[U-Boot] [PATCH V6 1/5] omap3: Configure RAM bank 0 if in SPL

[Aneesh V <aneesh@ti.com>]

Hi Simon,

First of all sorry for giving my first comments on v6. But I didn't
have mail access for the last couple of days.

On Thursday 28 July 2011 02:08 PM, Simon Schwarz wrote:
> OMAP3 relied on the memory config done by X-loader or Configuration Header. This
> has to be reworked for the implementation of a SPL. This patch configures RAM
> bank 0 if CONFIG_SPL_BUILD is set. Settings for Micron-RAM used by devkit8000
> are added to mem.h
>
> Signed-off-by: Simon Schwarz<simonschwarzcor@gmail.com>
> ---
> V1 changes:
> ADD Settings for Micron RAM
>
> V2 changes:
> DEL spl_debug outputs if mem test fails/passes
> CHG CONFIG_PRELOADER to CONFIG_SPL_BUILD
>
> V3 changes:
> nothing
>
> V4 changes:
> nothing
>
> V5 changes:
> nothing
>
> V6 changes:
> nothing
>
> Transition from V1 to V2 also includes that this patch is now based on
> 	- the new SPL layout by Aneesh V and Daniel Schwierzeck
> 	- the OMAP4 SPL patches by Aneesh V
>
> This is the successor of "[U-Boot,3/5] devkit8000 nand_spl: Add RAM
> configuration independent of x-loader or CH"
> (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102114)
> ---
>   arch/arm/cpu/armv7/omap3/sdrc.c       |   30 ++++++++++++++++++++++++++-
>   arch/arm/include/asm/arch-omap3/mem.h |   36 +++++++++++++++++++++++++++++++++
>   2 files changed, 65 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
> index 2a7970b..dac14d0 100644
> --- a/arch/arm/cpu/armv7/omap3/sdrc.c
> +++ b/arch/arm/cpu/armv7/omap3/sdrc.c
> @@ -8,6 +8,9 @@
>    * Copyright (C) 2004-2010
>    * Texas Instruments Incorporated - http://www.ti.com/
>    *
> + * Copyright (C) 2011
> + * Corscience GmbH&  Co. KG - Simon Schwarz<schwarz@corscience.de>
> + *
>    * Author :
>    *     Vaibhav Hiremath<hvaibhav@ti.com>
>    *
> @@ -133,13 +136,38 @@ void do_sdrc_init(u32 cs, u32 early)
>   		sdelay(0x20000);
>   	}
>
> +#ifdef CONFIG_SPL_BUILD

Is this really specific to SPL. mem_init() should ideally be the same
for SPL and NOR u-boot, right? Maybe you could remove the #ifdef?

I think NOR boot is broken on OMAP3(somebody please correct me if I am
wrong). I think this may be one thing that helps to make it work again.

> +	/* If we use a SPL there is no x-loader nor config header so we have
> +	 * to do the job ourselfs
> +	 */
> +	if (cs == CS0) {
> +		sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
> +
> +		/* General SDRC config */
> +		writel(V_MCFG,&sdrc_base->cs[cs].mcfg);
> +		writel(V_RFR_CTRL,&sdrc_base->cs[cs].rfr_ctrl);
> +
> +		/* AC timings */
> +		writel(V_ACTIMA_165,&sdrc_actim_base0->ctrla);
> +		writel(V_ACTIMB_165,&sdrc_actim_base0->ctrlb);
> +
> +		/* Initialize */
> +		writel(CMD_NOP,&sdrc_base->cs[cs].manual);
> +		writel(CMD_PRECHARGE,&sdrc_base->cs[cs].manual);
> +		writel(CMD_AUTOREFRESH,&sdrc_base->cs[cs].manual);
> +		writel(CMD_AUTOREFRESH,&sdrc_base->cs[cs].manual);
> +
> +		writel(V_MR,&sdrc_base->cs[cs].mr);
> +	}
> +#endif /* CONFIG_SPL_BUILD */


best regards,
Aneesh