From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] spear: fix build errors for spear3xx/spear600 platforms
Date: Thu, 04 Aug 2011 13:52:20 +0200 [thread overview]
Message-ID: <4E3A87F4.7010800@aribaud.net> (raw)
In-Reply-To: <1307863977-4002-1-git-send-email-shiraz.hashim@st.com>
Hi Shiraz,
On 12/06/2011 09:32, Shiraz Hashim wrote:
> Signed-off-by: Shiraz Hashim<shiraz.hashim@st.com>
> ---
> Only build tested.
>
> board/spear/common/spr_misc.c | 10 +++++++---
> include/configs/spear-common.h | 12 ++++++++++++
> 2 files changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
> index 0562222..0812c20 100644
> --- a/board/spear/common/spr_misc.c
> +++ b/board/spear/common/spr_misc.c
> @@ -46,9 +46,7 @@ int dram_init(void)
> struct xloader_table_1_2 *table_1_2;
> struct chip_data *chip =&chip_data;
>
> - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
> - PHYS_SDRAM_1_MAXSIZE);
> + gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
>
> if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
> table_1_1 =&xloader_tb->table.table_1_1;
> @@ -66,6 +64,12 @@ int dram_init(void)
> return 0;
> }
>
> +void dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = gd->ram_size;
> +}
> +
> int misc_init_r(void)
> {
> #if defined(CONFIG_CMD_NET)
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> index 4e5bdea..55d19b5 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -86,6 +86,8 @@
> #define CONFIG_SYS_LOADS_BAUD_CHANGE
>
> /* NAND FLASH Configuration */
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> #define CONFIG_NAND_SPEAR 1
> #define CONFIG_SYS_MAX_NAND_DEVICE 1
> #define CONFIG_MTD_NAND_VERIFY_WRITE 1
> @@ -209,4 +211,14 @@
> #define PHYS_SDRAM_1 0x00000000
> #define PHYS_SDRAM_1_MAXSIZE 0x40000000
>
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
> +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> #endif
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2011-08-04 11:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-12 7:32 [U-Boot] [PATCH] spear: fix build errors for spear3xx/spear600 platforms Shiraz Hashim
2011-07-16 10:45 ` Albert ARIBAUD
2011-08-04 9:17 ` Albert ARIBAUD
2011-08-04 10:50 ` Vipin Kumar
2011-08-04 11:52 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3A87F4.7010800@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox