From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/7] OMAP3: mvblx: Initial support for mvBlueLYNX-X
Date: Wed, 27 Jul 2011 12:57:48 +0300 [thread overview]
Message-ID: <4E2FE11C.9040309@compulab.co.il> (raw)
In-Reply-To: <1311001208-8167-1-git-send-email-michael.jones@matrix-vision.de>
Hi Michael,
On 07/18/11 18:00, Michael Jones wrote:
> Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based
> intelligent camera.
>
> Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
> ---
> Changes for v2:
> - None. Resubmitting to include custodian in cc:
[...]
> new file mode 100644
> index 0000000..1b8a005
> --- /dev/null
> +++ b/board/matrix_vision/mvblx/mvblx.c
[...]
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> + /* board id for Linux */
> + gd->bd->bi_arch_number = MACH_TYPE_MVBLX;
This should be done in the board config file.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
--
Regards,
Igor.
next prev parent reply other threads:[~2011-07-27 9:57 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 9:09 [U-Boot] [PATCH 0/7] OMAP3: Add support for mvBlueLYNX-X Michael Jones
2011-07-15 9:09 ` [U-Boot] [PATCH 1/7] fpga: add #define for Altera Cyclone EP3C5 Michael Jones
2011-07-28 14:46 ` Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 2/7] fpga: support FPP Cyclone configuration Michael Jones
2011-07-28 14:47 ` Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 3/7] ARMV7: OMAP3: Add 37xx ESx revision numbers Michael Jones
2011-07-18 14:36 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-15 9:09 ` [U-Boot] [PATCH 4/7] mmc: rescan fails on empty slot Michael Jones
2011-07-18 14:40 ` [U-Boot] [PATCH v2 " Michael Jones
2011-08-17 2:15 ` Andy Fleming
2011-08-17 2:30 ` Andy Fleming
2011-08-17 7:46 ` Michael Jones
2011-07-19 2:06 ` [U-Boot] [PATCH " Jaehoon Chung
2011-07-20 8:51 ` Michael Jones
2011-07-20 9:52 ` Jaehoon Chung
2011-07-15 9:09 ` [U-Boot] [PATCH 5/7] mv_common.c: don't compile reset_environment if ENV_IS_NOWHERE Michael Jones
2011-07-18 14:45 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-28 14:49 ` Wolfgang Denk
2011-07-18 17:39 ` [U-Boot] [PATCH " Mike Frysinger
2011-07-15 9:09 ` [U-Boot] [PATCH 6/7] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write Michael Jones
2011-07-18 14:58 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-27 6:07 ` Heiko Schocher
2011-07-27 7:42 ` Michael Jones
2011-07-27 7:53 ` Heiko Schocher
2011-07-27 12:41 ` [U-Boot] [PATCH v3] " Michael Jones
2011-07-27 12:41 ` [U-Boot] [PATCH] ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible Michael Jones
2011-08-01 9:12 ` [U-Boot] [PATCH v3] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write Heiko Schocher
2011-08-01 10:14 ` [U-Boot] [PATCH v4] " Michael Jones
2011-08-02 6:37 ` Heiko Schocher
2011-09-04 17:59 ` Paulraj, Sandeep
2011-09-05 5:34 ` Heiko Schocher
2011-07-27 21:00 ` [U-Boot] [PATCH v2 6/7] " Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 7/7] OMAP3: mvblx: Initial support for mvBlueLYNX-X Michael Jones
2011-07-18 15:00 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-27 9:57 ` Igor Grinberg [this message]
2011-08-04 13:46 ` [U-Boot] [PATCH v3] " Michael Jones
2011-10-06 22:06 ` Wolfgang Denk
2011-08-17 8:55 ` [U-Boot] [PATCH v4] " Michael Jones
2011-10-06 21:51 ` Wolfgang Denk
2011-10-07 9:06 ` Michael Jones
2011-10-09 19:59 ` Wolfgang Denk
2011-10-05 15:08 ` [U-Boot] [PATCH v5] " Michael Jones
2011-10-10 15:08 ` [U-Boot] [PATCH v6] " Michael Jones
2011-10-18 17:31 ` [U-Boot] [PATCH v5] " Tom Rini
2011-10-19 8:16 ` Michael Jones
2011-10-20 11:37 ` [U-Boot] [PATCH] mv_common.c: get rid of 'defined but not used' warning Michael Jones
2011-10-20 11:48 ` Andre Schwarz
2011-12-03 12:32 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2FE11C.9040309@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox