[U-Boot] Please Pull u-boot-ti/master

[U-Boot] Please Pull u-boot-ti/master

[s-paulraj at ti.com]

Albert,

Please pull u-boot-ti/master. I am working on some other patches from
Aneesh as well. I will send a pull request for that as well as
remaining u-boot-ti patches in due course of time.

Regards,
Sandeep
	
The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
  Ramneek Mehresh (1):
        powerpc/85xx: Add default usb mode and phy type to hwconfig

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

Laurence Withers (6):
      DaVinci: rename gpio_defs.h to gpio.h
      DA8xx: add generic GPIO driver
      DaVinci EMAC: declare function for all DA8xx CPUs
      DA8xx: add MMC/SD controller addresses
      DA8xx: switch an enum to defines for consistency
      DA8xx: fix LPSC constants

Sanjeev Premi (3):
      omap3: Include array definition only when it is used
      omap3evm: eth: split function setup_net_chip
      omap3evm: eth: Include functions only when necessary

Sriramakrishnan (1):
      omap3evm: Update ethernet reset sequence for Rev.G board

Yegor Yefremov (1):
      am3517evm: change console device from ttyS2 to ttyO2

 arch/arm/cpu/armv7/omap3/sys_info.c                |    3 +
 arch/arm/include/asm/arch-davinci/davinci_misc.h   |    2 +-
 .../asm/arch-davinci/{gpio_defs.h => gpio.h}       |    8 +
 arch/arm/include/asm/arch-davinci/hardware.h       |  102 +++++---
 board/davinci/dm355leopard/dm355leopard.c          |    2 +-
 board/davinci/dm365evm/dm365evm.c                  |    2 +-
 board/ti/evm/evm.c                                 |   45 +++-
 board/ti/evm/evm.h                                 |    1 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/da8xx_gpio.c                          |  281 ++++++++++++++++++++
 drivers/usb/musb/da8xx.h                           |    2 +-
 include/configs/am3517_evm.h                       |    2 +-
 12 files changed, 397 insertions(+), 54 deletions(-)
 rename arch/arm/include/asm/arch-davinci/{gpio_defs.h => gpio.h} (90%)
 create mode 100644 drivers/gpio/da8xx_gpio.c

[U-Boot] Please Pull u-boot-ti/master (see note)

[Albert ARIBAUD]

(sorry Sandeep for the duplicate)

Le 18/07/2011 16:07, s-paulraj at ti.com a ?crit :
> Albert,
>
> Please pull u-boot-ti/master. I am working on some other patches from
> Aneesh as well. I will send a pull request for that as well as
> remaining u-boot-ti patches in due course of time.
>
> Regards,
> Sandeep
> 	
> The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
>    Ramneek Mehresh (1):
>          powerpc/85xx: Add default usb mode and phy type to hwconfig
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master

Applied to u-boot-arm/master, thanks! --except for:

> Yegor Yefremov (1):
>       am3517evm: change console device from ttyS2 to ttyO2

... which I had already applied, see 
<http://www.mail-archive.com/u-boot@lists.denx.de/msg56644.html>.

Note that u-boot-ti still has a tag, "2009.01-rc2", which should be 
removed from the repository, see 
<http://www.mail-archive.com/u-boot@lists.denx.de/msg51721.html>.

(there is also a "NIOS2-5_0_0" tag which I am not sure of;maybe it 
should be removed too)

Amicalement,
-- 
Albert.

[U-Boot] Please Pull u-boot-ti/master (see note)

[Paulraj, Sandeep]

> 
> Note that u-boot-ti still has a tag, "2009.01-rc2", which should be
> removed from the repository, see
> <http://www.mail-archive.com/u-boot@lists.denx.de/msg51721.html>.
> 
> (there is also a "NIOS2-5_0_0" tag which I am not sure of;maybe it
> should be removed too)
> 
Albert,

I regularly rebase with mainline u-boot and these tags are present in mainline u-boot I believe. This is how I have the tags in my repository.

Regards,
Sandeep

[U-Boot] Please Pull u-boot-ti/master (see note, custodians please read )

[Albert ARIBAUD]

(to : ARM custodians, for action)
(cc: Wolfgang and Scott, for info)

Hi Sandeep,

Le 19/07/2011 17:22, Paulraj, Sandeep a ?crit :
>
>
>>
>> Note that u-boot-ti still has a tag, "2009.01-rc2", which should be
>> removed from the repository, see
>> <http://www.mail-archive.com/u-boot@lists.denx.de/msg51721.html>.
>>
>> (there is also a "NIOS2-5_0_0" tag which I am not sure of;maybe it
>> should be removed too)
>>
> Albert,
>
> I regularly rebase with mainline u-boot and these tags are present in mainline u-boot I believe. This is how I have the tags in my repository.

Actually no, they are not in mainline any more, that's the point of the 
mail I referred you to.

I have just cloned a fresh u-boot, and neither "2009.01-rc2" nor 
"NIOS2-5_0_0" are in there. The latter was still in u-boot-arm, and 
there being no reason for it there, I just removed it by 'git push -f 
ssh://gu-arm at git.denx.de/u-boot-arm :NIOS2-5_0_0'

Note that both spurious tags are also present in u-boot-atmel, 
u-boot-imx, u-boot-marvell, u-boot-pxa, and u-boot-samsung (and possibly 
others? I only checked the ones I have as remotes) -- custodians added 
in To: list. Both should be removed, as the NIOS tag should appear only 
in Scott's u-boot-nios repository (Scott CC:ed for info).

Note: rebasing your repo will not 'pull tag removals', i.e. if a tag is 
removed from a remote it will not automatically be removed from your 
local repo, and besides, if you remove it locally it will not be removed 
from your official repo on the denx server unless you explicitly tell 
'git push' to do it, like I did. To make sure you are completely rid of 
a tag, you have to do both a 'git tag -d TAGTOREMOVE' for local removal, 
and a 'git push ... :TAGTOREMOVE' (or use 'git push --mirror' or 'git 
push --delete', with care)

> Regards,
> Sandeep

Amicalement,
-- 
Albert.