* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
@ 2011-08-02 12:37 Reinhard Meyer
2011-08-02 13:23 ` Thomas Petazzoni
2011-08-04 7:52 ` Matthias Fuchs
0 siblings, 2 replies; 7+ messages in thread
From: Reinhard Meyer @ 2011-08-02 12:37 UTC (permalink / raw)
To: u-boot
./MAKEALL at91
--------------------- SUMMARY ----------------------------
Boards compiled: 48
Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash
pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20
TNY_A9260 TNY_A9G20 )
----------------------------------------------------------
Verbose output of broken boards:
Configuring for at91cap9adk board...
at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
ben?tigt von ?all?, zu erstellen. Schluss.
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc - Board: meesc, Options:
AT91SAM9263,SYS_USE_NANDFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc_dataflash - Board: meesc, Options:
AT91SAM9263,SYS_USE_DATAFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9261 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9261_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9263 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9263ek board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9m10g45ek board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9g45 board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for SBC35_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9260 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Best Regards,
Reinhard
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-02 12:37 [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Reinhard Meyer
@ 2011-08-02 13:23 ` Thomas Petazzoni
2011-08-02 13:36 ` Reinhard Meyer
2011-08-04 7:52 ` Matthias Fuchs
1 sibling, 1 reply; 7+ messages in thread
From: Thomas Petazzoni @ 2011-08-02 13:23 UTC (permalink / raw)
To: u-boot
Le Tue, 02 Aug 2011 12:37:41 +0000,
Reinhard Meyer <u-boot@emk-elektronik.de> a ?crit :
> Configuring for at91sam9m10g45ek board...
For this board there are patches from Alex Waterman, sent on June,
30th. They fix the compilation, and they mostly work (there is an issue
with the Ethernet device, though).
Since Alex hasn't posted an updated version of his patch set since one
month, should I take his patch set, fix the comments you made at that
time and send an updated version ?
(I have the AT91SAM9M10G45-EK platform on my desk here).
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-02 13:23 ` Thomas Petazzoni
@ 2011-08-02 13:36 ` Reinhard Meyer
2011-08-03 2:08 ` Hong Xu
0 siblings, 1 reply; 7+ messages in thread
From: Reinhard Meyer @ 2011-08-02 13:36 UTC (permalink / raw)
To: u-boot
Dear Thomas Petazzoni,
> Le Tue, 02 Aug 2011 12:37:41 +0000,
> Reinhard Meyer <u-boot@emk-elektronik.de> a ?crit :
>
> > Configuring for at91sam9m10g45ek board...
>
> For this board there are patches from Alex Waterman, sent on June,
> 30th. They fix the compilation, and they mostly work (there is an issue
> with the Ethernet device, though).
>
> Since Alex hasn't posted an updated version of his patch set since one
> month, should I take his patch set, fix the comments you made at that
> time and send an updated version ?
>
> (I have the AT91SAM9M10G45-EK platform on my desk here).
Unless Atmel NAKs this approach, I am fine with it.
Please re-base them on current u-boot-atmel/master and provide two
independent patches:
1. for the SoC parts
2. for the board itself
Thanks,
Reinhard
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-02 13:36 ` Reinhard Meyer
@ 2011-08-03 2:08 ` Hong Xu
2011-08-03 7:37 ` Thomas Petazzoni
0 siblings, 1 reply; 7+ messages in thread
From: Hong Xu @ 2011-08-03 2:08 UTC (permalink / raw)
To: u-boot
Hi Reinhard & Thomas,
On 08/02/2011 09:36 PM, Reinhard Meyer wrote:
> Dear Thomas Petazzoni,
> > Le Tue, 02 Aug 2011 12:37:41 +0000,
> > Reinhard Meyer <u-boot@emk-elektronik.de> a ?crit :
> >
> > > Configuring for at91sam9m10g45ek board...
> >
> > For this board there are patches from Alex Waterman, sent on June,
> > 30th. They fix the compilation, and they mostly work (there is an issue
> > with the Ethernet device, though).
> >
> > Since Alex hasn't posted an updated version of his patch set since one
> > month, should I take his patch set, fix the comments you made at that
> > time and send an updated version ?
> >
> > (I have the AT91SAM9M10G45-EK platform on my desk here).
> Unless Atmel NAKs this approach, I am fine with it.
We're OK with this. If Thomas can fix soon, that's good. Or we'll take
over and send out the fixes for Soc and board part.
BR,
Eric
> Please re-base them on current u-boot-atmel/master and provide two
> independent patches:
> 1. for the SoC parts
> 2. for the board itself
>
> Thanks,
> Reinhard
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-03 2:08 ` Hong Xu
@ 2011-08-03 7:37 ` Thomas Petazzoni
2011-08-03 7:43 ` Reinhard Meyer
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Petazzoni @ 2011-08-03 7:37 UTC (permalink / raw)
To: u-boot
Le Wed, 03 Aug 2011 10:08:06 +0800,
Hong Xu <hong.xu@atmel.com> a ?crit :
> > > (I have the AT91SAM9M10G45-EK platform on my desk here).
> > Unless Atmel NAKs this approach, I am fine with it.
>
> We're OK with this. If Thomas can fix soon, that's good. Or we'll
I worked on this yesterday evening, U-Boot in NAND flash configuration
is working, but the code needs more cleanup. I still need to work on
the Dataflash configuration, though.
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-03 7:37 ` Thomas Petazzoni
@ 2011-08-03 7:43 ` Reinhard Meyer
0 siblings, 0 replies; 7+ messages in thread
From: Reinhard Meyer @ 2011-08-03 7:43 UTC (permalink / raw)
To: u-boot
Dear Thomas Petazzoni,
> Le Wed, 03 Aug 2011 10:08:06 +0800,
> Hong Xu<hong.xu@atmel.com> a ?crit :
>
>>> > (I have the AT91SAM9M10G45-EK platform on my desk here).
>>> Unless Atmel NAKs this approach, I am fine with it.
>>
>> We're OK with this. If Thomas can fix soon, that's good. Or we'll
>
> I worked on this yesterday evening, U-Boot in NAND flash configuration
> is working, but the code needs more cleanup. I still need to work on
> the Dataflash configuration, though.
I'd be happy to take a nandflash version; we can add the dataflash lines to
boards.cfg any time later.
Please send a patch first that fixes the SoC files:
at91sam9m10g45_devices.c
at91sam9m10g45.h
at91sam9m10g45_matrix.h
Please make sure they follow the layout of the already fixed files for
9260/9261/9263...
Thank you,
Reinhard
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
2011-08-02 12:37 [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Reinhard Meyer
2011-08-02 13:23 ` Thomas Petazzoni
@ 2011-08-04 7:52 ` Matthias Fuchs
1 sibling, 0 replies; 7+ messages in thread
From: Matthias Fuchs @ 2011-08-04 7:52 UTC (permalink / raw)
To: u-boot
Hi Reinhard,
the patch for meesc has been posted two times now.
Please notice
http://lists.denx.de/pipermail/u-boot/2011-July/096680.html
and this resend of the mentioned patch:
http://lists.denx.de/pipermail/u-boot/2011-July/096679.html
I hope this gets meesc back on the green site.
Matthias
On 02.08.2011 14:37, Reinhard Meyer wrote:
> ./MAKEALL at91
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 48
> Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash
> pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20
> TNY_A9260 TNY_A9G20 )
> ----------------------------------------------------------
>
> Verbose output of broken boards:
>
> Configuring for at91cap9adk board...
> at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your
> board config!
> timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your
> board config!
> make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
> ben?tigt von ?all?, zu erstellen. Schluss.
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for meesc - Board: meesc, Options:
> AT91SAM9263,SYS_USE_NANDFLASH
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for meesc_dataflash - Board: meesc, Options:
> AT91SAM9263,SYS_USE_DATAFLASH
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9261 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
> from lowlevel_init.S:30:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
> note: this is the location of the previous definition
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9261_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9261_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9261_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9263 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from lowlevel_init.S:30:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for at91sam9263ek board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for at91sam9m10g45ek board...
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9g45 board...
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
> note: this is the location of the previous definition
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for SBC35_A9G20 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for TNY_A9260 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for TNY_A9G20 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Best Regards,
> Reinhard
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
Head of System Design
esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit our homepage http://www.esd.eu
Quality Products - Made in Germany
Besuchen Sie uns auf der Hannover Messe 2011
in Halle 9, Stand D13 vom 04.-08. April 2011 in Hannover!
-------------------------------------------------------------------------
Gesch?ftsf?hrer: Klaus Detering
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-08-04 7:52 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-02 12:37 [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Reinhard Meyer
2011-08-02 13:23 ` Thomas Petazzoni
2011-08-02 13:36 ` Reinhard Meyer
2011-08-03 2:08 ` Hong Xu
2011-08-03 7:37 ` Thomas Petazzoni
2011-08-03 7:43 ` Reinhard Meyer
2011-08-04 7:52 ` Matthias Fuchs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox