- * Writing to the SDRAM banks instead of reading has the same
- * side-effect (the SDRAM controller issues the necessary precharges),
- * but is known to work on all supported boards
- */
-
- PRECHARGE_BANK(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PRECHARGE_BANK(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PRECHARGE_BANK(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PRECHARGE_BANK(3);
-#endif
-}
-
-static void setup_refresh_timer(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Load refresh timer with 10 to issue refresh every 10 cycles */
- writel(0x0a, &sdram->refrshtimr);
-
- /*
- * Wait at least 80 clock cycles to provide 8 refresh cycles
- * to all SDRAMs
- */
- early_udelay(1);
-
- /*
- * Program refresh timer with normal value
- * We need 8192 refresh cycles every 64ms
- * at 15ns (HCLK >= 66MHz) per cycle:
- * 64ms / 8192 = 7.8125us
- * 7.8125us / 15ns = 520 (0x208)
- */
- /*
- * TODO: redboot uses 0x1e0 for the slowest possible device
- * but i don't understand how this value is calculated
- */
- writel(0x208, &sdram->refrshtimr);
-}
-
-static void program_mode_registers(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Select mode register update mode */
- writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * The mode registers are programmed by performing a read from each
- * SDRAM bank. The value of the address that is read defines the value
- * that is written into the mode register
- */
-
- PROGRAM_MODE_REG(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PROGRAM_MODE_REG(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PROGRAM_MODE_REG(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PROGRAM_MODE_REG(3);
-#endif
-}
diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h
deleted file mode 100644
index 757b63c..0000000
--- a/board/edb93xx/sdram_cfg.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#define SDRAM_BASE_ADDR PHYS_SDRAM_1
-
-#ifdef CONFIG_EDB93XX_SDCS0
-#define SDRAM_DEVCFG_REG devcfg0
-#elif defined(CONFIG_EDB93XX_SDCS3)
-#define SDRAM_DEVCFG_REG devcfg3
-#else
-#error "SDRAM bank configuration"
-#endif
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 15ns cycle time, we use RAS-to-CAS delay = 2
- *
- * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
- * as four blocks of 8MB size, instead of eight blocks of 4MB size:
- *
- * EDB9301/EDB9302:
- *
- * 0x00000000 - 0x007fffff
- * 0x01000000 - 0x017fffff
- * 0x04000000 - 0x047fffff
- * 0x05000000 - 0x057fffff
- *
- *
- * EDB9302a:
- *
- * 0xc0000000 - 0xc07fffff
- * 0xc1000000 - 0xc17fffff
- * 0xc4000000 - 0xc47fffff
- * 0xc5000000 - 0xc57fffff
- *
- * BANKCOUNT = 1: This is a device with four banks
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2 | \
- SDRAM_DEVCFG_EXTBUSWIDTH)
-
-/*
- * 16 bit ext. bus
- *
- * A[22:09] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 8 (required for 16 bit ext. bus)
- * SYA[13:0] = 0x0023
- */
-#define SDRAM_MODE_REG_VAL 0x4600
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */
-#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */
-#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */
-#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */
-
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 10ns cycle time, we use RAS-to-CAS delay = 2
- *
- * EDB9307, EDB9312, EDB9315:
- *
- * 0x00000000 - 0x01ffffff
- * 0x04000000 - 0x05ffffff
- *
- *
- * EDB9307a, EDB9315a:
- *
- * 0xc0000000 - 0xc1ffffff
- * 0xc4000000 - 0xc5ffffff
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2)
-
-/*
- * 32 bit ext. bus
- *
- * A[23:10] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 4
- * SYA[13:0] = 0x0022
- */
-#define SDRAM_MODE_REG_VAL 0x8800
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */
-#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */
-#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */
-#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */
-#endif
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 9cd826c..0dd2740 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,14 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+edb9301 arm arm920t - 2011-07-17
+edb9302 arm arm920t - 2011-07-17
+edb9302a arm arm920t - 2011-07-17
+edb9307 arm arm920t - 2011-07-17
+edb9307a arm arm920t - 2011-07-17
+edb9312 arm arm920t - 2011-07-17
+edb9315 arm arm920t - 2011-07-17
+edb9315a arm arm920t - 2011-07-17
cp966 arm ? - 2011-07-16
cp946es arm ? - 2011-07-16
cp926ejs arm ? - 2011-07-16
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
deleted file mode 100644
index 19b7632..0000000
--- a/include/configs/edb93xx.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * U-boot - Configuration file for Cirrus Logic EDB93xx boards
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_edb9301
-#define CONFIG_EDB9301
-#elif defined(CONFIG_edb9302)
-#define CONFIG_EDB9302
-#elif defined(CONFIG_edb9302a)
-#define CONFIG_EDB9302A
-#elif defined(CONFIG_edb9307)
-#define CONFIG_EDB9307
-#elif defined(CONFIG_edb9307a)
-#define CONFIG_EDB9307A
-#elif defined(CONFIG_edb9312)
-#define CONFIG_EDB9312
-#elif defined(CONFIG_edb9315)
-#define CONFIG_EDB9315
-#elif defined(CONFIG_edb9315a)
-#define CONFIG_EDB9315A
-#else
-#error "no board defined"
-#endif
-
-/* Initial environment and monitor configuration options. */
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
-#define CONFIG_BOOTFILE "edb93xx.img"
-
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#ifdef CONFIG_EDB9301
-#define CONFIG_EP9301
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
-#define CONFIG_SYS_PROMPT "EDB9301> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
-#define CONFIG_SYS_PROMPT "EDB9302> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302A)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
-#define CONFIG_SYS_PROMPT "EDB9302A> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9307)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
-#define CONFIG_SYS_PROMPT "EDB9307> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9307A)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
-#define CONFIG_SYS_PROMPT "EDB9307A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9312)
-#define CONFIG_EP9312
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
-#define CONFIG_SYS_PROMPT "EDB9312> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
-#define CONFIG_SYS_PROMPT "EDB9315> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315A)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
-#define CONFIG_SYS_PROMPT "EDB9315A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#else
-#error "no board defined"
-#endif
-
-/* High-level configuration options */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
-#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
-
-#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
-#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */
-#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
-
-/* Monitor configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#undef CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-/* Print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* Boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-
-/* Serial port hardware configuration */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-#define CONFIG_SYS_SERIAL0 0x808C0000
-#define CONFIG_SYS_SERIAL1 0x808D0000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1}
-
-/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_GREEN 0
-#define STATUS_LED_RED 1
-/* Green */
-#define STATUS_LED_BIT STATUS_LED_GREEN
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1 STATUS_LED_RED
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT STATUS_LED_BIT
-
-/* Network hardware configuration */
-#define CONFIG_DRIVER_EP93XX_MAC
-#define CONFIG_MII_SUPPRESS_PREAMBLE
-#define CONFIG_MII
-#define CONFIG_PHY_ADDR 1
-#define CONFIG_NET_MULTI
-#undef CONFIG_NETCONSOLE
-
-/* SDRAM configuration */
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
-/*
- * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0x01000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0x04000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0x05000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x007fffff
-
-#elif defined(CONFIG_EDB9302A)
-/*
- * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0xc1000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0xc4000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0xc5000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc07fffff
-
-#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
- defined(CONFIG_EDB9315)
-/*
- * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
- * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
- * 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0x04000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x01e00000
-
-#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
-/*
- * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
- * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0xc4000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc1e00000
-#endif
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000)
-
-/* Must match kernel config */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-
-/* Run-time memory allocatons */
-#define CONFIG_STACKSIZE (128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ (4 * 1024)
-#define CONFIG_STACKSIZE_FIQ (4 * 1024)
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-
-/* -----------------------------------------------------------------------------
- * FLASH and environment organization
- *
- * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
- * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
- * for a total of 16 MB of CFI-compatible flash.
- *
- * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
- * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
- * data bus, for a total of 32 MB of CFI-compatible flash.
- *
- * EDB9301/02(a) EDB9307(a)/12/15(a)
- * 0x60000000 - 0x0003FFFF u-boot u-boot
- * 0x60040000 - 0x0005FFFF environment #1 environment #1
- * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
- * 0x60080000 - 0x0009FFFF unused environment #2
- * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
- * 0x600C0000 - 0x00FFFFFF unused unused
- * 0x61000000 - 0x01FFFFFF not present unused
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-#define PHYS_FLASH_1 0x60000000
-#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x60040000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#endif /* !defined (__CONFIG_H) */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 29/52] ARM: remove broken "lpd7a40x" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (27 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 28/52] ARM: remove broken "edb93xx" boards Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:16 ` [U-Boot] [PATCH 30/52] ARM: remove broken "mx1fs2" board Wolfgang Denk
` (24 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Remove lpd7a400 and lpd7a404 boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/lpd7a40x/Makefile | 51 -----
board/lpd7a40x/config.mk | 38 ---
board/lpd7a40x/flash.c | 488 ----------------------------------------
board/lpd7a40x/lowlevel_init.S | 212 -----------------
board/lpd7a40x/lpd7a40x.c | 93 --------
boards.cfg | 2 -
doc/README.scrapyard | 1 +
include/configs/lpd7a400-10.h | 80 -------
include/configs/lpd7a400.h | 117 ----------
include/configs/lpd7a404-10.h | 80 -------
include/configs/lpd7a404.h | 117 ----------
12 files changed, 1 insertions(+), 1279 deletions(-)
delete mode 100644 board/lpd7a40x/Makefile
delete mode 100644 board/lpd7a40x/config.mk
delete mode 100644 board/lpd7a40x/flash.c
delete mode 100644 board/lpd7a40x/lowlevel_init.S
delete mode 100644 board/lpd7a40x/lpd7a40x.c
delete mode 100644 include/configs/lpd7a400-10.h
delete mode 100644 include/configs/lpd7a400.h
delete mode 100644 include/configs/lpd7a404-10.h
delete mode 100644 include/configs/lpd7a404.h
diff --git a/MAKEALL b/MAKEALL
index 38ffe50..5873636 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -312,7 +312,6 @@ LIST_ARM9=" \
imx27lite \
jadecpu \
km_kirkwood \
- lpd7a400 \
magnesium \
mv88f6281gtw_ge \
mx1ads \
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
deleted file mode 100644
index 3aeb2fb..0000000
--- a/board/lpd7a40x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := lpd7a40x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
deleted file mode 100644
index 003e707..0000000
--- a/board/lpd7a40x/config.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
-# w/Sharp LH7A400 SoC (ARM920T) cpu
-#
-
-#
-# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
-#
-# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
-# params @ 0xc0000100
-# optionally with a ramdisk at 0xc0300000
-#
-# we load ourself to 0xc1fc0000 (32M - 256K)
-#
-# download area is 0xc0f00000
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1fc0000
-#CONFIG_SYS_TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
deleted file mode 100644
index a3ba75b..0000000
--- a/board/lpd7a40x/flash.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */
-#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S
deleted file mode 100644
index de34fc6..0000000
--- a/board/lpd7a40x/lowlevel_init.S
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Memory Setup - initialize memory controller(s) for devices required
- * to boot and relocate
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* memory controller */
-#define BCRX_DEFAULT (0x0000fbe0)
-#define BCRX_MW_8 (0x00000000)
-#define BCRX_MW_16 (0x10000000)
-#define BCRX_MW_32 (0x20000000)
-#define BCRX_PME (0x08000000)
-#define BCRX_WP (0x04000000)
-#define BCRX_WST2_SHIFT (11)
-#define BCRX_WST1_SHIFT (5)
-#define BCRX_IDCY_SHIFT (0)
-
-/* Bank0 Async Flash */
-#define BCR0 (0x80002000)
-#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
-
-/* Bank1 Open */
-#define BCR1 (0x80002004)
-
-/* Bank2 Not used (EEPROM?) */
-#define BCR2 (0x80002008)
-
-/* Bank3 Not used */
-#define BCR3 (0x8000200C)
-
-/* Bank4 PC Card1 */
-
-/* Bank5 PC Card2 */
-
-/* Bank6 CPLD IO Controller Peripherals (slow) */
-#define BCR6 (0x80002018)
-#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16)
-
-/* Bank7 CPLD IO Controller Peripherals (fast) */
-#define BCR7 (0x8000201C)
-#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
-
-/* SDRAM */
-#define GBLCNFG (0x80002404)
-#define GC_CKE (0x80000000)
-#define GC_CKSD (0x40000000)
-#define GC_LCR (0x00000040)
-#define GC_SMEMBURST (0x00000020)
-#define GC_MRS (0x00000002)
-#define GC_INIT (0x00000001)
-
-#define GC_CMD_NORMAL (GC_CKE)
-#define GC_CMD_MODE (GC_CKE | GC_MRS)
-#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR)
-#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT)
-#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS)
-
-#define RFSHTMR (0x80002408)
-#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
-#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
-
-#define SDCSCX_BASE (0x80002410)
-#define SDCSCX_DEFAULT (0x01220008)
-#define SDCSCX_AUTOPC (0x01000000)
-#define SDCSCX_RAS2CAS_2 (0x00200000)
-#define SDCSCX_RAS2CAS_3 (0x00300000)
-#define SDCSCX_WBL (0x00080000)
-#define SDCSCX_CASLAT_8 (0x00070000)
-#define SDCSCX_CASLAT_7 (0x00060000)
-#define SDCSCX_CASLAT_6 (0x00050000)
-#define SDCSCX_CASLAT_5 (0x00040000)
-#define SDCSCX_CASLAT_4 (0x00030000)
-#define SDCSCX_CASLAT_3 (0x00020000)
-#define SDCSCX_CASLAT_2 (0x00010000)
-#define SDCSCX_2KPAGE (0x00000040)
-#define SDCSCX_SROMLL (0x00000020)
-#define SDCSCX_SROM512 (0x00000010)
-#define SDCSCX_4BNK (0x00000008)
-#define SDCSCX_2BNK (0x00000000)
-#define SDCSCX_EBW_16 (0x00000004)
-#define SDCSCX_EBW_32 (0x00000000)
-
-#define SDRAM_BASE (0xC0000000)
-#define SDCSC_BANK_OFFSET (0x10000000)
-
-/*
- * The SDRAM DEVICE MODE PROGRAMMING VALUE
- */
-#define BURST_LENGTH_4 (2 << 10)
-#define BURST_LENGTH_8 (3 << 10)
-#define WBURST_LENGTH_BL (0 << 19)
-#define WBURST_LENGTH_SINGLE (1 << 19)
-#define CAS_2 (2 << 14)
-#define CAS_3 (3 << 14)
-#define BAT_SEQUENTIAL (0 << 13)
-#define BAT_INTERLEAVED (1 << 13)
-#define OPM_NORMAL (0 << 17)
-#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
-
-
-#define TIMER1_BASE (0x80000C00)
-
-/*
- * special lookup flags
- */
-#define DO_MEM_DELAY 1
-#define DO_MEM_READ 2
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- mov r9, lr @ save return address
-
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads INITMEM_DATA out of FLASH rather than memory ! */
- /* r0 = current word pointer */
- /* r1 = end word location, one word past last actual word */
- /* r3 = address for writes, special lookup flags */
- /* r4 = value for writes, delay constants, or read addresses */
- /* r2 = location for mem reads */
-
- ldr r0, =INITMEM_DATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- add r1, r0, #112
-
-mem_loop:
- cmp r1, r0
- moveq pc, r9 @ Done
-
- ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay
- ldr r4, [r0], #4 @ value
-
- cmp r3, #DO_MEM_DELAY
- bleq mem_delay
- beq mem_loop
- cmp r3, #DO_MEM_READ
- ldreq r2, [r4]
- beq mem_loop
- str r4, [r3] @ normal register/ram store
- b mem_loop
-
-mem_delay:
- ldr r5, =TIMER1_BASE
- mov r6, r4, LSR #1 @ timer resolution is ~2us
- str r6, [r5]
- mov r6, #0x88 @ using 508.469KHz clock, enable
- str r6, [r5, #8]
-0: ldr r6, [r5, #4] @ timer value
- cmp r6, #0
- bne 0b
- mov r6, #0 @ disable timer
- str r6, [r5, #8]
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-INITMEM_DATA:
- .word BCR0
- .word BCR0_FLASH
- .word BCR6
- .word BCR6_CPLD_SLOW
- .word BCR7
- .word BCR7_CPLD_FAST
- .word SDCSCX_BASE
- .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
- .word GBLCNFG
- .word GC_CMD_NOP
- .word DO_MEM_DELAY
- .word 200
- .word GBLCNFG
- .word GC_CMD_PRECHARGEALL
- .word RFSHTMR
- .word RFSHTMR_INIT
- .word DO_MEM_DELAY
- .word 8
- .word RFSHTMR
- .word RFSHTMR_NORMAL
- .word GBLCNFG
- .word GC_CMD_MODE
- .word DO_MEM_READ
- .word (SDRAM_BASE | SDRAM_DEVICE_MODE)
- .word GBLCNFG
- .word GC_CMD_NORMAL
- .word SDCSCX_BASE
- .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
deleted file mode 100644
index 437dad0..0000000
--- a/board/lpd7a40x/lpd7a40x.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_LH7A400)
-#include <lh7a400.h>
-#elif defined(CONFIG_LH7A404)
-#include <lh7a404.h>
-#else
-#error "No CPU defined!"
-#endif
-#include <asm/mach-types.h>
-
-#include <lpd7a400_cpld.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* set up the I/O ports */
-
- /* enable flash programming */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
-
- /* Auto wakeup, LCD disable, WLAN enable */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
- ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
-
- /* Status LED 2 on (leds are active low) */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
- (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
-
-#if defined(CONFIG_LH7A400)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
-#elif defined(CONFIG_LH7A404)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A404;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index f47e9ae..b43fcf5 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -172,8 +172,6 @@ actux4 arm ixp
dvlhost arm ixp
ixdp425 arm ixp
ixdpg425 arm ixp ixdp425
-lpd7a400 arm lh7a40x lpd7a40x
-lpd7a404 arm lh7a40x lpd7a40x
balloon3 arm pxa
cerf250 arm pxa
colibri_pxa270 arm pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 0dd2740..9091560 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
edb9302 arm arm920t - 2011-07-17
edb9302a arm arm920t - 2011-07-17
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
deleted file mode 100644
index 91bf1fa..0000000
--- a/include/configs/lpd7a400-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A400_10_H
-#define __LPD7A400_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
deleted file mode 100644
index 06f3d7e..0000000
--- a/include/configs/lpd7a400.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A400_H_
-#define __LPD7A400_H_
-
-#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A400-10 card engine
- */
-#include <configs/lpd7a400-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A400_H_ */
diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h
deleted file mode 100644
index b10e69d..0000000
--- a/include/configs/lpd7a404-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A404_10_H
-#define __LPD7A404_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A404_10_H */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
deleted file mode 100644
index 7535f62..0000000
--- a/include/configs/lpd7a404.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A404_H_
-#define __LPD7A404_H_
-
-#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A404-10 card engine
- */
-#include <configs/lpd7a404-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A404_H_ */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 30/52] ARM: remove broken "mx1fs2" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (28 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 29/52] ARM: remove broken "lpd7a40x" boards Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-18 12:36 ` Stefano Babic
2011-07-17 22:16 ` [U-Boot] [PATCH 31/52] ARM: remove broken "netstar" board Wolfgang Denk
` (23 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/mx1fs2/Makefile | 51 ---
board/mx1fs2/config.mk | 10 -
board/mx1fs2/flash.c | 849 ------------------------------------------
board/mx1fs2/intel.h | 99 -----
board/mx1fs2/lowlevel_init.S | 188 ----------
board/mx1fs2/mx1fs2.c | 122 ------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/mx1fs2.h | 305 ---------------
10 files changed, 1 insertions(+), 1626 deletions(-)
delete mode 100644 board/mx1fs2/Makefile
delete mode 100644 board/mx1fs2/config.mk
delete mode 100644 board/mx1fs2/flash.c
delete mode 100644 board/mx1fs2/intel.h
delete mode 100644 board/mx1fs2/lowlevel_init.S
delete mode 100644 board/mx1fs2/mx1fs2.c
delete mode 100644 include/configs/mx1fs2.h
diff --git a/MAKEALL b/MAKEALL
index 5873636..45a67bc 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -315,7 +315,6 @@ LIST_ARM9=" \
magnesium \
mv88f6281gtw_ge \
mx1ads \
- mx1fs2 \
netstar \
nhk8815 \
nhk8815_onenand \
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
deleted file mode 100644
index c55b695..0000000
--- a/board/mx1fs2/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := mx1fs2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
deleted file mode 100644
index eb4d046..0000000
--- a/board/mx1fs2/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of IMX sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
deleted file mode 100644
index da4ebe6..0000000
--- a/board/mx1fs2/flash.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
-#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-#if 0
-static ulong flash_get_size(FPWV * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-#endif
-static void flash_reset(flash_info_t * info);
-static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
-#define write_word(in, de, da) write_word_amd(in, de, da)
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t * info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong
-flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (FLASH_MAN_AMD & FLASH_VENDMASK) |
- (FLASH_AM640U & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- switch (i) {
- case 0:
- flashbase = MX1FS2_FLASH_BASE;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_reset(flash_info_t * info)
-{
- FPWV *base = (FPWV *) (info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW) 0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW) 0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void
-flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set up sector start address table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * sect_size);
- }
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-
-void
-flash_print_info(flash_info_t * info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- char *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_BM:
- printf("BRIGHT MICRO ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
- case FLASH_MAN_INTEL:
- printf("INTEL ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- } else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf(fmt, bootletter, boottype);
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf("\n ");
- }
-
- printf(" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-#if 0
-ulong
-flash_get_size(FPWV * addr, flash_info_t * info)
-{
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
- addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
- addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- switch (addr[0] & 0xff) {
-
- case (uchar) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN)
- switch (addr[1]) {
-
- case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets((ulong) addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-#endif /* 0 */
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void
-flash_sync_real_protect(flash_info_t * info)
-{
- FPWV *addr = (FPWV *) (info->start[0]);
- FPWV *sect;
- int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- /* check for protected sectors */
- *addr = (FPW) 0x00900090;
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but mixed protected and unprotected devices
- * within a sector should never happen.
- */
- sect = (FPWV *) (info->start[i]);
- info->protect[i] =
- (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- break;
- }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_AM640U:
- break;
- case FLASH_UNKNOWN:
- default:
- printf("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr = (FPWV *) (info->start[sect]);
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
- } else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *) (info->start[0]);
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00800080; /* erase mode */
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- *addr = (FPW) 0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay(1000);
-
- while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
- flash_reset(info); /* reset to read mode */
- }
-
- printf(" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int
-bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof (data), left -= sizeof (data) - bytes) {
-
- bytes = addr & (sizeof (data) - 1);
- addr &= ~(sizeof (data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof (data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left)
- data += *((uchar *) addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd(info, (FPWV *) addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel(info, (FPWV *) addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
- *
- * @return error code
- */
-
-int
-write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /* handle unaligned start bytes */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /* handle word aligned part */
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((FPW *) src);
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- src += sizeof (FPW);
- wp += sizeof (FPW);
- cnt -= sizeof (FPW);
- }
-
- if (cnt == 0)
- return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word(info, (FPWV *)wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *) (info->start[0]);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while (res == 0
- && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00F000F0; /* reset bank */
- printf("SHA timeout\n");
- res = 1;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
- *dest = (FPW) 0x00400040; /* program setup */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW) 0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
-
- return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int
-flash_real_protect(flash_info_t * info, long sector, int prot)
-{
- int rcode = 0; /* assume success */
- FPWV *addr; /* address of sector */
- FPW value;
-
- addr = (FPWV *) (info->start[sector]);
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- flash_reset(info); /* make sure in read mode */
- *addr = (FPW) 0x00600060L; /* lock command setup */
- if (prot)
- *addr = (FPW) 0x00010001L; /* lock sector */
- else
- *addr = (FPW) 0x00D000D0L; /* unlock sector */
- flash_reset(info); /* reset to read mode */
-
- /* now see if it really is locked/unlocked as requested */
- *addr = (FPW) 0x00900090;
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but return failure. Mixed protected and
- * unprotected devices within a sector should never happen.
- */
- value = addr[2] & (FPW) 0x00010001;
- if (value == 0)
- info->protect[sector] = 0;
- else if (value == (FPW) 0x00010001)
- info->protect[sector] = 1;
- else {
- /* error, mixed protected and unprotected */
- rcode = 1;
- info->protect[sector] = 1;
- }
- if (info->protect[sector] != prot)
- rcode = 1; /* failed to protect/unprotect as requested */
-
- /* reload all protection bits from hardware for now */
- flash_sync_real_protect(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- info->protect[sector] = prot;
- break;
- }
-
- return rcode;
-}
-#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
deleted file mode 100644
index 8db5dd4..0000000
--- a/board/mx1fs2/intel.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2002 ETC s.r.o.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2002.
- *
- * Documentation:
- * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
- * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
- * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
- * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- */
-
-#ifndef FLASH_INTEL_H
-#define FLASH_INTEL_H
-
-#include <common.h>
-
-/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
-
-#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
-
-#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
-
-#define CFI_CHIP_INTEL_28F320J3A 0x0016
-#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
-#define CFI_CHIP_INTEL_28F640J3A 0x0017
-#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
-#define CFI_CHIP_INTEL_28F128J3A 0x0018
-#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
-
-/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
-
-#define CFI_CHIP_INTEL_28F640K3 0x8801
-#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
-#define CFI_CHIP_INTEL_28F128K3 0x8802
-#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
-#define CFI_CHIP_INTEL_28F256K3 0x8803
-#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
-#define CFI_CHIP_INTEL_28F640K18 0x8805
-#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
-#define CFI_CHIP_INTEL_28F128K18 0x8806
-#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
-#define CFI_CHIP_INTEL_28F256K18 0x8807
-#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
-
-#endif /* FLASH_INTEL_H */
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
deleted file mode 100644
index 56a4819..0000000
--- a/board/mx1fs2/lowlevel_init.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/imx-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r10, lr
-
-/* Change PERCLK1DIV to 14 ie 14+1 */
- ldr r0, =PCDR
- ldr r1, =CONFIG_SYS_PCDR_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 0 */
-
- ldr r0, =MPCTL0
- ldr r1, =CONFIG_SYS_MPCTL0_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 1 */
-
- ldr r0, =MPCTL1
- ldr r1, =CONFIG_SYS_MPCTL1_VAL
- str r1, [r0]
-
-/* set mpll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<21)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
-/* set System PLL Control Register 0 */
-
- ldr r0, =SPCTL0
- ldr r1, =CONFIG_SYS_SPCTL0_VAL
- str r1, [r0]
-
-/* set System PLL Control Register 1 */
-
- ldr r0, =SPCTL1
- ldr r1, =CONFIG_SYS_SPCTL1_VAL
- str r1, [r0]
-
-/* set spll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<22)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
- ldr r0, =CSCR
- ldr r1, =CONFIG_SYS_CSCR_VAL
- str r1, [r0]
-
- ldr r0, =GPCR
- ldr r1, =CONFIG_SYS_GPCR_VAL
- str r1, [r0]
-
-/*
- * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
- * this.....
- *
- * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
- * register 1, this stops it using the output of the PLL and thus runs at the
- * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
- * use the value set in the CM_OSC registers...regardless of what you set it
- * too! Thus, although i thought i was running at 140MHz, i'm actually running
- *@40!..
- *
- * Slapping this into my bootloader does the trick...
- *
- * MRC p15,0,r0,c1,c0,0 ; read core configuration register
- * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
- * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
- * register
- *
- */
- MRC p15,0,r0,c1,c0,0
-/* ORR r0,r0,#0xC0000000 async mode */
-/* ORR r0,r0,#0x40000000 sync mode */
- ORR r0,r0,#0xC0000000
- MCR p15,0,r0,c1,c0,0
-
- ldr r0, =GIUS(0)
- ldr r1, =CONFIG_SYS_GIUS_A_VAL
- str r1, [r0]
-
- ldr r0, =FMCR
- ldr r1, =CONFIG_SYS_FMCR_VAL
- str r1, [r0]
-
- ldr r0, =CS0U
- ldr r1, =CONFIG_SYS_CS0U_VAL
- str r1, [r0]
-
- ldr r0, =CS0L
- ldr r1, =CONFIG_SYS_CS0L_VAL
- str r1, [r0]
-
- ldr r0, =CS1U
- ldr r1, =CONFIG_SYS_CS1U_VAL
- str r1, [r0]
-
- ldr r0, =CS1L
- ldr r1, =CONFIG_SYS_CS1L_VAL
- str r1, [r0]
-
- ldr r0, =CS4U
- ldr r1, =CONFIG_SYS_CS4U_VAL
- str r1, [r0]
-
- ldr r0, =CS4L
- ldr r1, =CONFIG_SYS_CS4L_VAL
- str r1, [r0]
-
- ldr r0, =CS5U
- ldr r1, =CONFIG_SYS_CS5U_VAL
- str r1, [r0]
-
- ldr r0, =CS5L
- ldr r1, =CONFIG_SYS_CS5L_VAL
- str r1, [r0]
-
-/* SDRAM Setup */
-
- ldr r1,=0x00221000 /* adr of SDCTRL0 */
- ldr r0,=0x92120200
- str r0,[r1,#0] /* put in precharge command mode */
- ldr r2,=0x08200000 /* adr for precharge cmd */
- ldr r0,[r2,#0] /* precharge */
- ldr r0,=0xA2120200
- ldr r2,=0x08000000 /* start of SDRAM */
- str r0,[r1,#0] /* put in auto-refresh mode */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,=0xB2120200
- ldr r2,=0x08111800
- str r0,[r1,#0] /* setup for mode register of SDRAM */
- ldr r0,[r2,#0] /* program mode register */
- ldr r0,=0x82124267
- str r0,[r1,#0] /* back to normal operation */
-
- mov pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
deleted file mode 100644
index 90a33c2..0000000
--- a/board/mx1fs2/mx1fs2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-
-extern void imx_gpio_mode(int gpio_mode);
-
-static void logo_init(void)
-{
- imx_gpio_mode(PD15_PF_LD0);
- imx_gpio_mode(PD16_PF_LD1);
- imx_gpio_mode(PD17_PF_LD2);
- imx_gpio_mode(PD18_PF_LD3);
- imx_gpio_mode(PD19_PF_LD4);
- imx_gpio_mode(PD20_PF_LD5);
- imx_gpio_mode(PD21_PF_LD6);
- imx_gpio_mode(PD22_PF_LD7);
- imx_gpio_mode(PD23_PF_LD8);
- imx_gpio_mode(PD24_PF_LD9);
- imx_gpio_mode(PD25_PF_LD10);
- imx_gpio_mode(PD26_PF_LD11);
- imx_gpio_mode(PD27_PF_LD12);
- imx_gpio_mode(PD28_PF_LD13);
- imx_gpio_mode(PD29_PF_LD14);
- imx_gpio_mode(PD30_PF_LD15);
- imx_gpio_mode(PD14_PF_FLM_VSYNC);
- imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
- imx_gpio_mode(PD11_PF_CONTRAST);
- imx_gpio_mode(PD10_PF_SPL_SPR);
-
- LCDC_RMCR = 0x00000000;
- LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
- LCDC_HCR = HCR_H_WIDTH(2);
- LCDC_VCR = VCR_V_WIDTH(2);
-
- LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */
- LCDC_SSA = 0x10040000; /* image in flash */
-
- LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */
-
- LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */
- LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */
-
- /* disable Cursor */
- LCDC_CPOS = 0x00000000;
-
- /* fixed burst length */
- LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
-
- /* enable LCD */
- DR(3) |= 0x00001000;
- LCDC_RMCR = RMCR_LCDC_EN;
-
-}
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
- gd->bd->bi_boot_params = 0x08000100;
-serial_init();
- logo_init();
- return 0;
-}
-
-int
-dram_init(void)
-{
-#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
- gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
-#endif
- return 0;
-}
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- */
-
-void
-show_boot_progress(int status)
-{
- /* We use this as a hook to disable serial ports just before booting
- * This way we suppress the "uncompressing linux..." message
- */
-#ifdef CONFIG_SILENT_CONSOLE
- if( status == 8) {
- if( getenv("silent") != NULL ) {
- *(volatile unsigned long *)0x206080 &= ~1;
- *(volatile unsigned long *)0x207080 &= ~1;
- }
- }
-#endif
- return;
-}
diff --git a/boards.cfg b/boards.cfg
index b43fcf5..20a4f98 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -53,7 +53,6 @@ kb9202 arm arm920t - -
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
-mx1fs2 arm arm920t - - imx
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 9091560..501d702 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
edb9302 arm arm920t - 2011-07-17
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
deleted file mode 100644
index ddbc65a..0000000
--- a/include/configs/mx1fs2.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
-#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
-#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
-
-/*
- * Select serial console configuration
- */
-#undef _CONFIG_UART1 /* internal uart 1 */
-#define _CONFIG_UART2 /* internal uart 2 */
-#undef _CONFIG_UART3 /* internal uart 3 */
-#undef _CONFIG_UART4 /* internal uart 4 */
-#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SOURCE
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- */
-#define CONFIG_BOOTDELAY 10
-#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND "bootm 10080000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP /* undef saves memory */
-#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */
-#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
-
-#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
-#define CONFIG_SYS_MEMTEST_END 0x08F00000
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG 1 /* send initrd params */
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-#define CONFIG_STACKSIZE (120<<10) /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
-#endif
-
-/* SDRAM Setup Values
- * 0x910a8300 Precharge Command CAS 3
- * 0x910a8200 Precharge Command CAS 2
- *
- * 0xa10a8300 AutoRefresh Command CAS 3
- * 0xa10a8200 Set AutoRefresh Command CAS 2
- */
-#define PRECHARGE_CMD 0x910a8300
-#define AUTOREFRESH_CMD 0xa10a8300
-
-#define BUS32BIT_VERSION
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
-#else
-#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
-#endif
-/*
- * Flash Controller settings
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
-
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
-#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
-#else
-#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
-#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
-#endif
-#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
-#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
- is not so clear to me. In other words we can provide more informations
- to user, but this expects more complex flash handling we do not provide
- now.*/
-#undef CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00050000
-*/
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=mx1fs2-0"
-
-#ifdef BUS32BIT_VERSION
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m at 5m(part0),5m at 9m(part1)"
-#else
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)"
-#endif
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-#define CONFIG_SYS_MONITOR_BASE 0x10000000
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
-
-/* Setup CS4 and CS5 */
-#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe
-
-/*
- * CSxU_VAL:
- * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
- * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x00008C00
-#define CONFIG_SYS_CS0L_VAL 0x22222601
-#define CONFIG_SYS_CS1U_VAL 0x00008C00
-#define CONFIG_SYS_CS1L_VAL 0x22222301
-#define CONFIG_SYS_CS4U_VAL 0x00008C00
-#define CONFIG_SYS_CS4L_VAL 0x22222301
-#define CONFIG_SYS_CS5U_VAL 0x00008C00
-#define CONFIG_SYS_CS5L_VAL 0x22222301
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
- f_ref=16,777MHz
-
- 0x002a141f: 191,9944MHz
- 0x040b2007: 144MHz
- 0x042a141f: 96MHz
- 0x0811140d: 64MHz
- 0x040e200e: 150MHz
- 0x00321431: 200MHz
-
- 0x08001800: 64MHz mit 16er Quarz
- 0x04001800: 96MHz mit 16er Quarz
- 0x04002400: 144MHz mit 16er Quarz
-
- 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
- |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
-
-#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD
-#define CONFIG_SYS_MPCTL1_VAL 0x00000040
-#define CONFIG_SYS_PCDR_VAL 0x00010005
-#define CONFIG_SYS_GPCR_VAL 0x00000FFB
-
-#define USE_16M_OSZI /* If you have one, you want to use it
- The internal 32kHz oszillator jitters */
-#ifdef USE_16M_OSZI
-
-#define CONFIG_SYS_SPCTL0_VAL 0x04001401
-#define CONFIG_SYS_SPCTL1_VAL 0x0C000040
-#define CONFIG_SYS_CSCR_VAL 0x07030003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#else
-
-#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1
-#define CONFIG_SYS_CSCR_VAL 0x06000003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16780000
-
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR 0x08400000
-
-#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
- 0x000b00b ->b<- -> 192MHz/12=16MHz
- 0x000b00b ->8<- -> 144MHz/09=16MHz
- 0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef _CONFIG_UART1
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-#elif defined _CONFIG_UART2
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL2
-#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 3686400
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_CONS_INDEX 1
-#ifdef _CONFIG_UART3
-#define CONFIG_SYS_NS16550_COM1 0x15000000
-#elif defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550_COM1 0x16000000
-#endif
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 30/52] ARM: remove broken "mx1fs2" board
2011-07-17 22:16 ` [U-Boot] [PATCH 30/52] ARM: remove broken "mx1fs2" board Wolfgang Denk
@ 2011-07-18 12:36 ` Stefano Babic
0 siblings, 0 replies; 90+ messages in thread
From: Stefano Babic @ 2011-07-18 12:36 UTC (permalink / raw)
To: u-boot
On 07/18/2011 12:16 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> MAKEALL | 1 -
> board/mx1fs2/Makefile | 51 ---
> board/mx1fs2/config.mk | 10 -
> board/mx1fs2/flash.c | 849 ------------------------------------------
> board/mx1fs2/intel.h | 99 -----
> board/mx1fs2/lowlevel_init.S | 188 ----------
> board/mx1fs2/mx1fs2.c | 122 ------
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> include/configs/mx1fs2.h | 305 ---------------
> 10 files changed, 1 insertions(+), 1626 deletions(-)
> delete mode 100644 board/mx1fs2/Makefile
> delete mode 100644 board/mx1fs2/config.mk
> delete mode 100644 board/mx1fs2/flash.c
> delete mode 100644 board/mx1fs2/intel.h
> delete mode 100644 board/mx1fs2/lowlevel_init.S
> delete mode 100644 board/mx1fs2/mx1fs2.c
> delete mode 100644 include/configs/mx1fs2.h
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 31/52] ARM: remove broken "netstar" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (29 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 30/52] ARM: remove broken "mx1fs2" board Wolfgang Denk
@ 2011-07-17 22:16 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 32/52] ARM: remove broken "sbc2410x" board Wolfgang Denk
` (22 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:16 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
board/netstar/Makefile | 95 ---------------
board/netstar/config.mk | 11 --
board/netstar/crcek.S | 241 --------------------------------------
board/netstar/crcek.h | 3 -
board/netstar/crcit.c | 87 --------------
board/netstar/eeprom.c | 218 ----------------------------------
board/netstar/netstar.c | 129 --------------------
board/netstar/setup.S | 284 ---------------------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/netstar.h | 245 --------------------------------------
13 files changed, 1 insertions(+), 1316 deletions(-)
delete mode 100644 board/netstar/Makefile
delete mode 100644 board/netstar/config.mk
delete mode 100644 board/netstar/crcek.S
delete mode 100644 board/netstar/crcek.h
delete mode 100644 board/netstar/crcit.c
delete mode 100644 board/netstar/eeprom.c
delete mode 100644 board/netstar/netstar.c
delete mode 100644 board/netstar/setup.S
delete mode 100644 include/configs/netstar.h
diff --git a/MAKEALL b/MAKEALL
index 45a67bc..4e8c67c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -315,7 +315,6 @@ LIST_ARM9=" \
magnesium \
mv88f6281gtw_ge \
mx1ads \
- netstar \
nhk8815 \
nhk8815_onenand \
omap1510inn \
diff --git a/Makefile b/Makefile
index 01bd96a..314d9cf 100644
--- a/Makefile
+++ b/Makefile
@@ -1048,7 +1048,6 @@ clean:
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
- $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
$(obj)board/armltd/integratorcp/u-boot.lds \
$(obj)u-boot.lds \
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
deleted file mode 100644
index 7230a2f..0000000
--- a/board/netstar/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := netstar.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-$(obj)crcek.srec: $(obj)crcek.o
- $(LD) -g -Ttext 0x00000000 -e crcek -o $(<:.o=) $^
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)crcek.bin: $(obj)crcek.srec
- $(OBJCOPY) -I srec -O binary $< $@
-
-$(obj)crcit: $(obj)crcit.o $(obj)crc32.o
- $(HOSTCC) $(HOSTCFLAGS) -o $@ $^
-
-$(obj)crcit.o: crcit.c
- $(HOSTCC) $(HOSTCFLAGS) -o $@ -c $<
-
-$(obj)crc32.o: $(SRCTREE)/lib/crc32.c
- $(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -I$(TOPDIR)/include \
- -o $@ -c $<
-
-clean:
- rm -f $(SOBJS) $(OBJS) \
- $(obj)eeprom_start.o $(obj)eeprom.o \
- $(obj)eeprom $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.o $(obj)crcek $(obj)crcek.srec $(obj)crcek.bin
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/netstar/config.mk b/board/netstar/config.mk
deleted file mode 100644
index 9e1446e..0000000
--- a/board/netstar/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-# We load ourself to internal RAM at 2001'2000
-# Check map file when changing CONFIG_SYS_TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-#
-
-# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
-CONFIG_SYS_TEXT_BASE = 0x13FC0000
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
deleted file mode 100644
index af35662..0000000
--- a/board/netstar/crcek.S
+++ /dev/null
@@ -1,241 +0,0 @@
-/**
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2.
- *
- * Image layout looks like following:
- * u32 - size
- * u32 - version
- * ... - data
- * u32 - crc32
- */
-
-#include <config.h>
-#include "crcek.h"
-
-/**
- * do_crc32 - calculate CRC32 of given buffer
- * r0 - crc
- * r1 - pointer to buffer
- * r2 - buffer len
- */
- .macro do_crc32
- ldr r5, FFFFFFFF
- eor r0, r0, r5
- adr r3, CRC32_TABLE
-1:
- ldrb r4, [r1], #1
- eor r4, r4, r0
- and r4, r4, #0xff
- ldr r4, [r3, r4, lsl#2]
- eor r0, r4, r0, lsr#8
- subs r2, r2, #0x1
- bne 1b
- eor r0, r0, r5
- .endm
-
- .macro crcuj, offset, size
- mov r0, #0
- ldr r1, \offset
- ldr r2, [r1], #4
- cmp r2, r0 @ no data, no problem
- beq 2f
- tst r2, #3 @ unaligned size
- bne 2f
- ldr r3, \size
- cmp r2, r3 @ bogus size
- bhi 2f
- do_crc32
- ldr r1, [r1]
-2:
- cmp r0, r1
- .endm
-
- .macro wait, reg
- mov \reg, #0x100000
-3:
- subs \reg, \reg, #0x1
- bne 3b
- .endm
-
-.text
-.globl crcek
-crcek:
- /* Enable I-cache */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for at least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, CKCTL_VAL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, EN_CLK_VAL
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
-
- mov r6, #0
- crcuj _LOADER1_OFFSET, _LOADER_SIZE
- bne crc1_bad
- orr r6, r6, #1
-crc1_bad:
- crcuj _LOADER2_OFFSET, _LOADER_SIZE
- bne crc2_bad
- orr r6, r6, #2
-crc2_bad:
- ldr r3, _LOADER1_OFFSET
- ldr r4, _LOADER2_OFFSET
- teq r6, #3
- bne one_is_bad @ one of them (or both) has bad crc
- ldr r1, [r3, #4]
- ldr r2, [r4, #4]
- cmp r1, r2 @ boot 2nd loader if versions differ
- beq boot_1st
- b boot_2nd
-one_is_bad:
- tst r6, #1
- bne boot_1st
- tst r6, #2
- bne boot_2nd
-@ We are doomed, so let user know.
-hell:
- ldr r0, GPIO_BASE @ configure GPIO pins
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-blink_loop:
- mov r1, #0x08
- strh r1, [r0, #0x04]
- wait r3
- mov r1, #0x10
- strh r1, [r0, #0x04]
- wait r3
- b blink_loop
-boot_1st:
- add pc, r3, #8
-boot_2nd:
- add pc, r4, #8
-
-_LOADER_SIZE:
- .word LOADER_SIZE - 8 @ minus size and crc32
-_LOADER1_OFFSET:
- .word LOADER1_OFFSET
-_LOADER2_OFFSET:
- .word LOADER2_OFFSET
-
-FFFFFFFF:
- .word 0xffffffff
-CRC32_TABLE:
- .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
- .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
- .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
- .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
- .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
- .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
- .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
- .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
- .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
- .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
- .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
- .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
- .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
- .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
- .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
- .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
- .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
- .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
- .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
- .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
- .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
- .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
- .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
- .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
- .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
- .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
- .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
- .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
- .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
- .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
- .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
- .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
- .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
- .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
- .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
- .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
- .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
- .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
- .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
- .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
- .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
- .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
- .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
- .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
- .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
- .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
- .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
- .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
- .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
- .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
- .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
- .word 0x2d02ef8d
-
-GPIO_BASE:
- .word 0xfffce000
-MPU_CLKM_BASE:
- .word 0xfffece00
-DPLL1_BASE:
- .word 0xfffecf00
-
-CKCTL_VAL:
- .word OMAP5910_ARM_CKCTL
-EN_CLK_VAL:
- .word OMAP5910_ARM_EN_CLK
-GPIO_DIRECTION:
- .word 0x0000ffe7
-
-.end
diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h
deleted file mode 100644
index 30c0860..0000000
--- a/board/netstar/crcek.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#define LOADER_SIZE (448 * 1024)
-#define LOADER1_OFFSET (128 * 1024)
-#define LOADER2_OFFSET (LOADER1_OFFSET + LOADER_SIZE)
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
deleted file mode 100644
index a162649..0000000
--- a/board/netstar/crcit.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "crcek.h"
-
-extern uint32_t crc32(uint32_t, const unsigned char *, uint);
-
-static uint32_t data[LOADER_SIZE/4 + 3];
-
-static int do_crc(char *path, unsigned version)
-{
- uint32_t *p;
- ssize_t size;
- int fd;
-
- fd = open(path, O_RDONLY);
- if (fd == -1) {
- perror("Error opening file");
- return EXIT_FAILURE;
- }
- p = data + 2;
- size = read(fd, p, LOADER_SIZE + 4);
- if (size == -1) {
- perror("Error reading file");
- return EXIT_FAILURE;
- }
- if (size > LOADER_SIZE) {
- fprintf(stderr, "File too large\n");
- return EXIT_FAILURE;
- }
- size = (size + 3) & ~3; /* round up to 4 bytes */
- size += 4; /* add size of version field */
- data[0] = size;
- data[1] = version;
- data[size/4 + 1] = crc32(0, (unsigned char *)(data + 1), size);
- close(fd);
-
- if (write(STDOUT_FILENO, data, size + 4 /*size*/ + 4 /*crc*/) == -1) {
- perror("Error writing file");
- return EXIT_FAILURE;
- }
-
- return EXIT_SUCCESS;
-}
-
-int main(int argc, char * const *argv)
-{
- if (argc == 2) {
- return do_crc(argv[1], 0);
- } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
- char *endptr, *nptr = argv[2];
- unsigned ver = strtoul(nptr, &endptr, 0);
- if (*nptr != '\0' && *endptr == '\0')
- return do_crc(argv[3], ver);
- }
- fprintf(stderr, "Usage: crcit [-v version] <image>\n");
-
- return EXIT_FAILURE;
-}
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
deleted file mode 100644
index aa375a4..0000000
--- a/board/netstar/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("NetStar EEPROM writer\n"
- "Built: " U_BOOT_DATE "@" U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
deleted file mode 100644
index df1704b..0000000
--- a/board/netstar/netstar.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <flash.h>
-#include <nand.h>
-
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* arch number of NetStar board */
- gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_RTC_DS1307)
- /* enable trickle charge */
- i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
-#endif
- return 0;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
-#if defined(CONFIG_CMD_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
-{
- if (banknum == 0) { /* AM29LV800 boot flash */
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
- }
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_NAND)
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 - don't care
- * NAND_CLE: bit 1 -> bit 1 (0x0002)
- * NAND_ALE: bit 2 -> bit 2 (0x0004)
- */
-static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- nand->options = NAND_SAMSUNG_LP_OPTIONS;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = netstar_nand_hwcontrol;
- nand->chip_delay = 400;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
deleted file mode 100644
index 72e1811..0000000
--- a/board/netstar/setup.S
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-
-#if (PHYS_SDRAM_1_SIZE == SZ_32M)
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#else
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#endif
-
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything (green LED is connected via invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x02080480 @ FUNC_MUX_CTRL_5
- .word 0x0100001c @ FUNC_MUX_CTRL_6
- .word 0x0004800b @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02082248 @ FUNC_MUX_CTRL_A
- .word 0x00000248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x00000800 @ PULL_DWN_CTRL_1
- .word 0x01801000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for@least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also disables Green LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/boards.cfg b/boards.cfg
index 20a4f98..a1b51d8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -60,7 +60,6 @@ sbc2410x arm arm920t - -
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-netstar arm arm925t
voiceblue arm arm925t
omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 501d702..79a4a81 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
deleted file mode 100644
index f159013..0000000
--- a/include/configs/netstar.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP NetStar board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x00000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x4000
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND 0x6000
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-/*
- * The stack size is set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 19
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL 1
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "physmap-flash.0:8k at 16k(env),8k(r_env),448k@576k(u-boot);" \
- "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_BOOTCOMMAND "run fboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autostart=yes\0" \
- "ospart=0\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart;setenv bootargs $bootargs " \
- "root=mtd:rootfs$ospart ro " \
- "rootfstype=jffs2\0" \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs;nboot kernel$ospart\0" \
- "nboot=bootp;run nfsargs;tftp\0"
-
-#if 0 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT \
- "\nNetStar PBX - boot in %d secs...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 32/52] ARM: remove broken "sbc2410x" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (30 preceding siblings ...)
2011-07-17 22:16 ` [U-Boot] [PATCH 31/52] ARM: remove broken "netstar" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board Wolfgang Denk
` (21 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/sbc2410x/Makefile | 51 -----
board/sbc2410x/config.mk | 23 --
board/sbc2410x/flash.c | 431 ----------------------------------------
board/sbc2410x/lowlevel_init.S | 163 ---------------
board/sbc2410x/sbc2410x.c | 193 ------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/sbc2410x.h | 220 --------------------
9 files changed, 1 insertions(+), 1083 deletions(-)
delete mode 100644 board/sbc2410x/Makefile
delete mode 100644 board/sbc2410x/config.mk
delete mode 100644 board/sbc2410x/flash.c
delete mode 100644 board/sbc2410x/lowlevel_init.S
delete mode 100644 board/sbc2410x/sbc2410x.c
delete mode 100644 include/configs/sbc2410x.h
diff --git a/MAKEALL b/MAKEALL
index 4e8c67c..bbe041e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -327,7 +327,6 @@ LIST_ARM9=" \
openrd_ultimate \
portl2 \
rd6281a \
- sbc2410x \
scb9328 \
sheevaplug \
smdk2400 \
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
deleted file mode 100644
index 2b3b781..0000000
--- a/board/sbc2410x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := sbc2410x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk
deleted file mode 100644
index bc01a2d..0000000
--- a/board/sbc2410x/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SMDK2410 has 1 bank of 64 MB DRAM
-#
-# 3000'0000 to 3400'0000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3080'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3300'0000
-
-CONFIG_SYS_TEXT_BASE = 0x33F80000
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
deleted file mode 100644
index abb0935..0000000
--- a/board/sbc2410x/flash.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush (void);
-
-#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
-#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define CMD_READ_ARRAY 0x000000F0
-#define CMD_UNLOCK1 0x000000AA
-#define CMD_UNLOCK2 0x00000055
-#define CMD_ERASE_SETUP 0x00000080
-#define CMD_ERASE_CONFIRM 0x00000030
-#define CMD_PROGRAM 0x000000A0
-#define CMD_UNLOCK_BYPASS 0x00000020
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
-
-#define BIT_ERASE_DONE 0x00000080
-#define BIT_RDY_MASK 0x00000080
-#define BIT_PROGRAM_ERROR 0x00000020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
-#if defined(CONFIG_AMD_LV400)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV400B & FLASH_TYPEMASK);
-#elif defined(CONFIG_AMD_LV800)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV800B & FLASH_TYPEMASK);
-#else
-#error "Unknown flash configured"
-#endif
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j <= 3) {
- /* 1st one is 16 KB */
- if (j == 0) {
- flash_info[i].start[j] =
- flashbase + 0;
- }
-
- /* 2nd and 3rd are both 8 KB */
- if ((j == 1) || (j == 2)) {
- flash_info[i].start[j] =
- flashbase + 0x4000 + (j -
- 1) *
- 0x2000;
- }
-
- /* 4th 32 KB */
- if (j == 3) {
- flash_info[i].start[j] =
- flashbase + 0x8000;
- }
- } else {
- flash_info[i].start[j] =
- flashbase + (j - 3) * MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf ("AMD: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (AMD_ID_LV400B & FLASH_TYPEMASK):
- printf ("1x Amd29LV400BB (4Mbit)\n");
- break;
- case (AMD_ID_LV800B & FLASH_TYPEMASK):
- printf ("1x Amd29LV800BB (8Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
- Done:;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ushort result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (AMD_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked () >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip = TMO;
- break;
- }
-
- if (!chip
- && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip = READY;
-
- if (!chip
- && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
- chip = ERR;
-
- } while (!chip);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_hword (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) dest;
- ushort result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait until flash is ready */
- chip = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip = ERR | TMO;
- break;
- }
- if (!chip && ((result & 0x80) == (data & 0x80)))
- chip = READY;
-
- if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
- result = *addr;
-
- if ((result & 0x80) == (data & 0x80))
- chip = READY;
- else
- chip = ERR;
- }
-
- } while (!chip);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- int l;
- int i, rc;
- ushort data;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_hword (info, wp, data);
-}
diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S
deleted file mode 100644
index 3de9166..0000000
--- a/board/sbc2410x/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/*
- * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
- *
- * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
- */
-
-#define BWSCON 0x48000000
-
-/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW16)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
-
-#define B0_Tacs 0x0
-#define B0_Tcos 0x0
-#define B0_Tacc 0x7
-#define B0_Tcoh 0x0
-#define B0_Tah 0x0
-#define B0_Tacp 0x0
-#define B0_PMC 0x0
-
-#define B1_Tacs 0x0
-#define B1_Tcos 0x0
-#define B1_Tacc 0x7
-#define B1_Tcoh 0x0
-#define B1_Tah 0x0
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0xc
-#define B3_Tcos 0x7
-#define B3_Tacc 0xf
-#define B3_Tcoh 0x1
-#define B3_Tah 0x0
-#define B3_Tacp 0x0
-#define B3_PMC 0x0
-
-#define B4_Tacs 0x0
-#define B4_Tcos 0x0
-#define B4_Tacc 0x7
-#define B4_Tcoh 0x0
-#define B4_Tah 0x0
-#define B4_Tacp 0x0
-#define B4_PMC 0x0
-
-#define B5_Tacs 0xc
-#define B5_Tcos 0x7
-#define B5_Tacc 0xf
-#define B5_Tcoh 0x1
-#define B5_Tah 0x0
-#define B5_Tacp 0x0
-#define B5_PMC 0x0
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1
-#define B6_SCAN 0x1 /* 9bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9bit */
-
-/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 0x0459
-/**************************************/
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #13*4
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0xb2
- .word 0x30
- .word 0x30
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
deleted file mode 100644
index c82382d..0000000
--- a/board/sbc2410x/sbc2410x.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV 0xC3
-#define M_PDIV 0x4
-#define M_SDIV 0x1
-#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
-#define M_MDIV 0x5c
-#define M_PDIV 0x4
-#define M_SDIV 0x0
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV 0xA1
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV 0x48
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x2
-#endif
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->locktime = 0xFFFFFF;
-
- /* configure MPLL */
- clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (4000);
-
- /* configure UPLL */
- clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (8000);
-
- /* set up the I/O ports */
- gpio->gpacon = 0x007FFFFF;
- gpio->gpbcon = 0x00044556;
- gpio->gpbup = 0x000007FF;
- gpio->gpccon = 0xAAAAAAAA;
- gpio->gpcup = 0x0000FFFF;
- gpio->gpdcon = 0xAAAAAAAA;
- gpio->gpdup = 0x0000FFFF;
- gpio->gpecon = 0xAAAAAAAA;
- gpio->gpeup = 0x0000FFFF;
- gpio->gpfcon = 0x000055AA;
- gpio->gpfup = 0x000000FF;
- gpio->gpgcon = 0xFF95FF3A;
- gpio->gpgup = 0x0000FFFF;
- gpio->gphcon = 0x0016FAAA;
- gpio->gphup = 0x000007FF;
-
- gpio->extint0 = 0x22222222;
- gpio->extint1 = 0x22222222;
- gpio->extint2 = 0x22222222;
-
- /* arch number of SMDK2410-Board */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x30000100;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe(ulong physadr);
-
-static inline void NF_Reset(void)
-{
- int i;
-
- NF_SetCE(NFCE_LOW);
- NF_Cmd(0xFF); /* reset command */
- for(i = 0; i < 10; i++); /* tWB = 100ns. */
- NF_WaitRB(); /* wait 200~500us; */
- NF_SetCE(NFCE_HIGH);
-}
-
-static inline void NF_Init(void)
-{
-#if 1
-#define TACLS 0
-#define TWRPH0 3
-#define TWRPH1 0
-#else
-#define TACLS 0
-#define TWRPH0 4
-#define TWRPH1 2
-#endif
-
- NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
- /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
- /* 1 1 1 1, 1 xxx, r xxx, r xxx */
- /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */
-
- NF_Reset();
-}
-
-void nand_init(void)
-{
- struct s3c2410_nand * const nand = s3c2410_get_base_nand();
-
- NF_Init();
-#ifdef DEBUG
- printf("NAND flash probing@0x%.8lX\n", (ulong)nand);
-#endif
- printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index a1b51d8..583b96e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -56,7 +56,6 @@ mx1ads arm arm920t - -
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
-sbc2410x arm arm920t - - s3c24x0
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 79a4a81..902ca9a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
deleted file mode 100644
index f0f19b2..0000000
--- a/include/configs/sbc2410x.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * Configuation settings for the friendly-arm SBC-2410X board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x19000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \
- "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \
- "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.69
-#define CONFIG_SERVERIP 192.168.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "dhcp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "[ ~ljh at GDLC ]# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/* #define CONFIG_AMD_LV400 1 /\* uncomment this if you have a LV400 flash *\/ */
-
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * NAND flash settings
- */
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#endif /* CONFIG_CMD_NAND */
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_CMDLINE_EDITING
-
-#ifdef CONFIG_CMDLINE_EDITING
-#undef CONFIG_AUTO_COMPLETE
-#else
-#define CONFIG_AUTO_COMPLETE
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (31 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 32/52] ARM: remove broken "sbc2410x" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-18 8:02 ` Torsten Koschorrek
2011-07-18 12:24 ` Stefano Babic
2011-07-17 22:17 ` [U-Boot] [PATCH 34/52] ARM: remove broken "smdk2400" board Wolfgang Denk
` (20 subsequent siblings)
53 siblings, 2 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Konstantin Kletschke <kletschke@synertronixx.de>
---
MAINTAINERS | 3 -
MAKEALL | 1 -
board/scb9328/Makefile | 51 ------
board/scb9328/config.mk | 10 --
board/scb9328/flash.c | 324 --------------------------------------
board/scb9328/intel.h | 99 ------------
board/scb9328/lowlevel_init.S | 203 ------------------------
board/scb9328/scb9328.c | 80 ----------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/scb9328.h | 342 -----------------------------------------
11 files changed, 1 insertions(+), 1114 deletions(-)
delete mode 100644 board/scb9328/Makefile
delete mode 100644 board/scb9328/config.mk
delete mode 100644 board/scb9328/flash.c
delete mode 100644 board/scb9328/intel.h
delete mode 100644 board/scb9328/lowlevel_init.S
delete mode 100644 board/scb9328/scb9328.c
delete mode 100644 include/configs/scb9328.h
diff --git a/MAINTAINERS b/MAINTAINERS
index c4c77d1..f3e8579 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -675,9 +675,6 @@ Matthias Kaehlcke <matthias@kaehlcke.net>
edb9315 ARM920T (EP9315)
edb9315a ARM920T (EP9315)
-Konstantin Kletschke <kletschke@synertronixx.de>
- scb9328 ARM920T
-
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index bbe041e..2b90d90 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -327,7 +327,6 @@ LIST_ARM9=" \
openrd_ultimate \
portl2 \
rd6281a \
- scb9328 \
sheevaplug \
smdk2400 \
smdk2410 \
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
deleted file mode 100644
index a980f76..0000000
--- a/board/scb9328/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := scb9328.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk
deleted file mode 100644
index 7c5e067..0000000
--- a/board/scb9328/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of scb93328 sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
deleted file mode 100644
index c6f94ae..0000000
--- a/board/scb9328/flash.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2003 ETC s.r.o.
- *
- * This code was inspired by Marius Groeger and Kyle Harris code
- * available in other board ports for U-Boot
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Written by Peter Figuli <peposh@etc.sk>, 2003.
- *
- */
-
-#include <common.h>
-#include "intel.h"
-
-
-/*
- * This code should handle CFI FLASH memory device. This code is very
- * minimalistic approach without many essential error handling code as well.
- * Because U-Boot actually is missing smart handling of FLASH device,
- * we just set flash_id to anything else to FLASH_UNKNOW, so common code
- * can call us without any restrictions.
- * TODO: Add CFI Query, to be able to determine FLASH device.
- * TODO: Add error handling code
- * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
- * hopefully may work with other configurations.
- */
-
-#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
-# define FLASH_BUS vu_char
-# define FLASH_BUS_RET u_char
-# if ( SCB9328_FLASH_INTERLEAVE == 1 )
-# define FLASH_CMD( x ) x
-# else
-# error "With 8bit bus only one chip is allowed"
-# endif
-
-
-#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
-# define FLASH_BUS vu_short
-# define FLASH_BUS_RET u_short
-# if ( SCB9328_FLASH_INTERLEAVE == 1 )
-# define FLASH_CMD( x ) x
-# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
-# define FLASH_CMD( x ) (( x << 8 )| x )
-# else
-# error "With 16bit bus only 1 or 2 chip(s) are allowed"
-# endif
-
-
-#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
-# define FLASH_BUS vu_long
-# define FLASH_BUS_RET u_long
-# if ( SCB9328_FLASH_INTERLEAVE == 1 )
-# define FLASH_CMD( x ) x
-# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
-# define FLASH_CMD( x ) (( x << 16 )| x )
-# elif ( SCB9328_FLASH_INTERLEAVE == 4 )
-# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
-# else
-# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
-# endif
-
-#else
-# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
-#endif
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static FLASH_BUS_RET flash_status_reg (void)
-{
-
- FLASH_BUS *addr = (FLASH_BUS *) 0;
-
- *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
-
- return *addr;
-}
-
-static int flash_ready (ulong timeout)
-{
- int ok = 1;
-
- reset_timer_masked ();
- while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
- FLASH_CMD (CFI_INTEL_SR_READY)) {
- if (get_timer_masked () > timeout && timeout != 0) {
- ok = 0;
- break;
- }
- }
- return ok;
-}
-
-#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
-# error "SCB9328 platform has only one flash bank!"
-#endif
-
-
-ulong flash_init (void)
-{
- int i;
- unsigned long address = SCB9328_FLASH_BASE;
-
- flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
- flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- flash_info[0].flash_id = INTEL_MANUFACT;
- memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
- flash_info[0].start[i] = address;
-#ifdef SCB9328_FLASH_UNLOCK
- /* Some devices are hw locked after start. */
- *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
- *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
- flash_ready (0);
- *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
-#endif
- address += SCB9328_FLASH_SECT_SIZE;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return SCB9328_FLASH_BANK_SIZE;
-}
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- printf (" Intel vendor\n");
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if (!(i % 5)) {
- printf ("\n");
- }
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, non_protected = 0, sector;
- int rc = ERR_OK;
-
- FLASH_BUS *address;
-
- for (sector = s_first; sector <= s_last; sector++) {
- if (!info->protect[sector]) {
- non_protected++;
- }
- }
-
- if (!non_protected) {
- return ERR_PROTECTED;
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
-
- /* Start erase on unprotected sectors */
- for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
- if (info->protect[sector]) {
- printf ("Protected sector %2d skipping...\n", sector);
- continue;
- } else {
- printf ("Erasing sector %2d ... ", sector);
- }
-
- address = (FLASH_BUS *) (info->start[sector]);
-
- *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
- *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
- if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
- *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
- printf ("ok.\n");
- } else {
- *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
- rc = ERR_TIMOUT;
- printf ("timeout! Aborting...\n");
- break;
- }
- *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
- }
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
- if (flag) {
- enable_interrupts ();
- }
-
- return rc;
-}
-
-static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
-{
- FLASH_BUS *address = (FLASH_BUS *) dest;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*address & data) != data) {
- return ERR_NOT_ERASED;
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- flag = disable_interrupts ();
-
- *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
- *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
- *address = data;
-
- if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
- *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
- rc = ERR_TIMOUT;
- printf ("timeout! Aborting...\n");
- }
-
- *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
- if (flag) {
- enable_interrupts ();
- }
-
- return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong read_addr, write_addr;
- FLASH_BUS data;
- int i, result = ERR_OK;
-
-
- read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
- write_addr = read_addr;
- if (read_addr != addr) {
- data = 0;
- for (i = 0; i < sizeof (FLASH_BUS); i++) {
- if (read_addr < addr || cnt == 0) {
- data |= *((uchar *) read_addr) << i * 8;
- } else {
- data |= (*src++) << i * 8;
- cnt--;
- }
- read_addr++;
- }
- if ((result = write_data (info, write_addr, data)) != ERR_OK) {
- return result;
- }
- write_addr += sizeof (FLASH_BUS);
- }
- for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
- if ((result = write_data (info, write_addr,
- *((FLASH_BUS *) src))) != ERR_OK) {
- return result;
- }
- write_addr += sizeof (FLASH_BUS);
- src += sizeof (FLASH_BUS);
- }
- if (cnt > 0) {
- read_addr = write_addr;
- data = 0;
- for (i = 0; i < sizeof (FLASH_BUS); i++) {
- if (cnt > 0) {
- data |= (*src++) << i * 8;
- cnt--;
- } else {
- data |= *((uchar *) read_addr) << i * 8;
- }
- read_addr++;
- }
- if ((result = write_data (info, write_addr, data)) != 0) {
- return result;
- }
- }
- return ERR_OK;
-}
diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h
deleted file mode 100644
index 77498b6..0000000
--- a/board/scb9328/intel.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2002 ETC s.r.o.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2002.
- *
- * Documentation:
- * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
- * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
- * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
- * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- */
-
-#ifndef FLASH_INTEL_H
-#define FLASH_INTEL_H
-
-#include <common.h>
-
-/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
-
-#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
-
-#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
-
-#define CFI_CHIP_INTEL_28F320J3A 0x0016
-#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
-#define CFI_CHIP_INTEL_28F640J3A 0x0017
-#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
-#define CFI_CHIP_INTEL_28F128J3A 0x0018
-#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
-
-/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
-
-#define CFI_CHIP_INTEL_28F640K3 0x8801
-#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
-#define CFI_CHIP_INTEL_28F128K3 0x8802
-#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
-#define CFI_CHIP_INTEL_28F256K3 0x8803
-#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
-#define CFI_CHIP_INTEL_28F640K18 0x8805
-#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
-#define CFI_CHIP_INTEL_28F128K18 0x8806
-#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
-#define CFI_CHIP_INTEL_28F256K18 0x8807
-#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
-
-#endif /* FLASH_INTEL_H */
diff --git a/board/scb9328/lowlevel_init.S b/board/scb9328/lowlevel_init.S
deleted file mode 100644
index 8e6a49e..0000000
--- a/board/scb9328/lowlevel_init.S
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/imx-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r10, lr
-
-/* Change PERCLK1DIV to 14 ie 14+1 */
- ldr r0, =PCDR
- ldr r1, =CONFIG_SYS_PCDR_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 0 */
-
- ldr r0, =MPCTL0
- ldr r1, =CONFIG_SYS_MPCTL0_VAL
- str r1, [r0]
-
-/* set mpll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<21)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
-/* set System PLL Control Register 0 */
-
- ldr r0, =SPCTL0
- ldr r1, =CONFIG_SYS_SPCTL0_VAL
- str r1, [r0]
-
-/* set spll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<22)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
- ldr r0, =CSCR
- ldr r1, =CONFIG_SYS_CSCR_VAL
- str r1, [r0]
-
-/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
- *this.....
- *
- * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
- * register 1, this stops it using the output of the PLL and thus runs at the
- * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
- * use the value set in the CM_OSC registers...regardless of what you set it
- * too! Thus, although i thought i was running at 140MHz, i'm actually running
- *@40!..
-
- * Slapping this into my bootloader does the trick...
-
- * MRC p15,0,r0,c1,c0,0 ; read core configuration register
- * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
- * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
- * register
- */
- MRC p15,0,r0,c1,c0,0
- ORR r0,r0,#0xC0000000
- MCR p15,0,r0,c1,c0,0
-
- ldr r0, =GPR(0)
- ldr r1, =CONFIG_SYS_GPR_A_VAL
- str r1, [r0]
-
- ldr r0, =GIUS(0)
- ldr r1, =CONFIG_SYS_GIUS_A_VAL
- str r1, [r0]
-
-/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
-
- ldr r0, =FMCR
- ldr r1, =CONFIG_SYS_FMCR_VAL
- str r1, [r0]
-
- ldr r0, =CS0U
- ldr r1, =CONFIG_SYS_CS0U_VAL
- str r1, [r0]
-
- ldr r0, =CS0L
- ldr r1, =CONFIG_SYS_CS0L_VAL
- str r1, [r0]
-
- ldr r0, =CS1U
- ldr r1, =CONFIG_SYS_CS1U_VAL
- str r1, [r0]
-
- ldr r0, =CS1L
- ldr r1, =CONFIG_SYS_CS1L_VAL
- str r1, [r0]
-
- ldr r0, =CS2U
- ldr r1, =CONFIG_SYS_CS2U_VAL
- str r1, [r0]
-
- ldr r0, =CS2L
- ldr r1, =CONFIG_SYS_CS2L_VAL
- str r1, [r0]
-
- ldr r0, =CS3U
- ldr r1, =CONFIG_SYS_CS3U_VAL
- str r1, [r0]
-
- ldr r0, =CS3L
- ldr r1, =CONFIG_SYS_CS3L_VAL
- str r1, [r0]
-
- ldr r0, =CS4U
- ldr r1, =CONFIG_SYS_CS4U_VAL
- str r1, [r0]
-
- ldr r0, =CS4L
- ldr r1, =CONFIG_SYS_CS4L_VAL
- str r1, [r0]
-
- ldr r0, =CS5U
- ldr r1, =CONFIG_SYS_CS5U_VAL
- str r1, [r0]
-
- ldr r0, =CS5L
- ldr r1, =CONFIG_SYS_CS5L_VAL
- str r1, [r0]
-
-/* SDRAM Setup */
-
- ldr r0, =SDCTL0
- ldr r1, =PRECHARGE_CMD
- str r1, [r0]
-
- ldr r0, =0x08200000
- ldr r1, =0x0 /* Issue Precharge all Command */
- str r1, [r0]
-
- ldr r0, =SDCTL0
- ldr r1, =AUTOREFRESH_CMD
- str r1, [r0]
-
- ldr r0, =0x08000000
- ldr r1, =0x0 /* Issue AutoRefresh Command */
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
- str r1, [r0]
-
- ldr r0, =SDCTL0
- ldr r1, =0xb10a8300
- str r1, [r0]
-
- ldr r0, =0x08223000 /* CAS Latency 2 */
- ldr r1, =0x0 /* Issue Mode Register Command, Burst Length = 8 */
- str r1, [r0]
-
- ldr r0, =SDCTL0
- ldr r1, =0x810a8200 /* Set to Normal Mode CAS 2 */
- str r1, [r0]
-
- mov pc,r10
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
deleted file mode 100644
index 428e8c9..0000000
--- a/board/scb9328/scb9328.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-int board_init (void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_SCB9328;
- gd->bd->bi_boot_params = 0x08000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
-#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
- gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
-#endif
-#if ( CONFIG_NR_DRAM_BANKS > 1 )
- gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
- gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE;
-#endif
-#if ( CONFIG_NR_DRAM_BANKS > 2 )
- gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
- gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE;
-#endif
-#if ( CONFIG_NR_DRAM_BANKS > 3 )
- gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
- gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
-#endif
- return 0;
-}
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
- return;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
- return dm9000_initialize(bis);
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 583b96e..084011a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -53,7 +53,6 @@ kb9202 arm arm920t - -
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
-scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 902ca9a..a10edd0 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+scb9328 arm arm920t - 2011-07-17 Konstantin Kletschke <kletschke@synertronixx.de>
sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
deleted file mode 100644
index 6a92ec3..0000000
--- a/include/configs/scb9328.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 2003 ETC s.r.o.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Written by Peter Figuli <peposh@etc.sk>, 2003.
- *
- * 2003/13/06 Initial MP10 Support copied from wepep250
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
-#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
-#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
-
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-/*
- * Select serial console configuration
- */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- * NOTE: Sending parameters to kernel depends on kernel version and
- * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
- * parameters at all! Do not get confused by them so.
- */
-#define CONFIG_BOOTDELAY -1
-#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
-#define CONFIG_BOOTCOMMAND "bootm 10040000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_ETHADDR 80:81:82:83:84:85
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.10.10.9
-#define CONFIG_SERVERIP 10.10.10.10
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP /* undef saves memory */
-#define CONFIG_SYS_PROMPT "scb9328> " /* prompt string */
-#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
-
-#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
-#define CONFIG_SYS_MEMTEST_END 0x08F00000
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG 1 /* send initrd params */
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-#define CONFIG_STACKSIZE (120<<10) /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
-#endif
-
-/* SDRAM Setup Values
-0x910a8300 Precharge Command CAS 3
-0x910a8200 Precharge Command CAS 2
-
-0xa10a8300 AutoRefresh Command CAS 3
-0xa10a8200 Set AutoRefresh Command CAS 2 */
-
-#define PRECHARGE_CMD 0x910a8200
-#define AUTOREFRESH_CMD 0xa10a8200
-
-/*
- * SDRAM Memory Map
- */
-/* SH FIXME */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */
-#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-/*
- * Configuration for FLASH memory for the Synertronixx board
- */
-
-/* #define SCB9328_FLASH_32M */
-
-/* 32MB */
-#ifdef SCB9328_FLASH_32M
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
-#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
-#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
-#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */
-#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
-#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
-#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
-#else
-
-/* 16MB */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
-#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
-#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
-#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */
-#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
-#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
-#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
-#endif /* SCB9328_FLASH_32M */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
- is not so clear to me. In other words we can provide more informations
- to user, but this expects more complex flash handling we do not provide
- now.*/
-#undef CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-/* Setup for PA23 which is Reset Default PA23 but has to become
- CS5 */
-
-#define CONFIG_SYS_GPR_A_VAL 0x00800000
-#define CONFIG_SYS_GIUS_A_VAL 0x0043fffe
-
-#define CONFIG_SYS_MONITOR_BASE 0x10000000
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
-
-/*
- * CSxU_VAL:
- * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
- * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x000F2000
-#define CONFIG_SYS_CS0L_VAL 0x11110d01
-#define CONFIG_SYS_CS1U_VAL 0x000F0a00
-#define CONFIG_SYS_CS1L_VAL 0x11110601
-#define CONFIG_SYS_CS2U_VAL 0x0
-#define CONFIG_SYS_CS2L_VAL 0x0
-
-#define CONFIG_SYS_CS3U_VAL 0x000FFFFF
-#define CONFIG_SYS_CS3L_VAL 0x00000303
-
-#define CONFIG_SYS_CS4U_VAL 0x000F0a00
-#define CONFIG_SYS_CS4L_VAL 0x11110301
-
-/* CNC == 3 too long
- #define CONFIG_SYS_CS5U_VAL 0x0000C210 */
-
-/* #define CONFIG_SYS_CS5U_VAL 0x00008400
- mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
- kaum langsamer ist */
-/* #define CONFIG_SYS_CS5U_VAL 0x00009400
- #define CONFIG_SYS_CS5L_VAL 0x11010D03 */
-
-#define CONFIG_SYS_CS5U_VAL 0x00008400
-#define CONFIG_SYS_CS5L_VAL 0x00000D03
-
-#define CONFIG_NET_MULTI 1
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x16000000
-#define DM9000_IO CONFIG_DM9000_BASE
-#define DM9000_DATA (CONFIG_DM9000_BASE+4)
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
- f_ref=16,777MHz
-
- 0x002a141f: 191,9944MHz
- 0x040b2007: 144MHz
- 0x042a141f: 96MHz
- 0x0811140d: 64MHz
- 0x040e200e: 150MHz
- 0x00321431: 200MHz
-
- 0x08001800: 64MHz mit 16er Quarz
- 0x04001800: 96MHz mit 16er Quarz
- 0x04002400: 144MHz mit 16er Quarz
-
- 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
- |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
-
-#define CPU200
-
-#ifdef CPU200
-#define CONFIG_SYS_MPCTL0_VAL 0x00321431
-#else
-#define CONFIG_SYS_MPCTL0_VAL 0x040e200e
-#endif
-
-/* #define BUS64 */
-#define BUS72
-
-#ifdef BUS72
-#define CONFIG_SYS_SPCTL0_VAL 0x04002400
-#endif
-
-#ifdef BUS96
-#define CONFIG_SYS_SPCTL0_VAL 0x04001800
-#endif
-
-#ifdef BUS64
-#define CONFIG_SYS_SPCTL0_VAL 0x08001800
-#endif
-
-/* Das ist der BCLK Divider, der aus der System PLL
- BCLK und HCLK erzeugt:
- 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
- 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
- 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
- 0x2f001003 : 192MHz/5=38,4MHz
- 0x2f000003 : 64MHz/1
- Bit 22: SPLL Restart
- Bit 21: MPLL Restart */
-
-#ifdef BUS64
-#define CONFIG_SYS_CSCR_VAL 0x2f030003
-#endif
-
-#ifdef BUS72
-#define CONFIG_SYS_CSCR_VAL 0x2f030403
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR 0x08400000
-
-#define MHZ16QUARZINUSE
-
-#ifdef MHZ16QUARZINUSE
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-#else
-#define CONFIG_SYSPLL_CLK_FREQ 16780000
-#endif
-
-#define CONFIG_SYS_CLK_FREQ 16780000
-
-/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
-#define CONFIG_SYS_FMCR_VAL 0x00000001
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
- 0x000b00b ->b<- -> 192MHz/12=16MHz
- 0x000b00b ->8<- -> 144MHz/09=16MHz
- 0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef BUS96
-#define CONFIG_SYS_PCDR_VAL 0x000b00b5
-#endif
-
-#ifdef BUS64
-#define CONFIG_SYS_PCDR_VAL 0x000b00b3
-#endif
-
-#ifdef BUS72
-#define CONFIG_SYS_PCDR_VAL 0x000b00b8
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-17 22:17 ` [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board Wolfgang Denk
@ 2011-07-18 8:02 ` Torsten Koschorrek
2011-07-18 8:29 ` Albert ARIBAUD
2011-07-18 12:24 ` Stefano Babic
1 sibling, 1 reply; 90+ messages in thread
From: Torsten Koschorrek @ 2011-07-18 8:02 UTC (permalink / raw)
To: u-boot
Hello,
a patch for this board is in u-boot-imx already, a patch that changes
the maintainer is in u-boot-arm.
Thanks,
Torsten
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-18 8:02 ` Torsten Koschorrek
@ 2011-07-18 8:29 ` Albert ARIBAUD
2011-07-18 12:38 ` Stefano Babic
0 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 8:29 UTC (permalink / raw)
To: u-boot
Hi all,
Le 18/07/2011 10:02, Torsten Koschorrek a ?crit :
> Hello,
>
> a patch for this board is in u-boot-imx already, a patch that changes
> the maintainer is in u-boot-arm.
Indeed -- note that the bugfix patch was committed to the imx tree after
the lst pull request to ARM, so it is not yet pulled in ARM, but will as
soon as the new IMX pull req is posted.
> Thanks,
> Torsten
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-18 8:29 ` Albert ARIBAUD
@ 2011-07-18 12:38 ` Stefano Babic
0 siblings, 0 replies; 90+ messages in thread
From: Stefano Babic @ 2011-07-18 12:38 UTC (permalink / raw)
To: u-boot
On 07/18/2011 10:29 AM, Albert ARIBAUD wrote:
> Hi all,
>
> Le 18/07/2011 10:02, Torsten Koschorrek a ?crit :
>> Hello,
>>
>> a patch for this board is in u-boot-imx already, a patch that changes
>> the maintainer is in u-boot-arm.
>
> Indeed -- note that the bugfix patch was committed to the imx tree after
> the lst pull request to ARM, so it is not yet pulled in ARM, but will as
> soon as the new IMX pull req is posted.
Right. Wolfgang starts dropping now all obsolete boards, and we should
only advise him which boards from the list will be fixed (or as the
scb9328, which are already fixed), and which ones we can remove because
we do not receive as maintainers any patch in the time the window was open.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-17 22:17 ` [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board Wolfgang Denk
2011-07-18 8:02 ` Torsten Koschorrek
@ 2011-07-18 12:24 ` Stefano Babic
2011-07-18 12:31 ` Wolfgang Denk
1 sibling, 1 reply; 90+ messages in thread
From: Stefano Babic @ 2011-07-18 12:24 UTC (permalink / raw)
To: u-boot
On 07/18/2011 12:17 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Konstantin Kletschke <kletschke@synertronixx.de>
> ---
> MAINTAINERS | 3 -
> MAKEALL | 1 -
> board/scb9328/Makefile | 51 ------
> board/scb9328/config.mk | 10 --
> board/scb9328/flash.c | 324 --------------------------------------
> board/scb9328/intel.h | 99 ------------
> board/scb9328/lowlevel_init.S | 203 ------------------------
> board/scb9328/scb9328.c | 80 ----------
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> include/configs/scb9328.h | 342 -----------------------------------------
> 11 files changed, 1 insertions(+), 1114 deletions(-)
> delete mode 100644 board/scb9328/Makefile
> delete mode 100644 board/scb9328/config.mk
> delete mode 100644 board/scb9328/flash.c
> delete mode 100644 board/scb9328/intel.h
> delete mode 100644 board/scb9328/lowlevel_init.S
> delete mode 100644 board/scb9328/scb9328.c
> delete mode 100644 include/configs/scb9328.h
>
NAK. The patch to fix this board was already sent and it was repost last
week because I asked for some changes. I merged it into u-boot-imx and
it is ready for the next pull request.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board
2011-07-18 12:24 ` Stefano Babic
@ 2011-07-18 12:31 ` Wolfgang Denk
0 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 12:31 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4E2425EC.5030105@denx.de> you wrote:
>
> NAK. The patch to fix this board was already sent and it was repost last
> week because I asked for some changes. I merged it into u-boot-imx and
> it is ready for the next pull request.
Then please send this pull request ASAP, so we get this fixed.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A secure program has to be robust: it must be able to deal with
conditions that "can't happen", whether user input, program error or
library/etc. This is basic damage control. Buffer overflow errors
have nothing to do with security, but everything with stupidity.
-- Wietse Venema in <5cnqm3$8r9@spike.porcupine.org>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 34/52] ARM: remove broken "smdk2400" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (32 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 33/52] ARM: remove broken "scb9328" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 35/52] ARM: remove broken "spearXXX" boards Wolfgang Denk
` (19 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/samsung/smdk2400/Makefile | 51 ----
board/samsung/smdk2400/config.mk | 25 --
board/samsung/smdk2400/flash.c | 490 --------------------------------
board/samsung/smdk2400/lowlevel_init.S | 163 -----------
board/samsung/smdk2400/smdk2400.c | 125 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/smdk2400.h | 189 ------------
10 files changed, 1 insertions(+), 1049 deletions(-)
delete mode 100644 board/samsung/smdk2400/Makefile
delete mode 100644 board/samsung/smdk2400/config.mk
delete mode 100644 board/samsung/smdk2400/flash.c
delete mode 100644 board/samsung/smdk2400/lowlevel_init.S
delete mode 100644 board/samsung/smdk2400/smdk2400.c
delete mode 100644 include/configs/smdk2400.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f3e8579..82281b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -661,10 +661,6 @@ Grazvydas Ignotas <notasas@gmail.com>
omap3_pandora ARM ARMV7 (OMAP3xx SoC)
-Gary Jennejohn <garyj@denx.de>
-
- smdk2400 ARM920T
-
Matthias Kaehlcke <matthias@kaehlcke.net>
edb9301 ARM920T (EP9301)
edb9302 ARM920T (EP9302)
diff --git a/MAKEALL b/MAKEALL
index 2b90d90..788c5b6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -328,7 +328,6 @@ LIST_ARM9=" \
portl2 \
rd6281a \
sheevaplug \
- smdk2400 \
smdk2410 \
spear300 \
spear310 \
diff --git a/board/samsung/smdk2400/Makefile b/board/samsung/smdk2400/Makefile
deleted file mode 100644
index 0c45d02..0000000
--- a/board/samsung/smdk2400/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := smdk2400.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/samsung/smdk2400/config.mk b/board/samsung/smdk2400/config.mk
deleted file mode 100644
index 4c27dc3..0000000
--- a/board/samsung/smdk2400/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SAMSUNG board with S3C2400X (ARM920T) CPU
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SAMSUNG has 1 bank of 32 MB DRAM
-#
-# 0C00'0000 to 0E00'0000
-#
-# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
-# optionally with a ramdisk at 0c80'0000
-#
-# we load ourself to 0CF80000 (must be high enough not to be
-# overwritten by the uncompessing Linux kernel)
-#
-# download area is 0C80'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x0CF80000
diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c
deleted file mode 100644
index fb69c21..0000000
--- a/board/samsung/smdk2400/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 2 x 8 MB */
-#define MAIN_SECT_SIZE 0x40000 /* 2 x 128 kB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done: ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/samsung/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S
deleted file mode 100644
index c275c07..0000000
--- a/board/samsung/smdk2400/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for the Samsung development board by
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-/*
- *
- * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
- *
- * Copyright (C) 2001 Samsung Electronics by chc, 010406
- *
- * S3C2400 specific tweaks.
- *
- */
-
-/* memory controller */
-#define BWSCON 0x14000000
-#define BANKCON3 0x14000010 /* for cs8900, ethernet */
-
-/* Bank0 */
-#define B0_Tacs 0x0 /* 0 clk */
-#define B0_Tcos 0x0 /* 0 clk */
-#define B0_Tacc 0x7 /* 14 clk */
-#define B0_Tcoh 0x0 /* 0 clk */
-#define B0_Tah 0x0 /* 0 clk */
-#define B0_Tacp 0x0
-#define B0_PMC 0x0 /* normal */
-
-/* Bank1 */
-#define B1_Tacs 0x0 /* 0 clk */
-#define B1_Tcos 0x0 /* 0 clk */
-#define B1_Tacc 0x7 /* 14 clk */
-#define B1_Tcoh 0x0 /* 0 clk */
-#define B1_Tah 0x0 /* 0 clk */
-#define B1_Tacp 0x0
-#define B1_PMC 0x0 /* normal */
-
-/* Bank2 */
-#define B2_Tacs 0x0 /* 0 clk */
-#define B2_Tcos 0x0 /* 0 clk */
-#define B2_Tacc 0x7 /* 14 clk */
-#define B2_Tcoh 0x0 /* 0 clk */
-#define B2_Tah 0x0 /* 0 clk */
-#define B2_Tacp 0x0
-#define B2_PMC 0x0 /* normal */
-
-/* Bank3 - setup for the cs8900 */
-#define B3_Tacs 0x0 /* 0 clk */
-#define B3_Tcos 0x3 /* 4 clk */
-#define B3_Tacc 0x7 /* 14 clk */
-#define B3_Tcoh 0x1 /* 1 clk */
-#define B3_Tah 0x0 /* 0 clk */
-#define B3_Tacp 0x3 /* 6 clk */
-#define B3_PMC 0x0 /* normal */
-
-/* Bank4 */
-#define B4_Tacs 0x0 /* 0 clk */
-#define B4_Tcos 0x0 /* 0 clk */
-#define B4_Tacc 0x7 /* 14 clk */
-#define B4_Tcoh 0x0 /* 0 clk */
-#define B4_Tah 0x0 /* 0 clk */
-#define B4_Tacp 0x0
-#define B4_PMC 0x0 /* normal */
-
-/* Bank5 */
-#define B5_Tacs 0x0 /* 0 clk */
-#define B5_Tcos 0x0 /* 0 clk */
-#define B5_Tacc 0x7 /* 14 clk */
-#define B5_Tcoh 0x0 /* 0 clk */
-#define B5_Tah 0x0 /* 0 clk */
-#define B5_Tacp 0x0
-#define B5_PMC 0x0 /* normal */
-
-/* Bank6 */
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1 /* 3clk */
-#define B6_SCAN 0x1 /* 9 bit */
-
-/* Bank7 */
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9 bit */
-
-/* refresh parameter */
-#define REFEN 0x1 /* enable refresh */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
-#define Trp 0x0 /* 2 clk */
-#define Trc 0x3 /* 7 clk */
-#define Tchr 0x2 /* 3 clk */
-
-#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #52
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
- .word 0x30 /* MRSR6, CL=3clk */
- .word 0x30 /* MRSR7 */
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
deleted file mode 100644
index 895bd77..0000000
--- a/board/samsung/smdk2400/smdk2400.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void);
-int mdm_init (bd_t *);
-extern void disable_putc(void);
-extern void enable_putc(void);
-extern int hwflow_onoff(int);
-extern int do_mdm_init; /* defined in common/main.c */
-#endif /* CONFIG_MODEM_SUPPORT */
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* memory and cpu-speed are setup before relocation */
- /* change the clock to be 50 MHz 1:1:1 */
- clk_power->mpllcon = 0x5c042;
- clk_power->clkdivn = 0;
- /* set up the I/O ports */
- gpio->pacon = 0x3ffff;
- gpio->pbcon = 0xaaaaaaaa;
- gpio->pbup = 0xffff;
- gpio->pecon = 0x0;
- gpio->peup = 0x0;
-#ifdef CONFIG_HWFLOW
- /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 10, 10, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0xa22;
- /* Disable pull-up on Rx, Tx, CTS and RTS pins */
- gpio->pfup = 0x35;
-#else
- /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 00, 00, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0x22;
- /* Disable pull-up on Rx and Tx pins */
- gpio->pfup = 0x5;
-#endif /* CONFIG_HWFLOW */
- gpio->pgcon = 0x0;
- gpio->pgup = 0x0;
- gpio->opencr = 0x0;
-
- /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x0C000100;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (key_pressed()) {
- disable_putc(); /* modem doesn't understand banner etc */
- do_mdm_init = 1;
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void)
-{
- int rc;
- if (1) { /* check for button push here, now just return 1 */
- rc = 1;
- }
-
- return rc;
-}
-#endif /* CONFIG_MODEM_SUPPORT */
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 084011a..7f54484 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -56,7 +56,6 @@ mx1ads arm arm920t - -
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
-smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
voiceblue arm arm925t
omap1510inn arm arm925t - ti
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index a10edd0..b147fb6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
scb9328 arm arm920t - 2011-07-17 Konstantin Kletschke <kletschke@synertronixx.de>
sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
deleted file mode 100644
index 064749e..0000000
--- a/include/configs/smdk2400.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- *
- * Configuation settings for the SAMSUNG board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */
-#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SAMSUNG */
-
-#undef CONFIG_HWFLOW /* include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* enable modem initialization stuff */
-
-/*
- * The following enables modem debugging stuff. The dbg() and
- * 'char screen[1024]' are used for debug printfs. Unfortunately,
- * it is usable only from BDI
- */
-#undef CONFIG_MODEM_SUPPORT_DEBUG
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-/* Use s3c2400's RTC */
-#define CONFIG_RTC_S3C24X0 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SNTP
-
-#if defined(CONFIG_HWFLOW)
- #define CONFIG_CONFIG_HWFLOW
-#endif
-
-#if !defined(USE_920T_MMU)
- #undef CONFIG_CMD_CACHE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 134.98.93.36
-#define CONFIG_SERVERIP 134.98.93.22
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 0x40000
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 35/52] ARM: remove broken "spearXXX" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (33 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 34/52] ARM: remove broken "smdk2400" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-19 11:06 ` Vipin Kumar
2011-07-17 22:17 ` [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards Wolfgang Denk
` (18 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Remove spear300, spear310, spear320, and spear600 boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 7 -
MAKEALL | 4 -
board/spear/common/Makefile | 54 ------
board/spear/common/spr_lowlevel_init.S | 195 ---------------------
board/spear/common/spr_misc.c | 293 --------------------------------
board/spear/spear300/Makefile | 51 ------
board/spear/spear300/config.mk | 39 -----
board/spear/spear300/spear300.c | 58 -------
board/spear/spear310/Makefile | 51 ------
board/spear/spear310/config.mk | 44 -----
board/spear/spear310/spear310.c | 59 -------
board/spear/spear320/Makefile | 51 ------
board/spear/spear320/config.mk | 44 -----
board/spear/spear320/spear320.c | 59 -------
board/spear/spear600/Makefile | 51 ------
board/spear/spear600/config.mk | 39 -----
board/spear/spear600/spear600.c | 53 ------
doc/README.scrapyard | 4 +
include/configs/spear-common.h | 212 -----------------------
include/configs/spear3xx.h | 131 --------------
include/configs/spear6xx.h | 43 -----
21 files changed, 4 insertions(+), 1538 deletions(-)
delete mode 100644 board/spear/common/Makefile
delete mode 100644 board/spear/common/spr_lowlevel_init.S
delete mode 100644 board/spear/common/spr_misc.c
delete mode 100644 board/spear/spear300/Makefile
delete mode 100644 board/spear/spear300/config.mk
delete mode 100644 board/spear/spear300/spear300.c
delete mode 100644 board/spear/spear310/Makefile
delete mode 100644 board/spear/spear310/config.mk
delete mode 100644 board/spear/spear310/spear310.c
delete mode 100644 board/spear/spear320/Makefile
delete mode 100644 board/spear/spear320/config.mk
delete mode 100644 board/spear/spear320/spear320.c
delete mode 100644 board/spear/spear600/Makefile
delete mode 100644 board/spear/spear600/config.mk
delete mode 100644 board/spear/spear600/spear600.c
delete mode 100644 include/configs/spear-common.h
delete mode 100644 include/configs/spear3xx.h
delete mode 100644 include/configs/spear6xx.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 82281b0..3f63dc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -699,13 +699,6 @@ Prakash Kumar <prakash@embedx.com>
cerf250 xscale/pxa
-Vipin Kumar <vipin.kumar@st.com>
-
- spear300 ARM926EJS (spear300 Soc)
- spear310 ARM926EJS (spear310 Soc)
- spear320 ARM926EJS (spear320 Soc)
- spear600 ARM926EJS (spear600 Soc)
-
Sergey Lapin <slapin@ossfans.org>
afeb9260 ARM926EJS (AT91SAM9260 SoC)
diff --git a/MAKEALL b/MAKEALL
index 788c5b6..8071fbd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -329,10 +329,6 @@ LIST_ARM9=" \
rd6281a \
sheevaplug \
smdk2410 \
- spear300 \
- spear310 \
- spear320 \
- spear600 \
VCMA9 \
versatile \
versatileab \
diff --git a/board/spear/common/Makefile b/board/spear/common/Makefile
deleted file mode 100644
index e0df6c1..0000000
--- a/board/spear/common/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)board/$(VENDOR)/common)
-endif
-
-LIB = $(obj)lib$(VENDOR).o
-
-COBJS := spr_misc.o
-SOBJS := spr_lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-# This is for $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spear/common/spr_lowlevel_init.S b/board/spear/common/spr_lowlevel_init.S
deleted file mode 100644
index 6fbe579..0000000
--- a/board/spear/common/spr_lowlevel_init.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * (C) Copyright 2006
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-/*
- * platform specific initializations are already done in Xloader
- * Initializations already done include
- * DDR, PLLs, IP's clock enable and reset release etc
- */
-.globl lowlevel_init
-lowlevel_init:
- /* By default, U-Boot switches CPU to low-vector */
- /* Revert this as we work in high vector even in U-Boot */
- mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #0x00002000
- mcr p15, 0, r0, c1, c0, 0
- mov pc, lr
-
-/* void setfreq(unsigned int device, unsigned int frequency) */
-.global setfreq
-setfreq:
- stmfd sp!,{r14}
- stmfd sp!,{r0-r12}
-
- mov r8,sp
- ldr sp,SRAM_STACK_V
-
- /* Saving the function arguements for later use */
- mov r4,r0
- mov r5,r1
-
- /* Putting DDR into self refresh */
- ldr r0,DDR_07_V
- ldr r1,[r0]
- ldr r2,DDR_ACTIVE_V
- bic r1, r1, r2
- str r1,[r0]
- ldr r0,DDR_57_V
- ldr r1,[r0]
- ldr r2,CYCLES_MASK_V
- bic r1, r1, r2
- ldr r2,REFRESH_CYCLES_V
- orr r1, r1, r2, lsl #16
- str r1,[r0]
- ldr r0,DDR_07_V
- ldr r1,[r0]
- ldr r2,SREFRESH_MASK_V
- orr r1, r1, r2
- str r1,[r0]
-
- /* flush pipeline */
- b flush
- .align 5
-flush:
- /* Delay to ensure self refresh mode */
- ldr r0,SREFRESH_DELAY_V
-delay:
- sub r0,r0,#1
- cmp r0,#0
- bne delay
-
- /* Putting system in slow mode */
- ldr r0,SCCTRL_V
- mov r1,#2
- str r1,[r0]
-
- /* Changing PLL(1/2) frequency */
- mov r0,r4
- mov r1,r5
-
- cmp r4,#0
- beq pll1_freq
-
- /* Change PLL2 (DDR frequency) */
- ldr r6,PLL2_FREQ_V
- ldr r7,PLL2_CNTL_V
- b pll2_freq
-
-pll1_freq:
- /* Change PLL1 (CPU frequency) */
- ldr r6,PLL1_FREQ_V
- ldr r7,PLL1_CNTL_V
-
-pll2_freq:
- mov r0,r6
- ldr r1,[r0]
- ldr r2,PLLFREQ_MASK_V
- bic r1,r1,r2
- mov r2,r5,lsr#1
- orr r1,r1,r2,lsl#24
- str r1,[r0]
-
- mov r0,r7
- ldr r1,P1C0A_V
- str r1,[r0]
- ldr r1,P1C0E_V
- str r1,[r0]
- ldr r1,P1C06_V
- str r1,[r0]
- ldr r1,P1C0E_V
- str r1,[r0]
-
-lock:
- ldr r1,[r0]
- and r1,r1,#1
- cmp r1,#0
- beq lock
-
- /* Putting system back to normal mode */
- ldr r0,SCCTRL_V
- mov r1,#4
- str r1,[r0]
-
- /* Putting DDR back to normal */
- ldr r0,DDR_07_V
- ldr r1,[R0]
- ldr r2,SREFRESH_MASK_V
- bic r1, r1, r2
- str r1,[r0]
- ldr r2,DDR_ACTIVE_V
- orr r1, r1, r2
- str r1,[r0]
-
- /* Delay to ensure self refresh mode */
- ldr r0,SREFRESH_DELAY_V
-1:
- sub r0,r0,#1
- cmp r0,#0
- bne 1b
-
- mov sp,r8
- /* Resuming back to code */
- ldmia sp!,{r0-r12}
- ldmia sp!,{pc}
-
-SCCTRL_V:
- .word 0xfca00000
-PLL1_FREQ_V:
- .word 0xfca8000C
-PLL1_CNTL_V:
- .word 0xfca80008
-PLL2_FREQ_V:
- .word 0xfca80018
-PLL2_CNTL_V:
- .word 0xfca80014
-PLLFREQ_MASK_V:
- .word 0xff000000
-P1C0A_V:
- .word 0x1C0A
-P1C0E_V:
- .word 0x1C0E
-P1C06_V:
- .word 0x1C06
-
-SREFRESH_DELAY_V:
- .word 0x9999
-SRAM_STACK_V:
- .word 0xD2800600
-DDR_07_V:
- .word 0xfc60001c
-DDR_ACTIVE_V:
- .word 0x01000000
-DDR_57_V:
- .word 0xfc6000e4
-CYCLES_MASK_V:
- .word 0xffff0000
-REFRESH_CYCLES_V:
- .word 0xf0f0
-SREFRESH_MASK_V:
- .word 0x00010000
-
-.global setfreq_sz
-setfreq_sz:
- .word setfreq_sz - setfreq
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
deleted file mode 100644
index 0562222..0000000
--- a/board/spear/common/spr_misc.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <net.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_emi.h>
-#include <asm/arch/spr_xloader_table.h>
-#include <asm/arch/spr_defs.h>
-
-#define CPU 0
-#define DDR 1
-#define SRAM_REL 0xD2801000
-
-DECLARE_GLOBAL_DATA_PTR;
-static struct chip_data chip_data;
-
-int dram_init(void)
-{
- struct xloader_table *xloader_tb =
- (struct xloader_table *)XLOADER_TABLE_ADDRESS;
- struct xloader_table_1_1 *table_1_1;
- struct xloader_table_1_2 *table_1_2;
- struct chip_data *chip = &chip_data;
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
- PHYS_SDRAM_1_MAXSIZE);
-
- if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
- table_1_1 = &xloader_tb->table.table_1_1;
- chip->dramfreq = table_1_1->ddrfreq;
- chip->dramtype = table_1_1->ddrtype;
-
- } else if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
- table_1_2 = &xloader_tb->table.table_1_2;
- chip->dramfreq = table_1_2->ddrfreq;
- chip->dramtype = table_1_2->ddrtype;
- } else {
- chip->dramfreq = -1;
- }
-
- return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_CMD_NET)
- uchar mac_id[6];
-
- if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
- eth_setenv_enetaddr("ethaddr", mac_id);
-#endif
- setenv("verify", "n");
-
-#if defined(CONFIG_SPEAR_USBTTY)
- setenv("stdin", "usbtty");
- setenv("stdout", "usbtty");
- setenv("stderr", "usbtty");
-#endif
- return 0;
-}
-
-#ifdef CONFIG_SPEAR_EMI
-struct cust_emi_para {
- unsigned int tap;
- unsigned int tsdp;
- unsigned int tdpw;
- unsigned int tdpr;
- unsigned int tdcs;
-};
-
-/* EMI timing setting of m28w640hc of linux kernel */
-const struct cust_emi_para emi_timing_m28w640hc = {
- .tap = 0x10,
- .tsdp = 0x05,
- .tdpw = 0x0a,
- .tdpr = 0x0a,
- .tdcs = 0x05,
-};
-
-/* EMI timing setting of bootrom */
-const struct cust_emi_para emi_timing_bootrom = {
- .tap = 0xf,
- .tsdp = 0x0,
- .tdpw = 0xff,
- .tdpr = 0x111,
- .tdcs = 0x02,
-};
-
-void spear_emi_init(void)
-{
- const struct cust_emi_para *p = &emi_timing_m28w640hc;
- struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
- unsigned int cs;
- unsigned int val, tmp;
-
- val = readl(CONFIG_SPEAR_RASBASE);
-
- if (val & EMI_ACKMSK)
- tmp = 0x3f;
- else
- tmp = 0x0;
-
- writel(tmp, &emi_regs_p->ack);
-
- for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
- writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
- writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
- writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
- writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
- writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
- writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
- &emi_regs_p->bank_regs[cs].control);
- }
-}
-#endif
-
-int spear_board_init(ulong mach_type)
-{
- struct xloader_table *xloader_tb =
- (struct xloader_table *)XLOADER_TABLE_ADDRESS;
- struct xloader_table_1_2 *table_1_2;
- struct chip_data *chip = &chip_data;
-
- gd->bd->bi_arch_number = mach_type;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
-
- /* CPU is initialized to work at 333MHz in Xloader */
- chip->cpufreq = 333;
-
- if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
- table_1_2 = &xloader_tb->table.table_1_2;
- memcpy(chip->version, table_1_2->version,
- sizeof(chip->version));
- }
-
-#ifdef CONFIG_SPEAR_EMI
- spear_emi_init();
-#endif
- return 0;
-}
-
-static int i2c_read_mac(uchar *buffer)
-{
- u8 buf[2];
-
- i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
- /* Check if mac in i2c memory is valid */
- if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
- /* Valid mac address is saved in i2c eeprom */
- i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
- return 0;
- }
-
- return -1;
-}
-
-static int write_mac(uchar *mac)
-{
- u8 buf[2];
-
- buf[0] = (u8)MAGIC_BYTE0;
- buf[1] = (u8)MAGIC_BYTE1;
- i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
- buf[0] = (u8)~MAGIC_BYTE0;
- buf[1] = (u8)~MAGIC_BYTE1;
-
- i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
- /* check if valid MAC address is saved in I2C EEPROM or not? */
- if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
- i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
- puts("I2C EEPROM written with mac address \n");
- return 0;
- }
-
- puts("I2C EEPROM writing failed \n");
- return -1;
-}
-
-int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- void (*sram_setfreq) (unsigned int, unsigned int);
- struct chip_data *chip = &chip_data;
- unsigned char mac[6];
- unsigned int reg, frequency;
- char *s, *e;
- char i2c_mac[20];
-
- if ((argc > 3) || (argc < 2))
- return cmd_usage(cmdtp);
-
- if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
-
- frequency = simple_strtoul(argv[2], NULL, 0);
-
- if (frequency > 333) {
- printf("Frequency is limited to 333MHz\n");
- return 1;
- }
-
- sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
-
- if (!strcmp(argv[1], "cpufreq")) {
- sram_setfreq(CPU, frequency);
- printf("CPU frequency changed to %u\n", frequency);
-
- chip->cpufreq = frequency;
- } else {
- sram_setfreq(DDR, frequency);
- printf("DDR frequency changed to %u\n", frequency);
-
- chip->dramfreq = frequency;
- }
-
- return 0;
- } else if (!strcmp(argv[1], "ethaddr")) {
-
- s = argv[2];
- for (reg = 0; reg < 6; ++reg) {
- mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
- write_mac(mac);
-
- return 0;
- } else if (!strcmp(argv[1], "print")) {
-
- if (chip->cpufreq == -1)
- printf("CPU Freq = Not Known\n");
- else
- printf("CPU Freq = %d MHz\n", chip->cpufreq);
-
- if (chip->dramfreq == -1)
- printf("DDR Freq = Not Known\n");
- else
- printf("DDR Freq = %d MHz\n", chip->dramfreq);
-
- if (chip->dramtype == DDRMOBILE)
- printf("DDR Type = MOBILE\n");
- else if (chip->dramtype == DDR2)
- printf("DDR Type = DDR2\n");
- else
- printf("DDR Type = Not Known\n");
-
- if (!i2c_read_mac(mac)) {
- sprintf(i2c_mac, "%pM", mac);
- printf("Ethaddr (from i2c mem) = %s\n", i2c_mac);
- } else {
- printf("Ethaddr (from i2c mem) = Not set\n");
- }
-
- printf("Xloader Rev = %s\n", chip->version);
-
- return 0;
- }
-
- return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
- "configure chip",
- "chip_config cpufreq/ddrfreq frequency\n"
- "chip_config print");
diff --git a/board/spear/spear300/Makefile b/board/spear/spear300/Makefile
deleted file mode 100644
index b9b0fed..0000000
--- a/board/spear/spear300/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := spear300.o
-SOBJS :=
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spear/spear300/config.mk b/board/spear/spear300/config.mk
deleted file mode 100644
index 11da2c3..0000000
--- a/board/spear/spear300/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2009
-# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-CONFIG_SYS_TEXT_BASE = 0x00700000
-
-ALL += $(obj)u-boot.img
-
-# Environment variables in NAND
-ifeq ($(ENV),NAND)
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
-else
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
-endif
-
-ifeq ($(CONSOLE),USB)
-PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
-endif
diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
deleted file mode 100644
index 60ee544..0000000
--- a/board/spear/spear300/spear300.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-#include <asm/arch/spr_nand.h>
-
-int board_init(void)
-{
- return spear_board_init(MACH_TYPE_SPEAR300);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-int board_nand_init(struct nand_chip *nand)
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-
- if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG30) ||
- ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG31)) {
-
- return spear_nand_init(nand);
- }
-
- return -1;
-}
diff --git a/board/spear/spear310/Makefile b/board/spear/spear310/Makefile
deleted file mode 100644
index 6dce093..0000000
--- a/board/spear/spear310/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := spear310.o
-SOBJS :=
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spear/spear310/config.mk b/board/spear/spear310/config.mk
deleted file mode 100644
index 2b59c39..0000000
--- a/board/spear/spear310/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2009
-# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-CONFIG_SYS_TEXT_BASE = 0x00700000
-
-ALL += $(obj)u-boot.img
-
-# Environment variables in NAND
-ifeq ($(ENV),NAND)
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
-else
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
-endif
-
-# Support parallel flash
-ifeq ($(FLASH),PNOR)
-PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
-endif
-
-ifeq ($(CONSOLE),USB)
-PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
-endif
diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
deleted file mode 100644
index 03dfe16..0000000
--- a/board/spear/spear310/spear310.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2009
- * Ryan Chen, ST Micoelectronics, ryan.chen at st.com.
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-#include <asm/arch/spr_nand.h>
-
-int board_init(void)
-{
- return spear_board_init(MACH_TYPE_SPEAR310);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-int board_nand_init(struct nand_chip *nand)
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-
- if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG30) ||
- ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG31)) {
-
- return spear_nand_init(nand);
- }
-
- return -1;
-}
diff --git a/board/spear/spear320/Makefile b/board/spear/spear320/Makefile
deleted file mode 100644
index f6bd7dd..0000000
--- a/board/spear/spear320/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := spear320.o
-SOBJS :=
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spear/spear320/config.mk b/board/spear/spear320/config.mk
deleted file mode 100644
index 2b59c39..0000000
--- a/board/spear/spear320/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2009
-# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-CONFIG_SYS_TEXT_BASE = 0x00700000
-
-ALL += $(obj)u-boot.img
-
-# Environment variables in NAND
-ifeq ($(ENV),NAND)
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
-else
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
-endif
-
-# Support parallel flash
-ifeq ($(FLASH),PNOR)
-PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
-endif
-
-ifeq ($(CONSOLE),USB)
-PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
-endif
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
deleted file mode 100644
index 2ba2dbb..0000000
--- a/board/spear/spear320/spear320.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2009
- * Ryan Chen, ST Micoelectronics, ryan.chen at st.com.
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-#include <asm/arch/spr_nand.h>
-
-int board_init(void)
-{
- return spear_board_init(MACH_TYPE_SPEAR320);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-int board_nand_init(struct nand_chip *nand)
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-
- if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG30) ||
- ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG31)) {
-
- return spear_nand_init(nand);
- }
-
- return -1;
-}
diff --git a/board/spear/spear600/Makefile b/board/spear/spear600/Makefile
deleted file mode 100644
index 6b643bf..0000000
--- a/board/spear/spear600/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := spear600.o
-SOBJS :=
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spear/spear600/config.mk b/board/spear/spear600/config.mk
deleted file mode 100644
index 11da2c3..0000000
--- a/board/spear/spear600/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2009
-# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-CONFIG_SYS_TEXT_BASE = 0x00700000
-
-ALL += $(obj)u-boot.img
-
-# Environment variables in NAND
-ifeq ($(ENV),NAND)
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
-else
-PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
-endif
-
-ifeq ($(CONSOLE),USB)
-PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
-endif
diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
deleted file mode 100644
index eef9a37..0000000
--- a/board/spear/spear600/spear600.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-#include <asm/arch/spr_nand.h>
-
-int board_init(void)
-{
- return spear_board_init(MACH_TYPE_SPEAR600);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-int board_nand_init(struct nand_chip *nand)
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-
- if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
- return spear_nand_init(nand);
-
- return -1;
-}
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index b147fb6..cea1e3b 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,10 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+spear300 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
+spear310 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
+spear320 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
+spear600 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
scb9328 arm arm920t - 2011-07-17 Konstantin Kletschke <kletschke@synertronixx.de>
sbc2410x arm arm920t - 2011-07-17
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
deleted file mode 100644
index 4e5bdea..0000000
--- a/include/configs/spear-common.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPEAR_COMMON_H
-#define _SPEAR_COMMON_H
-/*
- * Common configurations used for both spear3xx as well as spear6xx
- */
-
-/* USBD driver configuration */
-#define CONFIG_SPEARUDC
-#define CONFIG_USB_DEVICE
-#define CONFIG_USB_TTY
-
-#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
-#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
-
-#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
-
-/* I2C driver configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_SPEAR_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x02
-
-#define CONFIG_I2C_CHIPADDRESS 0x50
-
-/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ (1000)
-#define CONFIG_SYS_HZ_CLOCK (8300000)
-
-/* Flash configuration */
-#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI 1
-#else
-#define CONFIG_SPEARSMI 1
-#endif
-
-#if defined(CONFIG_SPEARSMI)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE (0xF8000000)
-#define CONFIG_SYS_CS1_FLASH_BASE (0xF9000000)
-#define CONFIG_SYS_FLASH_BANK_SIZE (0x01000000)
-#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_CS1_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
-
-#endif
-
-/*
- * Serial Configuration (PL011)
- * CONFIG_PL01x_PORTS is defined in specific files
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
- 57600, 115200 }
-
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* NAND FLASH Configuration */
-#define CONFIG_NAND_SPEAR 1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE 1
-
-/*
- * Command support defines
- */
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVES
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-/*
- * Default Environment Varible definitions
- */
-#if defined(CONFIG_SPEAR_USBTTY)
-#define CONFIG_BOOTDELAY -1
-#else
-#define CONFIG_BOOTDELAY 1
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * U-Boot Environment placing definitions.
- */
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-#ifdef CONFIG_SPEARSMI
-/*
- * Environment is in serial NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_ENV_SECT_SIZE 0x00010000
-#define CONFIG_FSMTDBLK "/dev/mtdblock8 "
-
-#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
-
-#elif defined(CONFIG_SPEAR_EMI)
-/*
- * Environment is in parallel NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN 0x00060000
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
-
-#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
- "0x4C0000; bootm 0x1600000"
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/*
- * Environment is in NAND
- */
-
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_RANGE 0x10000
-#define CONFIG_FSMTDBLK "/dev/mtdblock12 "
-
-#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
- "0x80000 0x4C0000; " \
- "bootm 0x1600000"
-#endif
-
-#define CONFIG_BOOTARGS_NFS "root=/dev/nfs ip=dhcp " \
- "console=ttyS0 init=/bin/sh"
-#define CONFIG_BOOTARGS "console=ttyS0 mem=128M " \
- "root="CONFIG_FSMTDBLK \
- "rootfstype=jffs2"
-
-#define CONFIG_ENV_SIZE 0x02000
-
-/* Miscellaneous configurable options */
-#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#define CONFIG_AUTOBOOT_PROMPT \
- "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
-
-#define CONFIG_SYS_MEMTEST_START 0x00800000
-#define CONFIG_SYS_MEMTEST_END 0x04000000
-#define CONFIG_SYS_MALLOC_LEN (1024*1024)
-#define CONFIG_IDENT_STRING "-SPEAr"
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "u-boot> "
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
-#define CONFIG_SYS_64BIT_VSPRINTF 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE (128*1024)
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024)
-#define CONFIG_STACKSIZE_FIQ (4*1024)
-#endif
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_1_MAXSIZE 0x40000000
-
-#endif
diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
deleted file mode 100644
index 37bdebb..0000000
--- a/include/configs/spear3xx.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#if defined(CONFIG_spear300)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR300 1
-#elif defined(CONFIG_spear310)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR310 1
-#elif defined(CONFIG_spear320)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR320 1
-#endif
-
-#include <configs/spear-common.h>
-
-/* Serial Configuration (PL011) */
-#define CONFIG_SYS_SERIAL0 0xD0000000
-
-#if defined(CONFIG_SPEAR300)
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
-
-#elif defined(CONFIG_SPEAR310)
-
-#if (CONFIG_CONS_INDEX)
-#undef CONFIG_PL011_CLOCK
-#define CONFIG_PL011_CLOCK (83 * 1000 * 1000)
-#endif
-
-#define CONFIG_SYS_SERIAL1 0xB2000000
-#define CONFIG_SYS_SERIAL2 0xB2080000
-#define CONFIG_SYS_SERIAL3 0xB2100000
-#define CONFIG_SYS_SERIAL4 0xB2180000
-#define CONFIG_SYS_SERIAL5 0xB2200000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1, \
- (void *)CONFIG_SYS_SERIAL2, \
- (void *)CONFIG_SYS_SERIAL3, \
- (void *)CONFIG_SYS_SERIAL4, \
- (void *)CONFIG_SYS_SERIAL5 }
-#elif defined(CONFIG_SPEAR320)
-
-#if (CONFIG_CONS_INDEX)
-#undef CONFIG_PL011_CLOCK
-#define CONFIG_PL011_CLOCK (83 * 1000 * 1000)
-#endif
-
-#define CONFIG_SYS_SERIAL1 0xA3000000
-#define CONFIG_SYS_SERIAL2 0xA4000000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1, \
- (void *)CONFIG_SYS_SERIAL2 }
-#endif
-
-#if defined(CONFIG_SPEAR_EMI)
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#if defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_FLASH_BASE 0x50000000
-#define CONFIG_SYS_CS1_FLASH_BASE 0x60000000
-#define CONFIG_SYS_CS2_FLASH_BASE 0x70000000
-#define CONFIG_SYS_CS3_FLASH_BASE 0x80000000
-#define CONFIG_SYS_CS4_FLASH_BASE 0x90000000
-#define CONFIG_SYS_CS5_FLASH_BASE 0xA0000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_CS1_FLASH_BASE, \
- CONFIG_SYS_CS2_FLASH_BASE, \
- CONFIG_SYS_CS3_FLASH_BASE, \
- CONFIG_SYS_CS4_FLASH_BASE, \
- CONFIG_SYS_CS5_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS 6
-
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_FLASH_BASE 0x44000000
-#define CONFIG_SYS_CS1_FLASH_BASE 0x45000000
-#define CONFIG_SYS_CS2_FLASH_BASE 0x46000000
-#define CONFIG_SYS_CS3_FLASH_BASE 0x47000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_CS1_FLASH_BASE, \
- CONFIG_SYS_CS2_FLASH_BASE, \
- CONFIG_SYS_CS3_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS 4
-
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_SECT (127 + 8)
-#define CONFIG_SYS_FLASH_QUIET_TEST 1
-
-#endif
-
-#if defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_NAND_BASE (0x80000000)
-
-#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_NAND_BASE (0x40000000)
-
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_NAND_BASE (0x50000000)
-
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx.h
deleted file mode 100644
index 2ad5beb..0000000
--- a/include/configs/spear6xx.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SPEAR600 1
-
-#include <configs/spear-common.h>
-
-/* Serial Configuration (PL011) */
-#define CONFIG_SYS_SERIAL0 0xD0000000
-#define CONFIG_SYS_SERIAL1 0xD0080000
-#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1 }
-
-#define CONFIG_SYS_NAND_BASE (0xD2000000)
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 35/52] ARM: remove broken "spearXXX" boards
2011-07-17 22:17 ` [U-Boot] [PATCH 35/52] ARM: remove broken "spearXXX" boards Wolfgang Denk
@ 2011-07-19 11:06 ` Vipin Kumar
0 siblings, 0 replies; 90+ messages in thread
From: Vipin Kumar @ 2011-07-19 11:06 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
There is a patch which was floated to make these boards compilable
We are infact planning to enhance this support also add more platforms
in near future
The reference to the relevant patch is below
http://lists.denx.de/pipermail/u-boot/2011-June/094300.html
Regards
Vipin
On Mon, Jul 18, 2011 at 3:47 AM, Wolfgang Denk <wd@denx.de> wrote:
> Remove spear300, spear310, spear320, and spear600 boards.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?7 -
> ?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 -
> ?board/spear/common/Makefile ? ? ? ? ? ?| ? 54 ------
> ?board/spear/common/spr_lowlevel_init.S | ?195 ---------------------
> ?board/spear/common/spr_misc.c ? ? ? ? ?| ?293 --------------------------------
> ?board/spear/spear300/Makefile ? ? ? ? ?| ? 51 ------
> ?board/spear/spear300/config.mk ? ? ? ? | ? 39 -----
> ?board/spear/spear300/spear300.c ? ? ? ?| ? 58 -------
> ?board/spear/spear310/Makefile ? ? ? ? ?| ? 51 ------
> ?board/spear/spear310/config.mk ? ? ? ? | ? 44 -----
> ?board/spear/spear310/spear310.c ? ? ? ?| ? 59 -------
> ?board/spear/spear320/Makefile ? ? ? ? ?| ? 51 ------
> ?board/spear/spear320/config.mk ? ? ? ? | ? 44 -----
> ?board/spear/spear320/spear320.c ? ? ? ?| ? 59 -------
> ?board/spear/spear600/Makefile ? ? ? ? ?| ? 51 ------
> ?board/spear/spear600/config.mk ? ? ? ? | ? 39 -----
> ?board/spear/spear600/spear600.c ? ? ? ?| ? 53 ------
> ?doc/README.scrapyard ? ? ? ? ? ? ? ? ? | ? ?4 +
> ?include/configs/spear-common.h ? ? ? ? | ?212 -----------------------
> ?include/configs/spear3xx.h ? ? ? ? ? ? | ?131 --------------
> ?include/configs/spear6xx.h ? ? ? ? ? ? | ? 43 -----
> ?21 files changed, 4 insertions(+), 1538 deletions(-)
> ?delete mode 100644 board/spear/common/Makefile
> ?delete mode 100644 board/spear/common/spr_lowlevel_init.S
> ?delete mode 100644 board/spear/common/spr_misc.c
> ?delete mode 100644 board/spear/spear300/Makefile
> ?delete mode 100644 board/spear/spear300/config.mk
> ?delete mode 100644 board/spear/spear300/spear300.c
> ?delete mode 100644 board/spear/spear310/Makefile
> ?delete mode 100644 board/spear/spear310/config.mk
> ?delete mode 100644 board/spear/spear310/spear310.c
> ?delete mode 100644 board/spear/spear320/Makefile
> ?delete mode 100644 board/spear/spear320/config.mk
> ?delete mode 100644 board/spear/spear320/spear320.c
> ?delete mode 100644 board/spear/spear600/Makefile
> ?delete mode 100644 board/spear/spear600/config.mk
> ?delete mode 100644 board/spear/spear600/spear600.c
> ?delete mode 100644 include/configs/spear-common.h
> ?delete mode 100644 include/configs/spear3xx.h
> ?delete mode 100644 include/configs/spear6xx.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 82281b0..3f63dc0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -699,13 +699,6 @@ Prakash Kumar <prakash@embedx.com>
>
> ? ? ? ?cerf250 ? ? ? ? xscale/pxa
>
> -Vipin Kumar <vipin.kumar@st.com>
> -
> - ? ? ? spear300 ? ? ? ?ARM926EJS (spear300 Soc)
> - ? ? ? spear310 ? ? ? ?ARM926EJS (spear310 Soc)
> - ? ? ? spear320 ? ? ? ?ARM926EJS (spear320 Soc)
> - ? ? ? spear600 ? ? ? ?ARM926EJS (spear600 Soc)
> -
> ?Sergey Lapin <slapin@ossfans.org>
>
> ? ? ? ?afeb9260 ? ? ? ?ARM926EJS (AT91SAM9260 SoC)
> diff --git a/MAKEALL b/MAKEALL
> index 788c5b6..8071fbd 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -329,10 +329,6 @@ LIST_ARM9=" ? ? ? ? ? ? ? ? ? ? ? ?\
> ? ? ? ?rd6281a ? ? ? ? ? ? ? ? \
> ? ? ? ?sheevaplug ? ? ? ? ? ? ?\
> ? ? ? ?smdk2410 ? ? ? ? ? ? ? ?\
> - ? ? ? spear300 ? ? ? ? ? ? ? ?\
> - ? ? ? spear310 ? ? ? ? ? ? ? ?\
> - ? ? ? spear320 ? ? ? ? ? ? ? ?\
> - ? ? ? spear600 ? ? ? ? ? ? ? ?\
> ? ? ? ?VCMA9 ? ? ? ? ? ? ? ? ? \
> ? ? ? ?versatile ? ? ? ? ? ? ? \
> ? ? ? ?versatileab ? ? ? ? ? ? \
> diff --git a/board/spear/common/Makefile b/board/spear/common/Makefile
> deleted file mode 100644
> index e0df6c1..0000000
> --- a/board/spear/common/Makefile
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -#
> -# (C) Copyright 2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -ifneq ($(OBJTREE),$(SRCTREE))
> -$(shell mkdir -p $(obj)board/$(VENDOR)/common)
> -endif
> -
> -LIB ? ?= $(obj)lib$(VENDOR).o
> -
> -COBJS ?:= spr_misc.o
> -SOBJS ?:= spr_lowlevel_init.o
> -
> -SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS ? := $(addprefix $(obj),$(COBJS))
> -SOBJS ?:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
> - ? ? ? $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - ? ? ? rm -f $(SOBJS) $(OBJS)
> -
> -distclean: ? ? clean
> - ? ? ? rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -# This is for $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/spear/common/spr_lowlevel_init.S b/board/spear/common/spr_lowlevel_init.S
> deleted file mode 100644
> index 6fbe579..0000000
> --- a/board/spear/common/spr_lowlevel_init.S
> +++ /dev/null
> @@ -1,195 +0,0 @@
> -/*
> - * (C) Copyright 2006
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <config.h>
> -
> -/*
> - * platform specific initializations are already done in Xloader
> - * Initializations already done include
> - * DDR, PLLs, IP's clock enable and reset release etc
> - */
> -.globl lowlevel_init
> -lowlevel_init:
> - ? ? ? /* By default, U-Boot switches CPU to low-vector */
> - ? ? ? /* Revert this as we work in high vector even in U-Boot */
> - ? ? ? mrc ? ? p15, 0, r0, c1, c0, 0
> - ? ? ? orr ? ? r0, r0, #0x00002000
> - ? ? ? mcr ? ? p15, 0, r0, c1, c0, 0
> - ? ? ? mov ? ? pc, lr
> -
> -/* void setfreq(unsigned int device, unsigned int frequency) */
> -.global setfreq
> -setfreq:
> - ? ? ? stmfd ? sp!,{r14}
> - ? ? ? stmfd ? sp!,{r0-r12}
> -
> - ? ? ? mov ? ? r8,sp
> - ? ? ? ldr ? ? sp,SRAM_STACK_V
> -
> - ? ? ? /* Saving the function arguements for later use */
> - ? ? ? mov ? ? r4,r0
> - ? ? ? mov ? ? r5,r1
> -
> - ? ? ? /* Putting DDR into self refresh */
> - ? ? ? ldr ? ? r0,DDR_07_V
> - ? ? ? ldr ? ? r1,[r0]
> - ? ? ? ldr ? ? r2,DDR_ACTIVE_V
> - ? ? ? bic ? ? r1, r1, r2
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r0,DDR_57_V
> - ? ? ? ldr ? ? r1,[r0]
> - ? ? ? ldr ? ? r2,CYCLES_MASK_V
> - ? ? ? bic ? ? r1, r1, r2
> - ? ? ? ldr ? ? r2,REFRESH_CYCLES_V
> - ? ? ? orr ? ? r1, r1, r2, lsl #16
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r0,DDR_07_V
> - ? ? ? ldr ? ? r1,[r0]
> - ? ? ? ldr ? ? r2,SREFRESH_MASK_V
> - ? ? ? orr ? ? r1, r1, r2
> - ? ? ? str ? ? r1,[r0]
> -
> - ? ? ? /* flush pipeline */
> - ? ? ? b ? ? ? flush
> - ? ? ? .align 5
> -flush:
> - ? ? ? /* Delay to ensure self refresh mode */
> - ? ? ? ldr ? ? r0,SREFRESH_DELAY_V
> -delay:
> - ? ? ? sub ? ? r0,r0,#1
> - ? ? ? cmp ? ? r0,#0
> - ? ? ? bne ? ? delay
> -
> - ? ? ? /* Putting system in slow mode */
> - ? ? ? ldr ? ? r0,SCCTRL_V
> - ? ? ? mov ? ? r1,#2
> - ? ? ? str ? ? r1,[r0]
> -
> - ? ? ? /* Changing PLL(1/2) frequency */
> - ? ? ? mov ? ? r0,r4
> - ? ? ? mov ? ? r1,r5
> -
> - ? ? ? cmp ? ? r4,#0
> - ? ? ? beq ? ? pll1_freq
> -
> - ? ? ? /* Change PLL2 (DDR frequency) */
> - ? ? ? ldr ? ? r6,PLL2_FREQ_V
> - ? ? ? ldr ? ? r7,PLL2_CNTL_V
> - ? ? ? b ? ? ? pll2_freq
> -
> -pll1_freq:
> - ? ? ? /* Change PLL1 (CPU frequency) */
> - ? ? ? ldr ? ? r6,PLL1_FREQ_V
> - ? ? ? ldr ? ? r7,PLL1_CNTL_V
> -
> -pll2_freq:
> - ? ? ? mov ? ? r0,r6
> - ? ? ? ldr ? ? r1,[r0]
> - ? ? ? ldr ? ? r2,PLLFREQ_MASK_V
> - ? ? ? bic ? ? r1,r1,r2
> - ? ? ? mov ? ? r2,r5,lsr#1
> - ? ? ? orr ? ? r1,r1,r2,lsl#24
> - ? ? ? str ? ? r1,[r0]
> -
> - ? ? ? mov ? ? r0,r7
> - ? ? ? ldr ? ? r1,P1C0A_V
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r1,P1C0E_V
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r1,P1C06_V
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r1,P1C0E_V
> - ? ? ? str ? ? r1,[r0]
> -
> -lock:
> - ? ? ? ldr ? ? r1,[r0]
> - ? ? ? and ? ? r1,r1,#1
> - ? ? ? cmp ? ? r1,#0
> - ? ? ? beq ? ? lock
> -
> - ? ? ? /* Putting system back to normal mode */
> - ? ? ? ldr ? ? r0,SCCTRL_V
> - ? ? ? mov ? ? r1,#4
> - ? ? ? str ? ? r1,[r0]
> -
> - ? ? ? /* Putting DDR back to normal */
> - ? ? ? ldr ? ? r0,DDR_07_V
> - ? ? ? ldr ? ? r1,[R0]
> - ? ? ? ldr ? ? r2,SREFRESH_MASK_V
> - ? ? ? bic ? ? r1, r1, r2
> - ? ? ? str ? ? r1,[r0]
> - ? ? ? ldr ? ? r2,DDR_ACTIVE_V
> - ? ? ? orr ? ? r1, r1, r2
> - ? ? ? str ? ? r1,[r0]
> -
> - ? ? ? /* Delay to ensure self refresh mode */
> - ? ? ? ldr ? ? r0,SREFRESH_DELAY_V
> -1:
> - ? ? ? sub ? ? r0,r0,#1
> - ? ? ? cmp ? ? r0,#0
> - ? ? ? bne ? ? 1b
> -
> - ? ? ? mov ? ? sp,r8
> - ? ? ? /* Resuming back to code */
> - ? ? ? ldmia ? sp!,{r0-r12}
> - ? ? ? ldmia ? sp!,{pc}
> -
> -SCCTRL_V:
> - ? ? ? .word 0xfca00000
> -PLL1_FREQ_V:
> - ? ? ? .word 0xfca8000C
> -PLL1_CNTL_V:
> - ? ? ? .word 0xfca80008
> -PLL2_FREQ_V:
> - ? ? ? .word 0xfca80018
> -PLL2_CNTL_V:
> - ? ? ? .word 0xfca80014
> -PLLFREQ_MASK_V:
> - ? ? ? .word 0xff000000
> -P1C0A_V:
> - ? ? ? .word 0x1C0A
> -P1C0E_V:
> - ? ? ? .word 0x1C0E
> -P1C06_V:
> - ? ? ? .word 0x1C06
> -
> -SREFRESH_DELAY_V:
> - ? ? ? .word 0x9999
> -SRAM_STACK_V:
> - ? ? ? .word 0xD2800600
> -DDR_07_V:
> - ? ? ? .word 0xfc60001c
> -DDR_ACTIVE_V:
> - ? ? ? .word 0x01000000
> -DDR_57_V:
> - ? ? ? .word 0xfc6000e4
> -CYCLES_MASK_V:
> - ? ? ? .word 0xffff0000
> -REFRESH_CYCLES_V:
> - ? ? ? .word 0xf0f0
> -SREFRESH_MASK_V:
> - ? ? ? .word 0x00010000
> -
> -.global setfreq_sz
> -setfreq_sz:
> - ? ? ? .word setfreq_sz - setfreq
> diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
> deleted file mode 100644
> index 0562222..0000000
> --- a/board/spear/common/spr_misc.c
> +++ /dev/null
> @@ -1,293 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <i2c.h>
> -#include <net.h>
> -#include <asm/io.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/spr_emi.h>
> -#include <asm/arch/spr_xloader_table.h>
> -#include <asm/arch/spr_defs.h>
> -
> -#define CPU ? ? ? ? ? ?0
> -#define DDR ? ? ? ? ? ?1
> -#define SRAM_REL ? ? ? 0xD2801000
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -static struct chip_data chip_data;
> -
> -int dram_init(void)
> -{
> - ? ? ? struct xloader_table *xloader_tb =
> - ? ? ? ? ? (struct xloader_table *)XLOADER_TABLE_ADDRESS;
> - ? ? ? struct xloader_table_1_1 *table_1_1;
> - ? ? ? struct xloader_table_1_2 *table_1_2;
> - ? ? ? struct chip_data *chip = &chip_data;
> -
> - ? ? ? gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - ? ? ? gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?PHYS_SDRAM_1_MAXSIZE);
> -
> - ? ? ? if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
> - ? ? ? ? ? ? ? table_1_1 = &xloader_tb->table.table_1_1;
> - ? ? ? ? ? ? ? chip->dramfreq = table_1_1->ddrfreq;
> - ? ? ? ? ? ? ? chip->dramtype = table_1_1->ddrtype;
> -
> - ? ? ? } else if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
> - ? ? ? ? ? ? ? table_1_2 = &xloader_tb->table.table_1_2;
> - ? ? ? ? ? ? ? chip->dramfreq = table_1_2->ddrfreq;
> - ? ? ? ? ? ? ? chip->dramtype = table_1_2->ddrtype;
> - ? ? ? } else {
> - ? ? ? ? ? ? ? chip->dramfreq = -1;
> - ? ? ? }
> -
> - ? ? ? return 0;
> -}
> -
> -int misc_init_r(void)
> -{
> -#if defined(CONFIG_CMD_NET)
> - ? ? ? uchar mac_id[6];
> -
> - ? ? ? if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
> - ? ? ? ? ? ? ? eth_setenv_enetaddr("ethaddr", mac_id);
> -#endif
> - ? ? ? setenv("verify", "n");
> -
> -#if defined(CONFIG_SPEAR_USBTTY)
> - ? ? ? setenv("stdin", "usbtty");
> - ? ? ? setenv("stdout", "usbtty");
> - ? ? ? setenv("stderr", "usbtty");
> -#endif
> - ? ? ? return 0;
> -}
> -
> -#ifdef CONFIG_SPEAR_EMI
> -struct cust_emi_para {
> - ? ? ? unsigned int tap;
> - ? ? ? unsigned int tsdp;
> - ? ? ? unsigned int tdpw;
> - ? ? ? unsigned int tdpr;
> - ? ? ? unsigned int tdcs;
> -};
> -
> -/* EMI timing setting of m28w640hc of linux kernel */
> -const struct cust_emi_para emi_timing_m28w640hc = {
> - ? ? ? .tap = 0x10,
> - ? ? ? .tsdp = 0x05,
> - ? ? ? .tdpw = 0x0a,
> - ? ? ? .tdpr = 0x0a,
> - ? ? ? .tdcs = 0x05,
> -};
> -
> -/* EMI timing setting of bootrom */
> -const struct cust_emi_para emi_timing_bootrom = {
> - ? ? ? .tap = 0xf,
> - ? ? ? .tsdp = 0x0,
> - ? ? ? .tdpw = 0xff,
> - ? ? ? .tdpr = 0x111,
> - ? ? ? .tdcs = 0x02,
> -};
> -
> -void spear_emi_init(void)
> -{
> - ? ? ? const struct cust_emi_para *p = &emi_timing_m28w640hc;
> - ? ? ? struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
> - ? ? ? unsigned int cs;
> - ? ? ? unsigned int val, tmp;
> -
> - ? ? ? val = readl(CONFIG_SPEAR_RASBASE);
> -
> - ? ? ? if (val & EMI_ACKMSK)
> - ? ? ? ? ? ? ? tmp = 0x3f;
> - ? ? ? else
> - ? ? ? ? ? ? ? tmp = 0x0;
> -
> - ? ? ? writel(tmp, &emi_regs_p->ack);
> -
> - ? ? ? for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
> - ? ? ? ? ? ? ? writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
> - ? ? ? ? ? ? ? writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
> - ? ? ? ? ? ? ? writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
> - ? ? ? ? ? ? ? writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
> - ? ? ? ? ? ? ? writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
> - ? ? ? ? ? ? ? writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
> - ? ? ? ? ? ? ? ? ? ? ?&emi_regs_p->bank_regs[cs].control);
> - ? ? ? }
> -}
> -#endif
> -
> -int spear_board_init(ulong mach_type)
> -{
> - ? ? ? struct xloader_table *xloader_tb =
> - ? ? ? ? ? (struct xloader_table *)XLOADER_TABLE_ADDRESS;
> - ? ? ? struct xloader_table_1_2 *table_1_2;
> - ? ? ? struct chip_data *chip = &chip_data;
> -
> - ? ? ? gd->bd->bi_arch_number = mach_type;
> -
> - ? ? ? /* adress of boot parameters */
> - ? ? ? gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
> -
> - ? ? ? /* CPU is initialized to work at 333MHz in Xloader */
> - ? ? ? chip->cpufreq = 333;
> -
> - ? ? ? if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
> - ? ? ? ? ? ? ? table_1_2 = &xloader_tb->table.table_1_2;
> - ? ? ? ? ? ? ? memcpy(chip->version, table_1_2->version,
> - ? ? ? ? ? ? ? ? ? ? ?sizeof(chip->version));
> - ? ? ? }
> -
> -#ifdef CONFIG_SPEAR_EMI
> - ? ? ? spear_emi_init();
> -#endif
> - ? ? ? return 0;
> -}
> -
> -static int i2c_read_mac(uchar *buffer)
> -{
> - ? ? ? u8 buf[2];
> -
> - ? ? ? i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
> -
> - ? ? ? /* Check if mac in i2c memory is valid */
> - ? ? ? if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
> - ? ? ? ? ? ? ? /* Valid mac address is saved in i2c eeprom */
> - ? ? ? ? ? ? ? i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
> - ? ? ? ? ? ? ? return 0;
> - ? ? ? }
> -
> - ? ? ? return -1;
> -}
> -
> -static int write_mac(uchar *mac)
> -{
> - ? ? ? u8 buf[2];
> -
> - ? ? ? buf[0] = (u8)MAGIC_BYTE0;
> - ? ? ? buf[1] = (u8)MAGIC_BYTE1;
> - ? ? ? i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
> -
> - ? ? ? buf[0] = (u8)~MAGIC_BYTE0;
> - ? ? ? buf[1] = (u8)~MAGIC_BYTE1;
> -
> - ? ? ? i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
> -
> - ? ? ? /* check if valid MAC address is saved in I2C EEPROM or not? */
> - ? ? ? if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
> - ? ? ? ? ? ? ? i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
> - ? ? ? ? ? ? ? puts("I2C EEPROM written with mac address \n");
> - ? ? ? ? ? ? ? return 0;
> - ? ? ? }
> -
> - ? ? ? puts("I2C EEPROM writing failed \n");
> - ? ? ? return -1;
> -}
> -
> -int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> -{
> - ? ? ? void (*sram_setfreq) (unsigned int, unsigned int);
> - ? ? ? struct chip_data *chip = &chip_data;
> - ? ? ? unsigned char mac[6];
> - ? ? ? unsigned int reg, frequency;
> - ? ? ? char *s, *e;
> - ? ? ? char i2c_mac[20];
> -
> - ? ? ? if ((argc > 3) || (argc < 2))
> - ? ? ? ? ? ? ? return cmd_usage(cmdtp);
> -
> - ? ? ? if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
> -
> - ? ? ? ? ? ? ? frequency = simple_strtoul(argv[2], NULL, 0);
> -
> - ? ? ? ? ? ? ? if (frequency > 333) {
> - ? ? ? ? ? ? ? ? ? ? ? printf("Frequency is limited to 333MHz\n");
> - ? ? ? ? ? ? ? ? ? ? ? return 1;
> - ? ? ? ? ? ? ? }
> -
> - ? ? ? ? ? ? ? sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
> -
> - ? ? ? ? ? ? ? if (!strcmp(argv[1], "cpufreq")) {
> - ? ? ? ? ? ? ? ? ? ? ? sram_setfreq(CPU, frequency);
> - ? ? ? ? ? ? ? ? ? ? ? printf("CPU frequency changed to %u\n", frequency);
> -
> - ? ? ? ? ? ? ? ? ? ? ? chip->cpufreq = frequency;
> - ? ? ? ? ? ? ? } else {
> - ? ? ? ? ? ? ? ? ? ? ? sram_setfreq(DDR, frequency);
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR frequency changed to %u\n", frequency);
> -
> - ? ? ? ? ? ? ? ? ? ? ? chip->dramfreq = frequency;
> - ? ? ? ? ? ? ? }
> -
> - ? ? ? ? ? ? ? return 0;
> - ? ? ? } else if (!strcmp(argv[1], "ethaddr")) {
> -
> - ? ? ? ? ? ? ? s = argv[2];
> - ? ? ? ? ? ? ? for (reg = 0; reg < 6; ++reg) {
> - ? ? ? ? ? ? ? ? ? ? ? mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
> - ? ? ? ? ? ? ? ? ? ? ? if (s)
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? s = (*e) ? e + 1 : e;
> - ? ? ? ? ? ? ? }
> - ? ? ? ? ? ? ? write_mac(mac);
> -
> - ? ? ? ? ? ? ? return 0;
> - ? ? ? } else if (!strcmp(argv[1], "print")) {
> -
> - ? ? ? ? ? ? ? if (chip->cpufreq == -1)
> - ? ? ? ? ? ? ? ? ? ? ? printf("CPU Freq ? ?= Not Known\n");
> - ? ? ? ? ? ? ? else
> - ? ? ? ? ? ? ? ? ? ? ? printf("CPU Freq ? ?= %d MHz\n", chip->cpufreq);
> -
> - ? ? ? ? ? ? ? if (chip->dramfreq == -1)
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR Freq ? ?= Not Known\n");
> - ? ? ? ? ? ? ? else
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR Freq ? ?= %d MHz\n", chip->dramfreq);
> -
> - ? ? ? ? ? ? ? if (chip->dramtype == DDRMOBILE)
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR Type ? ?= MOBILE\n");
> - ? ? ? ? ? ? ? else if (chip->dramtype == DDR2)
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR Type ? ?= DDR2\n");
> - ? ? ? ? ? ? ? else
> - ? ? ? ? ? ? ? ? ? ? ? printf("DDR Type ? ?= Not Known\n");
> -
> - ? ? ? ? ? ? ? if (!i2c_read_mac(mac)) {
> - ? ? ? ? ? ? ? ? ? ? ? sprintf(i2c_mac, "%pM", mac);
> - ? ? ? ? ? ? ? ? ? ? ? printf("Ethaddr (from i2c mem) = %s\n", i2c_mac);
> - ? ? ? ? ? ? ? } else {
> - ? ? ? ? ? ? ? ? ? ? ? printf("Ethaddr (from i2c mem) = Not set\n");
> - ? ? ? ? ? ? ? }
> -
> - ? ? ? ? ? ? ? printf("Xloader Rev = %s\n", chip->version);
> -
> - ? ? ? ? ? ? ? return 0;
> - ? ? ? }
> -
> - ? ? ? return cmd_usage(cmdtp);
> -}
> -
> -U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
> - ? ? ? ? ?"configure chip",
> - ? ? ? ? ?"chip_config cpufreq/ddrfreq frequency\n"
> - ? ? ? ? ?"chip_config print");
> diff --git a/board/spear/spear300/Makefile b/board/spear/spear300/Makefile
> deleted file mode 100644
> index b9b0fed..0000000
> --- a/board/spear/spear300/Makefile
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -#
> -# (C) Copyright 2000-2004
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB ? ?= $(obj)lib$(BOARD).o
> -
> -COBJS ?:= spear300.o
> -SOBJS ?:=
> -
> -SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS ? := $(addprefix $(obj),$(COBJS))
> -SOBJS ?:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
> - ? ? ? $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - ? ? ? rm -f $(SOBJS) $(OBJS)
> -
> -distclean: ? ? clean
> - ? ? ? rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/spear/spear300/config.mk b/board/spear/spear300/config.mk
> deleted file mode 100644
> index 11da2c3..0000000
> --- a/board/spear/spear300/config.mk
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -#
> -# (C) Copyright 2009
> -# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -#########################################################################
> -
> -CONFIG_SYS_TEXT_BASE = 0x00700000
> -
> -ALL += $(obj)u-boot.img
> -
> -# Environment variables in NAND
> -ifeq ($(ENV),NAND)
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
> -else
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
> -endif
> -
> -ifeq ($(CONSOLE),USB)
> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
> -endif
> diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
> deleted file mode 100644
> index 60ee544..0000000
> --- a/board/spear/spear300/spear300.c
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <nand.h>
> -#include <asm/io.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/spr_defs.h>
> -#include <asm/arch/spr_misc.h>
> -#include <asm/arch/spr_nand.h>
> -
> -int board_init(void)
> -{
> - ? ? ? return spear_board_init(MACH_TYPE_SPEAR300);
> -}
> -
> -/*
> - * board_nand_init - Board specific NAND initialization
> - * @nand: ? ? ?mtd private chip structure
> - *
> - * Called by nand_init_chip to initialize the board specific functions
> - */
> -
> -int board_nand_init(struct nand_chip *nand)
> -{
> - ? ? ? struct misc_regs *const misc_regs_p =
> - ? ? ? ? ? (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
> -
> - ? ? ? if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG30) ||
> - ? ? ? ? ? ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG31)) {
> -
> - ? ? ? ? ? ? ? return spear_nand_init(nand);
> - ? ? ? }
> -
> - ? ? ? return -1;
> -}
> diff --git a/board/spear/spear310/Makefile b/board/spear/spear310/Makefile
> deleted file mode 100644
> index 6dce093..0000000
> --- a/board/spear/spear310/Makefile
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -#
> -# (C) Copyright 2000-2004
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB ? ?= $(obj)lib$(BOARD).o
> -
> -COBJS ?:= spear310.o
> -SOBJS ?:=
> -
> -SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS ? := $(addprefix $(obj),$(COBJS))
> -SOBJS ?:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
> - ? ? ? $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - ? ? ? rm -f $(SOBJS) $(OBJS)
> -
> -distclean: ? ? clean
> - ? ? ? rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/spear/spear310/config.mk b/board/spear/spear310/config.mk
> deleted file mode 100644
> index 2b59c39..0000000
> --- a/board/spear/spear310/config.mk
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -#
> -# (C) Copyright 2009
> -# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -#########################################################################
> -
> -CONFIG_SYS_TEXT_BASE = 0x00700000
> -
> -ALL += $(obj)u-boot.img
> -
> -# Environment variables in NAND
> -ifeq ($(ENV),NAND)
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
> -else
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
> -endif
> -
> -# Support parallel flash
> -ifeq ($(FLASH),PNOR)
> -PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
> -endif
> -
> -ifeq ($(CONSOLE),USB)
> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
> -endif
> diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
> deleted file mode 100644
> index 03dfe16..0000000
> --- a/board/spear/spear310/spear310.c
> +++ /dev/null
> @@ -1,59 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Ryan Chen, ST Micoelectronics, ryan.chen at st.com.
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <nand.h>
> -#include <asm/io.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/spr_defs.h>
> -#include <asm/arch/spr_misc.h>
> -#include <asm/arch/spr_nand.h>
> -
> -int board_init(void)
> -{
> - ? ? ? return spear_board_init(MACH_TYPE_SPEAR310);
> -}
> -
> -/*
> - * board_nand_init - Board specific NAND initialization
> - * @nand: ? ? ?mtd private chip structure
> - *
> - * Called by nand_init_chip to initialize the board specific functions
> - */
> -
> -int board_nand_init(struct nand_chip *nand)
> -{
> - ? ? ? struct misc_regs *const misc_regs_p =
> - ? ? ? ? ? (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
> -
> - ? ? ? if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG30) ||
> - ? ? ? ? ? ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG31)) {
> -
> - ? ? ? ? ? ? ? return spear_nand_init(nand);
> - ? ? ? }
> -
> - ? ? ? return -1;
> -}
> diff --git a/board/spear/spear320/Makefile b/board/spear/spear320/Makefile
> deleted file mode 100644
> index f6bd7dd..0000000
> --- a/board/spear/spear320/Makefile
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -#
> -# (C) Copyright 2000-2004
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB ? ?= $(obj)lib$(BOARD).o
> -
> -COBJS ?:= spear320.o
> -SOBJS ?:=
> -
> -SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS ? := $(addprefix $(obj),$(COBJS))
> -SOBJS ?:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
> - ? ? ? $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - ? ? ? rm -f $(SOBJS) $(OBJS)
> -
> -distclean: ? ? clean
> - ? ? ? rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/spear/spear320/config.mk b/board/spear/spear320/config.mk
> deleted file mode 100644
> index 2b59c39..0000000
> --- a/board/spear/spear320/config.mk
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -#
> -# (C) Copyright 2009
> -# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -#########################################################################
> -
> -CONFIG_SYS_TEXT_BASE = 0x00700000
> -
> -ALL += $(obj)u-boot.img
> -
> -# Environment variables in NAND
> -ifeq ($(ENV),NAND)
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
> -else
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
> -endif
> -
> -# Support parallel flash
> -ifeq ($(FLASH),PNOR)
> -PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
> -endif
> -
> -ifeq ($(CONSOLE),USB)
> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
> -endif
> diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
> deleted file mode 100644
> index 2ba2dbb..0000000
> --- a/board/spear/spear320/spear320.c
> +++ /dev/null
> @@ -1,59 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Ryan Chen, ST Micoelectronics, ryan.chen at st.com.
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <nand.h>
> -#include <asm/io.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/spr_defs.h>
> -#include <asm/arch/spr_misc.h>
> -#include <asm/arch/spr_nand.h>
> -
> -int board_init(void)
> -{
> - ? ? ? return spear_board_init(MACH_TYPE_SPEAR320);
> -}
> -
> -/*
> - * board_nand_init - Board specific NAND initialization
> - * @nand: ? ? ?mtd private chip structure
> - *
> - * Called by nand_init_chip to initialize the board specific functions
> - */
> -
> -int board_nand_init(struct nand_chip *nand)
> -{
> - ? ? ? struct misc_regs *const misc_regs_p =
> - ? ? ? ? ? (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
> -
> - ? ? ? if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG30) ||
> - ? ? ? ? ? ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
> - ? ? ? ? ? ?MISC_SOCCFG31)) {
> -
> - ? ? ? ? ? ? ? return spear_nand_init(nand);
> - ? ? ? }
> -
> - ? ? ? return -1;
> -}
> diff --git a/board/spear/spear600/Makefile b/board/spear/spear600/Makefile
> deleted file mode 100644
> index 6b643bf..0000000
> --- a/board/spear/spear600/Makefile
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -#
> -# (C) Copyright 2000-2004
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB ? ?= $(obj)lib$(BOARD).o
> -
> -COBJS ?:= spear600.o
> -SOBJS ?:=
> -
> -SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS ? := $(addprefix $(obj),$(COBJS))
> -SOBJS ?:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
> - ? ? ? $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> -
> -clean:
> - ? ? ? rm -f $(SOBJS) $(OBJS)
> -
> -distclean: ? ? clean
> - ? ? ? rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/spear/spear600/config.mk b/board/spear/spear600/config.mk
> deleted file mode 100644
> index 11da2c3..0000000
> --- a/board/spear/spear600/config.mk
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -#
> -# (C) Copyright 2009
> -# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -#########################################################################
> -
> -CONFIG_SYS_TEXT_BASE = 0x00700000
> -
> -ALL += $(obj)u-boot.img
> -
> -# Environment variables in NAND
> -ifeq ($(ENV),NAND)
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
> -else
> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
> -endif
> -
> -ifeq ($(CONSOLE),USB)
> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
> -endif
> diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
> deleted file mode 100644
> index eef9a37..0000000
> --- a/board/spear/spear600/spear600.c
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <nand.h>
> -#include <asm/io.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/spr_defs.h>
> -#include <asm/arch/spr_misc.h>
> -#include <asm/arch/spr_nand.h>
> -
> -int board_init(void)
> -{
> - ? ? ? return spear_board_init(MACH_TYPE_SPEAR600);
> -}
> -
> -/*
> - * board_nand_init - Board specific NAND initialization
> - * @nand: ? ? ?mtd private chip structure
> - *
> - * Called by nand_init_chip to initialize the board specific functions
> - */
> -
> -int board_nand_init(struct nand_chip *nand)
> -{
> - ? ? ? struct misc_regs *const misc_regs_p =
> - ? ? ? ? ? (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
> -
> - ? ? ? if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
> - ? ? ? ? ? ? ? return spear_nand_init(nand);
> -
> - ? ? ? return -1;
> -}
> diff --git a/doc/README.scrapyard b/doc/README.scrapyard
> index b147fb6..cea1e3b 100644
> --- a/doc/README.scrapyard
> +++ b/doc/README.scrapyard
> @@ -11,6 +11,10 @@ easily if here is something they might want to dig for...
>
> ?Board ?Arch ? ?CPU ? ? removed ? ? Commit ? ? ?last known maintainer/contact
> ?=============================================================================
> +spear300 arm ? ARM926EJS - ? ? ? 2011-07-17 ? ?Vipin Kumar <vipin.kumar@st.com>
> +spear310 arm ? ARM926EJS - ? ? ? 2011-07-17 ? ?Vipin Kumar <vipin.kumar@st.com>
> +spear320 arm ? ARM926EJS - ? ? ? 2011-07-17 ? ?Vipin Kumar <vipin.kumar@st.com>
> +spear600 arm ? ARM926EJS - ? ? ? 2011-07-17 ? ?Vipin Kumar <vipin.kumar@st.com>
> ?smdk2400 arm ? arm920t - ? ? ? ? 2011-07-17 ? ?Gary Jennejohn <garyj@denx.de>
> ?scb9328 ? ? ? ?arm ? ? arm920t - ? ? ? ? 2011-07-17 ? ?Konstantin Kletschke <kletschke@synertronixx.de>
> ?sbc2410x arm ? arm920t - ? ? ? ? 2011-07-17
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> deleted file mode 100644
> index 4e5bdea..0000000
> --- a/include/configs/spear-common.h
> +++ /dev/null
> @@ -1,212 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef _SPEAR_COMMON_H
> -#define _SPEAR_COMMON_H
> -/*
> - * Common configurations used for both spear3xx as well as spear6xx
> - */
> -
> -/* USBD driver configuration */
> -#define CONFIG_SPEARUDC
> -#define CONFIG_USB_DEVICE
> -#define CONFIG_USB_TTY
> -
> -#define CONFIG_USBD_PRODUCT_NAME ? ? ? ? ? ? ? "SPEAr SoC"
> -#define CONFIG_USBD_MANUFACTURER ? ? ? ? ? ? ? "ST Microelectronics"
> -
> -#define CONFIG_EXTRA_ENV_USBTTY ? ? ? ? ? ? ? ? ? ? ? ?"usbtty=cdc_acm\0"
> -
> -/* I2C driver configuration */
> -#define CONFIG_HARD_I2C
> -#define CONFIG_SPEAR_I2C
> -#define CONFIG_SYS_I2C_SPEED ? ? ? ? ? ? ? ? ? 400000
> -#define CONFIG_SYS_I2C_SLAVE ? ? ? ? ? ? ? ? ? 0x02
> -
> -#define CONFIG_I2C_CHIPADDRESS ? ? ? ? ? ? ? ? 0x50
> -
> -/* Timer, HZ specific defines */
> -#define CONFIG_SYS_HZ ? ? ? ? ? ? ? ? ? ? ? ? ?(1000)
> -#define CONFIG_SYS_HZ_CLOCK ? ? ? ? ? ? ? ? ? ?(8300000)
> -
> -/* Flash configuration */
> -#if defined(CONFIG_FLASH_PNOR)
> -#define CONFIG_SPEAR_EMI ? ? ? ? ? ? ? ? ? ? ? 1
> -#else
> -#define CONFIG_SPEARSMI ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#endif
> -
> -#if defined(CONFIG_SPEARSMI)
> -
> -#define CONFIG_SYS_MAX_FLASH_BANKS ? ? ? ? ? ? 2
> -#define CONFIG_SYS_FLASH_BASE ? ? ? ? ? ? ? ? ?(0xF8000000)
> -#define CONFIG_SYS_CS1_FLASH_BASE ? ? ? ? ? ? ?(0xF9000000)
> -#define CONFIG_SYS_FLASH_BANK_SIZE ? ? ? ? ? ? (0x01000000)
> -#define CONFIG_SYS_FLASH_ADDR_BASE ? ? ? ? ? ? {CONFIG_SYS_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS1_FLASH_BASE}
> -#define CONFIG_SYS_MAX_FLASH_SECT ? ? ? ? ? ? ?128
> -
> -#define CONFIG_SYS_FLASH_EMPTY_INFO ? ? ? ? ? ?1
> -#define CONFIG_SYS_FLASH_ERASE_TOUT ? ? ? ? ? ?(3 * CONFIG_SYS_HZ)
> -#define CONFIG_SYS_FLASH_WRITE_TOUT ? ? ? ? ? ?(3 * CONFIG_SYS_HZ)
> -
> -#endif
> -
> -/*
> - * Serial Configuration (PL011)
> - * CONFIG_PL01x_PORTS is defined in specific files
> - */
> -#define CONFIG_PL011_SERIAL
> -#define CONFIG_PL011_CLOCK ? ? ? ? ? ? ? ? ? ? (48 * 1000 * 1000)
> -#define CONFIG_CONS_INDEX ? ? ? ? ? ? ? ? ? ? ?0
> -#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?115200
> -#define CONFIG_SYS_BAUDRATE_TABLE ? ? ? ? ? ? ?{ 9600, 19200, 38400, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 57600, 115200 }
> -
> -#define CONFIG_SYS_LOADS_BAUD_CHANGE
> -
> -/* NAND FLASH Configuration */
> -#define CONFIG_NAND_SPEAR ? ? ? ? ? ? ? ? ? ? ?1
> -#define CONFIG_SYS_MAX_NAND_DEVICE ? ? ? ? ? ? 1
> -#define CONFIG_MTD_NAND_VERIFY_WRITE ? ? ? ? ? 1
> -
> -/*
> - * Command support defines
> - */
> -#define CONFIG_CMD_I2C
> -#define CONFIG_CMD_NAND
> -#define CONFIG_CMD_ENV
> -#define CONFIG_CMD_MEMORY
> -#define CONFIG_CMD_RUN
> -#define CONFIG_CMD_SAVES
> -
> -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
> -#include <config_cmd_default.h>
> -#undef CONFIG_CMD_NET
> -#undef CONFIG_CMD_NFS
> -
> -/*
> - * Default Environment Varible definitions
> - */
> -#if defined(CONFIG_SPEAR_USBTTY)
> -#define CONFIG_BOOTDELAY ? ? ? ? ? ? ? ? ? ? ? -1
> -#else
> -#define CONFIG_BOOTDELAY ? ? ? ? ? ? ? ? ? ? ? 1
> -#endif
> -
> -#define CONFIG_ENV_OVERWRITE
> -
> -/*
> - * U-Boot Environment placing definitions.
> - */
> -#if defined(CONFIG_ENV_IS_IN_FLASH)
> -#ifdef CONFIG_SPEARSMI
> -/*
> - * Environment is in serial NOR flash
> - */
> -#define CONFIG_SYS_MONITOR_LEN ? ? ? ? ? ? ? ? 0x00040000
> -#define CONFIG_ENV_SECT_SIZE ? ? ? ? ? ? ? ? ? 0x00010000
> -#define CONFIG_FSMTDBLK ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"/dev/mtdblock8 "
> -
> -#define CONFIG_BOOTCOMMAND ? ? ? ? ? ? ? ? ? ? "bootm 0xf8050000"
> -
> -#elif defined(CONFIG_SPEAR_EMI)
> -/*
> - * Environment is in parallel NOR flash
> - */
> -#define CONFIG_SYS_MONITOR_LEN ? ? ? ? ? ? ? ? 0x00060000
> -#define CONFIG_ENV_SECT_SIZE ? ? ? ? ? ? ? ? ? 0x00020000
> -#define CONFIG_FSMTDBLK ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"/dev/mtdblock3 "
> -
> -#define CONFIG_BOOTCOMMAND ? ? ? ? ? ? ? ? ? ? "cp.b 0x50080000 0x1600000 " \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "0x4C0000; bootm 0x1600000"
> -#endif
> -
> -#define CONFIG_SYS_MONITOR_BASE ? ? ? ? ? ? ? ? ? ? ? ?CONFIG_SYS_FLASH_BASE
> -#define CONFIG_ENV_ADDR ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?(CONFIG_SYS_MONITOR_BASE + \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_MONITOR_LEN)
> -#elif defined(CONFIG_ENV_IS_IN_NAND)
> -/*
> - * Environment is in NAND
> - */
> -
> -#define CONFIG_ENV_OFFSET ? ? ? ? ? ? ? ? ? ? ?0x60000
> -#define CONFIG_ENV_RANGE ? ? ? ? ? ? ? ? ? ? ? 0x10000
> -#define CONFIG_FSMTDBLK ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"/dev/mtdblock12 "
> -
> -#define CONFIG_BOOTCOMMAND ? ? ? ? ? ? ? ? ? ? "nand read.jffs2 0x1600000 " \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "0x80000 0x4C0000; " \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "bootm 0x1600000"
> -#endif
> -
> -#define CONFIG_BOOTARGS_NFS ? ? ? ? ? ? ? ? ? ?"root=/dev/nfs ip=dhcp " \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "console=ttyS0 init=/bin/sh"
> -#define CONFIG_BOOTARGS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"console=ttyS0 mem=128M " ?\
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "root="CONFIG_FSMTDBLK \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "rootfstype=jffs2"
> -
> -#define CONFIG_ENV_SIZE ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x02000
> -
> -/* Miscellaneous configurable options */
> -#define CONFIG_BOOT_PARAMS_ADDR ? ? ? ? ? ? ? ? ? ? ? ?0x00000100
> -#define CONFIG_CMDLINE_TAG ? ? ? ? ? ? ? ? ? ? 1
> -#define CONFIG_SETUP_MEMORY_TAGS ? ? ? ? ? ? ? 1
> -#define CONFIG_MISC_INIT_R ? ? ? ? ? ? ? ? ? ? 1
> -#define CONFIG_ZERO_BOOTDELAY_CHECK ? ? ? ? ? ?1
> -#define CONFIG_AUTOBOOT_KEYED ? ? ? ? ? ? ? ? ?1
> -#define CONFIG_AUTOBOOT_STOP_STR ? ? ? ? ? ? ? " "
> -#define CONFIG_AUTOBOOT_PROMPT ? ? ? ? ? ? ? ? \
> - ? ? ? ? ? ? ? "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
> -
> -#define CONFIG_SYS_MEMTEST_START ? ? ? ? ? ? ? 0x00800000
> -#define CONFIG_SYS_MEMTEST_END ? ? ? ? ? ? ? ? 0x04000000
> -#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ? ? ? ? ?(1024*1024)
> -#define CONFIG_IDENT_STRING ? ? ? ? ? ? ? ? ? ?"-SPEAr"
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_SYS_PROMPT ? ? ? ? ? ? ? ? ? ? ?"u-boot> "
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_SYS_CBSIZE ? ? ? ? ? ? ? ? ? ? ?256
> -#define CONFIG_SYS_PBSIZE ? ? ? ? ? ? ? ? ? ? ?(CONFIG_SYS_CBSIZE + \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_MAXARGS ? ? ? ? ? ? ? ? ? ? 16
> -#define CONFIG_SYS_BARGSIZE ? ? ? ? ? ? ? ? ? ?CONFIG_SYS_CBSIZE
> -#define CONFIG_SYS_LOAD_ADDR ? ? ? ? ? ? ? ? ? 0x00800000
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET ? ? ? ? ?1
> -#define CONFIG_SYS_64BIT_VSPRINTF ? ? ? ? ? ? ?1
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS ? ? ? ? ? ? ?CONFIG_EXTRA_ENV_USBTTY
> -
> -/* Stack sizes */
> -#define CONFIG_STACKSIZE ? ? ? ? ? ? ? ? ? ? ? (128*1024)
> -
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ ? ? ? ? ? ? ? ? ? (4*1024)
> -#define CONFIG_STACKSIZE_FIQ ? ? ? ? ? ? ? ? ? (4*1024)
> -#endif
> -
> -/* Physical Memory Map */
> -#define CONFIG_NR_DRAM_BANKS ? ? ? ? ? ? ? ? ? 1
> -#define PHYS_SDRAM_1 ? ? ? ? ? ? ? ? ? ? ? ? ? 0x00000000
> -#define PHYS_SDRAM_1_MAXSIZE ? ? ? ? ? ? ? ? ? 0x40000000
> -
> -#endif
> diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
> deleted file mode 100644
> index 37bdebb..0000000
> --- a/include/configs/spear3xx.h
> +++ /dev/null
> @@ -1,131 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Configuration Options
> - * (easy to change)
> - */
> -#if defined(CONFIG_spear300)
> -#define CONFIG_SPEAR3XX ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#define CONFIG_SPEAR300 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#elif defined(CONFIG_spear310)
> -#define CONFIG_SPEAR3XX ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#define CONFIG_SPEAR310 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#elif defined(CONFIG_spear320)
> -#define CONFIG_SPEAR3XX ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#define CONFIG_SPEAR320 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -#endif
> -
> -#include <configs/spear-common.h>
> -
> -/* Serial Configuration (PL011) */
> -#define CONFIG_SYS_SERIAL0 ? ? ? ? ? ? ? ? ? ? 0xD0000000
> -
> -#if defined(CONFIG_SPEAR300)
> -#define CONFIG_PL01x_PORTS ? ? ? ? ? ? ? ? ? ? {(void *)CONFIG_SYS_SERIAL0}
> -
> -#elif defined(CONFIG_SPEAR310)
> -
> -#if (CONFIG_CONS_INDEX)
> -#undef ?CONFIG_PL011_CLOCK
> -#define CONFIG_PL011_CLOCK ? ? ? ? ? ? ? ? ? ? (83 * 1000 * 1000)
> -#endif
> -
> -#define CONFIG_SYS_SERIAL1 ? ? ? ? ? ? ? ? ? ? 0xB2000000
> -#define CONFIG_SYS_SERIAL2 ? ? ? ? ? ? ? ? ? ? 0xB2080000
> -#define CONFIG_SYS_SERIAL3 ? ? ? ? ? ? ? ? ? ? 0xB2100000
> -#define CONFIG_SYS_SERIAL4 ? ? ? ? ? ? ? ? ? ? 0xB2180000
> -#define CONFIG_SYS_SERIAL5 ? ? ? ? ? ? ? ? ? ? 0xB2200000
> -#define CONFIG_PL01x_PORTS ? ? ? ? ? ? ? ? ? ? {(void *)CONFIG_SYS_SERIAL0, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL1, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL2, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL3, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL4, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL5 }
> -#elif defined(CONFIG_SPEAR320)
> -
> -#if (CONFIG_CONS_INDEX)
> -#undef ?CONFIG_PL011_CLOCK
> -#define CONFIG_PL011_CLOCK ? ? ? ? ? ? ? ? ? ? (83 * 1000 * 1000)
> -#endif
> -
> -#define CONFIG_SYS_SERIAL1 ? ? ? ? ? ? ? ? ? ? 0xA3000000
> -#define CONFIG_SYS_SERIAL2 ? ? ? ? ? ? ? ? ? ? 0xA4000000
> -#define CONFIG_PL01x_PORTS ? ? ? ? ? ? ? ? ? ? {(void *)CONFIG_SYS_SERIAL0, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL1, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL2 }
> -#endif
> -
> -#if defined(CONFIG_SPEAR_EMI)
> -
> -#define CONFIG_SYS_FLASH_CFI
> -#define CONFIG_FLASH_CFI_DRIVER
> -
> -#if defined(CONFIG_SPEAR310)
> -#define CONFIG_SYS_FLASH_BASE ? ? ? ? ? ? ? ? ?0x50000000
> -#define CONFIG_SYS_CS1_FLASH_BASE ? ? ? ? ? ? ?0x60000000
> -#define CONFIG_SYS_CS2_FLASH_BASE ? ? ? ? ? ? ?0x70000000
> -#define CONFIG_SYS_CS3_FLASH_BASE ? ? ? ? ? ? ?0x80000000
> -#define CONFIG_SYS_CS4_FLASH_BASE ? ? ? ? ? ? ?0x90000000
> -#define CONFIG_SYS_CS5_FLASH_BASE ? ? ? ? ? ? ?0xA0000000
> -#define CONFIG_SYS_FLASH_BANKS_LIST ? ? ? ? ? ?{ CONFIG_SYS_FLASH_BASE, ? \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS1_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS2_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS3_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS4_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS5_FLASH_BASE }
> -#define CONFIG_SYS_MAX_FLASH_BANKS ? ? ? ? ? ? 6
> -
> -#elif defined(CONFIG_SPEAR320)
> -#define CONFIG_SYS_FLASH_BASE ? ? ? ? ? ? ? ? ?0x44000000
> -#define CONFIG_SYS_CS1_FLASH_BASE ? ? ? ? ? ? ?0x45000000
> -#define CONFIG_SYS_CS2_FLASH_BASE ? ? ? ? ? ? ?0x46000000
> -#define CONFIG_SYS_CS3_FLASH_BASE ? ? ? ? ? ? ?0x47000000
> -#define CONFIG_SYS_FLASH_BANKS_LIST ? ? ? ? ? ?{ CONFIG_SYS_FLASH_BASE, ? \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS1_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS2_FLASH_BASE, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CONFIG_SYS_CS3_FLASH_BASE }
> -#define CONFIG_SYS_MAX_FLASH_BANKS ? ? ? ? ? ? 4
> -
> -#endif
> -
> -#define CONFIG_SYS_MAX_FLASH_SECT ? ? ? ? ? ? ?(127 + 8)
> -#define CONFIG_SYS_FLASH_QUIET_TEST ? ? ? ? ? ?1
> -
> -#endif
> -
> -#if defined(CONFIG_SPEAR300)
> -#define CONFIG_SYS_NAND_BASE ? ? ? ? ? ? ? ? ? (0x80000000)
> -
> -#elif defined(CONFIG_SPEAR310)
> -#define CONFIG_SYS_NAND_BASE ? ? ? ? ? ? ? ? ? (0x40000000)
> -
> -#elif defined(CONFIG_SPEAR320)
> -#define CONFIG_SYS_NAND_BASE ? ? ? ? ? ? ? ? ? (0x50000000)
> -
> -#endif
> -
> -#endif ?/* __CONFIG_H */
> diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx.h
> deleted file mode 100644
> index 2ad5beb..0000000
> --- a/include/configs/spear6xx.h
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -/*
> - * (C) Copyright 2009
> - * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Configuration Options
> - * (easy to change)
> - */
> -#define CONFIG_SPEAR600 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1
> -
> -#include <configs/spear-common.h>
> -
> -/* Serial Configuration (PL011) */
> -#define CONFIG_SYS_SERIAL0 ? ? ? ? ? ? ? ? ? ? 0xD0000000
> -#define CONFIG_SYS_SERIAL1 ? ? ? ? ? ? ? ? ? ? 0xD0080000
> -#define CONFIG_PL01x_PORTS ? ? ? ? ? ? ? ? ? ? { (void *)CONFIG_SYS_SERIAL0, \
> - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (void *)CONFIG_SYS_SERIAL1 }
> -
> -#define CONFIG_SYS_NAND_BASE ? ? ? ? ? ? ? ? ? (0xD2000000)
> -
> -#endif ?/* __CONFIG_H */
> --
> 1.7.6
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards.
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (34 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 35/52] ARM: remove broken "spearXXX" boards Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-18 12:29 ` Stefano Babic
2011-07-17 22:17 ` [U-Boot] [PATCH 37/52] ARM: remove broken "voiceblue" board Wolfgang Denk
` (17 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 2 -
MAKEALL | 3 -
Makefile | 9 -
README | 2 +-
board/armltd/versatile/Makefile | 51 ------
board/armltd/versatile/config.mk | 5 -
board/armltd/versatile/lowlevel_init.S | 34 ----
board/armltd/versatile/split_by_variant.sh | 42 -----
board/armltd/versatile/versatile.c | 103 ------------
doc/README.scrapyard | 1 +
include/configs/versatile.h | 233 ----------------------------
11 files changed, 2 insertions(+), 483 deletions(-)
delete mode 100644 board/armltd/versatile/Makefile
delete mode 100644 board/armltd/versatile/config.mk
delete mode 100644 board/armltd/versatile/lowlevel_init.S
delete mode 100755 board/armltd/versatile/split_by_variant.sh
delete mode 100644 board/armltd/versatile/versatile.c
delete mode 100644 include/configs/versatile.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f63dc0..50f0a0a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -740,8 +740,6 @@ Sandeep Paulraj <s-paulraj@ti.com>
Peter Pearse <peter.pearse@arm.com>
integratorcp All current ARM supplied & supported core modules
-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
- versatile ARM926EJ-S
- versatile ARM926EJ-S
Dave Peverley <dpeverley@mpc-data.co.uk>
diff --git a/MAKEALL b/MAKEALL
index 8071fbd..979d3fe 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -330,9 +330,6 @@ LIST_ARM9=" \
sheevaplug \
smdk2410 \
VCMA9 \
- versatile \
- versatileab \
- versatilepb \
voiceblue \
davinci_dvevm \
davinci_schmoogie \
diff --git a/Makefile b/Makefile
index 314d9cf..43b86b1 100644
--- a/Makefile
+++ b/Makefile
@@ -959,15 +959,6 @@ tx25_config : unconfig
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
#########################################################################
-# ARM supplied Versatile development boards
-#########################################################################
-
-versatile_config \
-versatileab_config \
-versatilepb_config : unconfig
- @board/armltd/versatile/split_by_variant.sh $@
-
-#########################################################################
## XScale Systems
#########################################################################
diff --git a/README b/README
index 1e2d4d3..a5c1894 100644
--- a/README
+++ b/README
@@ -489,7 +489,7 @@ The following options need to be configured:
If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
define this to a list of base addresses for each (supported)
- port. See e.g. include/configs/versatile.h
+ port.
CONFIG_PL011_SERIAL_RLCR
diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile
deleted file mode 100644
index 3470328..0000000
--- a/board/armltd/versatile/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := versatile.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armltd/versatile/config.mk b/board/armltd/versatile/config.mk
deleted file mode 100644
index 8b57af1..0000000
--- a/board/armltd/versatile/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
diff --git a/board/armltd/versatile/lowlevel_init.S b/board/armltd/versatile/lowlevel_init.S
deleted file mode 100644
index bdfce2d..0000000
--- a/board/armltd/versatile/lowlevel_init.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-
- /* All done by Versatile's boot monitor! */
- mov pc, lr
diff --git a/board/armltd/versatile/split_by_variant.sh b/board/armltd/versatile/split_by_variant.sh
deleted file mode 100755
index 475e5a3..0000000
--- a/board/armltd/versatile/split_by_variant.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-# ---------------------------------------------------------
-# Set up the Versatile type define
-# ---------------------------------------------------------
-
-mkdir -p ${obj}include
-variant=PB926EJ-S
-if [ "$1" = "" ]
-then
- echo "$0:: No parameters - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- variant=PB926EJ-S
-else
- case "$1" in
- versatilepb_config | \
- versatile_config)
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- ;;
-
- versatileab_config)
- echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h
- variant=AB926EJ-S
- ;;
-
-
- *)
- echo "$0:: Unrecognised config - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- variant=PB926EJ-S
- ;;
-
- esac
-
-fi
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a versatile arm arm926ejs versatile armltd versatile
-echo "Variant:: $variant"
diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c
deleted file mode 100644
index 6e836dd..0000000
--- a/board/armltd/versatile/versatile.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /*
- * set clock frequency:
- * VERSATILE_REFCLK is 32KHz
- * VERSATILE_TIMCLK is 1MHz
- */
- *(volatile unsigned int *)(VERSATILE_SCTL_BASE) |=
- ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
-
- /* arch number of Versatile Board */
- gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- gd->flags = 0;
-
- icache_enable ();
-
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- setenv("verify", "n");
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index cea1e3b..6a6b7be 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
spear300 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
spear310 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
spear320 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
deleted file mode 100644
index db68965..0000000
--- a/include/configs/versatile.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- * Configuration for Versatile PB.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
-#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
-
-#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */
-#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ (1000000 / 256)
-#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */
-
-#define CONFIG_SYS_TIMER_INTERVAL 10000
-#define CONFIG_SYS_TIMER_RELOAD (CONFIG_SYS_TIMER_INTERVAL >> 4)
-#define CONFIG_SYS_TIMER_CTRL 0x84 /* Enable, Clock / 16 */
-
-/*
- * control registers
- */
-#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK 0
-#define VERSATILE_TIMCLK 1
-
-#define VERSATILE_TIMER1_EnSel 15
-#define VERSATILE_TIMER2_EnSel 17
-#define VERSATILE_TIMER3_EnSel 19
-#define VERSATILE_TIMER4_EnSel 21
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE 0x10010000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS \
- {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_CONS_INDEX 0
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_SERIAL0 0x101F1000
-#define CONFIG_SYS_SERIAL1 0x101F2000
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\
- "netdev=25,0,0xf1010000,0xf1010010,eth0"
-
-/*
- * Static configuration when assigning fixed address
- */
-#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Monitor Command Prompt */
-#ifdef CONFIG_ARCH_VERSATILE_AB
-# define CONFIG_SYS_PROMPT "VersatileAB # "
-#else
-# define CONFIG_SYS_PROMPT "VersatilePB # "
-#endif
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/*
- * Use the CFI flash driver for ease of use
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_ENV_IS_IN_FLASH 1
-/*
- * System control register
- */
-#define VERSATILE_SYS_BASE 0x10000000
-#define VERSATILE_SYS_FLASH_OFFSET 0x4C
-#define VERSATILE_FLASHCTRL \
- (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-/* Enable writing to flash */
-#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/*
- * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block
- * i.e.
- * the bottom "sector" (bottom boot), or top "sector"
- * (top boot), is a seperate erase region divided into
- * 4 (equal) smaller sectors. This, notionally, allows
- * quicker erase/rewrire of the most frequently changed
- * area......
- * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4
- */
-
-#ifdef CONFIG_ARCH_VERSATILE_AB
-#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE)
-#define CONFIG_SYS_MAX_FLASH_SECT (520)
-#endif
-
-#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
-#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT (260)
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0x34000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE)
-
-/* The ARM Boot Monitor is shipped in the lowest sector of flash */
-
-#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
-#define CONFIG_ENV_SIZE 8192
-#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards.
2011-07-17 22:17 ` [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards Wolfgang Denk
@ 2011-07-18 12:29 ` Stefano Babic
2011-07-18 12:34 ` Wolfgang Denk
0 siblings, 1 reply; 90+ messages in thread
From: Stefano Babic @ 2011-07-18 12:29 UTC (permalink / raw)
To: u-boot
On 07/18/2011 12:17 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> MAINTAINERS | 2 -
> MAKEALL | 3 -
> Makefile | 9 -
> README | 2 +-
> board/armltd/versatile/Makefile | 51 ------
> board/armltd/versatile/config.mk | 5 -
> board/armltd/versatile/lowlevel_init.S | 34 ----
> board/armltd/versatile/split_by_variant.sh | 42 -----
> board/armltd/versatile/versatile.c | 103 ------------
> doc/README.scrapyard | 1 +
> include/configs/versatile.h | 233 ----------------------------
> 11 files changed, 2 insertions(+), 483 deletions(-)
> delete mode 100644 board/armltd/versatile/Makefile
> delete mode 100644 board/armltd/versatile/config.mk
> delete mode 100644 board/armltd/versatile/lowlevel_init.S
> delete mode 100755 board/armltd/versatile/split_by_variant.sh
> delete mode 100644 board/armltd/versatile/versatile.c
> delete mode 100644 include/configs/versatile.h
>
Hi Wolfgang,
I sent patches to fix the versatile board, and tested for QEMU support:
http://patchwork.ozlabs.org/patch/101790/
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards.
2011-07-18 12:29 ` Stefano Babic
@ 2011-07-18 12:34 ` Wolfgang Denk
2011-07-18 12:47 ` Albert ARIBAUD
0 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 12:34 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4E24273C.7040204@denx.de> you wrote:
>
> I sent patches to fix the versatile board, and tested for QEMU support:
>
> http://patchwork.ozlabs.org/patch/101790/
But I don't see it in mainline, and the state of mainline at the end
of the merge window is my reference.
Albert, can you please try and expedite a pull request for the
outstanding / accpeted ARM patches and sub-pull-requestes (like
Stefano's imx stuff)? Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A memorandum is written not to inform the reader, but to protect the
writer. -- Dean Acheson
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards.
2011-07-18 12:34 ` Wolfgang Denk
@ 2011-07-18 12:47 ` Albert ARIBAUD
2011-07-18 13:19 ` Stefano Babic
0 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 12:47 UTC (permalink / raw)
To: u-boot
(removed my old e-mail address)
Hi Wolfgang,
Le 18/07/2011 14:34, Wolfgang Denk a ?crit :
> Dear Stefano Babic,
>
> In message<4E24273C.7040204@denx.de> you wrote:
>>
>> I sent patches to fix the versatile board, and tested for QEMU support:
>>
>> http://patchwork.ozlabs.org/patch/101790/
>
> But I don't see it in mainline, and the state of mainline at the end
> of the merge window is my reference.
>
> Albert, can you please try and expedite a pull request for the
> outstanding / accpeted ARM patches and sub-pull-requestes (like
> Stefano's imx stuff)? Thanks in advance.
As I said, the scb9328 bugfix commit was added to the IMX tree *after*
the last IMX pull request (which I applied), so I need a new IMX pull
request for the ARM tree to pull the new IX commits in; then only can I
send you a pull request of my own.
Stefano, can you send a pull request (make sure you rebase on
u-boot-arm/master first)?
> Best regards,
>
> Wolfgang Denk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards.
2011-07-18 12:47 ` Albert ARIBAUD
@ 2011-07-18 13:19 ` Stefano Babic
0 siblings, 0 replies; 90+ messages in thread
From: Stefano Babic @ 2011-07-18 13:19 UTC (permalink / raw)
To: u-boot
On 07/18/2011 02:47 PM, Albert ARIBAUD wrote:
> As I said, the scb9328 bugfix commit was added to the IMX tree *after*
> the last IMX pull request (which I applied), so I need a new IMX pull
> request for the ARM tree to pull the new IX commits in; then only can I
> send you a pull request of my own.
>
> Stefano, can you send a pull request (make sure you rebase on
> u-boot-arm/master first)?
Done.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 37/52] ARM: remove broken "voiceblue" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (35 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 36/52] ARM: remove broken "versatile" boards Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 38/52] ARM: remove broken "integratorcp" board Wolfgang Denk
` (16 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/voiceblue/Makefile | 74 -----------
board/voiceblue/config.mk | 1 -
board/voiceblue/eeprom.c | 218 ---------------------------------
board/voiceblue/setup.S | 280 -------------------------------------------
board/voiceblue/voiceblue.c | 80 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/voiceblue.h | 241 -------------------------------------
9 files changed, 1 insertions(+), 896 deletions(-)
delete mode 100644 board/voiceblue/Makefile
delete mode 100644 board/voiceblue/config.mk
delete mode 100644 board/voiceblue/eeprom.c
delete mode 100644 board/voiceblue/setup.S
delete mode 100644 board/voiceblue/voiceblue.c
delete mode 100644 include/configs/voiceblue.h
diff --git a/MAKEALL b/MAKEALL
index 979d3fe..1be76f1 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -330,7 +330,6 @@ LIST_ARM9=" \
sheevaplug \
smdk2410 \
VCMA9 \
- voiceblue \
davinci_dvevm \
davinci_schmoogie \
davinci_sffsdr \
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
deleted file mode 100644
index e16b195..0000000
--- a/board/voiceblue/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := voiceblue.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-clean:
- rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
- $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)eeprom.o $(obj)eeprom_start.o
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
deleted file mode 100644
index 412b57d..0000000
--- a/board/voiceblue/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
deleted file mode 100644
index aa6baca..0000000
--- a/board/voiceblue/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("VoiceBlue EEPROM writer\n"
- "Built: " U_BOOT_DATE "@" U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
deleted file mode 100644
index 6dddd6b..0000000
--- a/board/voiceblue/setup.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x00003031
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x12082480 @ FUNC_MUX_CTRL_5
- .word 0x0000001c @ FUNC_MUX_CTRL_6
- .word 0x00000003 @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02081248 @ FUNC_MUX_CTRL_A
- .word 0x00001248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x0000085f @ PULL_DWN_CTRL_1
- .word 0x01001000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
- ldrh r1, [r0, #0x18] @ get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0 @ set wait counter to 100 clock cycles
-
-icache_loop:
- cmp r2, #0x01
- streqh r1, [r0, #0x18]
- add r2, r2, #0x01
- cmp r2, #0x10
- bne icache_loop
- nop
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0, #0x00] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- @ max delayed ( 32 x CLKIN )
- strh r1, [r0, #0x0c]
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also enables onboard LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
deleted file mode 100644
index 5f8af2b..0000000
--- a/board/voiceblue/voiceblue.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
- /* arch number of VoiceBlue board */
- gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 7f54484..7312a70 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ cm4008 arm arm920t - -
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-voiceblue arm arm925t
omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 6a6b7be..792e122 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
spear300 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
spear310 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
deleted file mode 100644
index c258030..0000000
--- a/include/configs/voiceblue.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP VoiceBlue board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x0000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool and stack
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x08000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n"
-#define CONFIG_BOOTCOMMAND "run nboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "silent=1\0" \
- "ospart=0\0" \
- "bootfile=/boot/uImage\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate " \
- "mtdparts=$mtdparts\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart; setenv bootargs $bootargs " \
- "root=mtd:data$ospart ro " \
- "rootfstype=jffs2\0" \
- "initrdargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
- "mboot=bootp; run initrdargs; tftp; bootm\0" \
- "nboot=bootp; run nfsargs; tftp; bootm\0"
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-
-#if 1 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
- "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE))
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/*
- * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#define VOICEBLUE_LED_REG 0x04030000
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 38/52] ARM: remove broken "integratorcp" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (36 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 37/52] ARM: remove broken "voiceblue" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-08-12 13:06 ` Albert ARIBAUD
2011-07-17 22:17 ` [U-Boot] [PATCH 39/52] ARM: remove broken "tnetv107x_evm" board Wolfgang Denk
` (15 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 4 -
MAKEALL | 3 -
Makefile | 13 -
board/armltd/integrator/Makefile | 58 ----
board/armltd/integrator/config.mk | 5 -
board/armltd/integrator/integrator.c | 138 ----------
board/armltd/integrator/lowlevel_init.S | 213 --------------
board/armltd/integrator/pci.c | 396 ---------------------------
board/armltd/integrator/split_by_variant.sh | 220 ---------------
board/armltd/integrator/timer.c | 200 --------------
doc/README.scrapyard | 1 +
include/configs/integratorap.h | 289 -------------------
include/configs/integratorcp.h | 255 -----------------
13 files changed, 1 insertions(+), 1794 deletions(-)
delete mode 100644 board/armltd/integrator/Makefile
delete mode 100644 board/armltd/integrator/config.mk
delete mode 100644 board/armltd/integrator/integrator.c
delete mode 100644 board/armltd/integrator/lowlevel_init.S
delete mode 100644 board/armltd/integrator/pci.c
delete mode 100755 board/armltd/integrator/split_by_variant.sh
delete mode 100644 board/armltd/integrator/timer.c
delete mode 100644 include/configs/integratorap.h
delete mode 100644 include/configs/integratorcp.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 50f0a0a..776712a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -737,10 +737,6 @@ Sandeep Paulraj <s-paulraj@ti.com>
davinci_dm365evm ARM926EJS
davinci_dm6467evm ARM926EJS
-Peter Pearse <peter.pearse@arm.com>
- integratorcp All current ARM supplied & supported core modules
- -see http://www.arm.com/products/DevTools/Hardware_Platforms.html
-
Dave Peverley <dpeverley@mpc-data.co.uk>
omap730p2 ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index 1be76f1..997fd35 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -344,15 +344,12 @@ LIST_ARM9=" \
## ARM10 Systems
#########################################################################
LIST_ARM10=" \
- integratorcp \
- cp1026 \
"
#########################################################################
## ARM11 Systems
#########################################################################
LIST_ARM11=" \
- cp1136 \
omap2420h4 \
apollon \
imx31_litekit \
diff --git a/Makefile b/Makefile
index 43b86b1..af6ff87 100644
--- a/Makefile
+++ b/Makefile
@@ -892,19 +892,6 @@ TNY_A9260_config : unconfig
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
-########################################################################
-## ARM Integrator boards - see doc/README-integrator for more info.
-ap_config \
-ap922_config: unconfig
- @board/armltd/integrator/split_by_variant.sh ap $@
-
-integratorcp_config \
-cp_config \
-cp1136_config \
-cp922_config \
-cp1026_config: unconfig
- @board/armltd/integrator/split_by_variant.sh cp $@
-
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
diff --git a/board/armltd/integrator/Makefile b/board/armltd/integrator/Makefile
deleted file mode 100644
index c452631..0000000
--- a/board/armltd/integrator/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2004
-# ARM Ltd.
-# Philippe Robin, <philippe.robin@arm.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-SOBJS-y := lowlevel_init.o
-
-COBJS-y := integrator.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-y += timer.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-COBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS-y))
-
-$(LIB): $(obj).depend $(COBJS) $(SOBJS)
- $(call cmd_link_o_target, $(COBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(COBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armltd/integrator/config.mk b/board/armltd/integrator/config.mk
deleted file mode 100644
index 8b57af1..0000000
--- a/board/armltd/integrator/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
deleted file mode 100644
index 9bb56b5..0000000
--- a/board/armltd/integrator/integrator.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void peripheral_power_enable (void);
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of Integrator Board */
-#ifdef CONFIG_ARCH_CINTEGRATOR
- gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
-#else
- gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- gd->flags = 0;
-
-#ifdef CONFIG_CM_REMAP
-extern void cm_remap(void);
- cm_remap(); /* remaps writeable memory to 0x00000000 */
-#endif
-
- icache_enable ();
-
- return 0;
-}
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_PCI
- pci_init();
-#endif
- setenv("verify", "n");
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-#ifdef CONFIG_CM_SPD_DETECT
- {
-extern void dram_query(void);
- unsigned long cm_reg_sdram;
- unsigned long sdram_shift;
-
- dram_query(); /* Assembler accesses to CM registers */
- /* Queries the SPD values */
-
- /* Obtain the SDRAM size from the CM SDRAM register */
-
- cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
- /* Register SDRAM size
- *
- * 0xXXXXXXbbb000bb 16 MB
- * 0xXXXXXXbbb001bb 32 MB
- * 0xXXXXXXbbb010bb 64 MB
- * 0xXXXXXXbbb011bb 128 MB
- * 0xXXXXXXbbb100bb 256 MB
- *
- */
- sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
- gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
-
- }
-#endif /* CM_SPD_DETECT */
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- rc += pci_eth_init(bis);
- return rc;
-}
-#endif
diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S
deleted file mode 100644
index ab9589c..0000000
--- a/board/armltd/integrator/lowlevel_init.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
- /* Reset using CM control register */
-.global reset_cpu
-reset_cpu:
- mov r0, #CM_BASE
- ldr r1,[r0,#OS_CTRL]
- orr r1,r1,#CMMASK_RESET
- str r1,[r0,#OS_CTRL]
-
-reset_failed:
- b reset_failed
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
- /* If U-Boot has been run after the ARM boot monitor
- * then all the necessary actions have been done
- * otherwise we are running from user flash mapped to 0x00000000
- * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
- * Changes to the (possibly soft) reset defaults of the processor
- * itself should be performed in cpu/arm<>/start.S
- * This function affects only the core module or board settings
- */
-
-#ifdef CONFIG_CM_INIT
- /* CM has an initialization register
- * - bits in it are wired into test-chip pins to force
- * reset defaults
- * - may need to change its contents for U-Boot
- */
-
- /* set the desired CM specific value */
- mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
-
-#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
- orr r2,r2,#CMMASK_INIT_102
-#else
-
-#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
- !defined (CONFIG_CM940T)
-
-#ifdef CONFIG_CM_MULTIPLE_SSRAM
- /* set simple mapping */
- and r2,r2,#CMMASK_MAP_SIMPLE
-#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
-
-#ifdef CONFIG_CM_TCRAM
- /* disable TCRAM */
- and r2,r2,#CMMASK_TCRAM_DISABLE
-#endif /* #ifdef CONFIG_CM_TCRAM */
-
-#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
- defined (CONFIG_CM1136JF_S)
-
- and r2,r2,#CMMASK_LE
-
-#endif /* cpu with little endian initialization */
-
- orr r2,r2,#CMMASK_CMxx6_COMMON
-
-#endif /* CMxx6 code */
-
-#endif /* ARM102xxE value */
-
- /* read CM_INIT */
- mov r0, #CM_BASE
- ldr r1, [r0, #OS_INIT]
- /* check against desired bit setting */
- and r3,r1,r2
- cmp r3,r2
- beq init_reg_OK
-
- /* lock for change */
- mov r3, #CMVAL_LOCK1
- add r3,r3,#CMVAL_LOCK2
- str r3, [r0, #OS_LOCK]
- /* set desired value */
- orr r1,r1,r2
- /* write & relock CM_INIT */
- str r1, [r0, #OS_INIT]
- mov r1, #CMVAL_UNLOCK
- str r1, [r0, #OS_LOCK]
-
- /* soft reset so new values used */
- b reset_cpu
-
-init_reg_OK:
-
-#endif /* CONFIG_CM_INIT */
-
- mov pc, lr
-
-#ifdef CONFIG_CM_SPD_DETECT
- /* Fast memory is available for the DRAM data
- * - ensure it has been transferred, then summarize the data
- * into a CM register
- */
-.globl dram_query
-dram_query:
- stmfd r13!,{r4-r6,lr}
- /* set up SDRAM info */
- /* - based on example code from the CM User Guide */
- mov r0, #CM_BASE
-
-readspdbit:
- ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
- and r1, r1, #0x20 /* mask SPD bit (5) */
- cmp r1, #0x20 /* test if set */
- bne readspdbit
-
-setupsdram:
- add r0, r0, #OS_SPD /* address the copy of the SDP data */
- ldrb r1, [r0, #3] /* number of row address lines */
- ldrb r2, [r0, #4] /* number of column address lines */
- ldrb r3, [r0, #5] /* number of banks */
- ldrb r4, [r0, #31] /* module bank density */
- mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */
- mov r5, r5, ASL#2 /* size in MB */
- mov r0, #CM_BASE /* reload for later code */
- cmp r5, #0x10 /* is it 16MB? */
- bne not16
- mov r6, #0x2 /* store size and CAS latency of 2 */
- b writesize
-
-not16:
- cmp r5, #0x20 /* is it 32MB? */
- bne not32
- mov r6, #0x6
- b writesize
-
-not32:
- cmp r5, #0x40 /* is it 64MB? */
- bne not64
- mov r6, #0xa
- b writesize
-
-not64:
- cmp r5, #0x80 /* is it 128MB? */
- bne not128
- mov r6, #0xe
- b writesize
-
-not128:
- /* if it is none of these sizes then it is either 256MB, or
- * there is no SDRAM fitted so default to 256MB
- */
- mov r6, #0x12
-
-writesize:
- mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
- orr r2, r1, r2, ASL#12 /* OR in column address lines */
- orr r3, r2, r3, ASL#16 /* OR in number of banks */
- orr r6, r6, r3 /* OR in size and CAS latency */
- str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
-
-#endif /* #ifdef CONFIG_CM_SPD_DETECT */
-
- ldmfd r13!,{r4-r6,pc} /* back to caller */
-
-#ifdef CONFIG_CM_REMAP
- /* CM remap bit is operational
- * - use it to map writeable memory at 0x00000000, in place of flash
- */
-.globl cm_remap
-cm_remap:
- stmfd r13!,{r4-r10,lr}
-
- mov r0, #CM_BASE
- ldr r1, [r0, #OS_CTRL]
- orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
- str r1, [r0, #OS_CTRL]
-
- /* Now 0x00000000 is writeable, replace the vectors */
- ldr r0, =_start /* r0 <- start of vectors */
- ldr r2, =_armboot_start /* r2 <- past vectors */
- sub r1,r1,r1 /* destination 0x00000000 */
-
-copy_vec:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- ble copy_vec
-
- ldmfd r13!,{r4-r10,pc} /* back to caller */
-
-#endif /* #ifdef CONFIG_CM_REMAP */
diff --git a/board/armltd/integrator/pci.c b/board/armltd/integrator/pci.c
deleted file mode 100644
index 6ee2a85..0000000
--- a/board/armltd/integrator/pci.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_integrator_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { }
-};
-#endif /* CONFIG_PCI_PNP */
-
-/* V3 access routines */
-#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
-#define _V3Read16(o) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
-
-#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
-#define _V3Read32(o) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
-
-/* Compute address necessary to access PCI config space for the given */
-/* bus and device. */
-#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({ \
- unsigned int __address, __devicebit; \
- unsigned short __mapaddress; \
- unsigned int __dev = PCI_DEV (__devfn); /* FIXME to check!! (slot?) */ \
- \
- if (__bus == 0) { \
- /* local bus segment so need a type 0 config cycle */ \
- /* build the PCI configuration "address" with one-hot in A31-A11 */ \
- __address = PCI_CONFIG_BASE; \
- __address |= ((__devfn & 0x07) << 8); \
- __address |= __offset & 0xFF; \
- __mapaddress = 0x000A; /* 101=>config cycle, 0=>A1=A0=0 */ \
- __devicebit = (1 << (__dev + 11)); \
- \
- if ((__devicebit & 0xFF000000) != 0) { \
- /* high order bits are handled by the MAP register */ \
- __mapaddress |= (__devicebit >> 16); \
- } else { \
- /* low order bits handled directly in the address */ \
- __address |= __devicebit; \
- } \
- } else { /* bus !=0 */ \
- /* not the local bus segment so need a type 1 config cycle */ \
- /* A31-A24 are don't care (so clear to 0) */ \
- __mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \
- __address = PCI_CONFIG_BASE; \
- __address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \
- __address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \
- __address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number */ \
- __address |= __offset & 0xFF; /* bits 7..0 = register number */ \
- } \
- _V3Write16 (V3_LB_MAP1, __mapaddress); \
- __address; \
-})
-
-/* _V3OpenConfigWindow - open V3 configuration window */
-#define _V3OpenConfigWindow() { \
- /* Set up base0 to see all 512Mbytes of memory space (not */ \
- /* prefetchable), this frees up base1 for re-use by configuration*/ \
- /* memory */ \
- \
- _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
- 0x90 | V3_LB_BASE_M_ENABLE)); \
- /* Set up base1 to point into configuration space, note that MAP1 */ \
- /* register is set up by pciMakeConfigAddress(). */ \
- \
- _V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \
- 0x40 | V3_LB_BASE_M_ENABLE)); \
-}
-
-/* _V3CloseConfigWindow - close V3 configuration window */
-#define _V3CloseConfigWindow() { \
- /* Reassign base1 for use by prefetchable PCI memory */ \
- _V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \
- | 0x84 | V3_LB_BASE_M_ENABLE)); \
- _V3Write16 (V3_LB_MAP1, \
- (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006); \
- \
- /* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \
- \
- _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
- 0x80 | V3_LB_BASE_M_ENABLE)); \
-}
-
-static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
- int offset, unsigned char *val)
-{
- _V3OpenConfigWindow ();
- *val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset);
- _V3CloseConfigWindow ();
-
- return 0;
-}
-
-static int pci_integrator_read__word (struct pci_controller *hose,
- pci_dev_t dev, int offset,
- unsigned short *val)
-{
- _V3OpenConfigWindow ();
- *val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset);
- _V3CloseConfigWindow ();
-
- return 0;
-}
-
-static int pci_integrator_read_dword (struct pci_controller *hose,
- pci_dev_t dev, int offset,
- unsigned int *val)
-{
- _V3OpenConfigWindow ();
- *val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset);
- *val |= (*(volatile unsigned int *)
- PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
- (offset + 2))) << 16;
- _V3CloseConfigWindow ();
-
- return 0;
-}
-
-static int pci_integrator_write_byte (struct pci_controller *hose,
- pci_dev_t dev, int offset,
- unsigned char val)
-{
- _V3OpenConfigWindow ();
- *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset) = val;
- _V3CloseConfigWindow ();
-
- return 0;
-}
-
-static int pci_integrator_write_word (struct pci_controller *hose,
- pci_dev_t dev, int offset,
- unsigned short val)
-{
- _V3OpenConfigWindow ();
- *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset) = val;
- _V3CloseConfigWindow ();
-
- return 0;
-}
-
-static int pci_integrator_write_dword (struct pci_controller *hose,
- pci_dev_t dev, int offset,
- unsigned int val)
-{
- _V3OpenConfigWindow ();
- *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- offset) = (val & 0xFFFF);
- *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
- PCI_FUNC (dev),
- (offset + 2)) = ((val >> 16) & 0xFFFF);
- _V3CloseConfigWindow ();
-
- return 0;
-}
-/******************************
- * PCI initialisation
- ******************************/
-
-struct pci_controller integrator_hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_integrator_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
- volatile int i, j;
- struct pci_controller *hose = &integrator_hose;
-
- /* setting this register will take the V3 out of reset */
-
- *(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
-
- /* wait a few usecs to settle the device and the PCI bus */
-
- for (i = 0; i < 100; i++)
- j = i + 1;
-
- /* Now write the Base I/O Address Word to V3_BASE + 0x6C */
-
- *(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
- (unsigned short) (V3_BASE >> 16);
-
- do {
- *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
- *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
- 0x55;
- } while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
- || *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
- 4) != 0x55);
-
- /* Make sure that V3 register access is not locked, if it is, unlock it */
-
- if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
- V3_SYSTEM_M_LOCK)
- == V3_SYSTEM_M_LOCK)
- *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
-
- /* Ensure that the slave accesses from PCI are disabled while we */
- /* setup windows */
-
- *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
- ~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
-
- /* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
-
- *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
- ~V3_SYSTEM_M_RST_OUT;
-
- /* Make all accesses from PCI space retry until we're ready for them */
-
- *(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
- V3_PCI_CFG_M_RETRY_EN;
-
- /* Set up any V3 PCI Configuration Registers that we absolutely have to */
- /* LB_CFG controls Local Bus protocol. */
- /* Enable LocalBus byte strobes for READ accesses too. */
- /* set bit 7 BE_IMODE and bit 6 BE_OMODE */
-
- *(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
-
- /* PCI_CMD controls overall PCI operation. */
- /* Enable PCI bus master. */
-
- *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
-
- /* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
-
- *(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
- (INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
- V3_PCI_MAP_M_REG_EN |
- V3_PCI_MAP_M_ENABLE);
-
- /* PCI_BASE0 is the PCI address of the start of the window */
-
- *(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
- INTEGRATOR_BOOT_ROM_BASE;
-
- /* PCI_MAP1 is LOCAL address of the start of the window */
-
- *(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
- (INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
- V3_PCI_MAP_M_REG_EN |
- V3_PCI_MAP_M_ENABLE);
-
- /* PCI_BASE1 is the PCI address of the start of the window */
-
- *(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
- INTEGRATOR_HDR0_SDRAM_BASE;
-
- /* Set up the windows from local bus memory into PCI configuration, */
- /* I/O and Memory. */
- /* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
-
- *(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
- ((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
- *(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
-
- /* PCI Configuration, use LB_BASE1/LB_MAP1. */
-
- /* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
- /* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
- /* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
-
- *(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
- INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
-
- *(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
- ((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
-
- /* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
-
- *(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
- INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
-
- *(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
- (((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
-
- /* Allow accesses to PCI Configuration space */
- /* and set up A1, A0 for type 1 config cycles */
-
- *(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
- ((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
- ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
- V3_PCI_CFG_M_AD_LOW0;
-
- /* now we can allow in PCI MEMORY accesses */
-
- *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
- (*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
- V3_COMMAND_M_MEM_EN;
-
- /* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
- /* initialise and lock the V3 system register so that no one else */
- /* can play with it */
-
- *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
- (*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
- V3_SYSTEM_M_RST_OUT;
-
- *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
- (*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
- V3_SYSTEM_M_LOCK;
-
- /*
- * Register the hose
- */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
- pci_set_region (hose->regions + 0,
- 0x00000000, 0x40000000, 0x01000000,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI Memory - config space */
- pci_set_region (hose->regions + 1,
- 0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
-
- /* PCI V3 regs */
- pci_set_region (hose->regions + 2,
- 0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region (hose->regions + 3,
- 0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
-
- pci_set_ops (hose,
- pci_integrator_read_byte,
- pci_integrator_read__word,
- pci_integrator_read_dword,
- pci_integrator_write_byte,
- pci_integrator_write_word, pci_integrator_write_dword);
-
- hose->region_count = 4;
-
- pci_register_hose (hose);
-
- pciauto_config_init (hose);
- pciauto_config_device (hose, 0);
-
- hose->last_busno = pci_hose_scan (hose);
-}
diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
deleted file mode 100755
index 19fc832..0000000
--- a/board/armltd/integrator/split_by_variant.sh
+++ /dev/null
@@ -1,220 +0,0 @@
-#!/bin/sh
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integrator
-
-config_file=${obj}include/config.h
-
-if [ "$1" = "ap" ]
-then
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat > ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
-_EOF
-
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap7_config)
- cpu="arm_intcm"
- variant="unported core module CM7TDMI"
- ;;
-
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorap_config | \
- ap_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- ap720t_config)
- cpu="arm720t"
- echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
- >> ${config_file}
- variant="Core module CM720T"
- ;;
-
- ap922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- ap920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- ap926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
- ap946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-fi
-
-case "$cpu" in
- arm_intcm)
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-
- arm720t)
- cat >> ${config_file} << _EOF
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-esac
-
-else
-
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat >> ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP */
-_EOF
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorcp_config | \
- cp_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- cp922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- cp920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- cp926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
-
- cp946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- cp1136_config)
- cpu="arm1136"
- variant="Core module CM1136EJF-S"
- echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-_EOF
-fi
-
-fi # ap
-
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
-echo "Variant: $variant with core $cpu"
diff --git a/board/armltd/integrator/timer.c b/board/armltd/integrator/timer.c
deleted file mode 100644
index 7562ffa..0000000
--- a/board/armltd/integrator/timer.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <div64.h>
-
-#ifdef CONFIG_ARCH_CINTEGRATOR
-#define DIV_CLOCK_INIT 1
-#define TIMER_LOAD_VAL 0xFFFFFFFFL
-#else
-#define DIV_CLOCK_INIT 256
-#define TIMER_LOAD_VAL 0x0000FFFFL
-#endif
-/* The Integrator/CP timer1 is clocked at 1MHz
- * can be divided by 16 or 256
- * and can be set up as a 32-bit timer
- */
-/* U-Boot expects a 32 bit timer, running at CONFIG_SYS_HZ */
-/* Keep total timer count to avoid losing decrements < div_timer */
-static unsigned long long total_count = 0;
-static unsigned long long lastdec; /* Timer reading@last call */
-/* Divisor applied to timer clock */
-static unsigned long long div_clock = DIV_CLOCK_INIT;
-static unsigned long long div_timer = 1; /* Divisor to convert timer reading
- * change to U-Boot ticks
- */
-/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-static ulong timestamp; /* U-Boot ticks since startup */
-
-#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
-
-/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
- * - unless otherwise stated
- */
-
-/* starts up a counter
- * - the Integrator/CP timer can be set up to issue an interrupt */
-int timer_init (void)
-{
- /* Load timer with initial value */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
-#ifdef CONFIG_ARCH_CINTEGRATOR
- /* Set timer to be
- * enabled 1
- * periodic 1
- * no interrupts 0
- * X 0
- * divider 1 00 == less rounding error
- * 32 bit 1
- * wrapping 0
- */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
-#else
- /* Set timer to be
- * enabled 1
- * free-running 0
- * XX 00
- * divider 256 10
- * XX 00
- */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
-#endif
-
- /* init the timestamp */
- total_count = 0ULL;
- reset_timer_masked();
-
- div_timer = CONFIG_SYS_HZ_CLOCK;
- do_div(div_timer, CONFIG_SYS_HZ);
- do_div(div_timer, div_clock);
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base_ticks)
-{
- return get_timer_masked () - base_ticks;
-}
-
-void set_timer (ulong ticks)
-{
- timestamp = ticks;
- total_count = ticks * div_timer;
-}
-
-/* delay usec useconds */
-void __udelay (unsigned long usec)
-{
- ulong tmo, tmp;
-
- /* Convert to U-Boot ticks */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000000L);
-
- tmp = get_timer_masked(); /* get current timestamp */
- tmo += tmp; /* form target timestamp */
-
- while (get_timer_masked () < tmo) {/* loop till event */
- /*NOP*/;
- }
-}
-
-void reset_timer_masked (void)
-{
- /* capure current decrementer value */
- lastdec = READ_TIMER;
- /* start "advancing" time stamp from 0 */
- timestamp = 0L;
-}
-
-/* converts the timer reading to U-Boot ticks */
-/* the timestamp is the number of ticks since reset */
-ulong get_timer_masked (void)
-{
- /* get current count */
- unsigned long long now = READ_TIMER;
-
- if(now > lastdec) {
- /* Must have wrapped */
- total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
- } else {
- total_count += lastdec - now;
- }
- lastdec = now;
-
- /* Reuse "now" */
- now = total_count;
- do_div(now, div_timer);
- timestamp = now;
-
- return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
- udelay(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * Return the timebase clock frequency
- * i.e. how often the timer decrements
- */
-ulong get_tbclk (void)
-{
- unsigned long long tmp = CONFIG_SYS_HZ_CLOCK;
-
- do_div(tmp, div_clock);
-
- return tmp;
-}
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 792e122..d660814 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+integratorcp arm ? - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
spear300 arm ARM926EJS - 2011-07-17 Vipin Kumar <vipin.kumar@st.com>
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
deleted file mode 100644
index 32ff193..0000000
--- a/include/configs/integratorap.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- * Configuration for Integrator AP board.
- *.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_CM_INIT 1
-#define CONFIG_CM_REMAP 1
-#undef CONFIG_CM_SPD_DETECT
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * PL010 Configuration
- */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_SERIAL0 0x16000000
-#define CONFIG_SYS_SERIAL1 0x17000000
-
-/*#define CONFIG_NET_MULTI */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_MEMORY
-
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
-#define CONFIG_BOOTCOMMAND ""
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x24000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_ENV_SIZE 32768
-
-
-/*-----------------------------------------------------------------------
- * PCI definitions
- */
-
-#ifdef CONFIG_PCI /* pci support */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
-#define DEBUG
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
-#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
-
-/* PCI Base area */
-#define INTEGRATOR_PCI_BASE 0x40000000
-#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
-
-/* memory map as seen by the CPU on the local bus */
-#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
-#define CPU_PCI_IO_SIZE 0x10000
-
-#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
-#define CPU_PCI_CNFG_SIZE 0x1000000
-
-#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
-/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
-#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
-/* unused (128-16)M from B1000000-B7FFFFFF */
-#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
-/* unused ((128-16)M - 64K) from XXX */
-
-#define PCI_V3_BASE 0x62000000
-
-/* V3 PCI bridge controller */
-#define V3_BASE 0x62000000 /* V360EPC registers */
-
-#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
-#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
-
-
-#define V3_PCI_VENDOR 0x00000000
-#define V3_PCI_DEVICE 0x00000002
-#define V3_PCI_CMD 0x00000004
-#define V3_PCI_STAT 0x00000006
-#define V3_PCI_CC_REV 0x00000008
-#define V3_PCI_HDR_CF 0x0000000C
-#define V3_PCI_IO_BASE 0x00000010
-#define V3_PCI_BASE0 0x00000014
-#define V3_PCI_BASE1 0x00000018
-#define V3_PCI_SUB_VENDOR 0x0000002C
-#define V3_PCI_SUB_ID 0x0000002E
-#define V3_PCI_ROM 0x00000030
-#define V3_PCI_BPARAM 0x0000003C
-#define V3_PCI_MAP0 0x00000040
-#define V3_PCI_MAP1 0x00000044
-#define V3_PCI_INT_STAT 0x00000048
-#define V3_PCI_INT_CFG 0x0000004C
-#define V3_LB_BASE0 0x00000054
-#define V3_LB_BASE1 0x00000058
-#define V3_LB_MAP0 0x0000005E
-#define V3_LB_MAP1 0x00000062
-#define V3_LB_BASE2 0x00000064
-#define V3_LB_MAP2 0x00000066
-#define V3_LB_SIZE 0x00000068
-#define V3_LB_IO_BASE 0x0000006E
-#define V3_FIFO_CFG 0x00000070
-#define V3_FIFO_PRIORITY 0x00000072
-#define V3_FIFO_STAT 0x00000074
-#define V3_LB_ISTAT 0x00000076
-#define V3_LB_IMASK 0x00000077
-#define V3_SYSTEM 0x00000078
-#define V3_LB_CFG 0x0000007A
-#define V3_PCI_CFG 0x0000007C
-#define V3_DMA_PCI_ADR0 0x00000080
-#define V3_DMA_PCI_ADR1 0x00000090
-#define V3_DMA_LOCAL_ADR0 0x00000084
-#define V3_DMA_LOCAL_ADR1 0x00000094
-#define V3_DMA_LENGTH0 0x00000088
-#define V3_DMA_LENGTH1 0x00000098
-#define V3_DMA_CSR0 0x0000008B
-#define V3_DMA_CSR1 0x0000009B
-#define V3_DMA_CTLB_ADR0 0x0000008C
-#define V3_DMA_CTLB_ADR1 0x0000009C
-#define V3_DMA_DELAY 0x000000E0
-#define V3_MAIL_DATA 0x000000C0
-#define V3_PCI_MAIL_IEWR 0x000000D0
-#define V3_PCI_MAIL_IERD 0x000000D2
-#define V3_LB_MAIL_IEWR 0x000000D4
-#define V3_LB_MAIL_IERD 0x000000D6
-#define V3_MAIL_WR_STAT 0x000000D8
-#define V3_MAIL_RD_STAT 0x000000DA
-#define V3_QBA_MAP 0x000000DC
-
-/* SYSTEM register bits */
-#define V3_SYSTEM_M_RST_OUT (1 << 15)
-#define V3_SYSTEM_M_LOCK (1 << 14)
-
-/* PCI_CFG bits */
-#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
-
-/* PCI MAP register bits (PCI -> Local bus) */
-#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
-#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
-#define V3_PCI_MAP_M_REG_EN (1 << 1)
-#define V3_PCI_MAP_M_ENABLE (1 << 0)
-
-/* 9 => 512M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
-
-/* A => 1024M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
-
-/* LB_BASE register bits (Local bus -> PCI) */
-#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
-#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
-#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
-#define V3_LB_BASE_M_PREFETCH (1 << 3)
-#define V3_LB_BASE_M_ENABLE (1 << 0)
-
-/* PCI COMMAND REGISTER bits */
-#define V3_COMMAND_M_FBB_EN (1 << 9)
-#define V3_COMMAND_M_SERR_EN (1 << 8)
-#define V3_COMMAND_M_PAR_EN (1 << 6)
-#define V3_COMMAND_M_MASTER_EN (1 << 2)
-#define V3_COMMAND_M_MEM_EN (1 << 1)
-#define V3_COMMAND_M_IO_EN (1 << 0)
-
-#define INTEGRATOR_SC_BASE 0x11000000
-#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
-#define INTEGRATOR_SC_PCIENABLE \
- (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-
-#endif /* CONFIG_PCI */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. integratorcp_CM926EJ-S_config
- */
-#include "armcoremodule.h"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
deleted file mode 100644
index 2c8ca2d..0000000
--- a/include/configs/integratorcp.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- * Configuration for Compact Integrator board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE 0xC8000000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 14745600
-#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_SERIAL0 0x16000000
-#define CONFIG_SYS_SERIAL1 0x17000000
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#if 0
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
-
-Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
-
-*/
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
-
- * Top varies according to amount fitted
- * Reserve top 4 blocks of flash
- * - ARM Boot Monitor
- * - Unused
- * - SIB block
- * - U-Boot environment
- *
- * Base is always 0x24000000
-
- */
-#define CONFIG_SYS_FLASH_BASE 0x24000000
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_MAX_FLASH_SECT 64
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_MONITOR_LEN 0x00100000
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/*
- * Move up the U-Boot & monitor area if more flash is fitted.
- * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
- * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
- * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
- * embedded in the boot monitor(s) area
- */
-#if ( PHYS_FLASH_SIZE == 0x04000000 )
-
-#define CONFIG_ENV_ADDR 0x27F00000
-#define CONFIG_SYS_MONITOR_BASE 0x27F40000
-
-#elif (PHYS_FLASH_SIZE == 0x02000000 )
-
-#define CONFIG_ENV_ADDR 0x25F00000
-#define CONFIG_SYS_MONITOR_BASE 0x25F40000
-
-#else
-
-#define CONFIG_ENV_ADDR 0x24F00000
-#define CONFIG_SYS_MONITOR_BASE 0x27F40000
-
-#endif
-
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
-#define CONFIG_ENV_SIZE 8192 /* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE 0xCB000000 /* CP Registers*/
-#define OS_FLASHPROG 0x00000004 /* Flash register*/
-#define CPMASK_EXTRABANK 0x8
-#define CPMASK_FLASHSIZE 0x4
-#define CPMASK_FLWREN 0x2
-#define CPMASK_FLVPPEN 0x1
-
-/*
- * The ARM boot monitor initializes the board.
- * However, the default U-Boot code also performs the initialization.
- * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
- * - see documentation supplied with board for details of how to choose the
- * image to run at reset/power up
- * e.g. whether the ARM Boot Monitor runs before U-Boot
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
- */
-
-/*
- * The ARM boot monitor does not relocate U-Boot.
- * However, the default U-Boot code performs the relocation check,
- * and may relocate the code if the memory map is changed.
- * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
-
-#define SKIP_CONFIG_RELOCATE_UBOOT
-
- */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. cp_926ejs_config
- */
-
-#include "armcoremodule.h"
-
-/*
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
-#undef CONFIG_CM_INIT
- */
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 39/52] ARM: remove broken "tnetv107x_evm" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (37 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 38/52] ARM: remove broken "integratorcp" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 40/52] ARM: remove broken "at91cap9adk" board Wolfgang Denk
` (14 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Cyril Chemparathy <cyril@ti.com>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/ti/tnetv107xevm/Makefile | 49 ------------
board/ti/tnetv107xevm/config.mk | 20 -----
board/ti/tnetv107xevm/sdb_board.c | 149 ------------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/tnetv107x_evm.h | 151 -------------------------------------
8 files changed, 1 insertions(+), 375 deletions(-)
delete mode 100644 board/ti/tnetv107xevm/Makefile
delete mode 100644 board/ti/tnetv107xevm/config.mk
delete mode 100644 board/ti/tnetv107xevm/sdb_board.c
delete mode 100644 include/configs/tnetv107x_evm.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 776712a..2deb5ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -62,10 +62,6 @@ Oliver Brown <obrown@adventnetworks.com>
gw8260 MPC8260
-Cyril Chemparathy <cyril@ti.com>
-
- tnetv107x_evm tnetv107x
-
Conn Clark <clark@esteem.com>
ESTEEM192E MPC8xx
diff --git a/MAKEALL b/MAKEALL
index 997fd35..d43bcc5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -360,7 +360,6 @@ LIST_ARM11=" \
mx31pdk_nand \
qong \
smdk6400 \
- tnetv107x_evm \
"
#########################################################################
diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile
deleted file mode 100644
index 03238f0..0000000
--- a/board/ti/tnetv107xevm/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS += sdb_board.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-.PHONY: all
-
-all: $(LIB)
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak *~ .depend
-
-#########################################################################
-# This is for $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk
deleted file mode 100644
index 79b8304..0000000
--- a/board/ti/tnetv107xevm/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x83FC0000
diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c
deleted file mode 100644
index 3ed1cfd..0000000
--- a/board/ti/tnetv107xevm/sdb_board.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * TNETV107X-EVM: Board initialization
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <linux/mtd/nand.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/arch/nand_defs.h>
-#include <asm/arch/mux.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
- { /* CS0 */
- .mode = ASYNC_EMIF_MODE_NAND,
- .wr_setup = 5,
- .wr_strobe = 5,
- .wr_hold = 2,
- .rd_setup = 5,
- .rd_strobe = 5,
- .rd_hold = 2,
- .turn_around = 5,
- .width = ASYNC_EMIF_8,
- },
- { /* CS1 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 2,
- .wr_strobe = 27,
- .wr_hold = 4,
- .rd_setup = 2,
- .rd_strobe = 27,
- .rd_hold = 4,
- .turn_around = 2,
- .width = ASYNC_EMIF_PRESERVE,
- },
- { /* CS2 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 2,
- .wr_strobe = 27,
- .wr_hold = 4,
- .rd_setup = 2,
- .rd_strobe = 27,
- .rd_hold = 4,
- .turn_around = 2,
- .width = ASYNC_EMIF_PRESERVE,
- },
- { /* CS3 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 1,
- .wr_strobe = 90,
- .wr_hold = 3,
- .rd_setup = 1,
- .rd_strobe = 26,
- .rd_hold = 3,
- .turn_around = 1,
- .width = ASYNC_EMIF_8,
- },
-};
-
-static struct pll_init_data pll_config[] = {
- {
- .pll = ETH_PLL,
- .internal_osc = 1,
- .pll_freq = 500000000,
- .div_freq = {
- 5000000, 50000000, 125000000, 250000000, 25000000,
- },
- },
-};
-
-static const short sdio1_pins[] = {
- TNETV107X_PIN_SDIO1_CLK_1, TNETV107X_PIN_SDIO1_CMD_1,
- TNETV107X_PIN_SDIO1_DATA0_1, TNETV107X_PIN_SDIO1_DATA1_1,
- TNETV107X_PIN_SDIO1_DATA2_1, TNETV107X_PIN_SDIO1_DATA3_1,
- -1
-};
-
-static const short uart1_pins[] = {
- TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1
-};
-
-static const short ssp_pins[] = {
- TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2,
- TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2,
- TNETV107X_PIN_SSP1_3, -1
-};
-
-int board_init(void)
-{
-#ifndef CONFIG_USE_IRQ
- __raw_writel(0, INTC_GLB_EN); /* Global disable */
- __raw_writel(0, INTC_HINT_EN); /* Disable host ints */
- __raw_writel(0, INTC_EN_CLR0 + 0); /* Clear enable */
- __raw_writel(0, INTC_EN_CLR0 + 4); /* Clear enable */
- __raw_writel(0, INTC_EN_CLR0 + 8); /* Clear enable */
-#endif
-
- gd->bd->bi_arch_number = MACH_TYPE_TNETV107X;
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- init_plls(ARRAY_SIZE(pll_config), pll_config);
-
- init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
-
- mux_select_pin(TNETV107X_PIN_ASR_CS3);
- mux_select_pins(sdio1_pins);
- mux_select_pins(uart1_pins);
- mux_select_pins(ssp_pins);
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
- davinci_nand_init(nand);
-
- return 0;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 7312a70..cd7d4c2 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -40,7 +40,6 @@ mx31ads arm arm1136 - freesca
imx31_litekit arm arm1136 - logicpd mx31
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
-tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d660814..e51995c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+tnetv107x_evm arm arm1176 - 2011-07-17 Cyril Chemparathy <cyril@ti.com>
integratorcp arm ? - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
deleted file mode 100644
index 3627ce7..0000000
--- a/include/configs/tnetv107x_evm.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-
-/* Architecture, CPU, etc */
-#define CONFIG_ARM1176
-#define CONFIG_TNETV107X
-#define CONFIG_TNETV107X_EVM
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_DISABLE_TCM
-#define CONFIG_PERIPORT_REMAP
-#define CONFIG_PERIPORT_BASE 0x2000000
-#define CONFIG_PERIPORT_SIZE 0x10
-#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM)
-
-#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0)
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_PLL_SYS_EXT_FREQ 25000000
-#define CONFIG_PLL_TDM_EXT_FREQ 19200000
-#define CONFIG_PLL_ETH_EXT_FREQ 25000000
-
-/* Memory Info */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024)
-#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE
-#define PHYS_SDRAM_1_SIZE 0x04000000
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_STACKSIZE (256*1024)
-
-/* Serial Driver Info */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* Flash and environment info */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (SZ_128K)
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_1BIT_ECC
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_JFFS2_NAND
-#define NAND_MAX_CHIPS 1
-#define CONFIG_ENV_OFFSET 0x180000
-
-/*
- * davinci_nand is a bit of a misnomer since this particular EMIF block is
- * commonly used across multiple TI devices. Unfortunately, this misnomer
- * (amongst others) carries forward into the kernel too. Consequently, if we
- * use a different device name here, the mtdparts variable won't be usable as
- * a kernel command-line argument.
- */
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
- "1536k(uboot)ro," \
- "128k(params)ro," \
- "4m(kernel)," \
- "-(filesystem)"
-
-/* General U-Boot configuration */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_SYS_PROMPT "U-Boot > "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \
- 0x700000)
-#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \
- "root=/dev/mmcblk0p1 rw noinitrd"
-#define CONFIG_BOOTCOMMAND ""
-#define CONFIG_BOOTDELAY 1
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SOURCE
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 40/52] ARM: remove broken "at91cap9adk" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (38 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 39/52] ARM: remove broken "tnetv107x_evm" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board Wolfgang Denk
` (13 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
---
MAINTAINERS | 1 -
board/atmel/at91cap9adk/Makefile | 56 ------
board/atmel/at91cap9adk/at91cap9adk.c | 352 ---------------------------------
board/atmel/at91cap9adk/config.mk | 1 -
board/atmel/at91cap9adk/led.c | 43 ----
board/atmel/at91cap9adk/partition.c | 39 ----
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/at91cap9adk.h | 218 --------------------
9 files changed, 1 insertions(+), 711 deletions(-)
delete mode 100644 board/atmel/at91cap9adk/Makefile
delete mode 100644 board/atmel/at91cap9adk/at91cap9adk.c
delete mode 100644 board/atmel/at91cap9adk/config.mk
delete mode 100644 board/atmel/at91cap9adk/led.c
delete mode 100644 board/atmel/at91cap9adk/partition.c
delete mode 100644 include/configs/at91cap9adk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2deb5ce..b689699 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -743,7 +743,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
- at91cap9adk ARM926EJS (AT91CAP9 SoC)
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
deleted file mode 100644
index 2eec0ce..0000000
--- a/board/atmel/at91cap9adk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91cap9adk.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
deleted file mode 100644
index 2ab8bc2..0000000
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-#define MP_BLOCK_3_BASE 0xFDF00000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void at91cap9_slowclock_hw_init(void)
-{
- /*
- * On AT91CAP9 revC CPUs, the slow clock can be based on an
- * internal impreciseRC oscillator or an external 32kHz oscillator.
- * Switch to the latter.
- */
-#define ARCH_ID_AT91CAP9_REVB 0x399
-#define ARCH_ID_AT91CAP9_REVC 0x601
- if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
- unsigned i, tmp = at91_sys_read(AT91_SCKCR);
- if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
- timer_init();
- tmp |= AT91CAP9_SCKCR_OSC32EN;
- at91_sys_write(AT91_SCKCR, tmp);
- for (i = 0; i < 1200; i++)
- udelay(1000);
- tmp |= AT91CAP9_SCKCR_OSCSEL_32;
- at91_sys_write(AT91_SCKCR, tmp);
- udelay(200);
- tmp &= ~AT91CAP9_SCKCR_RCEN;
- at91_sys_write(AT91_SCKCR, tmp);
- }
- }
-}
-
-static void at91cap9_nor_hw_init(void)
-{
- unsigned long csa;
-
- /* Ensure EBI supply is 3.3V */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
- /* Configure SMC CS0 for parallel flash */
- at91_sys_write(AT91_SMC_SETUP(0),
- AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
- AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
- at91_sys_write(AT91_SMC_PULSE(0),
- AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
- AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
- at91_sys_write(AT91_SMC_CYCLE(0),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(0),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
- AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-}
-
-#ifdef CONFIG_CMD_NAND
-static void at91cap9_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
- AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(1));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
- /* RDY/BSY is not connected */
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91cap9_macb_hw_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PB22) => PHY normal mode (not Test mode)
- * ERX0 (PB25) => PHY ADDR0
- * ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- /* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
-
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
- /* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
- /* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0 << 8)) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
- at91_macb_hw_init();
-
- /* Unlock EMAC, 3 0 2 1 sequence */
-#define MP_MAC_KEY0 0x5969cb2a
-#define MP_MAC_KEY1 0xb4a1872e
-#define MP_MAC_KEY2 0x05683fbc
-#define MP_MAC_KEY3 0x3634fba4
-#define UNLOCK_MAC 0x00000008
- writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_USB_OHCI_NEW
-static void at91cap9_uhp_hw_init(void)
-{
- /* Unlock USB OHCI, 3 2 0 1 sequence */
-#define MP_OHCI_KEY0 0x896c11ca
-#define MP_OHCI_KEY1 0x68ebca21
-#define MP_OHCI_KEY2 0x4823efbc
-#define MP_OHCI_KEY3 0x8651aae4
-#define UNLOCK_OHCI 0x00000010
- writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91CAP9_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-static void at91cap9_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
-
- gd->fb_base = 0;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91CAP9ADK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
- at91cap9_slowclock_hw_init();
- at91cap9_nor_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91cap9_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
- at91cap9_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91cap9_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91cap9_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
diff --git a/board/atmel/at91cap9adk/config.mk b/board/atmel/at91cap9adk/config.mk
deleted file mode 100644
index 797da0e..0000000
--- a/board/atmel/at91cap9adk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73000000
diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c
deleted file mode 100644
index 14aea99..0000000
--- a/board/atmel/at91cap9adk/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
- at91_set_gpio_output(CONFIG_RED_LED, 0);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
deleted file mode 100644
index 7e1d46f..0000000
--- a/board/atmel/at91cap9adk/partition.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/boards.cfg b/boards.cfg
index cd7d4c2..bc90cf7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -59,7 +59,6 @@ smdk2410 arm arm920t - samsung
omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
-at91cap9adk arm arm926ejs - atmel at91
at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e51995c..98fd0fa 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
tnetv107x_evm arm arm1176 - 2011-07-17 Cyril Chemparathy <cyril@ti.com>
integratorcp arm ? - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
voiceblue arm arm925t - 2011-07-17
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
deleted file mode 100644
index 49c923f..0000000
--- a/include/configs/at91cap9adk.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91CAP9ADK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
-#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_BGR555 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x70000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x73e00000
-
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NORFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=physmap-flash.0:-(nor);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#else
-
-/* bootstrap + u-boot + env + linux in norflash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_SYS_MONITOR_BASE (PHYS_FLASH_1 + 0x8000)
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock4 " \
- "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
- "16k(env),224k(uboot)ro,-(linux);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (39 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 40/52] ARM: remove broken "at91cap9adk" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-19 11:51 ` Matthias Fuchs
2011-07-17 22:17 ` [U-Boot] [PATCH 42/52] ARM: remove broken "cmc_pu2" board Wolfgang Denk
` (12 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
---
MAINTAINERS | 1 -
board/esd/meesc/Makefile | 55 ---------
board/esd/meesc/config.mk | 1 -
board/esd/meesc/meesc.c | 283 -------------------------------------------
board/esd/meesc/partition.c | 37 ------
boards.cfg | 2 -
doc/README.scrapyard | 1 +
include/configs/meesc.h | 191 -----------------------------
8 files changed, 1 insertions(+), 570 deletions(-)
delete mode 100644 board/esd/meesc/Makefile
delete mode 100644 board/esd/meesc/config.mk
delete mode 100644 board/esd/meesc/meesc.c
delete mode 100644 board/esd/meesc/partition.c
delete mode 100644 include/configs/meesc.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b689699..9f36643 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -627,7 +627,6 @@ Fabio Estevam <fabio.estevam@freescale.com>
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- meesc ARM926EJS (AT91SAM9263 SoC)
otc570 ARM926EJS (AT91SAM9263 SoC)
Sedji Gaouaou<sedji.gaouaou@atmel.com>
diff --git a/board/esd/meesc/Makefile b/board/esd/meesc/Makefile
deleted file mode 100644
index b414479..0000000
--- a/board/esd/meesc/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/esd/meesc/config.mk b/board/esd/meesc/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/esd/meesc/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
deleted file mode 100644
index 41fa3e1..0000000
--- a/board/esd/meesc/meesc.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009-2010
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/io.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static int hw_rev = -1; /* hardware revision */
-
-int get_hw_rev(void)
-{
- if (hw_rev >= 0)
- return hw_rev;
-
- hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
- hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
- hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
- hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
-
- if (hw_rev == 15)
- hw_rev = 0;
-
- return hw_rev;
-}
-
-#ifdef CONFIG_CMD_NAND
-static void meesc_nand_hw_init(void)
-{
- unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
-
- /* Enable CS3 */
- csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
- writel(csa, &matrix->csa[0]);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
-
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
-
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
- AT91_SMC_MODE_DBW_8 |
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
-
- /* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif /* CONFIG_CMD_NAND */
-
-#ifdef CONFIG_MACB
-static void meesc_macb_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- /* Enable clock */
- writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
- at91_macb_hw_init();
-}
-#endif
-
-/*
- * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
- * controller debugging
- * The ET1100 is located at physical address 0x70000000
- * Its process memory is located at physical address 0x70001000
- */
-static void meesc_ethercat_hw_init(void)
-{
- at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE;
-
- /* Configure SMC EBI1_CS0 for EtherCAT */
- writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
- &smc1->cs[0].setup);
- writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
- AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
- &smc1->cs[0].pulse);
- writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
- &smc1->cs[0].cycle);
- /*
- * Configure behavior at external wait signal, byte-select mode, 16 bit
- * data bus width, none data float wait states and TDF optimization
- */
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
- AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
- AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
-
- /* Configure RDY/BSY */
- at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27));
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00);
-#endif
- return rc;
-}
-
-int checkboard(void)
-{
- char str[32];
- u_char hw_type; /* hardware type */
-
- /* read the "Type" register of the ET1100 controller */
- hw_type = readb(CONFIG_ET1100_BASE);
-
- switch (hw_type) {
- case 0x11:
- case 0x3F:
- /* ET1100 present, arch number of MEESC-Board */
- gd->bd->bi_arch_number = MACH_TYPE_MEESC;
- puts("Board: CAN-EtherCAT Gateway");
- break;
- case 0xFF:
- /* no ET1100 present, arch number of EtherCAN/2-Board */
- gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2;
- puts("Board: EtherCAN/2 Gateway");
- /* switch on LED1D */
- at91_set_pio_output(AT91_PIO_PORTB, 12, 1);
- break;
- default:
- /* assume, no ET1100 present, arch number of EtherCAN/2-Board */
- gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2;
- printf("ERROR! Read invalid hw_type: %02X\n", hw_type);
- puts("Board: EtherCAN/2 Gateway");
- break;
- }
- if (getenv_f("serial#", str, sizeof(str)) > 0) {
- puts(", serial# ");
- puts(str);
- }
- printf("\nHardware-revision: 1.%d\n", get_hw_rev());
- printf("Mach-type: %lu\n", gd->bd->bi_arch_number);
- return 0;
-}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
- char *str;
-
- char *serial = getenv("serial#");
- if (serial) {
- str = strchr(serial, '_');
- if (str && (strlen(str) >= 4)) {
- serialnr->high = (*(str + 1) << 8) | *(str + 2);
- serialnr->low = simple_strtoul(str + 3, NULL, 16);
- }
- } else {
- serialnr->high = 0;
- serialnr->low = 0;
- }
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
- return hw_rev | 0x100;
-}
-#endif
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
- char *str;
- char buf[32];
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- /*
- * Normally the processor clock has a divisor of 2.
- * In some cases this this needs to be set to 4.
- * Check the user has set environment mdiv to 4 to change the divisor.
- */
- if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) {
- writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) |
- AT91SAM9_PMC_MDIV_4, &pmc->mckr);
- at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
- serial_setbrg();
- /* Notify the user that the clock is not default */
- printf("Setting master clock to %s MHz\n",
- strmhz(buf, get_mck_clk_rate()));
- }
-
- return 0;
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-int board_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- /* Peripheral Clock Enable Register */
- writel(1 << AT91SAM9263_ID_PIOA |
- 1 << AT91SAM9263_ID_PIOB |
- 1 << AT91SAM9263_ID_PIOCDE |
- 1 << AT91SAM9263_ID_UHP,
- &pmc->pcer);
-
- /* initialize ET1100 Controller */
- meesc_ethercat_hw_init();
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
-#ifdef CONFIG_CMD_NAND
- meesc_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
- meesc_macb_hw_init();
-#endif
-#ifdef CONFIG_AT91_CAN
- at91_can_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91_uhp_hw_init();
-#endif
- return 0;
-}
diff --git a/board/esd/meesc/partition.c b/board/esd/meesc/partition.c
deleted file mode 100644
index df0e1db..0000000
--- a/board/esd/meesc/partition.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
-
-/* define the area offsets */
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
-};
diff --git a/boards.cfg b/boards.cfg
index bc90cf7..ea50658 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -80,8 +80,6 @@ cpu9G20_128M arm arm926ejs cpu9260 eukrea
cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT
top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000
top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000
-meesc arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_NANDFLASH
-meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH
otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH
otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH
pm9261 arm arm926ejs - ronetix at91
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 98fd0fa..0c2d94e 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+meesc arm arm926ejs - 2011-07-17 Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
tnetv107x_evm arm arm1176 - 2011-07-17 Cyril Chemparathy <cyril@ti.com>
integratorcp arm ? - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
deleted file mode 100644
index a27b36b..0000000
--- a/include/configs/meesc.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009-2010
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * Configuation settings for the esd MEESC board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Common stuff */
-#define CONFIG_MEESC 1 /* Board is esd MEESC */
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq */
-#define CONFIG_DISPLAY_BOARDINFO 1
-#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
-#define CONFIG_PREBOOT /* enable preboot variable */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MISC_INIT_R /* Call misc_init_r */
-
-#define CONFIG_ARCH_CPU_INIT
-
-/*
- * Hardware drivers
- */
-
-/* Console output */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* LED */
-#define CONFIG_AT91_LED 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash is not populated, disable it */
-#define CONFIG_SYS_NO_FLASH 1
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#undef CONFIG_RESET_PHY_R
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x21e00000
-
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NANDFLASH
-
-/* CAN */
-#define CONFIG_AT91_CAN 1
-
-/* hw-controller addresses */
-#define CONFIG_ET1100_BASE 0x70000000
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
- 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
- CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
- 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board
2011-07-17 22:17 ` [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board Wolfgang Denk
@ 2011-07-19 11:51 ` Matthias Fuchs
0 siblings, 0 replies; 90+ messages in thread
From: Matthias Fuchs @ 2011-07-19 11:51 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Daniel sent a patch to fix this issue in April
http://lists.denx.de/pipermail/u-boot/2011-April/090794.html.
Then Reinhard fixed some whitespace issues and applied it to
u-boot-atmel/next. But as we noticed just a minute ago, patching
failed somehow and most of the changes got lost.
I will resent the patch - rebased against top of git in just a minute.
Best regards,
Matthias
On 18.07.2011 00:17, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
> ---
> MAINTAINERS | 1 -
> board/esd/meesc/Makefile | 55 ---------
> board/esd/meesc/config.mk | 1 -
> board/esd/meesc/meesc.c | 283 -------------------------------------------
> board/esd/meesc/partition.c | 37 ------
> boards.cfg | 2 -
> doc/README.scrapyard | 1 +
> include/configs/meesc.h | 191 -----------------------------
> 8 files changed, 1 insertions(+), 570 deletions(-)
> delete mode 100644 board/esd/meesc/Makefile
> delete mode 100644 board/esd/meesc/config.mk
> delete mode 100644 board/esd/meesc/meesc.c
> delete mode 100644 board/esd/meesc/partition.c
> delete mode 100644 include/configs/meesc.h
>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 42/52] ARM: remove broken "cmc_pu2" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (40 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 43/52] ARM: remove broken "csb637" board Wolfgang Denk
` (11 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/cmc_pu2/Makefile | 50 ----
board/cmc_pu2/cmc_pu2.c | 192 --------------
board/cmc_pu2/config.mk | 3 -
board/cmc_pu2/flash.c | 468 -----------------------------------
board/cmc_pu2/load_sernum_ethaddr.c | 113 ---------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/cmc_pu2.h | 238 ------------------
8 files changed, 1 insertions(+), 1065 deletions(-)
delete mode 100644 board/cmc_pu2/Makefile
delete mode 100644 board/cmc_pu2/cmc_pu2.c
delete mode 100644 board/cmc_pu2/config.mk
delete mode 100644 board/cmc_pu2/flash.c
delete mode 100644 board/cmc_pu2/load_sernum_ethaddr.c
delete mode 100644 include/configs/cmc_pu2.h
diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile
deleted file mode 100644
index a60f2e9..0000000
--- a/board/cmc_pu2/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
deleted file mode 100644
index 0ac851c..0000000
--- a/board/cmc_pu2/cmc_pu2.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn
- * (2004) garyj at denx.de
- *
- * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mach-types.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-#define CMC_HP_BASIC 1
-#define CMC_PU2 2
-#define CMC_BASIC 4
-
-int hw_detect (void);
-
-int board_init (void)
-{
- AT91PS_PIO piob = AT91C_BASE_PIOB;
- AT91PS_PIO pioc = AT91C_BASE_PIOC;
-
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- /*
- * configure PC0-PC3 as input without pull ups, so RS485 driver enable
- * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated.
- */
- pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
-
- /*
- * On CMC-PU2 board configure PB3-PB6 to input without pull ups to
- * clear the duo LEDs (the external pull downs assure a proper
- * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and
- * drive it high, to configure current measurement on AINx.
- */
- if (hw_detect() & CMC_PU2) {
- piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) {
- piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
-
- /*
- * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in
- * the linuxarm kernel, yet.
- */
- /* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */
- gd->bd->bi_arch_number = 251;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-int checkboard (void)
-{
- if (hw_detect() & CMC_PU2)
- puts ("Board: CMC-PU2 (Rittal GmbH)\n");
- else if (hw_detect() & CMC_BASIC)
- puts ("Board: CMC-BASIC (Rittal GmbH)\n");
- else if (hw_detect() & CMC_HP_BASIC)
- puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n");
- else
- puts ("Board: unknown\n");
- return 0;
-}
-
-int hw_detect (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOB;
-
- /* PIOB clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-
- /* configure PB12 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB12;
- pio->PIO_PPUDR = AT91C_PIO_PB12;
- pio->PIO_PER = AT91C_PIO_PB12;
-
- /* configure PB13 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB13;
- pio->PIO_PPUDR = AT91C_PIO_PB13;
- pio->PIO_PER = AT91C_PIO_PB13;
-
- /* read board identification pin */
- if (pio->PIO_PDSR & AT91C_PIO_PB12)
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_PU2 : 0);
- else
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_HP_BASIC : CMC_BASIC);
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk
deleted file mode 100644
index cdb8a5f..0000000
--- a/board/cmc_pu2/config.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x20F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
deleted file mode 100644
index d832e62..0000000
--- a/board/cmc_pu2/flash.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause at tqs.de
- *
- * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn
- * garyj at denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02AA
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_short *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
- /* Init: no FLASHes known */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
-
- flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]);
-
- size = flash_info[0].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- vu_short *base = (vu_short *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = 0x00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = 0x00F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- info = NULL;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_S29GL064M:
- printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (vu_short *addr, flash_info_t *info)
-{
- int i;
- ushort value;
- ulong base = (ulong)addr;
-
- /* Write auto select command sequence */
- addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */
-
- /* read Manufacturer ID */
- udelay(100);
- value = addr[0];
- debug ("Manufacturer ID: %04X\n", value);
-
- switch (value) {
-
- case (AMD_MANUFACT & 0xFFFF):
- debug ("Manufacturer: AMD (Spansion)\n");
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (INTEL_MANUFACT & 0xFFFF):
- debug ("Manufacturer: Intel (not supported yet)\n");
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- printf ("Unknown Manufacturer ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- goto out;
- }
-
- value = addr[1];
- debug ("Device ID: %04X\n", value);
-
- switch (addr[1]) {
-
- case (AMD_ID_MIRROR & 0xFFFF):
- debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
- addr[14], addr[15]);
-
- switch(addr[14]) {
- case (AMD_ID_GL064M_2 & 0xFFFF):
- if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) {
- printf ("Chip: S29GLxxxM -> unknown\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- } else {
- debug ("Chip: S29GL064M-R6\n");
- info->flash_id += FLASH_S29GL064M;
- info->sector_count = 128;
- info->size = 0x00800000;
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x10000;
- }
- }
- break; /* => 16 MB */
- default:
- printf ("Chip: *** unknown ***\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
- break;
-
- default:
- printf ("Unknown Device ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
-out:
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_short *addr = (vu_short *)(info->start[0]);
- int flag, prot, sect, ssect, l_sect;
- ulong now, last;
-
- debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /*
- * Start erase on unprotected sectors.
- * Since the flash can erase multiple sectors with one command
- * we take advantage of that by doing the erase in chunks of
- * 3 sectors.
- */
- for (sect = s_first; sect <= s_last; ) {
- l_sect = -1;
-
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
- addr[FLASH_CYCLE1] = 0x0080;
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
-
- /* do the erase in chunks of@most 3 sectors */
- for (ssect = 0; ssect < 3; ssect++) {
- if ((sect + ssect) > s_last)
- break;
- if (info->protect[sect + ssect] == 0) { /* not protected */
- addr = (vu_short *)(info->start[sect + ssect]);
- addr[0] = 0x0030;
- l_sect = sect + ssect;
- }
- }
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- reset_timer_masked ();
- last = 0;
- addr = (vu_short *)(info->start[l_sect]);
- while ((addr[0] & 0x0080) != 0x0080) {
- if ((now = get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
- sect += ssect;
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
-DONE:
- /* reset to read mode */
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((vu_short *)src);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return (ERR_OK);
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- }
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
-{
- int flag;
- vu_short *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (vu_short *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = 0x00AA; /* unlock */
- base[FLASH_CYCLE2] = 0x0055; /* unlock */
- base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- reset_timer_masked ();
-
- /* data polling for D7 */
- while ((*dest & 0x0080) != (data & 0x0080)) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = 0x00F0; /* reset bank */
- return (1);
- }
- }
- return (0);
-}
diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c
deleted file mode 100644
index 6f85dd9..0000000
--- a/board/cmc_pu2/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause at tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <net.h>
-
-#define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */
-#define I2C_ALEN 1 /* length of EEPROM addresses in bytes */
-#define I2C_OFFSET 0x0 /* start address of manufacturere data block
- * in EEPROM */
-
-/* 64 Byte manufacturer data block in EEPROM */
-struct manufacturer_data {
- unsigned int serial_number; /* serial number (0...999999) */
- unsigned short hardware; /* hardware version (e.g. V1.02) */
- unsigned short manuf_date; /* manufacture date (e.g. 25/02) */
- unsigned char name[20]; /* device name (in CHIP.INI) */
- unsigned char macadr[6]; /* MAC address */
- signed char a_kal[4]; /* calibration value for U */
- signed char i_kal[4]; /* calibration value for I */
- unsigned char reserve[18]; /* reserved */
- unsigned short save_nr; /* save count */
- unsigned short chksum; /* checksum */
-};
-
-
-int i2c_read (unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len);
-
-/*-----------------------------------------------------------------------
- * Process manufacturer data block in EEPROM:
- *
- * If we boot on a system fresh from factory, check if the manufacturer data
- * in the EEPROM is valid and save some information it contains.
- *
- * CMC manufacturer data is defined as follows:
- *
- * - located in the onboard EEPROM
- * - starts at offset 0x0
- * - size 0x00000040
- *
- * Internal structure: see struct definition
- */
-
-int misc_init_r(void)
-{
- struct manufacturer_data data;
- char serial [9];
- unsigned short chksum;
- unsigned char *p;
- unsigned short i;
-
-#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C)
-#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C)
-#endif
- if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data,
- sizeof(data)) != 0) {
- puts ("Error reading manufacturer data from EEPROM\n");
- return -1;
- }
-
- /* check if manufacturer data block is valid */
- p = (unsigned char *)&data;
- chksum = 0;
- for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++)
- chksum += *p++;
-
- debug ("checksum of manufacturer data block: %#.4x\n", chksum);
-
- if (chksum != data.chksum) {
- puts ("Error: manufacturer data block has invalid checksum\n");
- return -1;
- }
-
- /* copy serial number */
- sprintf (serial, "%d", data.serial_number);
-
- /* set serial# and ethaddr if not yet defined */
- if (getenv("serial#") == NULL) {
- setenv ("serial#", serial);
- }
-
- if (getenv("ethaddr") == NULL) {
- eth_setenv_enetaddr("ethaddr", data.macadr);
- }
-
- return 0;
-}
diff --git a/boards.cfg b/boards.cfg
index ea50658..87e014c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-cmc_pu2 arm arm920t - - at91rm9200
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 0c2d94e..1d3141a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cmc_pu2 arm arm920t - 2011-07-17
meesc arm arm926ejs - 2011-07-17 Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
tnetv107x_evm arm arm1176 - 2011-07-17 Cyril Chemparathy <cyril@ti.com>
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
deleted file mode 100644
index a197635..0000000
--- a/include/configs/cmc_pu2.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Configuration settings for the CMC PU2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#undef CONFIG_DBGU
-#define CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 0 /* not used */
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#else
-#define CONFIG_TIMESTAMP
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-#if defined(CONFIG_HARD_I2C)
- #define CONFIG_CMD_DATE
- #define CONFIG_CMD_EEPROM
- #define CONFIG_CMD_I2C
-#endif
-
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
-#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
-#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
- "addmtd;bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
- "addcons addmtd; bootm\0" \
- "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
- "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
- "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}::off\0" \
- "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
- "64k(environment),768k(linux),4096k(root),-\0" \
- "load=tftp ${loadaddr} ${loadfile}\0" \
- "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
- "cp.b ${loadaddr} 10000000 ${filesize};" \
- "protect on 10000000 1001ffff\0" \
- "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
- "cp.b ${loadaddr} 10030000 ${filesize}\0" \
- "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
- "cp.b ${loadaddr} 100f0000 ${filesize}\0" \
- "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
- "cp.b ${loadaddr} 104f0000 ${filesize}\0" \
- "cramfsimage=cramfs_cmc-pu2.img\0" \
- "jffsimage=jffs2_cmc-pu2.img\0" \
- "loadfile=u-boot_cmc-pu2.bin\0" \
- "bootfile=uImage_cmc-pu2\0" \
- "loadaddr=0x20800000\0" \
- "hostname=CMC-TC-PU2\0" \
- "bootcmd=run dhcp_start;run flash_cramfs\0" \
- "autoload=n\0" \
- "dhcp_start=echo no DHCP\0" \
- "ipaddr=192.168.0.190\0"
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 43/52] ARM: remove broken "csb637" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (41 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 42/52] ARM: remove broken "cmc_pu2" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 44/52] ARM: remove broken "kb9202" board Wolfgang Denk
` (10 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/csb637/Makefile | 50 ------------
board/csb637/config.mk | 1 -
board/csb637/csb637.c | 94 ----------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/csb637.h | 196 ----------------------------------------------
6 files changed, 1 insertions(+), 342 deletions(-)
delete mode 100644 board/csb637/Makefile
delete mode 100644 board/csb637/config.mk
delete mode 100644 board/csb637/csb637.c
delete mode 100644 include/configs/csb637.h
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
deleted file mode 100644
index a5484ae..0000000
--- a/board/csb637/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := csb637.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb637/config.mk b/board/csb637/config.mk
deleted file mode 100644
index e2cc8a6..0000000
--- a/board/csb637/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23fc0000
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
deleted file mode 100644
index d7fdcc4..0000000
--- a/board/csb637/csb637.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <netdev.h>
-#include <asm/io.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <bcm5221.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of CSB637-Board */
- gd->bd->bi_arch_number = MACH_TYPE_CSB637;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = bcm5221_InitPhy;
- p_phyops->IsPhyConnected = bcm5221_IsPhyConnected;
- p_phyops->GetLinkSpeed = bcm5221_GetLinkSpeed;
- p_phyops->AutoNegotiate = bcm5221_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 87e014c..2de664e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 1d3141a..ef84f26 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
meesc arm arm926ejs - 2011-07-17 Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
deleted file mode 100644
index 7a85d65..0000000
--- a/include/configs/csb637.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * Configuation settings for the Cogent CSB637 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 184320000 /* from 3.6864 MHz crystal (3686400 * 50) */
-#define AT91C_MASTER_CLOCK 46080000 /* (AT91C_MAIN_CLOCK/4) peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CSB637 1 /* on a CSB637 board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 75 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4
-#define CONFIG_SYS_ALT_MEMTEST 1
-#define CONFIG_SYS_MEMTEST_SCRATCH CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#undef CONFIG_AT91C_USE_RMII
-
-#undef CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 0
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-/*
- * FLASH Device configuration
- */
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
-#define CONFIG_SYS_MAX_FLASH_SECT 64
-
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 3
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 44/52] ARM: remove broken "kb9202" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (42 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 43/52] ARM: remove broken "csb637" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 45/52] ARM: remove broken "m501sk" board Wolfgang Denk
` (9 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/kb9202/Makefile | 53 -------------
board/kb9202/config.mk | 1 -
board/kb9202/kb9202.c | 107 -------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/kb9202.h | 196 ----------------------------------------------
6 files changed, 1 insertions(+), 358 deletions(-)
delete mode 100644 board/kb9202/Makefile
delete mode 100644 board/kb9202/config.mk
delete mode 100644 board/kb9202/kb9202.c
delete mode 100644 include/configs/kb9202.h
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
deleted file mode 100644
index 49be161..0000000
--- a/board/kb9202/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Adapted for KwikByte KB920x boards - APR2005
-#
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := kb9202.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/kb9202/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
deleted file mode 100644
index 3164cc5..0000000
--- a/board/kb9202/kb9202.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <lxt971a.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-void lowlevel_init(void) {
- /* Required by assembly functions - do nothing */
-}
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- gd->bd->bi_arch_number = MACH_TYPE_KB9200;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac);
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status);
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = lxt972_InitPhy;
- p_phyops->IsPhyConnected = lxt972_IsPhyConnected;
- p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed;
- p_phyops->AutoNegotiate = lxt972_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 2de664e..cf8cb53 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index ef84f26..f406502 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
meesc arm arm926ejs - 2011-07-17 Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
deleted file mode 100644
index cfb7cea..0000000
--- a/include/configs/kb9202.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuation settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */
-#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-/* Only define one of the following, based on board type */
-/* #define CONFIG_KB9200 1 KwikByte KB9202 board */
-/* #define CONFIG_KB9201 1 KwikByte KB9202 board */
-#define CONFIG_KB9202 1 /* KwikByte KB9202 board */
-
-#define CONFIG_KB920x 1 /* Any KB920x board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_SYS_LONGHELP
-
-#ifndef roundup
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-#endif
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ENV_OVERWRITE 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-
-#ifdef CONFIG_KB9202
-#define PHYS_FLASH_SIZE 0x1000000
-#else
-#define PHYS_FLASH_SIZE 0x200000
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_HARD_I2C
-
-#define CONFIG_ENV_IS_IN_EEPROM
-
-#ifdef CONFIG_KB9202
-#define CONFIG_ENV_OFFSET 0x3E00
-#define CONFIG_ENV_SIZE 0x0200
-#else
-#define CONFIG_ENV_OFFSET 0x1000
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 45/52] ARM: remove broken "m501sk" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (43 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 44/52] ARM: remove broken "kb9202" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 46/52] ARM: remove broken "at91rm9200dk" board Wolfgang Denk
` (8 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/m501sk/Makefile | 50 ----------
board/m501sk/config.mk | 1 -
board/m501sk/eeprom.c | 102 ---------------------
board/m501sk/m501sk.c | 203 -----------------------------------------
board/m501sk/m501sk.h | 167 ---------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/m501sk.h | 228 ----------------------------------------------
8 files changed, 1 insertions(+), 752 deletions(-)
delete mode 100644 board/m501sk/Makefile
delete mode 100644 board/m501sk/config.mk
delete mode 100644 board/m501sk/eeprom.c
delete mode 100644 board/m501sk/m501sk.c
delete mode 100644 board/m501sk/m501sk.h
delete mode 100644 include/configs/m501sk.h
diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile
deleted file mode 100644
index 439e99f..0000000
--- a/board/m501sk/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := m501sk.o eeprom.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/m501sk/config.mk b/board/m501sk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/m501sk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c
deleted file mode 100644
index d1a46f3..0000000
--- a/board/m501sk/eeprom.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Add by Alan Lu, 07-29-2005
- * For ATMEL AT24C16 EEPROM
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#ifdef CONFIG_SYS_EEPROM_AT24C16
-#undef DEBUG
-
-void eeprom_init(void)
-{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-}
-
-int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, count = 0, i = 0;
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_read(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
- return 0;
-}
-
-/*
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
- * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
- * 0x00000nxx for EEPROM address selectors and page number at n.
- */
-int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, i = 0, count = 0;
-
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_write(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
-
- return 0;
-}
-
-#ifndef CONFIG_SPI
-int eeprom_probe(unsigned dev_addr, unsigned offset)
-{
- unsigned char chip;
-
- /* Probe the chip address */
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
- chip = offset >> 8; /* block number */
-#else
- chip = offset >> 16; /* block number */
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
-
- chip |= dev_addr; /* insert device address */
- return (i2c_probe(chip));
-}
-#endif
-#endif
diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c
deleted file mode 100644
index c995768..0000000
--- a/board/m501sk/m501sk.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2008
- * Based on modifications by Alan Lu / Artila
- * Author : Timo Tuunainen / Sysart
- Kimmo Leppala / Sysart
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-#include "m501sk.h"
-#include "net.h"
-
-#ifdef CONFIG_M501SK
-
-void m501sk_gpio_init(void)
-{
- AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96);
- AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96);
- AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8);
-
- /* Power OFF all USART's LEDs */
- AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-}
-
-uchar m501sk_gpio_set(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-uchar m501sk_gpio_clear(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
- gd->bd->bi_arch_number = MACH_TYPE_M501;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- m501sk_gpio_init();
-
- /* Do interrupt init here, because flash needs timers */
- timer_init();
- flash_init();
-
- return 0;
-}
-
-int dram_init(void)
-{
- int i = 0;
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-
- for (i = 0; i < 500; i++) {
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
- m501sk_gpio_clear(M501SK_BUZZER);
- udelay(250);
- m501sk_gpio_set(M501SK_DEBUG_LED3);
- m501sk_gpio_set(M501SK_BUZZER);
- udelay(80);
- }
- m501sk_gpio_clear(M501SK_BUZZER);
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
-
- return 0;
-}
-
-int board_late_init(void)
-{
-#if defined(CONFIG_CMD_NET)
- eth_init(gd->bd);
- eth_halt();
-#endif
-
- /* Protect U-Boot, kernel & ramdisk memory addresses */
- run_command("protect on 10000000 1041ffff", 0);
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-#endif /* CONFIG_M501SK */
diff --git a/board/m501sk/m501sk.h b/board/m501sk/m501sk.h
deleted file mode 100644
index 51d10f5..0000000
--- a/board/m501sk/m501sk.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/include/asm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __M501SK_H
-#define __M501SK_H
-
-#ifndef __ASSEMBLY__
-#include <asm/arch-at91rm9200/AT91RM9200.h>
-#else
-#include <asm/arch-at91rm9200/AT91RM9200_inc.h>
-#endif
-
-#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) /* Pin Controlled by PA22 */
-#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) /* USART 2 RxD */
-#define AT91C_PA5_TXD3 ((unsigned int) 1 << 5) /* USART 3 TxD */
-#define AT91C_PA6_RXD3 ((unsigned int) 1 << 6) /* USART 3 RxD */
-
-/* ========== Register definition for PIOD peripheral ========== */
-#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) /* Pin Data stat Reg */
-#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) /* Clear Output Data Reg */
-#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) /* Output Write Enable Reg */
-#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) /* Multi-driver Enable Reg */
-#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) /* Interrupt Mask Reg */
-#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) /* Interrupt Enable Reg */
-#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) /* Output Data stat Reg */
-#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) /* Set Output Data Reg */
-#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) /* PIO Enable Reg */
-#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) /* Output Write Disable Reg */
-#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) /* Pull-up Enable Reg */
-#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) /* Multi-driver Disable Reg */
-#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) /* Interrupt stat Reg */
-#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) /* Interrupt Disable Reg */
-#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) /* PIO Disable Reg */
-#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) /* Output Disable Regr */
-#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) /* Output Write stat Reg */
-#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) /* AB Select stat Reg */
-#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) /* Select A Reg */
-#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) /* Pad Pull-up stat Reg */
-#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) /* Pull-up Disable Reg */
-#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) /* Multi-driver stat Reg */
-#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) /* PIO stat Reg */
-#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) /* Output Enable Reg */
-#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) /* Output stat Reg */
-#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) /* Input Filter Enable Reg */
-#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) /* Select B Reg */
-#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) /* Input Filter Disable Reg */
-#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) /* Input Filter stat Reg */
-
-#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) /* Pin Controlled by PD0 */
-#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) /* Enet MAC Tx Data 0*/
-#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) /* Pin Controlled by PD1 */
-#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) /* Enet MAC Tx Data 1*/
-#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) /* Pin Controlled by PD10 */
-#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) /* PMC Prog Clk Oput 3*/
-#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) /* ETMARM9 pl stat1 */
-#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) /* Pin Controlled by PD11 */
-#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) /* */
-#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) /* ETMARM9 pl stat2 */
-#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) /* Pin Controlled by PD12 */
-#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) /* */
-#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) /* ETM Trace Pkt 0 */
-#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) /* Pin Controlled by PD13 */
-#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) /* */
-#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) /* ETM Trace Pkt 1 */
-#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) /* Pin Controlled by PD14 */
-#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) /* */
-#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) /* ETM Trace Pkt 2 */
-#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) /* Pin Controlled by PD15 */
-#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) /* SSC TxD */
-#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) /* ETM Trace Pkt 3 */
-#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) /* Pin Controlled by PD16 */
-#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) /* SSC TxD 1 */
-#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) /* ETM Trace Pkt 4 */
-#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) /* Pin Controlled by PD17 */
-#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) /* SSC TxD 2 */
-#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) /* ETM Trace Pkt 5 */
-#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) /* Pin Controlled by PD18 */
-#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) /* SPI Perip CS 1 */
-#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) /* ETM Trace Pkt 6 */
-#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) /* Pin Controlled by PD19 */
-#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) /* SPI Perip CS 2 */
-#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) /* ETM Trace Pkt 7 */
-#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) /* Pin Controlled by PD2 */
-#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) /* Ethernet MAC TxD 2 */
-#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) /* Pin Controlled by PD20 */
-#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) /* SPI Perip CS 3 */
-#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) /* ETM Trace Pkt 8 */
-#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) /* Pin Controlled by PD21 */
-#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) /* Usart 0 RTS */
-#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) /* ETM Trace Pkt 9 */
-#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) /* Pin Controlled by PD22 */
-#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) /* Usart 0 RTS */
-#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) /* ETM Trace Pkt 10 */
-#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) /* Pin Controlled by PD23 */
-#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) /* USART 2 RTS */
-#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) /* ETM Trace Pkt 11 */
-#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) /* Pin Controlled by PD24 */
-#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) /* USART 3 RTS */
-#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) /* ETM Trace Pkt 12 */
-#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) /* Pin Controlled by PD25 */
-#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) /* USART 1 DTR */
-#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) /* ETM Trace Pkt 13 */
-#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) /* Pin Controlled by PD26 */
-#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) /* ETM Trace Pkt 14 */
-#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) /* Pin Controlled by PD27 */
-#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) /* ETM Trace Pkt 15 */
-#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) /* Pin Controlled by PD3 */
-#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) /* Enet MAC TxD 3 */
-#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) /* Pin Controlled by PD4 */
-#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) /* Enet MAC TxEn */
-#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) /* Pin Controlled by PD5 */
-#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) /* Enet MAC TxCE */
-#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) /* Pin Controlled by PD6 */
-#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) /* DBGU Debug TxD */
-#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) /* Pin Controlled by PD7 */
-#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) /* PMC Prog Clk Oput 0*/
-#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) /* ETM Sync signal */
-#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) /* Pin Controlled by PD8 */
-#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) /* PMC Prog Clk Oput 1*/
-#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) /* ETM Trace Clk sig */
-#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) /* Pin Controlled by PD9 */
-#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) /* PMC Prog Clk 2 */
-#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) /* ETM ARM9 pl stat0 */
-#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
-#define AT91C_PIO_PC5 ((unsigned int) 1 << 5)
-#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB8 ((unsigned int) 1 << 8)
-#define AT91C_PIO_PB9 ((unsigned int) 1 << 9)
-#define AT91C_PIO_PB10 ((unsigned int) 1 << 10)
-#define AT91C_PIO_PB11 ((unsigned int) 1 << 11)
-#define AT91C_PIO_PB17 ((unsigned int) 1 << 17)
-#define AT91C_PIO_PB28 ((unsigned int) 1 << 28)
-#define AT91C_PIO_PB29 ((unsigned int) 1 << 29)
-
-typedef enum {
- M501SK_BUZZER = 38,
- M501SK_DEBUG_LED1 = 96,
- M501SK_DEBUG_LED2,
- M501SK_DEBUG_LED3,
- M501SK_DEBUG_LED4,
- M501SK_READY_LED = 102,
-} M501SK_PIO;
-
-void m501sk_gpio_init(void);
-uchar m501sk_gpio_set(M501SK_PIO io);
-uchar m501sk_gpio_clear(M501SK_PIO io);
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index cf8cb53..a1d3728 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
cm4008 arm arm920t - - ks8695
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f406502..407f29f 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+m501sk arm arm920t - 2011-07-17
kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
deleted file mode 100644
index 68f0415..0000000
--- a/include/configs/m501sk.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Based on Modifications by Alan Lu / Artila and
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the Artila M-501 starter kit,
- * with V02 processor card.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MAIN_CLOCK 179712000
-/* Perip clock (AT91C_MASTER_CLOCK / 3) */
-#define AT91C_MASTER_CLOCK 59904000
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_MENUPROMPT "."
-/*
- * LowLevel Init
- */
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define CONFIG_SYS_MCKR_VAL 0x00000202
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_AT24C16
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#undef CONFIG_RTC_DS1338
-#define CONFIG_RTC_RS5C372A
-#undef CONFIG_POST
-#define CONFIG_M501SK
-#define CONFIG_CMC_PU2
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \
- "initrd=0x20800000,8192000 ramdisk_size=15360 " \
- "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \
- "128k(loader)ro,128k(reserved)ro,1408k(linux)" \
- "ro,2560k(ramdisk)ro,-(userdisk)"
-#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000"
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.254
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_BOOTFILE uImage
-#define CONFIG_ETHADDR 00:13:48:aa:bb:cc
-#define CONFIG_ENV_OVERWRITE 1
-#define BOARD_LATE_INIT
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "unlock=yes\0"
-
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>"
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
-/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
-#define CONFIG_SYS_MEMTEST_END 0x00100000
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000)
-#define CONFIG_ENV_SIZE 2048
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 1024
-#define CONFIG_ENV_SIZE 1024
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-/* use for protect flash sectors */
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 46/52] ARM: remove broken "at91rm9200dk" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (44 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 45/52] ARM: remove broken "m501sk" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Wolfgang Denk
` (7 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/atmel/at91rm9200dk/Makefile | 56 ----
board/atmel/at91rm9200dk/at91rm9200dk.c | 167 ----------
board/atmel/at91rm9200dk/config.mk | 1 -
board/atmel/at91rm9200dk/flash.c | 502 -------------------------------
board/atmel/at91rm9200dk/led.c | 80 -----
board/atmel/at91rm9200dk/mux.c | 29 --
board/atmel/at91rm9200dk/partition.c | 40 ---
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/at91rm9200dk.h | 202 -------------
10 files changed, 1 insertions(+), 1078 deletions(-)
delete mode 100644 board/atmel/at91rm9200dk/Makefile
delete mode 100644 board/atmel/at91rm9200dk/at91rm9200dk.c
delete mode 100644 board/atmel/at91rm9200dk/config.mk
delete mode 100644 board/atmel/at91rm9200dk/flash.c
delete mode 100644 board/atmel/at91rm9200dk/led.c
delete mode 100644 board/atmel/at91rm9200dk/mux.c
delete mode 100644 board/atmel/at91rm9200dk/partition.c
delete mode 100644 include/configs/at91rm9200dk.h
diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile
deleted file mode 100644
index bc3dbc6..0000000
--- a/board/atmel/at91rm9200dk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += flash.o
-COBJS-y += led.o
-ifdef CONFIG_HAS_DATAFLASH
-COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o
-COBJS-y += partition.o
-endif
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
deleted file mode 100644
index 49b5fe3..0000000
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <exports.h>
-#include <netdev.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-void board_reset (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOA;
-
- /* Clear PA19 to trigger the hard reset */
- writel(0x00080000, pio->PIO_CODR);
- writel(0x00080000, pio->PIO_OER);
- writel(0x00080000, pio->PIO_PER);
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe (ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-void nand_init (void)
-{
- /* Setup Smart Media, fitst enable the address range of CS3 */
- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
- /* set the bus interface characteristics based on
- tDS Data Set up Time 30 - ns
- tDH Data Hold Time 20 - ns
- tALS ALE Set up Time 20 - ns
- 16ns at 60 MHz ~= 3 */
-/*memory mapping structures */
-#define SM_ID_RWH (5 << 28)
-#define SM_RWH (1 << 28)
-#define SM_RWS (0 << 24)
-#define SM_TDF (1 << 8)
-#define SM_NWS (3)
- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-
- /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
-
- /* Configure PC2 as input (signal READY of the SmartMedia) */
- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
-
- /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
- printf (" No SmartMedia card inserted\n");
-#ifdef DEBUG
- printf (" SmartMedia card inserted\n");
-
- printf ("Probing@0x%.8x\n", AT91_SMARTMEDIA_BASE);
-#endif
- printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
-}
-#endif
diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/atmel/at91rm9200dk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
deleted file mode 100644
index 902c3c4..0000000
--- a/board/atmel/at91rm9200dk/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef
-{
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgAT49BV16x4[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 2, 32*1024 }, /* 2 * 32 kBytes sectors */
- { 30, 64*1024 }, /* 30 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV16x4A[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 31, 64*1024 }, /* 31 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV6416[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 127, 64*1024 }, /* 127 * 64 kBytes sectors */
-};
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/* AT49BV1614A Codes */
-#define FLASH_CODE1 0xAA
-#define FLASH_CODE2 0x55
-#define ID_IN_CODE 0x90
-#define ID_OUT_CODE 0xF0
-
-
-#define CMD_READ_ARRAY 0x00F0
-#define CMD_UNLOCK1 0x00AA
-#define CMD_UNLOCK2 0x0055
-#define CMD_ERASE_SETUP 0x0080
-#define CMD_ERASE_CONFIRM 0x0030
-#define CMD_PROGRAM 0x00A0
-#define CMD_UNLOCK_BYPASS 0x0020
-#define CMD_SECTOR_UNLOCK 0x0070
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
-
-#define BIT_ERASE_DONE 0x0080
-#define BIT_RDY_MASK 0x0080
-#define BIT_PROGRAM_ERROR 0x0020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-void flash_identification (flash_info_t * info)
-{
- volatile u16 manuf_code, device_code, add_device_code;
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_IN_CODE;
-
- manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
- device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
- add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_OUT_CODE;
-
- /* Vendor type */
- info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
- printf ("Atmel: ");
-
- if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- if ((add_device_code & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
- printf ("AT49BV1614A (16Mbit)\n");
- } else { /* AT49BV1614 Flash */
- info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
- printf ("AT49BV1614 (16Mbit)\n");
- }
-
- } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
- printf ("AT49BV6416 (64Mbit)\n");
- }
-}
-
-ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
-{
- int i, nb_sectors = 0;
-
- for (i=0; i<nb_blocks; i++){
- nb_sectors += pOrgDef[i].sector_number;
- }
-
- return nb_sectors;
-}
-
-void flash_unlock_sector(flash_info_t * info, unsigned int sector)
-{
- volatile u16 *addr = (volatile u16 *) (info->start[sector]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- *addr = CMD_SECTOR_UNLOCK;
-}
-
-
-ulong flash_init (void)
-{
- int i, j, k;
- unsigned int flash_nb_blocks, sector;
- unsigned int start_address;
- OrgDef *pOrgDef;
-
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_identification (&flash_info[i]);
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- pOrgDef = OrgAT49BV16x4;
- flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */
-
- pOrgDef = OrgAT49BV16x4A;
- flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- pOrgDef = OrgAT49BV6416;
- flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
- } else {
- flash_nb_blocks = 0;
- pOrgDef = OrgAT49BV16x4;
- }
-
- flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
- memset (flash_info[i].protect, 0, flash_info[i].sector_count);
-
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
-
- sector = 0;
- start_address = flashbase;
- flash_info[i].size = 0;
-
- for (j = 0; j < flash_nb_blocks; j++) {
- for (k = 0; k < pOrgDef[j].sector_number; k++) {
- flash_info[i].start[sector++] = start_address;
- start_address += pOrgDef[j].sector_size;
- flash_info[i].size += pOrgDef[j].sector_size;
- }
- }
-
- size += flash_info[i].size;
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- /* Unlock all sectors@reset */
- for (j=0; j<flash_info[i].sector_count; j++){
- flash_unlock_sector(&flash_info[i], j);
- }
- }
- }
-
- /* Protect binary boot image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
-
- /* Protect environment variables */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- /* Protect U-Boot gzipped image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_U_BOOT_BASE,
- CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (ATM_MANUFACT & FLASH_VENDMASK):
- printf ("Atmel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (ATM_ID_BV1614 & FLASH_TYPEMASK):
- printf ("AT49BV1614 (16Mbit)\n");
- break;
- case (ATM_ID_BV1614A & FLASH_TYPEMASK):
- printf ("AT49BV1614A (16Mbit)\n");
- break;
- case (ATM_ID_BV6416 & FLASH_TYPEMASK):
- printf ("AT49BV6416 (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip1;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (ATM_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- volatile u16 *addr = (volatile u16 *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip1 = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip1 = TMO;
- break;
- }
-
- if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip1 = READY;
-
- } while (!chip1);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip1 == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip1 == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile u16 *addr = (volatile u16 *) dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip1;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait until flash is ready */
- chip1 = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip1 = ERR | TMO;
- break;
- }
- if (!chip1 && ((result & 0x80) == (data & 0x80)))
- chip1 = READY;
-
- } while (!chip1);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip1 == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((volatile u16 *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
- 8);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- };
-
- return ERR_OK;
-}
diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c
deleted file mode 100644
index 47a3bfc..0000000
--- a/board/atmel/at91rm9200dk/led.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-
-#define GREEN_LED AT91C_PIO_PB0
-#define YELLOW_LED AT91C_PIO_PB1
-#define RED_LED AT91C_PIO_PB2
-
-void green_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = GREEN_LED;
-}
-
-void yellow_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = YELLOW_LED;
-}
-
-void red_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = RED_LED;
-}
-
-void green_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = GREEN_LED;
-}
-
-void yellow_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = YELLOW_LED;
-}
-
-void red_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = RED_LED;
-}
-
-
-void coloured_LED_init (void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- AT91PS_PMC PMC = AT91C_BASE_PMC;
- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
- /* Disable peripherals on LEDs */
- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Enable pins as outputs */
- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Turn all LEDs OFF */
- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-}
diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c
deleted file mode 100644
index a00563e..0000000
--- a/board/atmel/at91rm9200dk/mux.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-int AT91F_GetMuxStatus(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-
-
- if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO)
- return 1;
-
- return 0;
-}
-
-void AT91F_SelectMMC(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Set Output */
- AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
-
-void AT91F_SelectSPI(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Clear Output */
- AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
deleted file mode 100644
index c739b11..0000000
--- a/board/atmel/at91rm9200dk/partition.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/boards.cfg b/boards.cfg
index a1d3728..b2e3548 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 407f29f..936c3fb 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91rm9200dk arm arm920t - 2011-07-17
m501sk arm arm920t - 2011-07-17
kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
deleted file mode 100644
index 15de310..0000000
--- a/include/configs/at91rm9200dk.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS (0xC << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-#else
-#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (45 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 46/52] ARM: remove broken "at91rm9200dk" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-18 2:52 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards Hong Xu
2011-07-30 11:12 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Remy Bohmer
2011-07-17 22:17 ` [U-Boot] [PATCH 48/52] ARM: remove broken "at91sam9263ek" board Wolfgang Denk
` (6 subsequent siblings)
53 siblings, 2 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
Cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
---
MAINTAINERS | 2 -
MAKEALL | 2 -
Makefile | 23 ---
board/atmel/at91sam9261ek/Makefile | 56 ------
board/atmel/at91sam9261ek/at91sam9261ek.c | 292 -----------------------------
board/atmel/at91sam9261ek/config.mk | 1 -
board/atmel/at91sam9261ek/led.c | 43 -----
board/atmel/at91sam9261ek/partition.c | 40 ----
doc/README.scrapyard | 2 +
include/configs/at91sam9261ek.h | 240 -----------------------
10 files changed, 2 insertions(+), 699 deletions(-)
delete mode 100644 board/atmel/at91sam9261ek/Makefile
delete mode 100644 board/atmel/at91sam9261ek/at91sam9261ek.c
delete mode 100644 board/atmel/at91sam9261ek/config.mk
delete mode 100644 board/atmel/at91sam9261ek/led.c
delete mode 100644 board/atmel/at91sam9261ek/partition.c
delete mode 100644 include/configs/at91sam9261ek.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f36643..da3202f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -630,7 +630,6 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
otc570 ARM926EJS (AT91SAM9263 SoC)
Sedji Gaouaou<sedji.gaouaou@atmel.com>
- at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
Simon Guinot <simon.guinot@sequanux.org>
@@ -743,7 +742,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
- at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
diff --git a/MAKEALL b/MAKEALL
index d43bcc5..2e2826c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -394,9 +394,7 @@ LIST_ARMV7=" \
LIST_at91="$(boards_by_soc at91)\
$(boards_by_soc at91rm9200)\
at91sam9260ek \
- at91sam9261ek \
at91sam9263ek \
- at91sam9g10ek \
at91sam9g20ek \
at91sam9m10g45ek \
at91sam9rlek \
diff --git a/Makefile b/Makefile
index af6ff87..b98754a 100644
--- a/Makefile
+++ b/Makefile
@@ -796,29 +796,6 @@ M5485HFE_config : unconfig
## ARM926EJ-S Systems
#########################################################################
-at91sam9261ek_nandflash_config \
-at91sam9261ek_dataflash_cs0_config \
-at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config \
-at91sam9g10ek_nandflash_config \
-at91sam9g10ek_dataflash_cs0_config \
-at91sam9g10ek_dataflash_cs3_config \
-at91sam9g10ek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring 9g10,$@)" ] ; then \
- echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
-
at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
at91sam9263ek_nandflash_config \
diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile
deleted file mode 100644
index 9d20ba0..0000000
--- a/board/atmel/at91sam9261ek/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91sam9261ek.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
deleted file mode 100644
index de5cfae..0000000
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
-#include <net.h>
-#include <netdev.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void at91sam9261ek_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
-#ifdef CONFIG_AT91SAM9G10EK
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-#else
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-#endif
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(2));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-
- at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
-}
-#endif
-
-#ifdef CONFIG_DRIVER_DM9000
-static void at91sam9261ek_dm9000_hw_init(void)
-{
- /* Configure SMC CS2 for DM9000 */
-#ifdef CONFIG_AT91SAM9G10EK
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
-#else
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
-#endif
-
- /* Configure Reset signal as output */
- at91_set_gpio_output(AT91_PIN_PC10, 0);
-
- /* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(AT91_PIN_PC11, 0);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91SAM9261_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
-}
-
-static void at91sam9261ek_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
-
-#ifdef CONFIG_AT91SAM9G10EK
- gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
-#else
- gd->fb_base = AT91SAM9261_SRAM_BASE;
-#endif
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
-#ifdef CONFIG_AT91SAM9G10EK
- /* arch number of AT91SAM9G10EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
-#else
- /* arch number of AT91SAM9261EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
-#endif
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91sam9261ek_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_DRIVER_DM9000
- at91sam9261ek_dm9000_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9261ek_lcd_hw_init();
-#endif
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
- return dm9000_initialize(bis);
-}
-#endif
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-#ifdef CONFIG_DRIVER_DM9000
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
-}
-#endif
diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9261ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c
deleted file mode 100644
index 5d1c5f2..0000000
--- a/board/atmel/at91sam9261ek/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
-
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
- at91_set_gpio_value(CONFIG_RED_LED, 0);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
deleted file mode 100644
index c739b11..0000000
--- a/board/atmel/at91sam9261ek/partition.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 936c3fb..2bb5870 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,8 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91sam9g10ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
+at91sam9261ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91rm9200dk arm arm920t - 2011-07-17
m501sk arm arm920t - 2011-07-17
kb9202 arm arm920t - 2011-07-17
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
deleted file mode 100644
index 401478b..0000000
--- a/include/configs/at91sam9261ek.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91SAM9261EK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/
-#else
-#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
-#endif
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555 1
-#else
-#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */
-#endif
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD22 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
-/* our CLE is AD21 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
-
-#endif
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH 1
-
-/* Ethernet */
-#define CONFIG_NET_MULTI 1
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x30000000
-#define DM9000_IO CONFIG_DM9000_BASE
-#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT 1
-#define CONFIG_DM9000_NO_SROM 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
-#else
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
-#endif
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro," \
- "256k(uboot)ro,128k(env1)ro," \
- "128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards
2011-07-17 22:17 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Wolfgang Denk
@ 2011-07-18 2:52 ` Hong Xu
2011-07-18 6:39 ` Albert ARIBAUD
2011-07-30 11:12 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Remy Bohmer
1 sibling, 1 reply; 90+ messages in thread
From: Hong Xu @ 2011-07-18 2:52 UTC (permalink / raw)
To: u-boot
Hi Reinhard,
It's a pity to see that some of the AT91 boards are planed to be removed
by Wolfgang.
Several weeks ago, the patches for SAM9261/9G10 have got Acks from you.
See http://www.mail-archive.com/u-boot at lists.denx.de/msg54829.html
But I don't know why it's not merged upstream.
For SAM9RL, the V3 patches have been sent long time ago and was pinged.
But no response any longer.
The similar stories are also applied for SAM9263 and SAM9M10G45.
We of course need the mainline support for all SAM9 boards in U-Boot.
But it's the time we need your plans/suggestions/NAKs/ACKs to move on.
Thanks.
BR,
Eric
On 07/18/2011 06:17 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
> Cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
> ---
> MAINTAINERS | 2 -
> MAKEALL | 2 -
> Makefile | 23 ---
> board/atmel/at91sam9261ek/Makefile | 56 ------
> board/atmel/at91sam9261ek/at91sam9261ek.c | 292
> -----------------------------
> board/atmel/at91sam9261ek/config.mk | 1 -
> board/atmel/at91sam9261ek/led.c | 43 -----
> board/atmel/at91sam9261ek/partition.c | 40 ----
> doc/README.scrapyard | 2 +
> include/configs/at91sam9261ek.h | 240 -----------------------
> 10 files changed, 2 insertions(+), 699 deletions(-)
> delete mode 100644 board/atmel/at91sam9261ek/Makefile
> delete mode 100644 board/atmel/at91sam9261ek/at91sam9261ek.c
> delete mode 100644 board/atmel/at91sam9261ek/config.mk
> delete mode 100644 board/atmel/at91sam9261ek/led.c
> delete mode 100644 board/atmel/at91sam9261ek/partition.c
> delete mode 100644 include/configs/at91sam9261ek.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9f36643..da3202f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -630,7 +630,6 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
> otc570 ARM926EJS (AT91SAM9263 SoC)
>
> Sedji Gaouaou<sedji.gaouaou@atmel.com>
> - at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
> at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
>
> Simon Guinot <simon.guinot@sequanux.org>
> @@ -743,7 +742,6 @@ Manikandan Pillai <mani.pillai@ti.com>
> Stelian Pop <stelian.pop@leadtechdesign.com>
>
> at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
> - at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
> at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
> at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
>
[...]
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards
2011-07-18 2:52 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards Hong Xu
@ 2011-07-18 6:39 ` Albert ARIBAUD
2011-07-25 7:39 ` Hong Xu
0 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 6:39 UTC (permalink / raw)
To: u-boot
Hi Eric,
Le 18/07/2011 04:52, Hong Xu a ?crit :
> Hi Reinhard,
>
> It's a pity to see that some of the AT91 boards are planed to be removed
> by Wolfgang.
>
> Several weeks ago, the patches for SAM9261/9G10 have got Acks from you.
> See http://www.mail-archive.com/u-boot at lists.denx.de/msg54829.html
> But I don't know why it's not merged upstream.
>
> For SAM9RL, the V3 patches have been sent long time ago and was pinged.
> But no response any longer.
>
> The similar stories are also applied for SAM9263 and SAM9M10G45.
>
> We of course need the mainline support for all SAM9 boards in U-Boot.
> But it's the time we need your plans/suggestions/NAKs/ACKs to move on.
>
> Thanks.
Note: I'll naturally defer the decision of what to make with the AT91
boards to Reinhard, and likewise to other ARM custodians for boards the
architecture of which falls under their 'jurisdiction'.
> BR,
> Eric
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards
2011-07-18 6:39 ` Albert ARIBAUD
@ 2011-07-25 7:39 ` Hong Xu
2011-07-26 12:59 ` [U-Boot] AT91: rework and fixes (was:Re: [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards) Reinhard Meyer
0 siblings, 1 reply; 90+ messages in thread
From: Hong Xu @ 2011-07-25 7:39 UTC (permalink / raw)
To: u-boot
Hi Albert,
On 07/18/2011 02:39 PM, Albert ARIBAUD wrote:
> Hi Eric,
>
> Le 18/07/2011 04:52, Hong Xu a ?crit :
> > Hi Reinhard,
> >
> > It's a pity to see that some of the AT91 boards are planed to be removed
> > by Wolfgang.
> >
> > Several weeks ago, the patches for SAM9261/9G10 have got Acks from you.
> > See http://www.mail-archive.com/u-boot at lists.denx.de/msg54829.html
> > But I don't know why it's not merged upstream.
> >
> > For SAM9RL, the V3 patches have been sent long time ago and was pinged.
> > But no response any longer.
> >
> > The similar stories are also applied for SAM9263 and SAM9M10G45.
> >
> > We of course need the mainline support for all SAM9 boards in U-Boot.
> > But it's the time we need your plans/suggestions/NAKs/ACKs to move on.
> >
> > Thanks.
>
> Note: I'll naturally defer the decision of what to make with the AT91
> boards to Reinhard, and likewise to other ARM custodians for boards the
> architecture of which falls under their 'jurisdiction'.
Understand. But it looks like Reinhard has bunch of paid work at hand
and he has his vocation in the near future (He mentioned this in an
email towards Wolfgang's [U-Boot] [PATCH 00/52] ARM: remove broken
boards). We noticed that there are several AT91 fixes in the mailing
list without any response.
As a suggestion, how about we setup a git branch and collect AT91
related patches during Reinhard's busy time and vocation time? If yes,
can we ask for `pull request' from you?
Thanks.
BR,
Eric
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] AT91: rework and fixes (was:Re: [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards)
2011-07-25 7:39 ` Hong Xu
@ 2011-07-26 12:59 ` Reinhard Meyer
2011-07-26 13:21 ` [U-Boot] AT91: rework and fixes Andreas Bießmann
2011-07-27 2:07 ` Hong Xu
0 siblings, 2 replies; 90+ messages in thread
From: Reinhard Meyer @ 2011-07-26 12:59 UTC (permalink / raw)
To: u-boot
Dear Hong Xu,
> Hi Albert,
>
> On 07/18/2011 02:39 PM, Albert ARIBAUD wrote:
> > Hi Eric,
> >
> > Le 18/07/2011 04:52, Hong Xu a ?crit :
> > > Hi Reinhard,
> > >
> > > It's a pity to see that some of the AT91 boards are planed to be removed
> > > by Wolfgang.
> > >
> > > Several weeks ago, the patches for SAM9261/9G10 have got Acks from you.
> > > See http://www.mail-archive.com/u-boot at lists.denx.de/msg54829.html
> > > But I don't know why it's not merged upstream.
Now, an actual at91sam9261_devices.c and at91sam9261.h are on top of
u-boot-atmel/master.
If your board patches for az91sam9261-ek still work with that, I can
apply them again to master.
> > >
> > > For SAM9RL, the V3 patches have been sent long time ago and was pinged.
> > > But no response any longer.
I have changes requested there.
> > >
> > > The similar stories are also applied for SAM9263 and SAM9M10G45.
Changes requested as well.
> > >
> > > We of course need the mainline support for all SAM9 boards in U-Boot.
> > > But it's the time we need your plans/suggestions/NAKs/ACKs to move on.
> > >
> > > Thanks.
> >
> > Note: I'll naturally defer the decision of what to make with the AT91
> > boards to Reinhard, and likewise to other ARM custodians for boards the
> > architecture of which falls under their 'jurisdiction'.
>
> Understand. But it looks like Reinhard has bunch of paid work at hand
> and he has his vocation in the near future (He mentioned this in an
> email towards Wolfgang's [U-Boot] [PATCH 00/52] ARM: remove broken
> boards). We noticed that there are several AT91 fixes in the mailing
> list without any response.
This is not true. Most have been commented and changes requested.
>
> As a suggestion, how about we setup a git branch and collect AT91
> related patches during Reinhard's busy time and vocation time? If yes,
> can we ask for `pull request' from you?
I do not think such a "diagonal" approach is desired by anyone.
Anyway, for work reasons, there will be no extended vacation this
summer :(
Again, the work flow, as I want it followed, is as such:
1. convert/fix all SoC specific files for 9263 9g45 etc. to be in line
and equivalent to the now existing files for 9260 and 9261.
(Next should be for 9263, we should be looking at existing patches to
fix that SoC).
I will NOT accept patches that do not fully implement the name schemes
laid out in 9260 and 9261.
2. Fix any boards to use those files AND to use relocation properly.
3. Make sure those build without warning or errors.
4. Make sure those boards still "boot" with that u-boot.
5. When a board has passed those tests (I cannot test point 4) the
"removal" patch for that board will not be applied.
Best Regards,
Reinhard
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] AT91: rework and fixes
2011-07-26 12:59 ` [U-Boot] AT91: rework and fixes (was:Re: [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards) Reinhard Meyer
@ 2011-07-26 13:21 ` Andreas Bießmann
2011-07-27 2:07 ` Hong Xu
1 sibling, 0 replies; 90+ messages in thread
From: Andreas Bießmann @ 2011-07-26 13:21 UTC (permalink / raw)
To: u-boot
Dear all,
Am 26.07.2011 14:59, schrieb Reinhard Meyer:
> Dear Hong Xu,
>> Hi Albert,
<snip>
>> As a suggestion, how about we setup a git branch and collect AT91
>> related patches during Reinhard's busy time and vocation time? If yes,
>> can we ask for `pull request' from you?
>
> I do not think such a "diagonal" approach is desired by anyone.
>
> Anyway, for work reasons, there will be no extended vacation this
> summer :(
How sad!
> Again, the work flow, as I want it followed, is as such:
<snip>
> 5. When a board has passed those tests (I cannot test point 4) the
> "removal" patch for that board will not be applied.
A removed board can always added again, if one cares.
regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] AT91: rework and fixes
2011-07-26 12:59 ` [U-Boot] AT91: rework and fixes (was:Re: [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards) Reinhard Meyer
2011-07-26 13:21 ` [U-Boot] AT91: rework and fixes Andreas Bießmann
@ 2011-07-27 2:07 ` Hong Xu
1 sibling, 0 replies; 90+ messages in thread
From: Hong Xu @ 2011-07-27 2:07 UTC (permalink / raw)
To: u-boot
Hi Reinhard,
On 07/26/2011 08:59 PM, Reinhard Meyer wrote:
> Dear Hong Xu,
> > Hi Albert,
> >
> > On 07/18/2011 02:39 PM, Albert ARIBAUD wrote:
> > > Hi Eric,
> > >
> > > Le 18/07/2011 04:52, Hong Xu a ?crit :
> > > > Hi Reinhard,
> > > >
> > > > It's a pity to see that some of the AT91 boards are planed to be
> removed
> > > > by Wolfgang.
> > > >
> > > > Several weeks ago, the patches for SAM9261/9G10 have got Acks
> from you.
> > > > See http://www.mail-archive.com/u-boot at lists.denx.de/msg54829.html
> > > > But I don't know why it's not merged upstream.
>
> Now, an actual at91sam9261_devices.c and at91sam9261.h are on top of
> u-boot-atmel/master.
> If your board patches for az91sam9261-ek still work with that, I can
> apply them again to master.
OK, I'll check and resend the board fix.
>
> > > >
> > > > For SAM9RL, the V3 patches have been sent long time ago and was
> pinged.
> > > > But no response any longer.
>
> I have changes requested there.
You mean the change requests for V3 patches? I never saw them. Is it a
general comments towards AT91 or specific to V3 patches?
But anyway, I'd like to send the patches again in the coming days.
>
> > > >
> > > > The similar stories are also applied for SAM9263 and SAM9M10G45.
>
> Changes requested as well.
Ditto.
[...]
>
> Anyway, for work reasons, there will be no extended vacation this
> summer :(
Sorry to hear this.
> Again, the work flow, as I want it followed, is as such:
>
> 1. convert/fix all SoC specific files for 9263 9g45 etc. to be in line
> and equivalent to the now existing files for 9260 and 9261.
> (Next should be for 9263, we should be looking at existing patches to
> fix that SoC).
> I will NOT accept patches that do not fully implement the name schemes
> laid out in 9260 and 9261.
>
> 2. Fix any boards to use those files AND to use relocation properly.
>
> 3. Make sure those build without warning or errors.
>
> 4. Make sure those boards still "boot" with that u-boot.
>
> 5. When a board has passed those tests (I cannot test point 4) the
> "removal" patch for that board will not be applied.
OK, the SoC fixes for 9263 and 9G45 will come firstly.
Thanks.
BR,
Eric
> Best Regards,
> Reinhard
>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards
2011-07-17 22:17 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Wolfgang Denk
2011-07-18 2:52 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" /"at91sam9g10ek" boards Hong Xu
@ 2011-07-30 11:12 ` Remy Bohmer
2011-08-02 10:54 ` Reinhard Meyer
1 sibling, 1 reply; 90+ messages in thread
From: Remy Bohmer @ 2011-07-30 11:12 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
2011/7/18 Wolfgang Denk <wd@denx.de>:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
> Cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
> ---
> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 -
> ?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 -
> ?Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 23 ---
> ?board/atmel/at91sam9261ek/Makefile ? ? ? ?| ? 56 ------
> ?board/atmel/at91sam9261ek/at91sam9261ek.c | ?292 -----------------------------
> ?board/atmel/at91sam9261ek/config.mk ? ? ? | ? ?1 -
> ?board/atmel/at91sam9261ek/led.c ? ? ? ? ? | ? 43 -----
> ?board/atmel/at91sam9261ek/partition.c ? ? | ? 40 ----
> ?doc/README.scrapyard ? ? ? ? ? ? ? ? ? ? ?| ? ?2 +
> ?include/configs/at91sam9261ek.h ? ? ? ? ? | ?240 -----------------------
> ?10 files changed, 2 insertions(+), 699 deletions(-)
> ?delete mode 100644 board/atmel/at91sam9261ek/Makefile
> ?delete mode 100644 board/atmel/at91sam9261ek/at91sam9261ek.c
> ?delete mode 100644 board/atmel/at91sam9261ek/config.mk
> ?delete mode 100644 board/atmel/at91sam9261ek/led.c
> ?delete mode 100644 board/atmel/at91sam9261ek/partition.c
> ?delete mode 100644 include/configs/at91sam9261ek.h
(I just got back from my vacation, hence the late reply)
I do not agree that support for this board is going to be removed.
This is one of my reference boards for my USB maintenance work.
I have a series of patches pending in my u-boot-usb tree ready for a
long time that fixes this board. Several times on the mailinglist a
fix for this board has been posted, but they are not picked up by the
Atmel maintainer so far. Even the Atmel tree has been under 'rework'
for more than 6 months without any push to mainline (until recently),
this made fixing these boards a moving target to shoot at.
In short: The lack on a responsive/active custiodian is not a reason
to remove board support. I also offered to take over the custodianship
already for this board. No response so far on this subject as well.
Instead of dropping this board, you can also pull this (and add my
name as maintainer for this board):
---------------------------------------------------------------------------------------------------------
The following changes since commit dd620b26332eb1e9fc0216760909c4046ba09745:
Merge branch 'master' of /home/wd/git/u-boot/custodians (2011-07-30
01:39:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git fix-at91sam9261ek
Remy Bohmer (1):
at91sam9261ek: make operational again
Makefile | 23 ---
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 31 ++--
arch/arm/cpu/arm926ejs/at91/led.c | 1 -
arch/arm/include/asm/arch-at91/at91_matrix.h | 17 ++-
arch/arm/include/asm/arch-at91/at91sam9261.h | 1 +
.../arm/include/asm/arch-at91/at91sam9261_matrix.h | 64 ---------
board/atmel/at91sam9261ek/Makefile | 6 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 147 +++++++++++---------
board/atmel/at91sam9261ek/config.mk | 1 -
board/atmel/at91sam9261ek/led.c | 8 +-
boards.cfg | 6 +
doc/README.at91 | 3 +-
include/configs/at91sam9261ek.h | 142 +++++++++++--------
13 files changed, 201 insertions(+), 249 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
deleteThe following changes since commit
dd620b26332eb1e9fc0216760909c4046ba09745:
Merge branch 'master' of /home/wd/git/u-boot/custodians (2011-07-30
01:39:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git fix-at91sam9261ek
Remy Bohmer (1):
at91sam9261ek: make operational again
Makefile | 23 ---
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 31 ++--
arch/arm/cpu/arm926ejs/at91/led.c | 1 -
arch/arm/include/asm/arch-at91/at91_matrix.h | 17 ++-
arch/arm/include/asm/arch-at91/at91sam9261.h | 1 +
.../arm/include/asm/arch-at91/at91sam9261_matrix.h | 64 ---------
board/atmel/at91sam9261ek/Makefile | 6 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 147 +++++++++++---------
board/atmel/at91sam9261ek/config.mk | 1 -
board/atmel/at91sam9261ek/led.c | 8 +-
boards.cfg | 6 +
doc/README.at91 | 3 +-
include/configs/at91sam9261ek.h | 142 +++++++++++--------
13 files changed, 201 insertions(+), 249 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
delete mode 100644 board/atmel/at91sam9261ek/config.mk
mode 100644 board/atmel/at91sam9261ek/config.mk
---------------------------------------------------------------------------------------------------------
Kind regards,
Remy
^ permalink raw reply [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards
2011-07-30 11:12 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Remy Bohmer
@ 2011-08-02 10:54 ` Reinhard Meyer
2011-08-03 8:20 ` Remy Bohmer
0 siblings, 1 reply; 90+ messages in thread
From: Reinhard Meyer @ 2011-08-02 10:54 UTC (permalink / raw)
To: u-boot
Dear Remy Bohmer, dear Wolfgang,
>
> 2011/7/18 Wolfgang Denk <wd@denx.de>:
> > Signed-off-by: Wolfgang Denk <wd@denx.de>
> > Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
> > Cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
> > ---
> > MAINTAINERS | 2 -
> > MAKEALL | 2 -
> > Makefile | 23 ---
> > board/atmel/at91sam9261ek/Makefile | 56 ------
> > board/atmel/at91sam9261ek/at91sam9261ek.c | 292 -----------------------------
> > board/atmel/at91sam9261ek/config.mk | 1 -
> > board/atmel/at91sam9261ek/led.c | 43 -----
> > board/atmel/at91sam9261ek/partition.c | 40 ----
> > doc/README.scrapyard | 2 +
> > include/configs/at91sam9261ek.h | 240 -----------------------
> > 10 files changed, 2 insertions(+), 699 deletions(-)
> > delete mode 100644 board/atmel/at91sam9261ek/Makefile
> > delete mode 100644 board/atmel/at91sam9261ek/at91sam9261ek.c
> > delete mode 100644 board/atmel/at91sam9261ek/config.mk
> > delete mode 100644 board/atmel/at91sam9261ek/led.c
> > delete mode 100644 board/atmel/at91sam9261ek/partition.c
> > delete mode 100644 include/configs/at91sam9261ek.h
As of now, this board is "unbroken" again.
I might also point out, that the Atmel folks are still the responsible
maintainers of their respective boards.
Help and testing, I am sure is welcome. If there are any issues with
Hong Xu's patch I could not detect, please report:)
Wolfgang: I have set the removal patch for this board to "non
applicable"
Best Regards,
Reinhard
PS: currently I base all on top of u-boot/master since u-boot-arm/master
is seriously broken with the OMAP patches.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 48/52] ARM: remove broken "at91sam9263ek" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (46 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 47/52] ARM: remove broken "at91sam9261ek" / "at91sam9g10ek" boards Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-08-02 19:11 ` Reinhard Meyer
2011-07-17 22:17 ` [U-Boot] [PATCH 49/52] ARM: remove broken "at91sam9m10g45ek" / "at91sam9g45ekes" boards Wolfgang Denk
` (5 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
---
MAINTAINERS | 1 -
MAKEALL | 1 -
Makefile | 19 --
board/atmel/at91sam9263ek/Makefile | 56 -----
board/atmel/at91sam9263ek/at91sam9263ek.c | 297 ------------------------
board/atmel/at91sam9263ek/config.mk | 1 -
board/atmel/at91sam9263ek/led.c | 47 ----
board/atmel/at91sam9263ek/partition.c | 39 ----
doc/README.scrapyard | 1 +
include/configs/at91sam9263ek.h | 350 -----------------------------
10 files changed, 1 insertions(+), 811 deletions(-)
delete mode 100644 board/atmel/at91sam9263ek/Makefile
delete mode 100644 board/atmel/at91sam9263ek/at91sam9263ek.c
delete mode 100644 board/atmel/at91sam9263ek/config.mk
delete mode 100644 board/atmel/at91sam9263ek/led.c
delete mode 100644 board/atmel/at91sam9263ek/partition.c
delete mode 100644 include/configs/at91sam9263ek.h
diff --git a/MAINTAINERS b/MAINTAINERS
index da3202f..e5a22ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -742,7 +742,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
- at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Tom Rix <Tom.Rix@windriver.com>
diff --git a/MAKEALL b/MAKEALL
index 2e2826c..c1b5b58 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -394,7 +394,6 @@ LIST_ARMV7=" \
LIST_at91="$(boards_by_soc at91)\
$(boards_by_soc at91rm9200)\
at91sam9260ek \
- at91sam9263ek \
at91sam9g20ek \
at91sam9m10g45ek \
at91sam9rlek \
diff --git a/Makefile b/Makefile
index b98754a..0a2ed8e 100644
--- a/Makefile
+++ b/Makefile
@@ -796,25 +796,6 @@ M5485HFE_config : unconfig
## ARM926EJ-S Systems
#########################################################################
-at91sam9263ek_norflash_config \
-at91sam9263ek_norflash_boot_config \
-at91sam9263ek_nandflash_config \
-at91sam9263ek_dataflash_config \
-at91sam9263ek_dataflash_cs0_config \
-at91sam9263ek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- elif [ "$(findstring norflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring norflash_boot,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
-
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile
deleted file mode 100644
index e43326e..0000000
--- a/board/atmel/at91sam9263ek/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91sam9263ek.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS-y))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
deleted file mode 100644
index 91efc07..0000000
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/sizes.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void at91sam9263ek_nand_hw_init(void)
-{
- unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- /* Enable CS3 */
- csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
- writel(csa, &matrix->csa[0]);
-
- /* Enable CS3 */
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
-
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
-
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_MODE_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_MODE_DBW_8 |
-#endif
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
-
- writel(1 << AT91SAM9263_ID_PIOA | 1 << AT91SAM9263_ID_PIOCDE,
- &pmc->pcer);
-
- /* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91sam9263ek_macb_hw_init(void)
-{
- unsigned long erstl;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
- at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
- /* Enable clock */
- writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
-
- /*
- * Disable pull-up on:
- * RXDV (PC25) => PHY normal mode (not Test mode)
- * ERX0 (PE25) => PHY ADDR0
- * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
-
- writel(1 << 25, &pio->pioc.pudr);
- writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
-
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- /* Re-enable pull-up */
- writel(1 << 25, &pio->pioc.puer);
- writel((1 << 25) | (1 <<26), &pio->pioe.puer);
-
- at91_macb_hw_init();
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91SAM9263_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power down */
-}
-
-static void at91sam9263ek_lcd_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
- at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
- at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
- at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
-
- writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
- gd->fb_base = AT91SAM9263_SRAM0_BASE;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-#ifndef CONFIG_SYS_NO_FLASH
-extern flash_info_t flash_info[];
-#endif
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
-#ifndef CONFIG_SYS_NO_FLASH
- ulong flash_size;
-#endif
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
-#ifndef CONFIG_SYS_NO_FLASH
- flash_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- flash_size += flash_info[i].size;
-#endif
- lcd_printf (" %ld MB SDRAM, %ld MB NAND",
- dram_size >> 20,
- nand_size >> 20 );
-#ifndef CONFIG_SYS_NO_FLASH
- lcd_printf (",\n %ld MB NOR",
- flash_size >> 20);
-#endif
- lcd_puts ("\n");
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91SAM9263EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91sam9263ek_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_set_pio_output(AT91_PIO_PORTE, 20, 1); /* select spi0 clock */
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
- at91sam9263ek_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9263ek_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *) AT91_EMAC_BASE, 0x00);
-#endif
- return rc;
-}
diff --git a/board/atmel/at91sam9263ek/config.mk b/board/atmel/at91sam9263ek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9263ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c
deleted file mode 100644
index fa1f05b..0000000
--- a/board/atmel/at91sam9263ek/led.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- writel(1 << AT91SAM9263_ID_PIOB | 1 << AT91SAM9263_ID_PIOCDE,
- &pmc->pcer);
-
- at91_set_pio_output(CONFIG_RED_LED, 1);
- at91_set_pio_output(CONFIG_GREEN_LED, 1);
- at91_set_pio_output(CONFIG_YELLOW_LED, 1);
-
- at91_set_pio_value(CONFIG_RED_LED, 0);
- at91_set_pio_value(CONFIG_GREEN_LED, 1);
- at91_set_pio_value(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
deleted file mode 100644
index 7e1d46f..0000000
--- a/board/atmel/at91sam9263ek/partition.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 2bb5870..e69470f 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91sam9263ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9g10ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
at91sam9261ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91rm9200dk arm arm920t - 2011-07-17
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
deleted file mode 100644
index f6cb406..0000000
--- a/include/configs/at91sam9263ek.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91SAM9263EK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
-#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_BGR555 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* the power led */
-#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 29 /* the user2 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash, if populated */
-#ifdef CONFIG_SYS_USE_NORFLASH
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_SYS_MONITOR_SEC 1:0-3
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000
-
-#define xstr(s) str(s)
-#define str(s) #s
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "monitor_base=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
- "update=" \
- "protect off ${monitor_base} +${filesize};" \
- "erase ${monitor_base} +${filesize};" \
- "cp.b ${load_addr} ${monitor_base} ${filesize};" \
- "protect on ${monitor_base} +${filesize}\0"
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define MASTER_PLL_MUL 171
-#define MASTER_PLL_DIV 14
-#define MASTER_PLL_OUT 3
-
-/* clocks */
-#define CONFIG_SYS_MOR_VAL \
- (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
-#define CONFIG_SYS_PLLAR_VAL \
- (AT91_PMC_PLLAR_29 | \
- AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
- AT91_PMC_PLLXR_PLLCOUNT(63) | \
- AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
- AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define CONFIG_SYS_MCKR1_VAL \
- (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2)
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2)
-
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
-/* no pull-up for D[31:16] */
-#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
-/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBICSA_VAL \
- (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
- AT91_MATRIX_CSA_EBI_CS1A)
-
-/* SDRAM */
-/* SDRAMC_MR Mode register */
-#define CONFIG_SYS_SDRC_MR_VAL1 0
-/* SDRAMC_TR - Refresh Timer register */
-#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
-/* SDRAMC_CR - Configuration register*/
-#define CONFIG_SYS_SDRC_CR_VAL \
- (AT91_SDRAMC_NC_9 | \
- AT91_SDRAMC_NR_13 | \
- AT91_SDRAMC_NB_4 | \
- AT91_SDRAMC_CAS_3 | \
- AT91_SDRAMC_DBW_32 | \
- (1 << 8) | /* Write Recovery Delay */ \
- (7 << 12) | /* Row Cycle Delay */ \
- (2 << 16) | /* Row Precharge Delay */ \
- (2 << 20) | /* Row to Column Delay */ \
- (5 << 24) | /* Active to Precharge Delay */ \
- (1 << 28)) /* Exit Self Refresh to Active Delay */
-
-/* Memory Device Register -> SDRAM */
-#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
-#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
-#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
-#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
-#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
-#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
-
-/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
- AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
-#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
- AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
-#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
-#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
- AT91_SMC_MODE_DBW_16 | \
- AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL \
- (AT91_RSTC_KEY | \
- AT91_RSTC_MR_URSTEN | \
- AT91_RSTC_MR_ERSTL(15))
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL \
- (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
- AT91_WDT_MR_WDV(0xfff) | \
- AT91_WDT_MR_WDDIS | \
- AT91_WDT_MR_WDD(0xfff))
-
-#endif
-
-#else
-#define CONFIG_SYS_NO_FLASH 1
-#endif
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
-/*
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
-*/
-
-
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) "\
- "rw rootfstype=jffs2"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 48/52] ARM: remove broken "at91sam9263ek" board
2011-07-17 22:17 ` [U-Boot] [PATCH 48/52] ARM: remove broken "at91sam9263ek" board Wolfgang Denk
@ 2011-08-02 19:11 ` Reinhard Meyer
0 siblings, 0 replies; 90+ messages in thread
From: Reinhard Meyer @ 2011-08-02 19:11 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
> ---
> MAINTAINERS | 1 -
> MAKEALL | 1 -
> Makefile | 19 --
> board/atmel/at91sam9263ek/Makefile | 56 -----
> board/atmel/at91sam9263ek/at91sam9263ek.c | 297 ------------------------
> board/atmel/at91sam9263ek/config.mk | 1 -
> board/atmel/at91sam9263ek/led.c | 47 ----
> board/atmel/at91sam9263ek/partition.c | 39 ----
> doc/README.scrapyard | 1 +
> include/configs/at91sam9263ek.h | 350 -----------------------------
> 10 files changed, 1 insertions(+), 811 deletions(-)
> delete mode 100644 board/atmel/at91sam9263ek/Makefile
> delete mode 100644 board/atmel/at91sam9263ek/at91sam9263ek.c
> delete mode 100644 board/atmel/at91sam9263ek/config.mk
> delete mode 100644 board/atmel/at91sam9263ek/led.c
> delete mode 100644 board/atmel/at91sam9263ek/partition.c
> delete mode 100644 include/configs/at91sam9263ek.h
Board Fixed. Patch not applicable any more.
Thanks,
Reinhard
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 49/52] ARM: remove broken "at91sam9m10g45ek" / "at91sam9g45ekes" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (47 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 48/52] ARM: remove broken "at91sam9263ek" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 50/52] ARM: remove broken "at91sam9rlek" board Wolfgang Denk
` (4 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 3 -
MAKEALL | 1 -
Makefile | 21 --
board/atmel/at91sam9m10g45ek/Makefile | 55 ----
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 340 -----------------------
board/atmel/at91sam9m10g45ek/config.mk | 1 -
board/atmel/at91sam9m10g45ek/led.c | 41 ---
doc/README.scrapyard | 2 +
include/configs/at91sam9m10g45ek.h | 226 ---------------
9 files changed, 2 insertions(+), 688 deletions(-)
delete mode 100644 board/atmel/at91sam9m10g45ek/Makefile
delete mode 100644 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk
delete mode 100644 board/atmel/at91sam9m10g45ek/led.c
delete mode 100644 include/configs/at91sam9m10g45ek.h
diff --git a/MAINTAINERS b/MAINTAINERS
index e5a22ee..f2a8bcb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -629,9 +629,6 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
otc570 ARM926EJS (AT91SAM9263 SoC)
-Sedji Gaouaou<sedji.gaouaou@atmel.com>
- at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
-
Simon Guinot <simon.guinot@sequanux.org>
inetspace_v2 ARM926EJS (Kirkwood SoC)
diff --git a/MAKEALL b/MAKEALL
index c1b5b58..2d3d046 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -395,7 +395,6 @@ LIST_at91="$(boards_by_soc at91)\
$(boards_by_soc at91rm9200)\
at91sam9260ek \
at91sam9g20ek \
- at91sam9m10g45ek \
at91sam9rlek \
pm9g45 \
SBC35_A9G20 \
diff --git a/Makefile b/Makefile
index 0a2ed8e..71a08b0 100644
--- a/Makefile
+++ b/Makefile
@@ -808,27 +808,6 @@ at91sam9rlek_config : unconfig
fi;
@$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
-at91sam9m10g45ek_nandflash_config \
-at91sam9m10g45ek_dataflash_config \
-at91sam9m10g45ek_dataflash_cs0_config \
-at91sam9m10g45ek_config \
-at91sam9g45ekes_nandflash_config \
-at91sam9g45ekes_dataflash_config \
-at91sam9g45ekes_dataflash_cs0_config \
-at91sam9g45ekes_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring 9m10,$@)" ] ; then \
- echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-
pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
deleted file mode 100644
index 7aa2521..0000000
--- a/board/atmel/at91sam9m10g45ek/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91sam9m10g45ek.o
-COBJS-y += led.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
deleted file mode 100644
index f92b20f..0000000
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/sizes.h>
-#include <asm/arch/at91sam9g45.h>
-#include <asm/arch/at91sam9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void at91sam9m10g45ek_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(3));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_CMD_USB
-static void at91sam9m10g45ek_usb_hw_init(void)
-{
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
-
- at91_set_gpio_output(AT91_PIN_PD1, 0);
- at91_set_gpio_output(AT91_PIN_PD3, 0);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91sam9m10g45ek_macb_hw_init(void)
-{
- unsigned long rstc;
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PA15) => PHY normal mode (not Test mode)
- * ERX0 (PA12) => PHY ADDR0
- * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA12) |
- pin_to_mask(AT91_PIN_PA13),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- rstc = at91_sys_read(AT91_RSTC_MR);
-
- /* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
-
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
- /* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
- /* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (rstc) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA12) |
- pin_to_mask(AT91_PIN_PA13),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
- at91_macb_hw_init();
-}
-#endif
-
-#ifdef CONFIG_LCD
-
-vidinfo_t panel_info = {
- vl_col: 480,
- vl_row: 272,
- vl_clk: 9000000,
- vl_sync: ATMEL_LCDC_INVLINE_NORMAL |
- ATMEL_LCDC_INVFRAME_NORMAL,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 45,
- vl_left_margin: 1,
- vl_right_margin:1,
- vl_vsync_len: 1,
- vl_upper_margin:40,
- vl_lower_margin:1,
- mmio: AT91SAM9G45_LCDC_BASE,
-};
-
-
-void lcd_enable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */
-}
-
-static void at91sam9m10g45ek_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
-
- at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
-
- gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91SAM9M10G45EK-Board */
-#ifdef CONFIG_AT91SAM9M10G45EK
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
-#elif defined CONFIG_AT91SAM9G45EKES
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
-#endif
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91sam9m10g45ek_nand_hw_init();
-#endif
-#ifdef CONFIG_CMD_USB
- at91sam9m10g45ek_usb_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4);
-#endif
-
-#ifdef CONFIG_MACB
- at91sam9m10g45ek_macb_hw_init();
-#endif
-
-#ifdef CONFIG_LCD
- at91sam9m10g45ek_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs < 2;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- switch(slave->cs) {
- case 1:
- at91_set_gpio_output(AT91_PIN_PB18, 0);
- break;
- case 0:
- default:
- at91_set_gpio_output(AT91_PIN_PB3, 0);
- break;
- }
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- switch(slave->cs) {
- case 1:
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- break;
- case 0:
- default:
- at91_set_gpio_output(AT91_PIN_PB3, 1);
- break;
- }
-}
-#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk
deleted file mode 100644
index 9d3c5ae..0000000
--- a/board/atmel/at91sam9m10g45ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73f00000
diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c
deleted file mode 100644
index ff59a2d..0000000
--- a/board/atmel/at91sam9m10g45ek/led.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9g45.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
-
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-
- at91_set_gpio_value(CONFIG_RED_LED, 0);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-}
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e69470f..56cb8b6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,8 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91sam9g45ekes arm arm926ejs - 2011-07-17
+at91sam9m10g45ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
at91sam9263ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9g10ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
at91sam9261ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
deleted file mode 100644
index de74dcf..0000000
--- a/include/configs/at91sam9m10g45ek.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#ifdef CONFIG_AT91SAM9M10G45EK
-#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/
-#else
-#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/
-#endif
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_RGB565 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-/* board specific(not enough SRAM) */
-#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
-#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_LOADS
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x70000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-
-/* DataFlash */
-#ifdef CONFIG_ATMEL_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH 1
-#define CONFIG_SPI_FLASH_ATMEL 1
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#endif
-
-/* NOR flash, if populated */
-#ifndef CONFIG_CMD_NAND
-#define CONFIG_SYS_NO_FLASH 1
-#else
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#endif
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MAX_CHIPS 1
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
-
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
-#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) "\
- "rw rootfstype=jffs2"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro, \
- 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
- 2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 50/52] ARM: remove broken "at91sam9rlek" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (48 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 49/52] ARM: remove broken "at91sam9m10g45ek" / "at91sam9g45ekes" boards Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-08-01 14:11 ` Reinhard Meyer
2011-07-17 22:17 ` [U-Boot] [PATCH 51/52] ARM: remove broken "SBC35_A9G20" board Wolfgang Denk
` (3 subsequent siblings)
53 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
---
MAINTAINERS | 1 -
MAKEALL | 1 -
Makefile | 12 --
board/atmel/at91sam9rlek/Makefile | 56 ---------
board/atmel/at91sam9rlek/at91sam9rlek.c | 205 -------------------------------
board/atmel/at91sam9rlek/config.mk | 1 -
board/atmel/at91sam9rlek/led.c | 43 -------
board/atmel/at91sam9rlek/partition.c | 39 ------
doc/README.scrapyard | 1 +
include/configs/at91sam9rlek.h | 185 ----------------------------
10 files changed, 1 insertions(+), 543 deletions(-)
delete mode 100644 board/atmel/at91sam9rlek/Makefile
delete mode 100644 board/atmel/at91sam9rlek/at91sam9rlek.c
delete mode 100644 board/atmel/at91sam9rlek/config.mk
delete mode 100644 board/atmel/at91sam9rlek/led.c
delete mode 100644 board/atmel/at91sam9rlek/partition.c
delete mode 100644 include/configs/at91sam9rlek.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f2a8bcb..b5ac5e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -739,7 +739,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
- at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Tom Rix <Tom.Rix@windriver.com>
diff --git a/MAKEALL b/MAKEALL
index 2d3d046..e1c59aa 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -395,7 +395,6 @@ LIST_at91="$(boards_by_soc at91)\
$(boards_by_soc at91rm9200)\
at91sam9260ek \
at91sam9g20ek \
- at91sam9rlek \
pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
diff --git a/Makefile b/Makefile
index 71a08b0..901528c 100644
--- a/Makefile
+++ b/Makefile
@@ -796,18 +796,6 @@ M5485HFE_config : unconfig
## ARM926EJ-S Systems
#########################################################################
-at91sam9rlek_nandflash_config \
-at91sam9rlek_dataflash_config \
-at91sam9rlek_dataflash_cs0_config \
-at91sam9rlek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
-
pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile
deleted file mode 100644
index 234aeb6..0000000
--- a/board/atmel/at91sam9rlek/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91sam9rlek.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
deleted file mode 100644
index e374917..0000000
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void at91sam9rlek_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(2));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-
- at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91SAM9RL_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
-}
-static void at91sam9rlek_lcd_hw_init(void)
-{
- at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
- at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
- at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
- at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
- at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
- at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
- at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
-
- gd->fb_base = 0;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91SAM9RLEK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91sam9rlek_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_LCD
- at91sam9rlek_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9rlek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
deleted file mode 100644
index 9634cc0..0000000
--- a/board/atmel/at91sam9rlek/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
-
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
- at91_set_gpio_value(CONFIG_RED_LED, 0);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
deleted file mode 100644
index 7e1d46f..0000000
--- a/board/atmel/at91sam9rlek/partition.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 56cb8b6..5d3c36a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91sam9rlek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9g45ekes arm arm926ejs - 2011-07-17
at91sam9m10g45ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
at91sam9263ek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
deleted file mode 100644
index 8dbd082..0000000
--- a/include/configs/at91sam9rlek.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91SAM9RLEK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
-#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_RGB565 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_USB
-
-#define CONFIG_CMD_NAND 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash - not present */
-#define CONFIG_SYS_NO_FLASH 1
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
-
-#endif
-
-/* Ethernet - not present */
-
-/* USB - not supported */
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) "\
- "rw rootfstype=jffs2"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 51/52] ARM: remove broken "SBC35_A9G20" board
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (49 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 50/52] ARM: remove broken "at91sam9rlek" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-17 22:17 ` [U-Boot] [PATCH 52/52] ARM: remove broken "tny_a9260" / "tny_a9g20" boards Wolfgang Denk
` (2 subsequent siblings)
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 1 -
MAKEALL | 1 -
Makefile | 7 -
board/calao/sbc35_a9g20/Makefile | 55 ---------
board/calao/sbc35_a9g20/config.mk | 1 -
board/calao/sbc35_a9g20/sbc35_a9g20.c | 190 --------------------------------
board/calao/sbc35_a9g20/spi.c | 57 ----------
doc/README.scrapyard | 1 +
include/configs/sbc35_a9g20.h | 195 ---------------------------------
9 files changed, 1 insertions(+), 507 deletions(-)
delete mode 100644 board/calao/sbc35_a9g20/Makefile
delete mode 100644 board/calao/sbc35_a9g20/config.mk
delete mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c
delete mode 100644 board/calao/sbc35_a9g20/spi.c
delete mode 100644 include/configs/sbc35_a9g20.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b5ac5e1..659d021 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -793,7 +793,6 @@ Nick Thompson <nick.thompson@gefanuc.com>
Albin Tonnerre <albin.tonnerre@free-electrons.com>
- sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC)
tny_a9260 ARM926EJS (AT91SAM9260 SoC)
tny_a9g20 ARM926EJS (AT91SAM9G20 SoC)
diff --git a/MAKEALL b/MAKEALL
index e1c59aa..2c04e1f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -396,7 +396,6 @@ LIST_at91="$(boards_by_soc at91)\
at91sam9260ek \
at91sam9g20ek \
pm9g45 \
- SBC35_A9G20 \
TNY_A9260 \
TNY_A9G20 \
"
diff --git a/Makefile b/Makefile
index 901528c..fb742c0 100644
--- a/Makefile
+++ b/Makefile
@@ -800,13 +800,6 @@ pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
-SBC35_A9G20_NANDFLASH_config \
-SBC35_A9G20_EEPROM_config \
-SBC35_A9G20_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
-
TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9G20_config \
diff --git a/board/calao/sbc35_a9g20/Makefile b/board/calao/sbc35_a9g20/Makefile
deleted file mode 100644
index cc4219d..0000000
--- a/board/calao/sbc35_a9g20/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += sbc35_a9g20.o
-COBJS-$(CONFIG_ATMEL_SPI) += spi.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/calao/sbc35_a9g20/config.mk b/board/calao/sbc35_a9g20/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/calao/sbc35_a9g20/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
deleted file mode 100644
index 9df45c0..0000000
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free-Electrons <albin.tonnerre@free-electrons.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void sbc35_a9g20_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(2));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void sbc35_a9g20_macb_hw_init(void)
-{
- unsigned long rstc;
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PA17) => PHY normal mode (not Test mode)
- * ERX0 (PA14) => PHY ADDR0
- * ERX1 (PA15) => PHY ADDR1
- * ERX2 (PA25) => PHY ADDR2
- * ERX3 (PA26) => PHY ADDR3
- * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
-
- /* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
-
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
- /* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
- /* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (rstc) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
- at91_macb_hw_init();
-}
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- gd->bd->bi_arch_number = MACH_TYPE_SBC35_A9G20;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
- sbc35_a9g20_nand_hw_init();
-#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4 | 1 << 5);
-#endif
-#ifdef CONFIG_MACB
- sbc35_a9g20_macb_hw_init();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE)
- return -1;
-
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
diff --git a/board/calao/sbc35_a9g20/spi.c b/board/calao/sbc35_a9g20/spi.c
deleted file mode 100644
index 1057fa2..0000000
--- a/board/calao/sbc35_a9g20/spi.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_spi.h>
-#include <asm/arch/gpio.h>
-#include <spi.h>
-
-#define SBC_A9260_CS0_PIN AT91_PIN_PA3
-#define SBC_A9260_CS1_PIN AT91_PIN_PC11
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && (cs == 1 || cs == 0);
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- if(slave->cs == 0)
- at91_set_gpio_value(SBC_A9260_CS0_PIN, 0);
- else if(slave->cs == 1)
- at91_set_gpio_value(SBC_A9260_CS1_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- if(slave->cs == 0)
- at91_set_gpio_value(SBC_A9260_CS0_PIN, 1);
- else if(slave->cs == 1)
- at91_set_gpio_value(SBC_A9260_CS1_PIN, 1);
-}
-
-void spi_init_f(void)
-{
- /* everything done in board_init */
-}
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5d3c36a..149b151 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+sbc35_a9g20 arm arm926ejs - 2011-07-17 Albin Tonnerre <albin.tonnerre@free-electrons.com>
at91sam9rlek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9g45ekes arm arm926ejs - 2011-07-17
at91sam9m10g45ek arm arm926ejs - 2011-07-17 Sedji Gaouaou<sedji.gaouaou@atmel.com>
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
deleted file mode 100644
index 00f4dc9..0000000
--- a/include/configs/sbc35_a9g20.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * Configuation settings for the Calao SBC35-A9G20 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-#if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM)
-#define CONFIG_SBC35_A9G20
-#endif
-
-#define CONFIG_AT91SAM9G20
-
-#if defined(CONFIG_SBC35_A9G20_NANDFLASH)
-#define CONFIG_ENV_IS_IN_NAND
-#else
-#define CONFIG_ENV_IS_IN_EEPROM
-#endif
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#undef CONFIG_USART3
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* SPI EEPROM */
-#define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SPI_M95XXX
-#define CONFIG_SYS_EEPROM_SIZE 0x10000
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-
-/* SPI RTC */
-#define CONFIG_CMD_DATE
-#define CONFIG_RTC_M41T94
-#define CONFIG_M41T94_SPI_BUS 0
-#define CONFIG_M41T94_SPI_CS 0
-
-/* NAND flash */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH 1
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-#define CONFIG_MACB_SEARCH_PHY 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-/* Env in EEPROM, bootstrap + u-boot in NAND*/
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 0x20
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-
-/* Env, bootstrap and u-boot in NAND */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000
-#endif
-
-#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=atmel_nand:16M(kernel)ro," \
- "120M(rootfs),-(other) " \
- "rw rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 52/52] ARM: remove broken "tny_a9260" / "tny_a9g20" boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (50 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 51/52] ARM: remove broken "SBC35_A9G20" board Wolfgang Denk
@ 2011-07-17 22:17 ` Wolfgang Denk
2011-07-18 9:51 ` [U-Boot] [PATCH 00/52] ARM: remove broken boards Albert ARIBAUD
2011-07-19 13:29 ` Reinhard Meyer
53 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-17 22:17 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
---
MAINTAINERS | 5 -----
MAKEALL | 2 --
Makefile | 10 ----------
doc/README.scrapyard | 2 ++
4 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 659d021..7db1726 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -791,11 +791,6 @@ Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
-Albin Tonnerre <albin.tonnerre@free-electrons.com>
-
- tny_a9260 ARM926EJS (AT91SAM9260 SoC)
- tny_a9g20 ARM926EJS (AT91SAM9G20 SoC)
-
Greg Ungerer <greg.ungerer@opengear.com>
cm4008 ks8695p
diff --git a/MAKEALL b/MAKEALL
index 2c04e1f..fe85e49 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -396,8 +396,6 @@ LIST_at91="$(boards_by_soc at91)\
at91sam9260ek \
at91sam9g20ek \
pm9g45 \
- TNY_A9260 \
- TNY_A9G20 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index fb742c0..493a6a6 100644
--- a/Makefile
+++ b/Makefile
@@ -800,16 +800,6 @@ pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
-TNY_A9G20_NANDFLASH_config \
-TNY_A9G20_EEPROM_config \
-TNY_A9G20_config \
-TNY_A9260_NANDFLASH_config \
-TNY_A9260_EEPROM_config \
-TNY_A9260_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
-
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 149b151..662b464 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,8 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+tny_a9g20 arm arm926ejs - 2011-07-17 Albin Tonnerre <albin.tonnerre@free-electrons.com>
+tny_a9260 arm arm926ejs - 2011-07-17 Albin Tonnerre <albin.tonnerre@free-electrons.com>
sbc35_a9g20 arm arm926ejs - 2011-07-17 Albin Tonnerre <albin.tonnerre@free-electrons.com>
at91sam9rlek arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9g45ekes arm arm926ejs - 2011-07-17
--
1.7.6
^ permalink raw reply related [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 00/52] ARM: remove broken boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (51 preceding siblings ...)
2011-07-17 22:17 ` [U-Boot] [PATCH 52/52] ARM: remove broken "tny_a9260" / "tny_a9g20" boards Wolfgang Denk
@ 2011-07-18 9:51 ` Albert ARIBAUD
2011-07-18 12:08 ` Wolfgang Denk
2011-07-19 13:29 ` Reinhard Meyer
53 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 9:51 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Le 18/07/2011 00:16, Wolfgang Denk a ?crit :
> Dear Albert,
>
> as announced a number of times before, the following patch series
> removes a number of ARM boards that have been left unmaintained and
> broken for a long time.
Generic question: since this patch arrived on july 18th, past the merge
window closing time, I assume it is now intended for the ARM next
branch, i.e. it will not be applied to the 2011-09 release. Or do you
expect it to?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 00/52] ARM: remove broken boards
2011-07-18 9:51 ` [U-Boot] [PATCH 00/52] ARM: remove broken boards Albert ARIBAUD
@ 2011-07-18 12:08 ` Wolfgang Denk
2011-07-18 12:35 ` Albert ARIBAUD
0 siblings, 1 reply; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 12:08 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E24020B.4030404@aribaud.net> you wrote:
>
> Generic question: since this patch arrived on july 18th, past the merge
> window closing time, I assume it is now intended for the ARM next
> branch, i.e. it will not be applied to the 2011-09 release. Or do you
> expect it to?
It took me longer to prepare this series, as I actually waited for the
last day of the merge window for any fixes to come in.
I consider these patches as bug fixes, which should still be accepted
in the first days / weeks after closing the merge window. So please
include these patches into the upcoming release, as we announced a
number of times before.
Please note that I may send another batch of removal patches -
depending if we receive any input / comments / fixes from Reinhard.
These should also go in, then.
My goal is the have none of these old build issues for the final
release.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The use of COBOL cripples the mind; its teaching should, therefore,
be regarded as a criminal offence.
-- Edsger W. Dijkstra, SIGPLAN Notices, Volume 17, Number 5
^ permalink raw reply [flat|nested] 90+ messages in thread* [U-Boot] [PATCH 00/52] ARM: remove broken boards
2011-07-18 12:08 ` Wolfgang Denk
@ 2011-07-18 12:35 ` Albert ARIBAUD
2011-07-18 13:45 ` Wolfgang Denk
0 siblings, 1 reply; 90+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 12:35 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Le 18/07/2011 14:08, Wolfgang Denk a ?crit :
> Dear Albert ARIBAUD,
>
> In message<4E24020B.4030404@aribaud.net> you wrote:
>>
>> Generic question: since this patch arrived on july 18th, past the merge
>> window closing time, I assume it is now intended for the ARM next
>> branch, i.e. it will not be applied to the 2011-09 release. Or do you
>> expect it to?
>
> It took me longer to prepare this series, as I actually waited for the
> last day of the merge window for any fixes to come in.
Same as I did for the UTF-8 patch -- would it qualify as a bugfix? :)
> I consider these patches as bug fixes, which should still be accepted
> in the first days / weeks after closing the merge window. So please
> include these patches into the upcoming release, as we announced a
> number of times before.
>
> Please note that I may send another batch of removal patches -
> depending if we receive any input / comments / fixes from Reinhard.
> These should also go in, then.
>
> My goal is the have none of these old build issues for the final
> release.
Understood. Of course, I will only apply those patches in the series for
which no valid board build bugfix patches are posted in the first
days/weeks after closing the merge window.
> Best regards,
>
> Wolfgang Denk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 00/52] ARM: remove broken boards
2011-07-18 12:35 ` Albert ARIBAUD
@ 2011-07-18 13:45 ` Wolfgang Denk
0 siblings, 0 replies; 90+ messages in thread
From: Wolfgang Denk @ 2011-07-18 13:45 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E242883.5040301@aribaud.net> you wrote:
>
> > It took me longer to prepare this series, as I actually waited for the
> > last day of the merge window for any fixes to come in.
>
> Same as I did for the UTF-8 patch -- would it qualify as a bugfix? :)
It has caused enough grief, so yes.
> Understood. Of course, I will only apply those patches in the series for
> which no valid board build bugfix patches are posted in the first
> days/weeks after closing the merge window.
You mean I don't even have to keep track myself? That's just great!
:-)
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"He was so narrow minded he could see through a keyhole with both
eyes ..."
^ permalink raw reply [flat|nested] 90+ messages in thread
* [U-Boot] [PATCH 00/52] ARM: remove broken boards
2011-07-17 22:16 [U-Boot] [PATCH 00/52] ARM: remove broken boards Wolfgang Denk
` (52 preceding siblings ...)
2011-07-18 9:51 ` [U-Boot] [PATCH 00/52] ARM: remove broken boards Albert ARIBAUD
@ 2011-07-19 13:29 ` Reinhard Meyer
53 siblings, 0 replies; 90+ messages in thread
From: Reinhard Meyer @ 2011-07-19 13:29 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
> Reinhard:
>
> There are a number of additional AT91 based boards that are currently
> broken. Some bail out in drivers/mtd/cfi_flash.c dure to undefined
> references to `reset_timer' (cpu9260, cpu9G20, ...), some due to
> "asm/arch/io.h: No such file or directory" errors (pm9261, ...), some
> because of "error: 'AT91_PMC_BASE' undeclared" etc. (pm9261, pm9263),
> etc. etc.
>
> As these errors look a bit different to me I did not include these
> board into the removal yet. Please comment if there is hope to see
> these fixes in the next 2...3 days, otherwise I can submit removal
> patches for them as well. Thanks.
I am extremely occupied with work right now, also there is a planned
holiday ahead, so right now I cannot continue with the rework effort
for 9261 etc. fast enough to meet given deadlines.
An option is, of course, that someone else might volunteer as Atmel
custodian...
Best Regards,
Reinhard
^ permalink raw reply [flat|nested] 90+ messages in thread